| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include "common.h" |
| |
| /* |
| * struct |
| */ |
| struct usbhsg_request { |
| struct usb_request req; |
| struct usbhs_pkt pkt; |
| }; |
| |
| #define EP_NAME_SIZE 8 |
| struct usbhsg_gpriv; |
| struct usbhsg_uep { |
| struct usb_ep ep; |
| struct usbhs_pipe *pipe; |
| |
| char ep_name[EP_NAME_SIZE]; |
| |
| struct usbhsg_gpriv *gpriv; |
| }; |
| |
| struct usbhsg_gpriv { |
| struct usb_gadget gadget; |
| struct usbhs_mod mod; |
| |
| struct usbhsg_uep *uep; |
| int uep_size; |
| |
| struct usb_gadget_driver *driver; |
| struct usb_phy *transceiver; |
| bool vbus_active; |
| |
| u32 status; |
| #define USBHSG_STATUS_STARTED (1 << 0) |
| #define USBHSG_STATUS_REGISTERD (1 << 1) |
| #define USBHSG_STATUS_WEDGE (1 << 2) |
| #define USBHSG_STATUS_SELF_POWERED (1 << 3) |
| #define USBHSG_STATUS_SOFT_CONNECT (1 << 4) |
| }; |
| |
| struct usbhsg_recip_handle { |
| char *name; |
| int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl); |
| int (*interface)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl); |
| int (*endpoint)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl); |
| }; |
| |
| /* |
| * macro |
| */ |
| #define usbhsg_priv_to_gpriv(priv) \ |
| container_of( \ |
| usbhs_mod_get(priv, USBHS_GADGET), \ |
| struct usbhsg_gpriv, mod) |
| |
| #define __usbhsg_for_each_uep(start, pos, g, i) \ |
| for ((i) = start; \ |
| ((i) < (g)->uep_size) && ((pos) = (g)->uep + (i)); \ |
| (i)++) |
| |
| #define usbhsg_for_each_uep(pos, gpriv, i) \ |
| __usbhsg_for_each_uep(1, pos, gpriv, i) |
| |
| #define usbhsg_for_each_uep_with_dcp(pos, gpriv, i) \ |
| __usbhsg_for_each_uep(0, pos, gpriv, i) |
| |
| #define usbhsg_gadget_to_gpriv(g)\ |
| container_of(g, struct usbhsg_gpriv, gadget) |
| |
| #define usbhsg_req_to_ureq(r)\ |
| container_of(r, struct usbhsg_request, req) |
| |
| #define usbhsg_ep_to_uep(e) container_of(e, struct usbhsg_uep, ep) |
| #define usbhsg_gpriv_to_dev(gp) usbhs_priv_to_dev((gp)->mod.priv) |
| #define usbhsg_gpriv_to_priv(gp) ((gp)->mod.priv) |
| #define usbhsg_gpriv_to_dcp(gp) ((gp)->uep) |
| #define usbhsg_gpriv_to_nth_uep(gp, i) ((gp)->uep + i) |
| #define usbhsg_uep_to_gpriv(u) ((u)->gpriv) |
| #define usbhsg_uep_to_pipe(u) ((u)->pipe) |
| #define usbhsg_pipe_to_uep(p) ((p)->mod_private) |
| #define usbhsg_is_dcp(u) ((u) == usbhsg_gpriv_to_dcp((u)->gpriv)) |
| |
| #define usbhsg_ureq_to_pkt(u) (&(u)->pkt) |
| #define usbhsg_pkt_to_ureq(i) \ |
| container_of(i, struct usbhsg_request, pkt) |
| |
| #define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN) |
| |
| /* status */ |
| #define usbhsg_status_init(gp) do {(gp)->status = 0; } while (0) |
| #define usbhsg_status_set(gp, b) (gp->status |= b) |
| #define usbhsg_status_clr(gp, b) (gp->status &= ~b) |
| #define usbhsg_status_has(gp, b) (gp->status & b) |
| |
| /* |
| * queue push/pop |
| */ |
| static void __usbhsg_queue_pop(struct usbhsg_uep *uep, |
| struct usbhsg_request *ureq, |
| int status) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| |
| if (pipe) |
| dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); |
| |
| ureq->req.status = status; |
| spin_unlock(usbhs_priv_to_lock(priv)); |
| usb_gadget_giveback_request(&uep->ep, &ureq->req); |
| spin_lock(usbhs_priv_to_lock(priv)); |
| } |
| |
