| /* |
| * Copyright (c) 2008-2011 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/nl80211.h> |
| #include <linux/delay.h> |
| #include "ath9k.h" |
| #include "btcoex.h" |
| |
| static void ath9k_set_assoc_state(struct ath_softc *sc, |
| struct ieee80211_vif *vif); |
| |
| u8 ath9k_parse_mpdudensity(u8 mpdudensity) |
| { |
| /* |
| * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": |
| * 0 for no restriction |
| * 1 for 1/4 us |
| * 2 for 1/2 us |
| * 3 for 1 us |
| * 4 for 2 us |
| * 5 for 4 us |
| * 6 for 8 us |
| * 7 for 16 us |
| */ |
| switch (mpdudensity) { |
| case 0: |
| return 0; |
| case 1: |
| case 2: |
| case 3: |
| /* Our lower layer calculations limit our precision to |
| 1 microsecond */ |
| return 1; |
| case 4: |
| return 2; |
| case 5: |
| return 4; |
| case 6: |
| return 8; |
| case 7: |
| return 16; |
| default: |
| return 0; |
| } |
| } |
| |
| static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq) |
| { |
| bool pending = false; |
| |
| spin_lock_bh(&txq->axq_lock); |
| |
| if (txq->axq_depth || !list_empty(&txq->axq_acq)) |
| pending = true; |
| |
| spin_unlock_bh(&txq->axq_lock); |
| return pending; |
| } |
| |
| static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode) |
| { |
| unsigned long flags; |
| bool ret; |
| |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| ret = ath9k_hw_setpower(sc->sc_ah, mode); |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| |
| return ret; |
| } |
| |
| void ath9k_ps_wakeup(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| unsigned long flags; |
| enum ath9k_power_mode power_mode; |
| |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| if (++sc->ps_usecount != 1) |
| goto unlock; |
| |
| power_mode = sc->sc_ah->power_mode; |
| ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE); |
| |
| /* |
| * While the hardware is asleep, the cycle counters contain no |
| * useful data. Better clear them now so that they don't mess up |
| * survey data results. |
| */ |
| if (power_mode != ATH9K_PM_AWAKE) { |
| spin_lock(&common->cc_lock); |
| ath_hw_cycle_counters_update(common); |
| memset(&common->cc_survey, 0, sizeof(common->cc_survey)); |
| memset(&common->cc_ani, 0, sizeof(common->cc_ani)); |
| spin_unlock(&common->cc_lock); |
| } |
| |
| unlock: |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| } |
| |
| void ath9k_ps_restore(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| enum ath9k_power_mode mode; |
| unsigned long flags; |
| bool reset; |
| |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| if (--sc->ps_usecount != 0) |
| goto unlock; |
| |
| if (sc->ps_idle) { |
| ath9k_hw_setrxabort(sc->sc_ah, 1); |
| ath9k_hw_stopdmarecv(sc->sc_ah, &reset); |
| mode = ATH9K_PM_FULL_SLEEP; |
| } else if (sc->ps_enabled && |
| !(sc->ps_flags & (PS_WAIT_FOR_BEACON | |
| PS_WAIT_FOR_CAB | |
| PS_WAIT_FOR_PSPOLL_DATA | |
| PS_WAIT_FOR_TX_ACK | |
| PS_WAIT_FOR_ANI))) { |
| mode = ATH9K_PM_NETWORK_SLEEP; |
| if (ath9k_hw_btcoex_is_enabled(sc->sc_ah)) |
| ath9k_btcoex_stop_gen_timer(sc); |
| } else { |
| goto unlock; |
| } |
| |
| spin_lock(&common->cc_lock); |
| ath_hw_cycle_counters_update(common); |
| spin_unlock(&common->cc_lock); |
| |
| ath9k_hw_setpower(sc->sc_ah, mode); |
| |
| unlock: |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| } |
| |
| static void __ath_cancel_work(struct ath_softc *sc) |
| { |
| cancel_work_sync(&sc->paprd_work); |
| cancel_work_sync(&sc->hw_check_work); |
| cancel_delayed_work_sync(&sc->tx_complete_work); |
| cancel_delayed_work_sync(&sc->hw_pll_work); |
| |
| #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT |
| if (ath9k_hw_mci_is_enabled(sc->sc_ah)) |
| cancel_work_sync(&sc->mci_work); |
| #endif |
| } |
| |
| static void ath_cancel_work(struct ath_softc *sc) |
| { |
| __ath_cancel_work(sc); |
| cancel_work_sync(&sc->hw_reset_work); |
| } |
| |
| static void ath_restart_work(struct ath_softc *sc) |
| { |
| ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); |
| |
| if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9485(sc->sc_ah) || |
| AR_SREV_9550(sc->sc_ah)) |
| ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, |
| msecs_to_jiffies(ATH_PLL_WORK_INTERVAL)); |
| |
| ath_start_rx_poll(sc, 3); |
| ath_start_ani(sc); |
| } |
| |
| static bool ath_prepare_reset(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| bool ret = true; |
| |
| ieee80211_stop_queues(sc->hw); |
| |
| sc->hw_busy_count = 0; |
| ath_stop_ani(sc); |
| del_timer_sync(&sc->rx_poll_timer); |
| |
| ath9k_debug_samp_bb_mac(sc); |
| ath9k_hw_disable_interrupts(ah); |
| |
| if (!ath_drain_all_txq(sc)) |
| ret = false; |
| |
| if (!ath_stoprecv(sc)) |
| ret = false; |
| |
| return ret; |
| } |
| |
| static bool ath_complete_reset(struct ath_softc *sc, bool start) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| unsigned long flags; |
| |
| if (ath_startrecv(sc) != 0) { |
| ath_err(common, "Unable to restart recv logic\n"); |
| return false; |
| } |
| |
| ath9k_cmn_update_txpow(ah, sc->curtxpow, |
| sc->config.txpowlimit, &sc->curtxpow); |
| |
| clear_bit(SC_OP_HW_RESET, &sc->sc_flags); |
| ath9k_hw_set_interrupts(ah); |
| ath9k_hw_enable_interrupts(ah); |
| |
| if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && start) { |
| if (!test_bit(SC_OP_BEACONS, &sc->sc_flags)) |
| goto work; |
| |
| if (ah->opmode == NL80211_IFTYPE_STATION && |
| test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| } else { |
| ath9k_set_beacon(sc); |
| } |
| work: |
| ath_restart_work(sc); |
| } |
| |
| if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) |
| ath_ant_comb_update(sc); |
| |
| ieee80211_wake_queues(sc->hw); |
| |
| return true; |
| } |
| |
| static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath9k_hw_cal_data *caldata = NULL; |
| bool fastcc = true; |
| int r; |
| |
| __ath_cancel_work(sc); |
| |
| tasklet_disable(&sc->intr_tq); |
| spin_lock_bh(&sc->sc_pcu_lock); |
| |
| if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) { |
| fastcc = false; |
| caldata = &sc->caldata; |
| } |
| |
| if (!hchan) { |
| fastcc = false; |
| hchan = ah->curchan; |
| } |
| |
| if (!ath_prepare_reset(sc)) |
| fastcc = false; |
| |
| ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", |
| hchan->channel, IS_CHAN_HT40(hchan), fastcc); |
| |
| r = ath9k_hw_reset(ah, hchan, caldata, fastcc); |
| if (r) { |
| ath_err(common, |
| "Unable to reset channel, reset status %d\n", r); |
| |
| ath9k_hw_enable_interrupts(ah); |
| ath9k_queue_reset(sc, RESET_TYPE_BB_HANG); |
| |
| goto out; |
| } |
| |
| if (ath9k_hw_mci_is_enabled(sc->sc_ah) && |
| (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) |
| ath9k_mci_set_txpower(sc, true, false); |
| |
| if (!ath_complete_reset(sc, true)) |
| r = -EIO; |
| |
| out: |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| tasklet_enable(&sc->intr_tq); |
| |
| return r; |
| } |
| |
| |
| /* |
| * Set/change channels. If the channel is really being changed, it's done |
| * by reseting the chip. To accomplish this we must first cleanup any pending |
| * DMA, then restart stuff. |
| */ |
| static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, |
| struct ath9k_channel *hchan) |
| { |
| int r; |
| |
| if (test_bit(SC_OP_INVALID, &sc->sc_flags)) |
| return -EIO; |
| |
| r = ath_reset_internal(sc, hchan); |
| |
| return r; |
| } |
| |
| static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta, |
| struct ieee80211_vif *vif) |
| { |
| struct ath_node *an; |
| an = (struct ath_node *)sta->drv_priv; |
| |
| an->sc = sc; |
| an->sta = sta; |
| an->vif = vif; |
| |
| ath_tx_node_init(sc, an); |
