nl80211/cfg80211: add 5 and 10 MHz defines and wiphy flag
Add defines for 5 and 10 MHz channel width and fix channel
handling functions accordingly.
Also check for and report the WIPHY_FLAG_SUPPORTS_5_10_MHZ
capability.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix spelling in comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6a43c34..316f34b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2342,6 +2342,7 @@
* responds to probe-requests in hardware.
* @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
* @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
+ * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels.
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -2365,6 +2366,7 @@
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19),
WIPHY_FLAG_OFFCHAN_TX = BIT(20),
WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21),
+ WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22),
};
/**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index ca6facf..861e5eb 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2758,6 +2758,8 @@
* and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well
* @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
* attribute must be provided as well
+ * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel
+ * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel
*/
enum nl80211_chan_width {
NL80211_CHAN_WIDTH_20_NOHT,
@@ -2766,6 +2768,8 @@
NL80211_CHAN_WIDTH_80,
NL80211_CHAN_WIDTH_80P80,
NL80211_CHAN_WIDTH_160,
+ NL80211_CHAN_WIDTH_5,
+ NL80211_CHAN_WIDTH_10,
};
/**
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index fd556ac..50f6195 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -54,6 +54,8 @@
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
if (chandef->center_freq1 != control_freq)
@@ -152,6 +154,12 @@
int width;
switch (c->width) {
+ case NL80211_CHAN_WIDTH_5:
+ width = 5;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ width = 10;
+ break;
case NL80211_CHAN_WIDTH_20:
case NL80211_CHAN_WIDTH_20_NOHT:
width = 20;
@@ -194,6 +202,16 @@
if (c1->width == c2->width)
return NULL;
+ /*
+ * can't be compatible if one of them is 5 or 10 MHz,
+ * but they don't have the same width.
+ */
+ if (c1->width == NL80211_CHAN_WIDTH_5 ||
+ c1->width == NL80211_CHAN_WIDTH_10 ||
+ c2->width == NL80211_CHAN_WIDTH_5 ||
+ c2->width == NL80211_CHAN_WIDTH_10)
+ return NULL;
+
if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
c1->width == NL80211_CHAN_WIDTH_20)
return c2;
@@ -264,11 +282,17 @@
u32 bandwidth)
{
struct ieee80211_channel *c;
- u32 freq;
+ u32 freq, start_freq, end_freq;
- for (freq = center_freq - bandwidth/2 + 10;
- freq <= center_freq + bandwidth/2 - 10;
- freq += 20) {
+ if (bandwidth <= 20) {
+ start_freq = center_freq;
+ end_freq = center_freq;
+ } else {
+ start_freq = center_freq - bandwidth/2 + 10;
+ end_freq = center_freq + bandwidth/2 - 10;
+ }
+
+ for (freq = start_freq; freq <= end_freq; freq += 20) {
c = ieee80211_get_channel(wiphy, freq);
if (!c)
return -EINVAL;
@@ -310,11 +334,17 @@
u32 prohibited_flags)
{
struct ieee80211_channel *c;
- u32 freq;
+ u32 freq, start_freq, end_freq;
- for (freq = center_freq - bandwidth/2 + 10;
- freq <= center_freq + bandwidth/2 - 10;
- freq += 20) {
+ if (bandwidth <= 20) {
+ start_freq = center_freq;
+ end_freq = center_freq;
+ } else {
+ start_freq = center_freq - bandwidth/2 + 10;
+ end_freq = center_freq + bandwidth/2 - 10;
+ }
+
+ for (freq = start_freq; freq <= end_freq; freq += 20) {
c = ieee80211_get_channel(wiphy, freq);
if (!c)
return false;
@@ -349,6 +379,12 @@
control_freq = chandef->chan->center_freq;
switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_5:
+ width = 5;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ width = 10;
+ break;
case NL80211_CHAN_WIDTH_20:
if (!ht_cap->ht_supported)
return false;
@@ -405,6 +441,11 @@
if (width > 20)
prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+ /* 5 and 10 MHz are only defined for the OFDM PHY */
+ if (width < 20)
+ prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+
+
if (!cfg80211_secondary_chans_ok(wiphy, chandef->center_freq1,
width, prohibited_flags))
return false;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1c4f7da..4ab1ffa 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1188,6 +1188,9 @@
if ((dev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP) &&
nla_put_flag(msg, NL80211_ATTR_TDLS_EXTERNAL_SETUP))
goto nla_put_failure;
+ if ((dev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ) &&
+ nla_put_flag(msg, WIPHY_FLAG_SUPPORTS_5_10_MHZ))
+ goto nla_put_failure;
(*split_start)++;
if (split)
@@ -1731,6 +1734,11 @@
IEEE80211_CHAN_DISABLED))
return -EINVAL;
+ if ((chandef->width == NL80211_CHAN_WIDTH_5 ||
+ chandef->width == NL80211_CHAN_WIDTH_10) &&
+ !(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_5_10_MHZ))
+ return -EINVAL;
+
return 0;
}
@@ -6280,11 +6288,16 @@
if (!cfg80211_reg_can_beacon(&rdev->wiphy, &ibss.chandef))
return -EINVAL;
- if (ibss.chandef.width > NL80211_CHAN_WIDTH_40)
+ switch (ibss.chandef.width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_40:
+ if (rdev->wiphy.features & NL80211_FEATURE_HT_IBSS)
+ break;
+ default:
return -EINVAL;
- if (ibss.chandef.width != NL80211_CHAN_WIDTH_20_NOHT &&
- !(rdev->wiphy.features & NL80211_FEATURE_HT_IBSS))
- return -EINVAL;
+ }
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
ibss.privacy = !!info->attrs[NL80211_ATTR_PRIVACY];