| static void usbhsg_queue_pop(struct usbhsg_uep *uep, |
| struct usbhsg_request *ureq, |
| int status) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| unsigned long flags; |
| |
| usbhs_lock(priv, flags); |
| __usbhsg_queue_pop(uep, ureq, status); |
| usbhs_unlock(priv, flags); |
| } |
| |
| static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) |
| { |
| struct usbhs_pipe *pipe = pkt->pipe; |
| struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); |
| struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt); |
| |
| ureq->req.actual = pkt->actual; |
| |
| usbhsg_queue_pop(uep, ureq, 0); |
| } |
| |
| static void usbhsg_queue_push(struct usbhsg_uep *uep, |
| struct usbhsg_request *ureq) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| struct usbhs_pkt *pkt = usbhsg_ureq_to_pkt(ureq); |
| struct usb_request *req = &ureq->req; |
| |
| req->actual = 0; |
| req->status = -EINPROGRESS; |
| usbhs_pkt_push(pipe, pkt, usbhsg_queue_done, |
| req->buf, req->length, req->zero, -1); |
| usbhs_pkt_start(pipe); |
| |
| dev_dbg(dev, "pipe %d : queue push (%d)\n", |
| usbhs_pipe_number(pipe), |
| req->length); |
| } |
| |
| /* |
| * dma map/unmap |
| */ |
| static int usbhsg_dma_map_ctrl(struct usbhs_pkt *pkt, int map) |
| { |
| struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt); |
| struct usb_request *req = &ureq->req; |
| struct usbhs_pipe *pipe = pkt->pipe; |
| struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| enum dma_data_direction dir; |
| int ret = 0; |
| |
| dir = usbhs_pipe_is_dir_host(pipe); |
| |
| if (map) { |
| /* it can not use scatter/gather */ |
| WARN_ON(req->num_sgs); |
| |
| ret = usb_gadget_map_request(&gpriv->gadget, req, dir); |
| if (ret < 0) |
| return ret; |
| |
| pkt->dma = req->dma; |
| } else { |
| usb_gadget_unmap_request(&gpriv->gadget, req, dir); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * USB_TYPE_STANDARD / clear feature functions |
| */ |
| static int usbhsg_recip_handler_std_control_done(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); |
| |
| usbhs_dcp_control_transfer_done(pipe); |
| |
| return 0; |
| } |
| |
| static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| |
| if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) { |
| usbhs_pipe_disable(pipe); |
| usbhs_pipe_sequence_data0(pipe); |
| usbhs_pipe_enable(pipe); |
| } |
| |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); |
| |
| usbhs_pkt_start(pipe); |
| |
| return 0; |
| } |
| |
| static struct usbhsg_recip_handle req_clear_feature = { |
| .name = "clear feature", |
| .device = usbhsg_recip_handler_std_control_done, |
| .interface = usbhsg_recip_handler_std_control_done, |
| .endpoint = usbhsg_recip_handler_std_clear_endpoint, |
| }; |
| |
| /* |
| * USB_TYPE_STANDARD / set feature functions |
| */ |
| static int usbhsg_recip_handler_std_set_device(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| switch (le16_to_cpu(ctrl->wValue)) { |
| case USB_DEVICE_TEST_MODE: |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); |
| udelay(100); |
| usbhs_sys_set_test_mode(priv, le16_to_cpu(ctrl->wIndex >> 8)); |
| break; |
| default: |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int usbhsg_recip_handler_std_set_endpoint(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| |
| usbhs_pipe_stall(pipe); |
