arch/arm/mach-exynos/Makefile

# arch/arm/mach-exynos/Makefile
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
#		http://www.samsung.com/
#
# Licensed under GPLv2

obj-y				:=
obj-m				:=
obj-n				:=
obj-				:=

# Core

obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o

obj-$(CONFIG_PM)		+= pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o

obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o

obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o

obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o

obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o

# machine support

obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o

obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o

obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
obj-$(CONFIG_MACH_EXYNOS5_DT)		+= mach-exynos5-dt.o

# device support

obj-y					+= dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
obj-$(CONFIG_EXYNOS_DEV_DMA)		+= dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
obj-$(CONFIG_EXYNOS_DEV_SYSMMU)		+= dev-sysmmu.o

obj-$(CONFIG_ARCH_EXYNOS)		+= setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2)	+= setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3)	+= setup-i2c3.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C4)	+= setup-i2c4.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C5)	+= setup-i2c5.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C6)	+= setup-i2c6.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
obj-$(CONFIG_EXYNOS_SETUP_SPI)		+= setup-spi.o