| /* |
| * linux/arch/arm/kernel/irq.c |
| * |
| * Copyright (C) 1992 Linus Torvalds |
| * Modifications for ARM processor Copyright (C) 1995-2000 Russell King. |
| * |
| * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation. |
| * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and |
| * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This file contains the code used by various IRQ handling routines: |
| * asking for different IRQ's should be done through these routines |
| * instead of just grabbing them. Thus setups with different IRQ numbers |
| * shouldn't result in any weird surprises, and installing new handlers |
| * should be easier. |
| * |
| * IRQ's are in fact implemented a bit like signal handlers for the kernel. |
| * Naturally it's not a 1:1 relation, but there are similarities. |
| */ |
| #include <linux/kernel_stat.h> |
| #include <linux/signal.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/random.h> |
| #include <linux/smp.h> |
| #include <linux/init.h> |
| #include <linux/seq_file.h> |
| #include <linux/ratelimit.h> |
| #include <linux/errno.h> |
| #include <linux/list.h> |
| #include <linux/kallsyms.h> |
| #include <linux/proc_fs.h> |
| #include <linux/export.h> |
| |
| #include <asm/hardware/cache-l2x0.h> |
| #include <asm/exception.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/time.h> |
| |
| unsigned long irq_err_count; |
| |
| int arch_show_interrupts(struct seq_file *p, int prec) |
| { |
| #ifdef CONFIG_FIQ |
| show_fiq_list(p, prec); |
| #endif |
| #ifdef CONFIG_SMP |
| show_ipi_list(p, prec); |
| #endif |
| seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count); |
| return 0; |
| } |
| |
| /* |
| * handle_IRQ handles all hardware IRQ's. Decoded IRQs should |
| * not come via this function. Instead, they should provide their |
| * own 'handler'. Used by platform code implementing C-based 1st |
| * level decoding. |
| */ |
| void handle_IRQ(unsigned int irq, struct pt_regs *regs) |
| { |
| __handle_domain_irq(NULL, irq, false, regs); |
| } |
| |
| /* |
| * asm_do_IRQ is the interface to be used from assembly code. |
| */ |
| asmlinkage void __exception_irq_entry |
| asm_do_IRQ(unsigned int irq, struct pt_regs *regs) |
| { |
| handle_IRQ(irq, regs); |
| } |
| |
| void set_irq_flags(unsigned int irq, unsigned int iflags) |
| { |
| unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; |
| |
| if (irq >= nr_irqs) { |
| pr_err("Trying to set irq flags for IRQ%d\n", irq); |
| return; |
| } |
| |
| if (iflags & IRQF_VALID) |
| clr |= IRQ_NOREQUEST; |
| if (iflags & IRQF_PROBE) |
| clr |= IRQ_NOPROBE; |
| if (!(iflags & IRQF_NOAUTOEN)) |
| clr |= IRQ_NOAUTOEN; |
| /* Order is clear bits in "clr" then set bits in "set" */ |
| irq_modify_status(irq, clr, set & ~clr); |
| } |
| EXPORT_SYMBOL_GPL(set_irq_flags); |
| |
| void __init init_IRQ(void) |
| { |
| int ret; |
| |
| if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq) |
| irqchip_init(); |
| else |
| machine_desc->init_irq(); |
| |
| if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) && |
| (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) { |
| if (!outer_cache.write_sec) |
| outer_cache.write_sec = machine_desc->l2c_write_sec; |
| ret = l2x0_of_init(machine_desc->l2c_aux_val, |
| machine_desc->l2c_aux_mask); |
| if (ret) |
| pr_err("L2C: failed to init: %d\n", ret); |
| } |
| } |
| |
| #ifdef CONFIG_MULTI_IRQ_HANDLER |
| void __init set_handle_irq(void (*handle_irq)(struct pt_regs *)) |
| { |
| if (handle_arch_irq) |
| return; |
| |
| handle_arch_irq = handle_irq; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPARSE_IRQ |
| int __init arch_probe_nr_irqs(void) |
| { |
| nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS; |
| return nr_irqs; |
| } |
| #endif |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| static bool migrate_one_irq(struct irq_desc *desc) |
| { |
| struct irq_data *d = irq_desc_get_irq_data(desc); |
| const struct cpumask *affinity = irq_data_get_affinity_mask(d); |
| struct irq_chip *c; |
| bool ret = false; |
| |
| /* |
| * If this is a per-CPU interrupt, or the affinity does not |
| * include this CPU, then we have nothing to do. |
| */ |
| if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity)) |
| return false; |
| |
| if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { |
| affinity = cpu_online_mask; |
| ret = true; |
| } |
| |
| c = irq_data_get_irq_chip(d); |
| if (!c->irq_set_affinity) |
| pr_debug("IRQ%u: unable to set affinity\n", d->irq); |
| else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret) |
| cpumask_copy(irq_data_get_affinity_mask(d), affinity); |
| |
| return ret; |
| } |
| |
| /* |
| * The current CPU has been marked offline. Migrate IRQs off this CPU. |
| * If the affinity settings do not allow other CPUs, force them onto any |
| * available CPU. |
| * |
| * Note: we must iterate over all IRQs, whether they have an attached |
| * action structure or not, as we need to get chained interrupts too. |
| */ |
| void migrate_irqs(void) |
| { |
| unsigned int i; |
| struct irq_desc *desc; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| for_each_irq_desc(i, desc) { |
| bool affinity_broken; |
| |
| raw_spin_lock(&desc->lock); |
| affinity_broken = migrate_one_irq(desc); |
| raw_spin_unlock(&desc->lock); |
| |
| if (affinity_broken) |
| pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n", |
| i, smp_processor_id()); |
| } |
| |
| local_irq_restore(flags); |
| } |
| #endif /* CONFIG_HOTPLUG_CPU */ |