| |
| usbhsg_recip_handler_std_control_done(priv, uep, ctrl); |
| |
| return 0; |
| } |
| |
| static struct usbhsg_recip_handle req_set_feature = { |
| .name = "set feature", |
| .device = usbhsg_recip_handler_std_set_device, |
| .interface = usbhsg_recip_handler_std_control_done, |
| .endpoint = usbhsg_recip_handler_std_set_endpoint, |
| }; |
| |
| /* |
| * USB_TYPE_STANDARD / get status functions |
| */ |
| static void __usbhsg_recip_send_complete(struct usb_ep *ep, |
| struct usb_request *req) |
| { |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| |
| /* free allocated recip-buffer/usb_request */ |
| kfree(ureq->pkt.buf); |
| usb_ep_free_request(ep, req); |
| } |
| |
| static void __usbhsg_recip_send_status(struct usbhsg_gpriv *gpriv, |
| unsigned short status) |
| { |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| struct usb_request *req; |
| unsigned short *buf; |
| |
| /* alloc new usb_request for recip */ |
| req = usb_ep_alloc_request(&dcp->ep, GFP_ATOMIC); |
| if (!req) { |
| dev_err(dev, "recip request allocation fail\n"); |
| return; |
| } |
| |
| /* alloc recip data buffer */ |
| buf = kmalloc(sizeof(*buf), GFP_ATOMIC); |
| if (!buf) { |
| usb_ep_free_request(&dcp->ep, req); |
| dev_err(dev, "recip data allocation fail\n"); |
| return; |
| } |
| |
| /* recip data is status */ |
| *buf = cpu_to_le16(status); |
| |
| /* allocated usb_request/buffer will be freed */ |
| req->complete = __usbhsg_recip_send_complete; |
| req->buf = buf; |
| req->length = sizeof(*buf); |
| req->zero = 0; |
| |
| /* push packet */ |
| pipe->handler = &usbhs_fifo_pio_push_handler; |
| usbhsg_queue_push(dcp, usbhsg_req_to_ureq(req)); |
| } |
| |
| static int usbhsg_recip_handler_std_get_device(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| unsigned short status = 0; |
| |
| if (usbhsg_status_has(gpriv, USBHSG_STATUS_SELF_POWERED)) |
| status = 1 << USB_DEVICE_SELF_POWERED; |
| |
| __usbhsg_recip_send_status(gpriv, status); |
| |
| return 0; |
| } |
| |
| static int usbhsg_recip_handler_std_get_interface(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| unsigned short status = 0; |
| |
| __usbhsg_recip_send_status(gpriv, status); |
| |
| return 0; |
| } |
| |
| static int usbhsg_recip_handler_std_get_endpoint(struct usbhs_priv *priv, |
| struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| unsigned short status = 0; |
| |
| if (usbhs_pipe_is_stall(pipe)) |
| status = 1 << USB_ENDPOINT_HALT; |
| |
| __usbhsg_recip_send_status(gpriv, status); |
| |
| return 0; |
| } |
| |
| static struct usbhsg_recip_handle req_get_status = { |
| .name = "get status", |
| .device = usbhsg_recip_handler_std_get_device, |
| .interface = usbhsg_recip_handler_std_get_interface, |
| .endpoint = usbhsg_recip_handler_std_get_endpoint, |
| }; |
| |
| /* |
| * USB_TYPE handler |
| */ |
| static int usbhsg_recip_run_handle(struct usbhs_priv *priv, |
| struct usbhsg_recip_handle *handler, |
| struct usb_ctrlrequest *ctrl) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| struct usbhsg_uep *uep; |
| struct usbhs_pipe *pipe; |
| int recip = ctrl->bRequestType & USB_RECIP_MASK; |
| int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; |
| int ret = 0; |
| int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| struct usb_ctrlrequest *ctrl); |