| |
| if (sta->ht_cap.ht_supported) { |
| an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + |
| sta->ht_cap.ampdu_factor); |
| an->mpdudensity = ath9k_parse_mpdudensity(sta->ht_cap.ampdu_density); |
| } |
| } |
| |
| static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta) |
| { |
| struct ath_node *an = (struct ath_node *)sta->drv_priv; |
| ath_tx_node_cleanup(sc, an); |
| } |
| |
| void ath9k_tasklet(unsigned long data) |
| { |
| struct ath_softc *sc = (struct ath_softc *)data; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| enum ath_reset_type type; |
| unsigned long flags; |
| u32 status = sc->intrstatus; |
| u32 rxmask; |
| |
| ath9k_ps_wakeup(sc); |
| spin_lock(&sc->sc_pcu_lock); |
| |
| if ((status & ATH9K_INT_FATAL) || |
| (status & ATH9K_INT_BB_WATCHDOG)) { |
| |
| if (status & ATH9K_INT_FATAL) |
| type = RESET_TYPE_FATAL_INT; |
| else |
| type = RESET_TYPE_BB_WATCHDOG; |
| |
| ath9k_queue_reset(sc, type); |
| goto out; |
| } |
| |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) { |
| /* |
| * TSF sync does not look correct; remain awake to sync with |
| * the next Beacon. |
| */ |
| ath_dbg(common, PS, "TSFOOR - Sync with next Beacon\n"); |
| sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC; |
| } |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) |
| rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL | |
| ATH9K_INT_RXORN); |
| else |
| rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN); |
| |
| if (status & rxmask) { |
| /* Check for high priority Rx first */ |
| if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) && |
| (status & ATH9K_INT_RXHP)) |
| ath_rx_tasklet(sc, 0, true); |
| |
| ath_rx_tasklet(sc, 0, false); |
| } |
| |
| if (status & ATH9K_INT_TX) { |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) |
| ath_tx_edma_tasklet(sc); |
| else |
| ath_tx_tasklet(sc); |
| } |
| |
| ath9k_btcoex_handle_interrupt(sc, status); |
| |
| out: |
| /* re-enable hardware interrupt */ |
| ath9k_hw_enable_interrupts(ah); |
| |
| spin_unlock(&sc->sc_pcu_lock); |
| ath9k_ps_restore(sc); |
| } |
| |
| irqreturn_t ath_isr(int irq, void *dev) |
| { |
| #define SCHED_INTR ( \ |
| ATH9K_INT_FATAL | \ |
| ATH9K_INT_BB_WATCHDOG | \ |
| ATH9K_INT_RXORN | \ |
| ATH9K_INT_RXEOL | \ |
| ATH9K_INT_RX | \ |
| ATH9K_INT_RXLP | \ |
| ATH9K_INT_RXHP | \ |
| ATH9K_INT_TX | \ |
| ATH9K_INT_BMISS | \ |
| ATH9K_INT_CST | \ |
| ATH9K_INT_TSFOOR | \ |
| ATH9K_INT_GENTIMER | \ |
| ATH9K_INT_MCI) |
| |
| struct ath_softc *sc = dev; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| enum ath9k_int status; |
| bool sched = false; |
| |
| /* |
| * The hardware is not ready/present, don't |
| * touch anything. Note this can happen early |
| * on if the IRQ is shared. |
| */ |
| if (test_bit(SC_OP_INVALID, &sc->sc_flags)) |
| return IRQ_NONE; |
| |
| /* shared irq, not for us */ |
| |
| if (!ath9k_hw_intrpend(ah)) |
| return IRQ_NONE; |
| |
| if (test_bit(SC_OP_HW_RESET, &sc->sc_flags)) { |
| ath9k_hw_kill_interrupts(ah); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Figure out the reason(s) for the interrupt. Note |
| * that the hal returns a pseudo-ISR that may include |
| * bits we haven't explicitly enabled so we mask the |
| * value to insure we only process bits we requested. |
| */ |
| ath9k_hw_getisr(ah, &status); /* NB: clears ISR too */ |
| status &= ah->imask; /* discard unasked-for bits */ |
| |
| /* |
| * If there are no status bits set, then this interrupt was not |
| * for me (should have been caught above). |
| */ |
| if (!status) |
| return IRQ_NONE; |
| |
| /* Cache the status */ |
| sc->intrstatus = status; |
| |
| if (status & SCHED_INTR) |
| sched = true; |
| |
| /* |
| * If a FATAL or RXORN interrupt is received, we have to reset the |
| * chip immediately. |
| */ |
| if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) && |
| !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))) |
| goto chip_reset; |
| |
| if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) && |
| (status & ATH9K_INT_BB_WATCHDOG)) { |
| |
| spin_lock(&common->cc_lock); |
| ath_hw_cycle_counters_update(common); |
| ar9003_hw_bb_watchdog_dbg_info(ah); |
| spin_unlock(&common->cc_lock); |
| |
| goto chip_reset; |
| } |
| #ifdef CONFIG_PM_SLEEP |
| if (status & ATH9K_INT_BMISS) { |
| if (atomic_read(&sc->wow_sleep_proc_intr) == 0) { |
| ath_dbg(common, ANY, "during WoW we got a BMISS\n"); |
| atomic_inc(&sc->wow_got_bmiss_intr); |
| atomic_dec(&sc->wow_sleep_proc_intr); |
| } |
| } |
| #endif |
| if (status & ATH9K_INT_SWBA) |
| tasklet_schedule(&sc->bcon_tasklet); |
| |
| if (status & ATH9K_INT_TXURN) |
| ath9k_hw_updatetxtriglevel(ah, true); |
| |
| if (status & ATH9K_INT_RXEOL) { |
| ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN); |
| ath9k_hw_set_interrupts(ah); |
| } |
| |
| if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) |
| if (status & ATH9K_INT_TIM_TIMER) { |
| if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle)) |
| goto chip_reset; |
| /* Clear RxAbort bit so that we can |
| * receive frames */ |
| ath9k_setpower(sc, ATH9K_PM_AWAKE); |
| spin_lock(&sc->sc_pm_lock); |
| ath9k_hw_setrxabort(sc->sc_ah, 0); |
| sc->ps_flags |= PS_WAIT_FOR_BEACON; |
| spin_unlock(&sc->sc_pm_lock); |
| } |
| |
| chip_reset: |
| |
| ath_debug_stat_interrupt(sc, status); |
| |
| if (sched) { |
| /* turn off every interrupt */ |
| ath9k_hw_disable_interrupts(ah); |
| tasklet_schedule(&sc->intr_tq); |
| } |
| |
| return IRQ_HANDLED; |
| |
| #undef SCHED_INTR |
| } |
| |
| static int ath_reset(struct ath_softc *sc) |
| { |
| int i, r; |
| |
| ath9k_ps_wakeup(sc); |
| |
| r = ath_reset_internal(sc, NULL); |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (!ATH_TXQ_SETUP(sc, i)) |
| continue; |
| |
| spin_lock_bh(&sc->tx.txq[i].axq_lock); |
| ath_txq_schedule(sc, &sc->tx.txq[i]); |
| spin_unlock_bh(&sc->tx.txq[i].axq_lock); |
| } |
| |
| ath9k_ps_restore(sc); |
| |
| return r; |
| } |
| |
| void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type) |
| { |
| #ifdef CONFIG_ATH9K_DEBUGFS |
| RESET_STAT_INC(sc, type); |
| #endif |
| set_bit(SC_OP_HW_RESET, &sc->sc_flags); |
| ieee80211_queue_work(sc->hw, &sc->hw_reset_work); |
| } |
| |
| void ath_reset_work(struct work_struct *work) |
| { |
| struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work); |
| |
| ath_reset(sc); |
| } |
| |
| /**********************/ |
| /* mac80211 callbacks */ |
| /**********************/ |
| |
| static int ath9k_start(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ieee80211_channel *curchan = hw->conf.chandef.chan; |
| struct ath9k_channel *init_channel; |
| int r; |
| |
| ath_dbg(common, CONFIG, |
| "Starting driver with initial channel: %d MHz\n", |
| curchan->center_freq); |
| |
| ath9k_ps_wakeup(sc); |
| mutex_lock(&sc->mutex); |
| |
| init_channel = ath9k_cmn_get_curchannel(hw, ah); |
| |
| /* Reset SERDES registers */ |
| ath9k_hw_configpcipowersave(ah, false); |
| |
| /* |
| * The basic interface to setting the hardware in a good |
| * state is ``reset''. On return the hardware is known to |
| * be powered up and with interrupts disabled. This must |
| * be followed by initialization of the appropriate bits |
| * and then setup of the interrupt mask. |
| */ |
| spin_lock_bh(&sc->sc_pcu_lock); |
| |
| atomic_set(&ah->intr_ref_cnt, -1); |
| |
| r = ath9k_hw_reset(ah, init_channel, ah->caldata, false); |
| if (r) { |
| ath_err(common, |
| "Unable to reset hardware; reset status %d (freq %u MHz)\n", |
| r, curchan->center_freq); |
| ah->reset_power_on = false; |
| } |
| |
| /* Setup our intr mask. */ |
| ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL | |
| ATH9K_INT_RXORN | ATH9K_INT_FATAL | |
| ATH9K_INT_GLOBAL; |
| |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) |
| ah->imask |= ATH9K_INT_RXHP | |
| ATH9K_INT_RXLP | |
| ATH9K_INT_BB_WATCHDOG; |
| else |
| ah->imask |= ATH9K_INT_RX; |
| |
| ah->imask |= ATH9K_INT_GTT; |
| |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) |
| ah->imask |= ATH9K_INT_CST; |
| |
| ath_mci_enable(sc); |
| |
| clear_bit(SC_OP_INVALID, &sc->sc_flags); |
| sc->sc_ah->is_monitoring = false; |
| |
| if (!ath_complete_reset(sc, false)) |
| ah->reset_power_on = false; |
| |
| if (ah->led_pin >= 0) { |
| ath9k_hw_cfg_output(ah, ah->led_pin, |
| AR_GPIO_OUTPUT_MUX_AS_OUTPUT); |
| ath9k_hw_set_gpio(ah, ah->led_pin, 0); |
| } |
| |
| /* |
| * Reset key cache to sane defaults (all entries cleared) instead of |
| * semi-random values after suspend/resume. |
| */ |
| ath9k_cmn_init_crypto(sc->sc_ah); |
| |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| mutex_unlock(&sc->mutex); |
| |
| ath9k_ps_restore(sc); |
| |
| return 0; |
| } |
| |
| static void ath9k_tx(struct ieee80211_hw *hw, |
| struct ieee80211_tx_control *control, |
| struct sk_buff *skb) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_tx_control txctl; |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| unsigned long flags; |
| |
| if (sc->ps_enabled) { |
| /* |
| * mac80211 does not set PM field for normal data frames, so we |
| * need to update that based on the current PS mode. |
| */ |
| if (ieee80211_is_data(hdr->frame_control) && |
| !ieee80211_is_nullfunc(hdr->frame_control) && |
| !ieee80211_has_pm(hdr->frame_control)) { |
| ath_dbg(common, PS, |
| "Add PM=1 for a TX frame while in PS mode\n"); |
| hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); |
| } |
| } |
| |
| if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_NETWORK_SLEEP)) { |
| /* |
| * We are using PS-Poll and mac80211 can request TX while in |
| * power save mode. Need to wake up hardware for the TX to be |
| * completed and if needed, also for RX of buffered frames. |
| */ |
| ath9k_ps_wakeup(sc); |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) |
| ath9k_hw_setrxabort(sc->sc_ah, 0); |
| if (ieee80211_is_pspoll(hdr->frame_control)) { |
| ath_dbg(common, PS, |
| "Sending PS-Poll to pick a buffered frame\n"); |
| sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA; |
| } else { |
| ath_dbg(common, PS, "Wake up to complete TX\n"); |
| sc->ps_flags |= PS_WAIT_FOR_TX_ACK; |
| } |
| /* |
| * The actual restore operation will happen only after |
| * the ps_flags bit is cleared. We are just dropping |
| * the ps_usecount here. |
| */ |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| ath9k_ps_restore(sc); |
| } |
| |
| /* |
| * Cannot tx while the hardware is in full sleep, it first needs a full |
| * chip reset to recover from that |
| */ |
| if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP)) { |
| ath_err(common, "TX while HW is in FULL_SLEEP mode\n"); |
| goto exit; |
| } |
| |
| memset(&txctl, 0, sizeof(struct ath_tx_control)); |
| txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)]; |
| txctl.sta = control->sta; |
| |
| ath_dbg(common, XMIT, "transmitting packet, skb: %p\n", skb); |
| |
| if (ath_tx_start(hw, skb, &txctl) != 0) { |
| ath_dbg(common, XMIT, "TX failed\n"); |
| TX_STAT_INC(txctl.txq->axq_qnum, txfailed); |
| goto exit; |
| } |
| |
| return; |
| exit: |
| ieee80211_free_txskb(hw, skb); |
| } |
| |
| static void ath9k_stop(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| bool prev_idle; |
| |
| mutex_lock(&sc->mutex); |
| |
| ath_cancel_work(sc); |
| del_timer_sync(&sc->rx_poll_timer); |
| |
| if (test_bit(SC_OP_INVALID, &sc->sc_flags)) { |
| ath_dbg(common, ANY, "Device not present\n"); |
| mutex_unlock(&sc->mutex); |
| return; |
| } |
| |
| /* Ensure HW is awake when we try to shut it down. */ |
| ath9k_ps_wakeup(sc); |
| |
| spin_lock_bh(&sc->sc_pcu_lock); |
| |
| /* prevent tasklets to enable interrupts once we disable them */ |
| ah->imask &= ~ATH9K_INT_GLOBAL; |
| |
| /* make sure h/w will not generate any interrupt |
| * before setting the invalid flag. */ |
| ath9k_hw_disable_interrupts(ah); |
| |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| /* we can now sync irq and kill any running tasklets, since we already |
| * disabled interrupts and not holding a spin lock */ |
| synchronize_irq(sc->irq); |
| tasklet_kill(&sc->intr_tq); |
| tasklet_kill(&sc->bcon_tasklet); |
| |
| prev_idle = sc->ps_idle; |
| sc->ps_idle = true; |
| |
| spin_lock_bh(&sc->sc_pcu_lock); |
| |
| if (ah->led_pin >= 0) { |
| ath9k_hw_set_gpio(ah, ah->led_pin, 1); |
| ath9k_hw_cfg_gpio_input(ah, ah->led_pin); |
| } |
| |
| ath_prepare_reset(sc); |
| |
| if (sc->rx.frag) { |
| dev_kfree_skb_any(sc->rx.frag); |
| sc->rx.frag = NULL; |
| } |
| |
| if (!ah->curchan) |
| ah->curchan = ath9k_cmn_get_curchannel(hw, ah); |
| |
| ath9k_hw_reset(ah, ah->curchan, ah->caldata, false); |
| ath9k_hw_phy_disable(ah); |
| |
| ath9k_hw_configpcipowersave(ah, true); |
| |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| ath9k_ps_restore(sc); |
| |
| set_bit(SC_OP_INVALID, &sc->sc_flags); |
| sc->ps_idle = prev_idle; |
| |
| mutex_unlock(&sc->mutex); |
| |
| ath_dbg(common, CONFIG, "Driver halt\n"); |
| } |
| |
| bool ath9k_uses_beacons(int type) |
| { |
| switch (type) { |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_ADHOC: |
| case NL80211_IFTYPE_MESH_POINT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static void ath9k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| { |
| struct ath9k_vif_iter_data *iter_data = data; |
| int i; |
| |
| if (iter_data->has_hw_macaddr) { |
| for (i = 0; i < ETH_ALEN; i++) |
| iter_data->mask[i] &= |
| ~(iter_data->hw_macaddr[i] ^ mac[i]); |
| } else { |
| memcpy(iter_data->hw_macaddr, mac, ETH_ALEN); |
| iter_data->has_hw_macaddr = true; |
| } |
| |
| switch (vif->type) { |
| case NL80211_IFTYPE_AP: |
| iter_data->naps++; |
| break; |
| case NL80211_IFTYPE_STATION: |
| iter_data->nstations++; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| iter_data->nadhocs++; |
| break; |
| case NL80211_IFTYPE_MESH_POINT: |
| iter_data->nmeshes++; |
| break; |
| case NL80211_IFTYPE_WDS: |
| iter_data->nwds++; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void ath9k_sta_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = data; |
| struct ath_vif *avp = (void *)vif->drv_priv; |
| |
| if (vif->type != NL80211_IFTYPE_STATION) |
| return; |
| |
| if (avp->primary_sta_vif) |
| ath9k_set_assoc_state(sc, vif); |
| } |
| |
| /* Called with sc->mutex held. */ |
| void ath9k_calculate_iter_data(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ath9k_vif_iter_data *iter_data) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| /* |
| * Use the hardware MAC address as reference, the hardware uses it |
| * together with the BSSID mask when matching addresses. |
| */ |
| memset(iter_data, 0, sizeof(*iter_data)); |
| memset(&iter_data->mask, 0xff, ETH_ALEN); |
| |
| if (vif) |
| ath9k_vif_iter(iter_data, vif->addr, vif); |
| |
| /* Get list of all active MAC addresses */ |
| ieee80211_iterate_active_interfaces_atomic( |
| sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| ath9k_vif_iter, iter_data); |
| |
| memcpy(common->macaddr, iter_data->hw_macaddr, ETH_ALEN); |
| } |
| |
| /* Called with sc->mutex held. */ |
| static void ath9k_calculate_summary_state(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath9k_vif_iter_data iter_data; |
| enum nl80211_iftype old_opmode = ah->opmode; |
| |
