| #include <dt-bindings/input/input.h> |
| |
| #include "qcom-msm8960.dtsi" |
| |
| / { |
| model = "Qualcomm MSM8960 CDP"; |
| compatible = "qcom,msm8960-cdp", "qcom,msm8960"; |
| |
| soc { |
| gsbi@16400000 { |
| status = "ok"; |
| qcom,mode = <GSBI_PROT_I2C_UART>; |
| serial@16440000 { |
| status = "ok"; |
| }; |
| }; |
| |
| amba { |
| /* eMMC */ |
| sdcc1: sdcc@12400000 { |
| status = "okay"; |
| }; |
| |
| /* External micro SD card */ |
| sdcc3: sdcc@12180000 { |
| status = "okay"; |
| }; |
| }; |
| |
| rpm@108000 { |
| regulators { |
| compatible = "qcom,rpm-pm8921-regulators"; |
| vin_lvs1_3_6-supply = <&pm8921_s4>; |
| vin_lvs2-supply = <&pm8921_s4>; |
| vin_lvs4_5_7-supply = <&pm8921_s4>; |
| vdd_ncp-supply = <&pm8921_l6>; |
| vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; |
| vdd_l21_l23_l29-supply = <&pm8921_s8>; |
| vdd_l24-supply = <&pm8921_s1>; |
| vdd_l25-supply = <&pm8921_s1>; |
| vdd_l27-supply = <&pm8921_s7>; |
| vdd_l28-supply = <&pm8921_s7>; |
| |
| /* Buck SMPS */ |
| pm8921_s1: s1 { |
| regulator-always-on; |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1225000>; |
| qcom,switch-mode-frequency = <3200000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_s2: s2 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_s3: s3 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,switch-mode-frequency = <4800000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_s4: s4 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; |
| }; |
| |
| pm8921_s7: s7 { |
| regulator-min-microvolt = <1150000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,switch-mode-frequency = <3200000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_s8: s8 { |
| regulator-always-on; |
| regulator-min-microvolt = <2050000>; |
| regulator-max-microvolt = <2050000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| /* PMOS LDO */ |
| pm8921_l1: l1 { |
| regulator-always-on; |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l2: l2 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l3: l3 { |
| regulator-min-microvolt = <3075000>; |
| regulator-max-microvolt = <3075000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l4: l4 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l5: l5 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l6: l6 { |
| regulator-min-microvolt = <2950000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l7: l7 { |
| regulator-always-on; |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l8: l8 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <3000000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l9: l9 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l10: l10 { |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l11: l11 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l12: l12 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l14: l14 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l15: l15 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l16: l16 { |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l17: l17 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l18: l18 { |
| regulator-min-microvolt = <1300000>; |
| regulator-max-microvolt = <1300000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l21: l21 { |
| regulator-min-microvolt = <1900000>; |
| regulator-max-microvolt = <1900000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l22: l22 { |
| regulator-min-microvolt = <2750000>; |
| regulator-max-microvolt = <2750000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l23: l23 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l24: l24 { |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1150000>; |
| bias-pull-down; |
| }; |
| |
| pm8921_l25: l25 { |
| regulator-always-on; |
| regulator-min-microvolt = <1250000>; |
| regulator-max-microvolt = <1250000>; |
| bias-pull-down; |
| }; |
| |
| /* Low Voltage Switch */ |
| pm8921_lvs1: lvs1 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs2: lvs2 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs3: lvs3 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs4: lvs4 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs5: lvs5 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs6: lvs6 { |
| bias-pull-down; |
| }; |
| |
| pm8921_lvs7: lvs7 { |
| bias-pull-down; |
| }; |
| |
| pm8921_ncp: ncp { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| }; |
| }; |
| }; |
| |
| gsbi@16000000 { |
| status = "ok"; |
| qcom,mode = <GSBI_PROT_SPI>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_default>; |
| spi@16080000 { |
| status = "ok"; |
| eth@0 { |
| compatible = "micrel,ks8851"; |
| reg = <0>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <90 8>; |
| spi-max-frequency = <5400000>; |
| vdd-supply = <&ext_l2>; |
| vdd-io-supply = <&pm8921_lvs6>; |
| reset-gpios = <&msmgpio 89 0>; |
| }; |
| }; |
| }; |
| |
| pinctrl@800000 { |
| spi1_default: spi1_default { |
| mux { |
| pins = "gpio6", "gpio7", "gpio9"; |
| function = "gsbi1"; |
| }; |
| |
| mosi { |
| pins = "gpio6"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| miso { |
| pins = "gpio7"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| |
| cs { |
| pins = "gpio8"; |
| drive-strength = <12>; |
| bias-disable; |
| output-low; |
| }; |
| |
| clk { |
| pins = "gpio9"; |
| drive-strength = <12>; |
| bias-disable; |
| }; |
| }; |
| }; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| |
| ext_l2: gpio-regulator@91 { |
| compatible = "regulator-fixed"; |
| regulator-name = "ext_l2"; |
| gpio = <&msmgpio 91 0>; |
| startup-delay-us = <10000>; |
| enable-active-high; |
| }; |
| }; |
| }; |
| |
| &pmicintc { |
| keypad@148 { |
| linux,keymap = < |
| MATRIX_KEY(0, 0, KEY_VOLUMEUP) |
| MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) |
| MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) |
| MATRIX_KEY(0, 3, KEY_CAMERA) |
| >; |
| keypad,num-rows = <1>; |
| keypad,num-columns = <5>; |
| }; |
| }; |