| char *msg; |
| |
| uep = usbhsg_gpriv_to_nth_uep(gpriv, nth); |
| pipe = usbhsg_uep_to_pipe(uep); |
| if (!pipe) { |
| dev_err(dev, "wrong recip request\n"); |
| return -EINVAL; |
| } |
| |
| switch (recip) { |
| case USB_RECIP_DEVICE: |
| msg = "DEVICE"; |
| func = handler->device; |
| break; |
| case USB_RECIP_INTERFACE: |
| msg = "INTERFACE"; |
| func = handler->interface; |
| break; |
| case USB_RECIP_ENDPOINT: |
| msg = "ENDPOINT"; |
| func = handler->endpoint; |
| break; |
| default: |
| dev_warn(dev, "unsupported RECIP(%d)\n", recip); |
| func = NULL; |
| ret = -EINVAL; |
| } |
| |
| if (func) { |
| dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg); |
| ret = func(priv, uep, ctrl); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * irq functions |
| * |
| * it will be called from usbhs_interrupt |
| */ |
| static int usbhsg_irq_dev_state(struct usbhs_priv *priv, |
| struct usbhs_irq_state *irq_state) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| |
| gpriv->gadget.speed = usbhs_bus_get_speed(priv); |
| |
| dev_dbg(dev, "state = %x : speed : %d\n", |
| usbhs_status_get_device_state(irq_state), |
| gpriv->gadget.speed); |
| |
| return 0; |
| } |
| |
| static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv, |
| struct usbhs_irq_state *irq_state) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| struct usb_ctrlrequest ctrl; |
| struct usbhsg_recip_handle *recip_handler = NULL; |
| int stage = usbhs_status_get_ctrl_stage(irq_state); |
| int ret = 0; |
| |
| dev_dbg(dev, "stage = %d\n", stage); |
| |
| /* |
| * see Manual |
| * |
| * "Operation" |
| * - "Interrupt Function" |
| * - "Control Transfer Stage Transition Interrupt" |
| * - Fig. "Control Transfer Stage Transitions" |
| */ |
| |
| switch (stage) { |
| case READ_DATA_STAGE: |
| pipe->handler = &usbhs_fifo_pio_push_handler; |
| break; |
| case WRITE_DATA_STAGE: |
| pipe->handler = &usbhs_fifo_pio_pop_handler; |
| break; |
| case NODATA_STATUS_STAGE: |
| pipe->handler = &usbhs_ctrl_stage_end_handler; |
| break; |
| case READ_STATUS_STAGE: |
| case WRITE_STATUS_STAGE: |
| usbhs_dcp_control_transfer_done(pipe); |
| default: |
| return ret; |
| } |
| |
| /* |
| * get usb request |
| */ |
| usbhs_usbreq_get_val(priv, &ctrl); |
| |
| switch (ctrl.bRequestType & USB_TYPE_MASK) { |
| case USB_TYPE_STANDARD: |
| switch (ctrl.bRequest) { |
| case USB_REQ_CLEAR_FEATURE: |
| recip_handler = &req_clear_feature; |
| break; |
| case USB_REQ_SET_FEATURE: |
| recip_handler = &req_set_feature; |
| break; |
| case USB_REQ_GET_STATUS: |
| recip_handler = &req_get_status; |
| break; |
| } |
| } |
| |
| /* |
| * setup stage / run recip |
| */ |
| if (recip_handler) |
| ret = usbhsg_recip_run_handle(priv, recip_handler, &ctrl); |
| else |
| ret = gpriv->driver->setup(&gpriv->gadget, &ctrl); |
| |
| if (ret < 0) |
| usbhs_pipe_stall(pipe); |
| |
| return ret; |
| } |
| |
| /* |
| * |
| * usb_dcp_ops |
| * |
| */ |
| static int usbhsg_pipe_disable(struct usbhsg_uep *uep) |
| { |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| struct usbhs_pkt *pkt; |
| |
| while (1) { |
| pkt = usbhs_pkt_pop(pipe, NULL); |
| if (!pkt) |
| break; |
| |
| usbhsg_queue_pop(uep, usbhsg_pkt_to_ureq(pkt), -ESHUTDOWN); |
| } |
| |
| usbhs_pipe_disable(pipe); |
| |
| return 0; |
| } |
| |
| /* |
| * |