| ath9k_calculate_iter_data(hw, vif, &iter_data); |
| |
| memcpy(common->bssidmask, iter_data.mask, ETH_ALEN); |
| ath_hw_setbssidmask(common); |
| |
| if (iter_data.naps > 0) { |
| ath9k_hw_set_tsfadjust(ah, true); |
| ah->opmode = NL80211_IFTYPE_AP; |
| } else { |
| ath9k_hw_set_tsfadjust(ah, false); |
| |
| if (iter_data.nmeshes) |
| ah->opmode = NL80211_IFTYPE_MESH_POINT; |
| else if (iter_data.nwds) |
| ah->opmode = NL80211_IFTYPE_AP; |
| else if (iter_data.nadhocs) |
| ah->opmode = NL80211_IFTYPE_ADHOC; |
| else |
| ah->opmode = NL80211_IFTYPE_STATION; |
| } |
| |
| ath9k_hw_setopmode(ah); |
| |
| if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) |
| ah->imask |= ATH9K_INT_TSFOOR; |
| else |
| ah->imask &= ~ATH9K_INT_TSFOOR; |
| |
| ath9k_hw_set_interrupts(ah); |
| |
| /* |
| * If we are changing the opmode to STATION, |
| * a beacon sync needs to be done. |
| */ |
| if (ah->opmode == NL80211_IFTYPE_STATION && |
| old_opmode == NL80211_IFTYPE_AP && |
| test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { |
| ieee80211_iterate_active_interfaces_atomic( |
| sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| ath9k_sta_vif_iter, sc); |
| } |
| } |
| |
| static int ath9k_add_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| mutex_lock(&sc->mutex); |
| |
| ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type); |
| sc->nvifs++; |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_calculate_summary_state(hw, vif); |
| ath9k_ps_restore(sc); |
| |
| if (ath9k_uses_beacons(vif->type)) |
| ath9k_beacon_assign_slot(sc, vif); |
| |
| mutex_unlock(&sc->mutex); |
| return 0; |
| } |
| |
| static int ath9k_change_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum nl80211_iftype new_type, |
| bool p2p) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| |
| ath_dbg(common, CONFIG, "Change Interface\n"); |
| mutex_lock(&sc->mutex); |
| |
| if (ath9k_uses_beacons(vif->type)) |
| ath9k_beacon_remove_slot(sc, vif); |
| |
| vif->type = new_type; |
| vif->p2p = p2p; |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_calculate_summary_state(hw, vif); |
| ath9k_ps_restore(sc); |
| |
| if (ath9k_uses_beacons(vif->type)) |
| ath9k_beacon_assign_slot(sc, vif); |
| |
| mutex_unlock(&sc->mutex); |
| return 0; |
| } |
| |
| static void ath9k_remove_interface(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| |
| ath_dbg(common, CONFIG, "Detach Interface\n"); |
| |
| mutex_lock(&sc->mutex); |
| |
| sc->nvifs--; |
| |
| if (ath9k_uses_beacons(vif->type)) |
| ath9k_beacon_remove_slot(sc, vif); |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_calculate_summary_state(hw, NULL); |
| ath9k_ps_restore(sc); |
| |
| mutex_unlock(&sc->mutex); |
| } |
| |
| static void ath9k_enable_ps(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| sc->ps_enabled = true; |
| if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) { |
| if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) { |
| ah->imask |= ATH9K_INT_TIM_TIMER; |
| ath9k_hw_set_interrupts(ah); |
| } |
| ath9k_hw_setrxabort(ah, 1); |
| } |
| ath_dbg(common, PS, "PowerSave enabled\n"); |
| } |
| |
| static void ath9k_disable_ps(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| sc->ps_enabled = false; |
| ath9k_hw_setpower(ah, ATH9K_PM_AWAKE); |
| if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) { |
| ath9k_hw_setrxabort(ah, 0); |
| sc->ps_flags &= ~(PS_WAIT_FOR_BEACON | |
| PS_WAIT_FOR_CAB | |
| PS_WAIT_FOR_PSPOLL_DATA | |
| PS_WAIT_FOR_TX_ACK); |
| if (ah->imask & ATH9K_INT_TIM_TIMER) { |
| ah->imask &= ~ATH9K_INT_TIM_TIMER; |
| ath9k_hw_set_interrupts(ah); |
| } |
| } |
| ath_dbg(common, PS, "PowerSave disabled\n"); |
| } |
| |
| void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| u32 rxfilter; |
| |
| if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { |
| ath_err(common, "spectrum analyzer not implemented on this hardware\n"); |
| return; |
| } |
| |
| ath9k_ps_wakeup(sc); |
| rxfilter = ath9k_hw_getrxfilter(ah); |
| ath9k_hw_setrxfilter(ah, rxfilter | |
| ATH9K_RX_FILTER_PHYRADAR | |
| ATH9K_RX_FILTER_PHYERR); |
| |
| /* TODO: usually this should not be neccesary, but for some reason |
| * (or in some mode?) the trigger must be called after the |
| * configuration, otherwise the register will have its values reset |
| * (on my ar9220 to value 0x01002310) |
| */ |
| ath9k_spectral_scan_config(hw, sc->spectral_mode); |
| ath9k_hw_ops(ah)->spectral_scan_trigger(ah); |
| ath9k_ps_restore(sc); |
| } |
| |
| int ath9k_spectral_scan_config(struct ieee80211_hw *hw, |
| enum spectral_mode spectral_mode) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { |
| ath_err(common, "spectrum analyzer not implemented on this hardware\n"); |
| return -1; |
| } |
| |
| switch (spectral_mode) { |
| case SPECTRAL_DISABLED: |
| sc->spec_config.enabled = 0; |
| break; |
| case SPECTRAL_BACKGROUND: |
| /* send endless samples. |
| * TODO: is this really useful for "background"? |
| */ |
| sc->spec_config.endless = 1; |
| sc->spec_config.enabled = 1; |
| break; |
| case SPECTRAL_CHANSCAN: |
| case SPECTRAL_MANUAL: |
| sc->spec_config.endless = 0; |
| sc->spec_config.enabled = 1; |
| break; |
| default: |
| return -1; |
| } |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_hw_ops(ah)->spectral_scan_config(ah, &sc->spec_config); |
| ath9k_ps_restore(sc); |
| |
| sc->spectral_mode = spectral_mode; |
| |
| return 0; |
| } |
| |
| static int ath9k_config(struct ieee80211_hw *hw, u32 changed) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ieee80211_conf *conf = &hw->conf; |
| bool reset_channel = false; |
| |
| ath9k_ps_wakeup(sc); |
| mutex_lock(&sc->mutex); |
| |
| if (changed & IEEE80211_CONF_CHANGE_IDLE) { |
| sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE); |
| if (sc->ps_idle) { |
| ath_cancel_work(sc); |
| ath9k_stop_btcoex(sc); |
| } else { |
| ath9k_start_btcoex(sc); |
| /* |
| * The chip needs a reset to properly wake up from |
| * full sleep |
| */ |
| reset_channel = ah->chip_fullsleep; |
| } |
| } |
| |
| /* |
| * We just prepare to enable PS. We have to wait until our AP has |
| * ACK'd our null data frame to disable RX otherwise we'll ignore |
| * those ACKs and end up retransmitting the same null data frames. |
| * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode. |
| */ |
| if (changed & IEEE80211_CONF_CHANGE_PS) { |
| unsigned long flags; |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| if (conf->flags & IEEE80211_CONF_PS) |
| ath9k_enable_ps(sc); |
| else |
| ath9k_disable_ps(sc); |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_MONITOR) { |
| if (conf->flags & IEEE80211_CONF_MONITOR) { |
| ath_dbg(common, CONFIG, "Monitor mode is enabled\n"); |
| sc->sc_ah->is_monitoring = true; |
| } else { |
| ath_dbg(common, CONFIG, "Monitor mode is disabled\n"); |
| sc->sc_ah->is_monitoring = false; |
| } |
| } |
| |
| if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { |
| struct ieee80211_channel *curchan = hw->conf.chandef.chan; |
| enum nl80211_channel_type channel_type = |
| cfg80211_get_chandef_type(&conf->chandef); |
| int pos = curchan->hw_value; |
| int old_pos = -1; |
| unsigned long flags; |
| |
| if (ah->curchan) |
| old_pos = ah->curchan - &ah->channels[0]; |
| |
| ath_dbg(common, CONFIG, "Set channel: %d MHz type: %d\n", |
| curchan->center_freq, channel_type); |
| |
| /* update survey stats for the old channel before switching */ |
| spin_lock_irqsave(&common->cc_lock, flags); |
| ath_update_survey_stats(sc); |
| spin_unlock_irqrestore(&common->cc_lock, flags); |
| |
| /* |
| * Preserve the current channel values, before updating |
