rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()
This saves some 217, or about, derefences of priv->fops.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index c628b90..71145eb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -3886,6 +3886,7 @@
{
struct rtl8xxxu_priv *priv = hw->priv;
struct device *dev = &priv->udev->dev;
+ struct rtl8xxxu_fileops *fops = priv->fops;
bool macpower;
int ret;
u8 val8;
@@ -3904,7 +3905,7 @@
else
macpower = true;
- ret = priv->fops->power_on(priv);
+ ret = fops->power_on(priv);
if (ret < 0) {
dev_warn(dev, "%s: Failed power on\n", __func__);
goto exit;
@@ -3921,7 +3922,7 @@
/*
* Set RX page boundary
*/
- rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, priv->fops->trxff_boundary);
+ rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, fops->trxff_boundary);
ret = rtl8xxxu_download_firmware(priv);
dev_dbg(dev, "%s: download_firmware %i\n", __func__, ret);
@@ -3932,8 +3933,8 @@
if (ret)
goto exit;
- if (priv->fops->phy_init_antenna_selection)
- priv->fops->phy_init_antenna_selection(priv);
+ if (fops->phy_init_antenna_selection)
+ fops->phy_init_antenna_selection(priv);
ret = rtl8xxxu_init_mac(priv);
@@ -3946,7 +3947,7 @@
if (ret)
goto exit;
- ret = priv->fops->init_phy_rf(priv);
+ ret = fops->init_phy_rf(priv);
if (ret)
goto exit;
@@ -3971,7 +3972,7 @@
/*
* Set TX buffer boundary
*/
- val8 = priv->fops->total_page_num + 1;
+ val8 = fops->total_page_num + 1;
rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
@@ -3984,14 +3985,14 @@
* The vendor drivers set PBP for all devices, except 8192e.
* There is no explanation for this in any of the sources.
*/
- val8 = (priv->fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
- (priv->fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
+ val8 = (fops->pbp_rx << PBP_PAGE_SIZE_RX_SHIFT) |
+ (fops->pbp_tx << PBP_PAGE_SIZE_TX_SHIFT);
if (priv->rtl_chip != RTL8192E)
rtl8xxxu_write8(priv, REG_PBP, val8);
dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
if (!macpower) {
- ret = priv->fops->llt_init(priv);
+ ret = fops->llt_init(priv);
if (ret) {
dev_warn(dev, "%s: LLT table init failed\n", __func__);
goto exit;
@@ -4000,12 +4001,12 @@
/*
* Chip specific quirks
*/
- priv->fops->usb_quirks(priv);
+ fops->usb_quirks(priv);
/*
* Enable TX report and TX report timer for 8723bu/8188eu/...
*/
- if (priv->fops->has_tx_report) {
+ if (fops->has_tx_report) {
val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
@@ -4140,8 +4141,8 @@
rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
}
- if (priv->fops->init_aggregation)
- priv->fops->init_aggregation(priv);
+ if (fops->init_aggregation)
+ fops->init_aggregation(priv);
/*
* Enable CCK and OFDM block
@@ -4158,7 +4159,7 @@
/*
* Start out with default power levels for channel 6, 20MHz
*/
- priv->fops->set_tx_power(priv, 1, false);
+ fops->set_tx_power(priv, 1, false);
/* Let the 8051 take control of antenna setting */
if (priv->rtl_chip != RTL8192E) {
@@ -4174,8 +4175,8 @@
rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
- if (priv->fops->init_statistics)
- priv->fops->init_statistics(priv);
+ if (fops->init_statistics)
+ fops->init_statistics(priv);
if (priv->rtl_chip == RTL8192E) {
/*
@@ -4193,12 +4194,12 @@
rtl8723a_phy_lc_calibrate(priv);
- priv->fops->phy_iq_calibrate(priv);
+ fops->phy_iq_calibrate(priv);
/*
* This should enable thermal meter
*/
- if (priv->fops->gen2_thermal_meter)
+ if (fops->gen2_thermal_meter)
rtl8xxxu_write_rfreg(priv,
RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
else