| * usb_ep_ops |
| * |
| */ |
| static int usbhsg_ep_enable(struct usb_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| struct usbhs_pipe *pipe; |
| int ret = -EIO; |
| |
| /* |
| * if it already have pipe, |
| * nothing to do |
| */ |
| if (uep->pipe) { |
| usbhs_pipe_clear(uep->pipe); |
| usbhs_pipe_sequence_data0(uep->pipe); |
| return 0; |
| } |
| |
| pipe = usbhs_pipe_malloc(priv, |
| usb_endpoint_type(desc), |
| usb_endpoint_dir_in(desc)); |
| if (pipe) { |
| uep->pipe = pipe; |
| pipe->mod_private = uep; |
| |
| /* set epnum / maxp */ |
| usbhs_pipe_config_update(pipe, 0, |
| usb_endpoint_num(desc), |
| usb_endpoint_maxp(desc)); |
| |
| /* |
| * usbhs_fifo_dma_push/pop_handler try to |
| * use dmaengine if possible. |
| * It will use pio handler if impossible. |
| */ |
| if (usb_endpoint_dir_in(desc)) |
| pipe->handler = &usbhs_fifo_dma_push_handler; |
| else |
| pipe->handler = &usbhs_fifo_dma_pop_handler; |
| |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int usbhsg_ep_disable(struct usb_ep *ep) |
| { |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| |
| if (!pipe) |
| return -EINVAL; |
| |
| usbhsg_pipe_disable(uep); |
| usbhs_pipe_free(pipe); |
| |
| uep->pipe->mod_private = NULL; |
| uep->pipe = NULL; |
| |
| return 0; |
| } |
| |
| static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep, |
| gfp_t gfp_flags) |
| { |
| struct usbhsg_request *ureq; |
| |
| ureq = kzalloc(sizeof *ureq, gfp_flags); |
| if (!ureq) |
| return NULL; |
| |
| usbhs_pkt_init(usbhsg_ureq_to_pkt(ureq)); |
| |
| return &ureq->req; |
| } |
| |
| static void usbhsg_ep_free_request(struct usb_ep *ep, |
| struct usb_request *req) |
| { |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| |
| WARN_ON(!list_empty(&ureq->pkt.node)); |
| kfree(ureq); |
| } |
| |
| static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req, |
| gfp_t gfp_flags) |
| { |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| |
| /* param check */ |
| if (usbhsg_is_not_connected(gpriv) || |
| unlikely(!gpriv->driver) || |
| unlikely(!pipe)) |
| return -ESHUTDOWN; |
| |
| usbhsg_queue_push(uep, ureq); |
| |
| return 0; |
| } |
| |
| static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| |
| if (pipe) |
| usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq)); |
| |
| /* |
| * To dequeue a request, this driver should call the usbhsg_queue_pop() |
| * even if the pipe is NULL. |
| */ |
| usbhsg_queue_pop(uep, ureq, -ECONNRESET); |
| |
| return 0; |
| } |
| |
| static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) |
| { |
| struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| unsigned long flags; |
| |
| usbhsg_pipe_disable(uep); |
| |
| dev_dbg(dev, "set halt %d (pipe %d)\n", |
| halt, usbhs_pipe_number(pipe)); |
| |
| /******************** spin lock ********************/ |
| usbhs_lock(priv, flags); |
| |
| if (halt) |
| usbhs_pipe_stall(pipe); |
| else |
| usbhs_pipe_disable(pipe); |
| |
| if (halt && wedge) |
| usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE); |
| else |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE); |
| |
| usbhs_unlock(priv, flags); |
| /******************** spin unlock ******************/ |
| |
| return 0; |
| } |
| |
| static int usbhsg_ep_set_halt(struct usb_ep *ep, int value) |
| { |