| * the same channel |
| */ |
| if (ah->curchan && (old_pos == pos)) |
| ath9k_hw_getnf(ah, ah->curchan); |
| |
| ath9k_cmn_update_ichannel(&sc->sc_ah->channels[pos], |
| curchan, channel_type); |
| |
| /* |
| * If the operating channel changes, change the survey in-use flags |
| * along with it. |
| * Reset the survey data for the new channel, unless we're switching |
| * back to the operating channel from an off-channel operation. |
| */ |
| if (!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL) && |
| sc->cur_survey != &sc->survey[pos]) { |
| |
| if (sc->cur_survey) |
| sc->cur_survey->filled &= ~SURVEY_INFO_IN_USE; |
| |
| sc->cur_survey = &sc->survey[pos]; |
| |
| memset(sc->cur_survey, 0, sizeof(struct survey_info)); |
| sc->cur_survey->filled |= SURVEY_INFO_IN_USE; |
| } else if (!(sc->survey[pos].filled & SURVEY_INFO_IN_USE)) { |
| memset(&sc->survey[pos], 0, sizeof(struct survey_info)); |
| } |
| |
| if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) { |
| ath_err(common, "Unable to set channel\n"); |
| mutex_unlock(&sc->mutex); |
| ath9k_ps_restore(sc); |
| return -EINVAL; |
| } |
| |
| /* |
| * The most recent snapshot of channel->noisefloor for the old |
| * channel is only available after the hardware reset. Copy it to |
| * the survey stats now. |
| */ |
| if (old_pos >= 0) |
| ath_update_survey_nf(sc, old_pos); |
| |
| /* |
| * Enable radar pulse detection if on a DFS channel. Spectral |
| * scanning and radar detection can not be used concurrently. |
| */ |
| if (hw->conf.radar_enabled) { |
| u32 rxfilter; |
| |
| /* set HW specific DFS configuration */ |
| ath9k_hw_set_radar_params(ah); |
| rxfilter = ath9k_hw_getrxfilter(ah); |
| rxfilter |= ATH9K_RX_FILTER_PHYRADAR | |
| ATH9K_RX_FILTER_PHYERR; |
| ath9k_hw_setrxfilter(ah, rxfilter); |
| ath_dbg(common, DFS, "DFS enabled at freq %d\n", |
| curchan->center_freq); |
| } else { |
| /* perform spectral scan if requested. */ |
| if (sc->scanning && |
| sc->spectral_mode == SPECTRAL_CHANSCAN) |
| ath9k_spectral_scan_trigger(hw); |
| } |
| } |
| |
| if (changed & IEEE80211_CONF_CHANGE_POWER) { |
| ath_dbg(common, CONFIG, "Set power: %d\n", conf->power_level); |
| sc->config.txpowlimit = 2 * conf->power_level; |
| ath9k_cmn_update_txpow(ah, sc->curtxpow, |
| sc->config.txpowlimit, &sc->curtxpow); |
| } |
| |
| mutex_unlock(&sc->mutex); |
| ath9k_ps_restore(sc); |
| |
| return 0; |
| } |
| |
| #define SUPPORTED_FILTERS \ |
| (FIF_PROMISC_IN_BSS | \ |
| FIF_ALLMULTI | \ |
| FIF_CONTROL | \ |
| FIF_PSPOLL | \ |
| FIF_OTHER_BSS | \ |
| FIF_BCN_PRBRESP_PROMISC | \ |
| FIF_PROBE_REQ | \ |
| FIF_FCSFAIL) |
| |
| /* FIXME: sc->sc_full_reset ? */ |
| static void ath9k_configure_filter(struct ieee80211_hw *hw, |
| unsigned int changed_flags, |
| unsigned int *total_flags, |
| u64 multicast) |
| { |
| struct ath_softc *sc = hw->priv; |
| u32 rfilt; |
| |
| changed_flags &= SUPPORTED_FILTERS; |
| *total_flags &= SUPPORTED_FILTERS; |
| |
| sc->rx.rxfilter = *total_flags; |
| ath9k_ps_wakeup(sc); |
| rfilt = ath_calcrxfilter(sc); |
| ath9k_hw_setrxfilter(sc->sc_ah, rfilt); |
| ath9k_ps_restore(sc); |
| |
| ath_dbg(ath9k_hw_common(sc->sc_ah), CONFIG, "Set HW RX filter: 0x%x\n", |
| rfilt); |
| } |
| |
| static int ath9k_sta_add(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_node *an = (struct ath_node *) sta->drv_priv; |
| struct ieee80211_key_conf ps_key = { }; |
| int key; |
| |
| ath_node_attach(sc, sta, vif); |
| |
| if (vif->type != NL80211_IFTYPE_AP && |
| vif->type != NL80211_IFTYPE_AP_VLAN) |
| return 0; |
| |
| key = ath_key_config(common, vif, sta, &ps_key); |
| if (key > 0) |
| an->ps_key = key; |
| |
| return 0; |
| } |
| |
| static void ath9k_del_ps_key(struct ath_softc *sc, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_node *an = (struct ath_node *) sta->drv_priv; |
| struct ieee80211_key_conf ps_key = { .hw_key_idx = an->ps_key }; |
| |
| if (!an->ps_key) |
| return; |
| |
| ath_key_delete(common, &ps_key); |
| an->ps_key = 0; |
| } |
| |
| static int ath9k_sta_remove(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| ath9k_del_ps_key(sc, vif, sta); |
| ath_node_detach(sc, sta); |
| |
| return 0; |
| } |
| |
| static void ath9k_sta_notify(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum sta_notify_cmd cmd, |
| struct ieee80211_sta *sta) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_node *an = (struct ath_node *) sta->drv_priv; |
| |
| if (!sta->ht_cap.ht_supported) |
| return; |
| |
| switch (cmd) { |
| case STA_NOTIFY_SLEEP: |
| an->sleeping = true; |
| ath_tx_aggr_sleep(sta, sc, an); |
| break; |
| case STA_NOTIFY_AWAKE: |
| an->sleeping = false; |
| ath_tx_aggr_wakeup(sc, an); |
| break; |
| } |
| } |
| |
| static int ath9k_conf_tx(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, u16 queue, |
| const struct ieee80211_tx_queue_params *params) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_txq *txq; |
| struct ath9k_tx_queue_info qi; |
| int ret = 0; |
| |
| if (queue >= IEEE80211_NUM_ACS) |
| return 0; |
| |
| txq = sc->tx.txq_map[queue]; |
| |
| ath9k_ps_wakeup(sc); |
| mutex_lock(&sc->mutex); |
| |
| memset(&qi, 0, sizeof(struct ath9k_tx_queue_info)); |
| |
| qi.tqi_aifs = params->aifs; |
| qi.tqi_cwmin = params->cw_min; |
| qi.tqi_cwmax = params->cw_max; |
| qi.tqi_burstTime = params->txop * 32; |
| |
| ath_dbg(common, CONFIG, |
| "Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", |
| queue, txq->axq_qnum, params->aifs, params->cw_min, |
| params->cw_max, params->txop); |
| |
| ath_update_max_aggr_framelen(sc, queue, qi.tqi_burstTime); |
| ret = ath_txq_update(sc, txq->axq_qnum, &qi); |
| if (ret) |
| ath_err(common, "TXQ Update failed\n"); |
| |
| mutex_unlock(&sc->mutex); |
| ath9k_ps_restore(sc); |
| |
| return ret; |
| } |
| |
| static int ath9k_set_key(struct ieee80211_hw *hw, |
| enum set_key_cmd cmd, |
| struct ieee80211_vif *vif, |
| struct ieee80211_sta *sta, |
| struct ieee80211_key_conf *key) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| int ret = 0; |
| |
| if (ath9k_modparam_nohwcrypt) |
| return -ENOSPC; |
| |
| if ((vif->type == NL80211_IFTYPE_ADHOC || |
| vif->type == NL80211_IFTYPE_MESH_POINT) && |
| (key->cipher == WLAN_CIPHER_SUITE_TKIP || |
| key->cipher == WLAN_CIPHER_SUITE_CCMP) && |
| !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) { |
| /* |
| * For now, disable hw crypto for the RSN IBSS group keys. This |
| * could be optimized in the future to use a modified key cache |
| * design to support per-STA RX GTK, but until that gets |
| * implemented, use of software crypto for group addressed |
| * frames is a acceptable to allow RSN IBSS to be used. |
| */ |
| return -EOPNOTSUPP; |
| } |
| |
| mutex_lock(&sc->mutex); |
| ath9k_ps_wakeup(sc); |
| ath_dbg(common, CONFIG, "Set HW Key\n"); |
| |
| switch (cmd) { |
| case SET_KEY: |
| if (sta) |
| ath9k_del_ps_key(sc, vif, sta); |
| |
| ret = ath_key_config(common, vif, sta, key); |
| if (ret >= 0) { |
| key->hw_key_idx = ret; |
| /* push IV and Michael MIC generation to stack */ |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; |
| if (key->cipher == WLAN_CIPHER_SUITE_TKIP) |
| key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; |
| if (sc->sc_ah->sw_mgmt_crypto && |
| key->cipher == WLAN_CIPHER_SUITE_CCMP) |
| key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; |
| ret = 0; |
| } |
| break; |
| case DISABLE_KEY: |
| ath_key_delete(common, key); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| ath9k_ps_restore(sc); |
| mutex_unlock(&sc->mutex); |
| |
| return ret; |
| } |
| |
| static void ath9k_set_assoc_state(struct ath_softc *sc, |