| return __usbhsg_ep_set_halt_wedge(ep, value, 0); |
| } |
| |
| static int usbhsg_ep_set_wedge(struct usb_ep *ep) |
| { |
| return __usbhsg_ep_set_halt_wedge(ep, 1, 1); |
| } |
| |
| static struct usb_ep_ops usbhsg_ep_ops = { |
| .enable = usbhsg_ep_enable, |
| .disable = usbhsg_ep_disable, |
| |
| .alloc_request = usbhsg_ep_alloc_request, |
| .free_request = usbhsg_ep_free_request, |
| |
| .queue = usbhsg_ep_queue, |
| .dequeue = usbhsg_ep_dequeue, |
| |
| .set_halt = usbhsg_ep_set_halt, |
| .set_wedge = usbhsg_ep_set_wedge, |
| }; |
| |
| /* |
| * pullup control |
| */ |
| static int usbhsg_can_pullup(struct usbhs_priv *priv) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| |
| return gpriv->driver && |
| usbhsg_status_has(gpriv, USBHSG_STATUS_SOFT_CONNECT); |
| } |
| |
| static void usbhsg_update_pullup(struct usbhs_priv *priv) |
| { |
| if (usbhsg_can_pullup(priv)) |
| usbhs_sys_function_pullup(priv, 1); |
| else |
| usbhs_sys_function_pullup(priv, 0); |
| } |
| |
| /* |
| * usb module start/end |
| */ |
| static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| unsigned long flags; |
| int ret = 0; |
| |
| /******************** spin lock ********************/ |
| usbhs_lock(priv, flags); |
| |
| usbhsg_status_set(gpriv, status); |
| if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && |
| usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))) |
| ret = -1; /* not ready */ |
| |
| usbhs_unlock(priv, flags); |
| /******************** spin unlock ********************/ |
| |
| if (ret < 0) |
| return 0; /* not ready is not error */ |
| |
| /* |
| * enable interrupt and systems if ready |
| */ |
| dev_dbg(dev, "start gadget\n"); |
| |
| /* |
| * pipe initialize and enable DCP |
| */ |
| usbhs_fifo_init(priv); |
| usbhs_pipe_init(priv, |
| usbhsg_dma_map_ctrl); |
| |
| /* dcp init instead of usbhsg_ep_enable() */ |
| dcp->pipe = usbhs_dcp_malloc(priv); |
| dcp->pipe->mod_private = dcp; |
| usbhs_pipe_config_update(dcp->pipe, 0, 0, 64); |
| |
| /* |
| * system config enble |
| * - HI speed |
| * - function |
| * - usb module |
| */ |
| usbhs_sys_function_ctrl(priv, 1); |
| usbhsg_update_pullup(priv); |
| |
| /* |
| * enable irq callback |
| */ |
| mod->irq_dev_state = usbhsg_irq_dev_state; |
| mod->irq_ctrl_stage = usbhsg_irq_ctrl_stage; |
| usbhs_irq_callback_update(priv, mod); |
| |
| return 0; |
| } |
| |
| static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| unsigned long flags; |
| int ret = 0; |
| |
| /******************** spin lock ********************/ |
| usbhs_lock(priv, flags); |
| |
| usbhsg_status_clr(gpriv, status); |
| if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && |
| !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)) |
| ret = -1; /* already done */ |
| |
| usbhs_unlock(priv, flags); |
| /******************** spin unlock ********************/ |
| |
| if (ret < 0) |
| return 0; /* already done is not error */ |
| |
| /* |
| * disable interrupt and systems if 1st try |
| */ |
| usbhs_fifo_quit(priv); |
| |
| /* disable all irq */ |
| mod->irq_dev_state = NULL; |
| mod->irq_ctrl_stage = NULL; |
| usbhs_irq_callback_update(priv, mod); |
| |
| gpriv->gadget.speed = USB_SPEED_UNKNOWN; |
| |
| /* disable sys */ |
| usbhs_sys_set_test_mode(priv, 0); |
| usbhs_sys_function_ctrl(priv, 0); |
| |
| usbhsg_ep_disable(&dcp->ep); |
| |
| dev_dbg(dev, "stop gadget\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * VBUS provided by the PHY |
| */ |
| static int usbhsm_phy_get_vbus(struct platform_device *pdev) |
| { |
| struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| |
| return gpriv->vbus_active; |
| } |
| |
| static void usbhs_mod_phy_mode(struct usbhs_priv *priv) |
| { |
| struct usbhs_mod_info *info = &priv->mod_info; |
| |
| info->irq_vbus = NULL; |
| priv->pfunc.get_vbus = usbhsm_phy_get_vbus; |
| |
| usbhs_irq_callback_update(priv, NULL); |
| } |
| |
| /* |
| * |
| * linux usb function |
| * |
| */ |
| static int usbhsg_gadget_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int ret; |
| |
| if (!driver || |
| !driver->setup || |
| driver->max_speed < USB_SPEED_FULL) |
| return -EINVAL; |
| |
| /* connect to bus through transceiver */ |
| if (!IS_ERR_OR_NULL(gpriv->transceiver)) { |
| ret = otg_set_peripheral(gpriv->transceiver->otg, |
| &gpriv->gadget); |
| if (ret) { |
| dev_err(dev, "%s: can't bind to transceiver\n", |
| gpriv->gadget.name); |
| return ret; |
| } |
| |
| /* get vbus using phy versions */ |
| usbhs_mod_phy_mode(priv); |
| } |
| |
| /* first hook up the driver ... */ |
| gpriv->driver = driver; |
| |
| return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); |
| } |
| |
| static int usbhsg_gadget_stop(struct usb_gadget *gadget) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| |
| usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); |
| |
| if (!IS_ERR_OR_NULL(gpriv->transceiver)) |
| otg_set_peripheral(gpriv->transceiver->otg, NULL); |
| |
| gpriv->driver = NULL; |
| |
| return 0; |
| } |
| |
| /* |
| * usb gadget ops |
| */ |
| static int usbhsg_get_frame(struct usb_gadget *gadget) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| |
| return usbhs_frame_get_num(priv); |
| } |
| |
| static int usbhsg_pullup(struct usb_gadget *gadget, int is_on) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| unsigned long flags; |
| |
| usbhs_lock(priv, flags); |
| if (is_on) |
| usbhsg_status_set(gpriv, USBHSG_STATUS_SOFT_CONNECT); |
| else |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_SOFT_CONNECT); |
| usbhsg_update_pullup(priv); |
| usbhs_unlock(priv, flags); |
| |
| return 0; |
| } |
| |
| static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| |
| if (is_self) |
| usbhsg_status_set(gpriv, USBHSG_STATUS_SELF_POWERED); |
| else |
| usbhsg_status_clr(gpriv, USBHSG_STATUS_SELF_POWERED); |
| |
| gadget->is_selfpowered = (is_self != 0); |
| |
| return 0; |
| } |
| |
| static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
| |
| gpriv->vbus_active = !!is_active; |
| |
| renesas_usbhs_call_notify_hotplug(pdev); |
| |
| return 0; |
| } |
| |
| static const struct usb_gadget_ops usbhsg_gadget_ops = { |
| .get_frame = usbhsg_get_frame, |
| .set_selfpowered = usbhsg_set_selfpowered, |
| .udc_start = usbhsg_gadget_start, |
| .udc_stop = usbhsg_gadget_stop, |
| .pullup = usbhsg_pullup, |
| .vbus_session = usbhsg_vbus_session, |
| }; |
| |
| static int usbhsg_start(struct usbhs_priv *priv) |
| { |
| return usbhsg_try_start(priv, USBHSG_STATUS_STARTED); |
| } |
| |
| static int usbhsg_stop(struct usbhs_priv *priv) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| |
| /* cable disconnect */ |