| struct ieee80211_vif *vif) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_vif *avp = (void *)vif->drv_priv; |
| struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; |
| unsigned long flags; |
| |
| set_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags); |
| avp->primary_sta_vif = true; |
| |
| /* |
| * Set the AID, BSSID and do beacon-sync only when |
| * the HW opmode is STATION. |
| * |
| * But the primary bit is set above in any case. |
| */ |
| if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION) |
| return; |
| |
| memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); |
| common->curaid = bss_conf->aid; |
| ath9k_hw_write_associd(sc->sc_ah); |
| |
| sc->last_rssi = ATH_RSSI_DUMMY_MARKER; |
| sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER; |
| |
| spin_lock_irqsave(&sc->sc_pm_lock, flags); |
| sc->ps_flags |= PS_BEACON_SYNC | PS_WAIT_FOR_BEACON; |
| spin_unlock_irqrestore(&sc->sc_pm_lock, flags); |
| |
| if (ath9k_hw_mci_is_enabled(sc->sc_ah)) |
| ath9k_mci_update_wlan_channels(sc, false); |
| |
| ath_dbg(common, CONFIG, |
| "Primary Station interface: %pM, BSSID: %pM\n", |
| vif->addr, common->curbssid); |
| } |
| |
| static void ath9k_bss_assoc_iter(void *data, u8 *mac, struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = data; |
| struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; |
| |
| if (test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) |
| return; |
| |
| if (bss_conf->assoc) |
| ath9k_set_assoc_state(sc, vif); |
| } |
| |
| static void ath9k_bss_info_changed(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_bss_conf *bss_conf, |
| u32 changed) |
| { |
| #define CHECK_ANI \ |
| (BSS_CHANGED_ASSOC | \ |
| BSS_CHANGED_IBSS | \ |
| BSS_CHANGED_BEACON_ENABLED) |
| |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_vif *avp = (void *)vif->drv_priv; |
| int slottime; |
| |
| ath9k_ps_wakeup(sc); |
| mutex_lock(&sc->mutex); |
| |
| if (changed & BSS_CHANGED_ASSOC) { |
| ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n", |
| bss_conf->bssid, bss_conf->assoc); |
| |
| if (avp->primary_sta_vif && !bss_conf->assoc) { |
| clear_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags); |
| avp->primary_sta_vif = false; |
| |
| if (ah->opmode == NL80211_IFTYPE_STATION) |
| clear_bit(SC_OP_BEACONS, &sc->sc_flags); |
| } |
| |
| ieee80211_iterate_active_interfaces_atomic( |
| sc->hw, IEEE80211_IFACE_ITER_RESUME_ALL, |
| ath9k_bss_assoc_iter, sc); |
| |
| if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags) && |
| ah->opmode == NL80211_IFTYPE_STATION) { |
| memset(common->curbssid, 0, ETH_ALEN); |
| common->curaid = 0; |
| ath9k_hw_write_associd(sc->sc_ah); |
| if (ath9k_hw_mci_is_enabled(sc->sc_ah)) |
| ath9k_mci_update_wlan_channels(sc, true); |
| } |
| } |
| |
| if (changed & BSS_CHANGED_IBSS) { |
| memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN); |
| common->curaid = bss_conf->aid; |
| ath9k_hw_write_associd(sc->sc_ah); |
| } |
| |
| if ((changed & BSS_CHANGED_BEACON_ENABLED) || |
| (changed & BSS_CHANGED_BEACON_INT)) { |
| if (ah->opmode == NL80211_IFTYPE_AP && |
| bss_conf->enable_beacon) |
| ath9k_set_tsfadjust(sc, vif); |
| if (ath9k_allow_beacon_config(sc, vif)) |
| ath9k_beacon_config(sc, vif, changed); |
| } |
| |
| if (changed & BSS_CHANGED_ERP_SLOT) { |
| if (bss_conf->use_short_slot) |
| slottime = 9; |
| else |
| slottime = 20; |
| if (vif->type == NL80211_IFTYPE_AP) { |
| /* |
| * Defer update, so that connected stations can adjust |
| * their settings at the same time. |
| * See beacon.c for more details |
| */ |
| sc->beacon.slottime = slottime; |
| sc->beacon.updateslot = UPDATE; |
| } else { |
| ah->slottime = slottime; |
| ath9k_hw_init_global_settings(ah); |
| } |
| } |
| |
| if (changed & CHECK_ANI) |
| ath_check_ani(sc); |
| |
| mutex_unlock(&sc->mutex); |
| ath9k_ps_restore(sc); |
| |
| #undef CHECK_ANI |
| } |
| |
| static u64 ath9k_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = hw->priv; |
| u64 tsf; |
| |
| mutex_lock(&sc->mutex); |
| ath9k_ps_wakeup(sc); |
| tsf = ath9k_hw_gettsf64(sc->sc_ah); |
| ath9k_ps_restore(sc); |
| mutex_unlock(&sc->mutex); |
| |
| return tsf; |
| } |
| |
| static void ath9k_set_tsf(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| u64 tsf) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| mutex_lock(&sc->mutex); |
| ath9k_ps_wakeup(sc); |
| ath9k_hw_settsf64(sc->sc_ah, tsf); |
| ath9k_ps_restore(sc); |
| mutex_unlock(&sc->mutex); |
| } |
| |
| static void ath9k_reset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| mutex_lock(&sc->mutex); |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_hw_reset_tsf(sc->sc_ah); |
| ath9k_ps_restore(sc); |
| |
| mutex_unlock(&sc->mutex); |
| } |
| |
| static int ath9k_ampdu_action(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| enum ieee80211_ampdu_mlme_action action, |
| struct ieee80211_sta *sta, |
| u16 tid, u16 *ssn, u8 buf_size) |
| { |
| struct ath_softc *sc = hw->priv; |
| bool flush = false; |
| int ret = 0; |
| |
| local_bh_disable(); |
| |
| switch (action) { |
| case IEEE80211_AMPDU_RX_START: |
| break; |
| case IEEE80211_AMPDU_RX_STOP: |
| break; |
| case IEEE80211_AMPDU_TX_START: |
| ath9k_ps_wakeup(sc); |
| ret = ath_tx_aggr_start(sc, sta, tid, ssn); |
| if (!ret) |
| ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); |
| ath9k_ps_restore(sc); |
| break; |
| case IEEE80211_AMPDU_TX_STOP_FLUSH: |
| case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: |
| flush = true; |
| case IEEE80211_AMPDU_TX_STOP_CONT: |
| ath9k_ps_wakeup(sc); |
| ath_tx_aggr_stop(sc, sta, tid); |
| if (!flush) |
| ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); |
| ath9k_ps_restore(sc); |
| break; |
| case IEEE80211_AMPDU_TX_OPERATIONAL: |
| ath9k_ps_wakeup(sc); |
| ath_tx_aggr_resume(sc, sta, tid); |
| ath9k_ps_restore(sc); |
| break; |
| default: |
| ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n"); |
| } |
| |
| local_bh_enable(); |
| |
| return ret; |
| } |
| |
| static int ath9k_get_survey(struct ieee80211_hw *hw, int idx, |
| struct survey_info *survey) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *chan; |
| unsigned long flags; |
| int pos; |
| |
| spin_lock_irqsave(&common->cc_lock, flags); |
| if (idx == 0) |
| ath_update_survey_stats(sc); |
| |
| sband = hw->wiphy->bands[IEEE80211_BAND_2GHZ]; |
| if (sband && idx >= sband->n_channels) { |
| idx -= sband->n_channels; |
| sband = NULL; |
| } |
| |
| if (!sband) |
| sband = hw->wiphy->bands[IEEE80211_BAND_5GHZ]; |
| |
| if (!sband || idx >= sband->n_channels) { |
| spin_unlock_irqrestore(&common->cc_lock, flags); |
| return -ENOENT; |
| } |
| |
| chan = &sband->channels[idx]; |
| pos = chan->hw_value; |
| memcpy(survey, &sc->survey[pos], sizeof(*survey)); |
| survey->channel = chan; |
| spin_unlock_irqrestore(&common->cc_lock, flags); |
| |
| return 0; |
| } |
| |
| static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| |
| mutex_lock(&sc->mutex); |
| ah->coverage_class = coverage_class; |
| |
| ath9k_ps_wakeup(sc); |
| ath9k_hw_init_global_settings(ah); |
| ath9k_ps_restore(sc); |
| |
| mutex_unlock(&sc->mutex); |
| } |
| |
| static void ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| int timeout = 200; /* ms */ |
| int i, j; |
| bool drain_txq; |
| |
| mutex_lock(&sc->mutex); |
| cancel_delayed_work_sync(&sc->tx_complete_work); |
| |
| if (ah->ah_flags & AH_UNPLUGGED) { |
| ath_dbg(common, ANY, "Device has been unplugged!\n"); |
| mutex_unlock(&sc->mutex); |
| return; |
| } |
| |
| if (test_bit(SC_OP_INVALID, &sc->sc_flags)) { |
| ath_dbg(common, ANY, "Device not present\n"); |
| mutex_unlock(&sc->mutex); |
| return; |
| } |
| |
| for (j = 0; j < timeout; j++) { |
| bool npend = false; |
| |
| if (j) |
| usleep_range(1000, 2000); |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (!ATH_TXQ_SETUP(sc, i)) |
| continue; |
| |
| npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]); |
| |
| if (npend) |
| break; |
| } |
| |
| if (!npend) |
| break; |
| } |
| |
| if (drop) { |
| ath9k_ps_wakeup(sc); |
| spin_lock_bh(&sc->sc_pcu_lock); |
| drain_txq = ath_drain_all_txq(sc); |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| if (!drain_txq) |
| ath_reset(sc); |
| |
| ath9k_ps_restore(sc); |
| ieee80211_wake_queues(hw); |
| } |
| |
| ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0); |
| mutex_unlock(&sc->mutex); |
| } |
| |
| static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| int i; |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { |
| if (!ATH_TXQ_SETUP(sc, i)) |
| continue; |
| |
| if (ath9k_has_pending_frames(sc, &sc->tx.txq[i])) |
| return true; |
| } |
| return false; |
| } |
| |
| static int ath9k_tx_last_beacon(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ieee80211_vif *vif; |
| struct ath_vif *avp; |
| struct ath_buf *bf; |
| struct ath_tx_status ts; |
| bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA); |
| int status; |
| |
| vif = sc->beacon.bslot[0]; |
| if (!vif) |
| return 0; |
| |
| if (!vif->bss_conf.enable_beacon) |
| return 0; |
| |
| avp = (void *)vif->drv_priv; |
| |
| if (!sc->beacon.tx_processed && !edma) { |
| tasklet_disable(&sc->bcon_tasklet); |
| |
| bf = avp->av_bcbuf; |
| if (!bf || !bf->bf_mpdu) |
| goto skip; |
| |
| status = ath9k_hw_txprocdesc(ah, bf->bf_desc, &ts); |
| if (status == -EINPROGRESS) |
| goto skip; |
| |
| sc->beacon.tx_processed = true; |
| sc->beacon.tx_last = !(ts.ts_status & ATH9K_TXERR_MASK); |
| |
| skip: |
| tasklet_enable(&sc->bcon_tasklet); |
| } |
| |
| return sc->beacon.tx_last; |
| } |
| |
| static int ath9k_get_stats(struct ieee80211_hw *hw, |
| struct ieee80211_low_level_stats *stats) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath9k_mib_stats *mib_stats = &ah->ah_mibStats; |
| |
| stats->dot11ACKFailureCount = mib_stats->ackrcv_bad; |
| stats->dot11RTSFailureCount = mib_stats->rts_bad; |
| stats->dot11FCSErrorCount = mib_stats->fcs_bad; |
| stats->dot11RTSSuccessCount = mib_stats->rts_good; |
| return 0; |
| } |
| |
| static u32 fill_chainmask(u32 cap, u32 new) |
| { |
| u32 filled = 0; |
| int i; |
| |
| for (i = 0; cap && new; i++, cap >>= 1) { |
| if (!(cap & BIT(0))) |
| continue; |
| |
| if (new & BIT(0)) |
| filled |= BIT(i); |
| |
| new >>= 1; |
| } |
| |
| return filled; |
| } |
| |
| static bool validate_antenna_mask(struct ath_hw *ah, u32 val) |
| { |
| if (AR_SREV_9300_20_OR_LATER(ah)) |
| return true; |
| |
| switch (val & 0x7) { |
| case 0x1: |
| case 0x3: |
| case 0x7: |
| return true; |
| case 0x2: |
| return (ah->caps.rx_chainmask == 1); |
| default: |
| return false; |
| } |
| } |
| |
| static int ath9k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| |
| if (ah->caps.rx_chainmask != 1) |
| rx_ant |= tx_ant; |
| |
| if (!validate_antenna_mask(ah, rx_ant) || !tx_ant) |
| return -EINVAL; |
| |
| sc->ant_rx = rx_ant; |
| sc->ant_tx = tx_ant; |
| |
| if (ah->caps.rx_chainmask == 1) |
| return 0; |
| |
| /* AR9100 runs into calibration issues if not all rx chains are enabled */ |
| if (AR_SREV_9100(ah)) |
| ah->rxchainmask = 0x7; |
| else |
| ah->rxchainmask = fill_chainmask(ah->caps.rx_chainmask, rx_ant); |
| |
| ah->txchainmask = fill_chainmask(ah->caps.tx_chainmask, tx_ant); |
| ath9k_reload_chainmask_settings(sc); |
| |
| return 0; |
| } |
| |
| static int ath9k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| *tx_ant = sc->ant_tx; |
| *rx_ant = sc->ant_rx; |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static void ath9k_wow_map_triggers(struct ath_softc *sc, |
| struct cfg80211_wowlan *wowlan, |
| u32 *wow_triggers) |
| { |
| if (wowlan->disconnect) |
| *wow_triggers |= AH_WOW_LINK_CHANGE | |
| AH_WOW_BEACON_MISS; |
| if (wowlan->magic_pkt) |
| *wow_triggers |= AH_WOW_MAGIC_PATTERN_EN; |
| |
| if (wowlan->n_patterns) |
| *wow_triggers |= AH_WOW_USER_PATTERN_EN; |
| |
| sc->wow_enabled = *wow_triggers; |
| |
| } |
| |
| static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath9k_hw_capabilities *pcaps = &ah->caps; |
| int pattern_count = 0; |
| int i, byte_cnt; |
| u8 dis_deauth_pattern[MAX_PATTERN_SIZE]; |
| u8 dis_deauth_mask[MAX_PATTERN_SIZE]; |
| |
| memset(dis_deauth_pattern, 0, MAX_PATTERN_SIZE); |
| memset(dis_deauth_mask, 0, MAX_PATTERN_SIZE); |
| |
| /* |
| * Create Dissassociate / Deauthenticate packet filter |
| * |
| * 2 bytes 2 byte 6 bytes 6 bytes 6 bytes |
| * +--------------+----------+---------+--------+--------+---- |
| * + Frame Control+ Duration + DA + SA + BSSID + |
| * +--------------+----------+---------+--------+--------+---- |
| * |
| * The above is the management frame format for disassociate/ |
| * deauthenticate pattern, from this we need to match the first byte |
| * of 'Frame Control' and DA, SA, and BSSID fields |
| * (skipping 2nd byte of FC and Duration feild. |
| * |
| * Disassociate pattern |
| * -------------------- |
| * Frame control = 00 00 1010 |
| * DA, SA, BSSID = x:x:x:x:x:x |
| * Pattern will be A0000000 | x:x:x:x:x:x | x:x:x:x:x:x |
| * | x:x:x:x:x:x -- 22 bytes |
| * |
| * Deauthenticate pattern |
| * ---------------------- |
| * Frame control = 00 00 1100 |
| * DA, SA, BSSID = x:x:x:x:x:x |
| * Pattern will be C0000000 | x:x:x:x:x:x | x:x:x:x:x:x |
| * | x:x:x:x:x:x -- 22 bytes |
| */ |
| |
| /* Create Disassociate Pattern first */ |
| |
| byte_cnt = 0; |
| |
| /* Fill out the mask with all FF's */ |
| |
| for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++) |
| dis_deauth_mask[i] = 0xff; |
| |
| /* copy the first byte of frame control field */ |
| dis_deauth_pattern[byte_cnt] = 0xa0; |
| byte_cnt++; |
| |
| /* skip 2nd byte of frame control and Duration field */ |
| byte_cnt += 3; |
| |
| /* |
| * need not match the destination mac address, it can be a broadcast |
| * mac address or an unicast to this station |
| */ |
| byte_cnt += 6; |
| |
| /* copy the source mac address */ |
| memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN); |
| |
| byte_cnt += 6; |
| |
| /* copy the bssid, its same as the source mac address */ |
| |
| memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN); |
| |
| /* Create Disassociate pattern mask */ |
| |
| if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_EXACT) { |
| |
| if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_DWORD) { |
| /* |
| * for AR9280, because of hardware limitation, the |
| * first 4 bytes have to be matched for all patterns. |
| * the mask for disassociation and de-auth pattern |
| * matching need to enable the first 4 bytes. |
| * also the duration field needs to be filled. |
| */ |
| dis_deauth_mask[0] = 0xf0; |
| |
| /* |
| * fill in duration field |
| FIXME: what is the exact value ? |
| */ |
| dis_deauth_pattern[2] = 0xff; |
| dis_deauth_pattern[3] = 0xff; |
| } else { |
| dis_deauth_mask[0] = 0xfe; |
| } |
| |
| dis_deauth_mask[1] = 0x03; |
| dis_deauth_mask[2] = 0xc0; |
| } else { |
| dis_deauth_mask[0] = 0xef; |
| dis_deauth_mask[1] = 0x3f; |
| dis_deauth_mask[2] = 0x00; |
| dis_deauth_mask[3] = 0xfc; |
| } |
| |
| ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n"); |
| |
| ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask, |
| pattern_count, byte_cnt); |
| |
| pattern_count++; |
| /* |