| if (gpriv->driver && |
| gpriv->driver->disconnect) |
| gpriv->driver->disconnect(&gpriv->gadget); |
| |
| return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); |
| } |
| |
| int usbhs_mod_gadget_probe(struct usbhs_priv *priv) |
| { |
| struct usbhsg_gpriv *gpriv; |
| struct usbhsg_uep *uep; |
| struct device *dev = usbhs_priv_to_dev(priv); |
| struct renesas_usbhs_driver_pipe_config *pipe_configs = |
| usbhs_get_dparam(priv, pipe_configs); |
| int pipe_size = usbhs_get_dparam(priv, pipe_size); |
| int i; |
| int ret; |
| |
| gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL); |
| if (!gpriv) { |
| dev_err(dev, "Could not allocate gadget priv\n"); |
| return -ENOMEM; |
| } |
| |
| uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL); |
| if (!uep) { |
| dev_err(dev, "Could not allocate ep\n"); |
| ret = -ENOMEM; |
| goto usbhs_mod_gadget_probe_err_gpriv; |
| } |
| |
| gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); |
| dev_info(dev, "%stransceiver found\n", |
| gpriv->transceiver ? "" : "no "); |
| |
| /* |
| * CAUTION |
| * |
| * There is no guarantee that it is possible to access usb module here. |
| * Don't accesses to it. |
| * The accesse will be enable after "usbhsg_start" |
| */ |
| |
| /* |
| * register itself |
| */ |
| usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET); |
| |
| /* init gpriv */ |
| gpriv->mod.name = "gadget"; |
| gpriv->mod.start = usbhsg_start; |
| gpriv->mod.stop = usbhsg_stop; |
| gpriv->uep = uep; |
| gpriv->uep_size = pipe_size; |
| usbhsg_status_init(gpriv); |
| |
| /* |
| * init gadget |
| */ |
| gpriv->gadget.dev.parent = dev; |
| gpriv->gadget.name = "renesas_usbhs_udc"; |
| gpriv->gadget.ops = &usbhsg_gadget_ops; |
| gpriv->gadget.max_speed = USB_SPEED_HIGH; |
| |
| INIT_LIST_HEAD(&gpriv->gadget.ep_list); |
| |
| /* |
| * init usb_ep |
| */ |
| usbhsg_for_each_uep_with_dcp(uep, gpriv, i) { |
| uep->gpriv = gpriv; |
| uep->pipe = NULL; |
| snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i); |
| |
| uep->ep.name = uep->ep_name; |
| uep->ep.ops = &usbhsg_ep_ops; |
| INIT_LIST_HEAD(&uep->ep.ep_list); |
| |
| /* init DCP */ |
| if (usbhsg_is_dcp(uep)) { |
| gpriv->gadget.ep0 = &uep->ep; |
| usb_ep_set_maxpacket_limit(&uep->ep, 64); |
| uep->ep.caps.type_control = true; |
| } else { |
| /* init normal pipe */ |
| if (pipe_configs[i].type == USB_ENDPOINT_XFER_ISOC) |
| uep->ep.caps.type_iso = true; |
| if (pipe_configs[i].type == USB_ENDPOINT_XFER_BULK) |
| uep->ep.caps.type_bulk = true; |
| if (pipe_configs[i].type == USB_ENDPOINT_XFER_INT) |
| uep->ep.caps.type_int = true; |
| usb_ep_set_maxpacket_limit(&uep->ep, |
| pipe_configs[i].bufsize); |
| list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list); |
| } |
| uep->ep.caps.dir_in = true; |
| uep->ep.caps.dir_out = true; |
| } |
| |
| ret = usb_add_gadget_udc(dev, &gpriv->gadget); |
| if (ret) |
| goto err_add_udc; |
| |
| |
| dev_info(dev, "gadget probed\n"); |
| |
| return 0; |
| |
| err_add_udc: |
| kfree(gpriv->uep); |
| |
| usbhs_mod_gadget_probe_err_gpriv: |
| kfree(gpriv); |
| |
| return ret; |
| } |
| |
| void usbhs_mod_gadget_remove(struct usbhs_priv *priv) |
| { |
| struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| |
| usb_del_gadget_udc(&gpriv->gadget); |
| |
| kfree(gpriv->uep); |
| kfree(gpriv); |
| } |