| * for de-authenticate pattern, only the first byte of the frame |
| * control field gets changed from 0xA0 to 0xC0 |
| */ |
| dis_deauth_pattern[0] = 0xC0; |
| |
| ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask, |
| pattern_count, byte_cnt); |
| |
| } |
| |
| static void ath9k_wow_add_pattern(struct ath_softc *sc, |
| struct cfg80211_wowlan *wowlan) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath9k_wow_pattern *wow_pattern = NULL; |
| struct cfg80211_wowlan_trig_pkt_pattern *patterns = wowlan->patterns; |
| int mask_len; |
| s8 i = 0; |
| |
| if (!wowlan->n_patterns) |
| return; |
| |
| /* |
| * Add the new user configured patterns |
| */ |
| for (i = 0; i < wowlan->n_patterns; i++) { |
| |
| wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL); |
| |
| if (!wow_pattern) |
| return; |
| |
| /* |
| * TODO: convert the generic user space pattern to |
| * appropriate chip specific/802.11 pattern. |
| */ |
| |
| mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8); |
| memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE); |
| memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE); |
| memcpy(wow_pattern->pattern_bytes, patterns[i].pattern, |
| patterns[i].pattern_len); |
| memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len); |
| wow_pattern->pattern_len = patterns[i].pattern_len; |
| |
| /* |
| * just need to take care of deauth and disssoc pattern, |
| * make sure we don't overwrite them. |
| */ |
| |
| ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes, |
| wow_pattern->mask_bytes, |
| i + 2, |
| wow_pattern->pattern_len); |
| kfree(wow_pattern); |
| |
| } |
| |
| } |
| |
| static int ath9k_suspend(struct ieee80211_hw *hw, |
| struct cfg80211_wowlan *wowlan) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| u32 wow_triggers_enabled = 0; |
| int ret = 0; |
| |
| mutex_lock(&sc->mutex); |
| |
| ath_cancel_work(sc); |
| ath_stop_ani(sc); |
| del_timer_sync(&sc->rx_poll_timer); |
| |
| if (test_bit(SC_OP_INVALID, &sc->sc_flags)) { |
| ath_dbg(common, ANY, "Device not present\n"); |
| ret = -EINVAL; |
| goto fail_wow; |
| } |
| |
| if (WARN_ON(!wowlan)) { |
| ath_dbg(common, WOW, "None of the WoW triggers enabled\n"); |
| ret = -EINVAL; |
| goto fail_wow; |
| } |
| |
| if (!device_can_wakeup(sc->dev)) { |
| ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n"); |
| ret = 1; |
| goto fail_wow; |
| } |
| |
| /* |
| * none of the sta vifs are associated |
| * and we are not currently handling multivif |
| * cases, for instance we have to seperately |
| * configure 'keep alive frame' for each |
| * STA. |
| */ |
| |
| if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) { |
| ath_dbg(common, WOW, "None of the STA vifs are associated\n"); |
| ret = 1; |
| goto fail_wow; |
| } |
| |
| if (sc->nvifs > 1) { |
| ath_dbg(common, WOW, "WoW for multivif is not yet supported\n"); |
| ret = 1; |
| goto fail_wow; |
| } |
| |
| ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled); |
| |
| ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n", |
| wow_triggers_enabled); |
| |
| ath9k_ps_wakeup(sc); |
| |
| ath9k_stop_btcoex(sc); |
| |
| /* |
| * Enable wake up on recieving disassoc/deauth |
| * frame by default. |
| */ |
| ath9k_wow_add_disassoc_deauth_pattern(sc); |
| |
| if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN) |
| ath9k_wow_add_pattern(sc, wowlan); |
| |
| spin_lock_bh(&sc->sc_pcu_lock); |
| /* |
| * To avoid false wake, we enable beacon miss interrupt only |
| * when we go to sleep. We save the current interrupt mask |
| * so we can restore it after the system wakes up |
| */ |
| sc->wow_intr_before_sleep = ah->imask; |
| ah->imask &= ~ATH9K_INT_GLOBAL; |
| ath9k_hw_disable_interrupts(ah); |
| ah->imask = ATH9K_INT_BMISS | ATH9K_INT_GLOBAL; |
| ath9k_hw_set_interrupts(ah); |
| ath9k_hw_enable_interrupts(ah); |
| |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| /* |
| * we can now sync irq and kill any running tasklets, since we already |
| * disabled interrupts and not holding a spin lock |
| */ |
| synchronize_irq(sc->irq); |
| tasklet_kill(&sc->intr_tq); |
| |
| ath9k_hw_wow_enable(ah, wow_triggers_enabled); |
| |
| ath9k_ps_restore(sc); |
| ath_dbg(common, ANY, "WoW enabled in ath9k\n"); |
| atomic_inc(&sc->wow_sleep_proc_intr); |
| |
| fail_wow: |
| mutex_unlock(&sc->mutex); |
| return ret; |
| } |
| |
| static int ath9k_resume(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| u32 wow_status; |
| |
| mutex_lock(&sc->mutex); |
| |
| ath9k_ps_wakeup(sc); |
| |
| spin_lock_bh(&sc->sc_pcu_lock); |
| |
| ath9k_hw_disable_interrupts(ah); |
| ah->imask = sc->wow_intr_before_sleep; |
| ath9k_hw_set_interrupts(ah); |
| ath9k_hw_enable_interrupts(ah); |
| |
| spin_unlock_bh(&sc->sc_pcu_lock); |
| |
| wow_status = ath9k_hw_wow_wakeup(ah); |
| |
| if (atomic_read(&sc->wow_got_bmiss_intr) == 0) { |
| /* |
| * some devices may not pick beacon miss |
| * as the reason they woke up so we add |
| * that here for that shortcoming. |
| */ |
| wow_status |= AH_WOW_BEACON_MISS; |
| atomic_dec(&sc->wow_got_bmiss_intr); |
| ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n"); |
| } |
| |
| atomic_dec(&sc->wow_sleep_proc_intr); |
| |
| if (wow_status) { |
| ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n", |
| ath9k_hw_wow_event_to_string(wow_status), wow_status); |
| } |
| |
| ath_restart_work(sc); |
| ath9k_start_btcoex(sc); |
| |
| ath9k_ps_restore(sc); |
| mutex_unlock(&sc->mutex); |
| |
| return 0; |
| } |
| |
| static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| mutex_lock(&sc->mutex); |
| device_init_wakeup(sc->dev, 1); |
| device_set_wakeup_enable(sc->dev, enabled); |
| mutex_unlock(&sc->mutex); |
| } |
| |
| #endif |
| static void ath9k_sw_scan_start(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| sc->scanning = 1; |
| } |
| |
| static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) |
| { |
| struct ath_softc *sc = hw->priv; |
| |
| sc->scanning = 0; |
| } |
| |
| struct ieee80211_ops ath9k_ops = { |
| .tx = ath9k_tx, |
| .start = ath9k_start, |
| .stop = ath9k_stop, |
| .add_interface = ath9k_add_interface, |
| .change_interface = ath9k_change_interface, |
| .remove_interface = ath9k_remove_interface, |
| .config = ath9k_config, |
| .configure_filter = ath9k_configure_filter, |
| .sta_add = ath9k_sta_add, |
| .sta_remove = ath9k_sta_remove, |
| .sta_notify = ath9k_sta_notify, |
| .conf_tx = ath9k_conf_tx, |
| .bss_info_changed = ath9k_bss_info_changed, |
| .set_key = ath9k_set_key, |
| .get_tsf = ath9k_get_tsf, |
| .set_tsf = ath9k_set_tsf, |
| .reset_tsf = ath9k_reset_tsf, |
| .ampdu_action = ath9k_ampdu_action, |
| .get_survey = ath9k_get_survey, |
| .rfkill_poll = ath9k_rfkill_poll_state, |
| .set_coverage_class = ath9k_set_coverage_class, |
| .flush = ath9k_flush, |
| .tx_frames_pending = ath9k_tx_frames_pending, |
| .tx_last_beacon = ath9k_tx_last_beacon, |
| .get_stats = ath9k_get_stats, |
| .set_antenna = ath9k_set_antenna, |
| .get_antenna = ath9k_get_antenna, |
| |
| #ifdef CONFIG_PM_SLEEP |
| .suspend = ath9k_suspend, |
| .resume = ath9k_resume, |
| .set_wakeup = ath9k_set_wakeup, |
| #endif |
| |
| #ifdef CONFIG_ATH9K_DEBUGFS |
| .get_et_sset_count = ath9k_get_et_sset_count, |
| .get_et_stats = ath9k_get_et_stats, |
| .get_et_strings = ath9k_get_et_strings, |
| #endif |
| |
| #if defined(CONFIG_MAC80211_DEBUGFS) && defined(CONFIG_ATH9K_DEBUGFS) |
| .sta_add_debugfs = ath9k_sta_add_debugfs, |
| .sta_remove_debugfs = ath9k_sta_remove_debugfs, |
| #endif |
| .sw_scan_start = ath9k_sw_scan_start, |
| .sw_scan_complete = ath9k_sw_scan_complete, |
| }; |