| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2012 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "../efuse.h" |
| #include "../base.h" |
| #include "../cam.h" |
| #include "../ps.h" |
| #include "../usb.h" |
| #include "reg.h" |
| #include "def.h" |
| #include "phy.h" |
| #include "mac.h" |
| #include "dm.h" |
| #include "hw.h" |
| #include "../rtl8192ce/hw.h" |
| #include "trx.h" |
| #include "led.h" |
| #include "table.h" |
| |
| static void _rtl92cu_phy_param_tab_init(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtlpriv); |
| |
| rtlphy->hwparam_tables[MAC_REG].length = RTL8192CUMAC_2T_ARRAYLENGTH; |
| rtlphy->hwparam_tables[MAC_REG].pdata = RTL8192CUMAC_2T_ARRAY; |
| if (IS_HIGHT_PA(rtlefuse->board_type)) { |
| rtlphy->hwparam_tables[PHY_REG_PG].length = |
| RTL8192CUPHY_REG_Array_PG_HPLength; |
| rtlphy->hwparam_tables[PHY_REG_PG].pdata = |
| RTL8192CUPHY_REG_Array_PG_HP; |
| } else { |
| rtlphy->hwparam_tables[PHY_REG_PG].length = |
| RTL8192CUPHY_REG_ARRAY_PGLENGTH; |
| rtlphy->hwparam_tables[PHY_REG_PG].pdata = |
| RTL8192CUPHY_REG_ARRAY_PG; |
| } |
| /* 2T */ |
| rtlphy->hwparam_tables[PHY_REG_2T].length = |
| RTL8192CUPHY_REG_2TARRAY_LENGTH; |
| rtlphy->hwparam_tables[PHY_REG_2T].pdata = |
| RTL8192CUPHY_REG_2TARRAY; |
| rtlphy->hwparam_tables[RADIOA_2T].length = |
| RTL8192CURADIOA_2TARRAYLENGTH; |
| rtlphy->hwparam_tables[RADIOA_2T].pdata = |
| RTL8192CURADIOA_2TARRAY; |
| rtlphy->hwparam_tables[RADIOB_2T].length = |
| RTL8192CURADIOB_2TARRAYLENGTH; |
| rtlphy->hwparam_tables[RADIOB_2T].pdata = |
| RTL8192CU_RADIOB_2TARRAY; |
| rtlphy->hwparam_tables[AGCTAB_2T].length = |
| RTL8192CUAGCTAB_2TARRAYLENGTH; |
| rtlphy->hwparam_tables[AGCTAB_2T].pdata = |
| RTL8192CUAGCTAB_2TARRAY; |
| /* 1T */ |
| if (IS_HIGHT_PA(rtlefuse->board_type)) { |
| rtlphy->hwparam_tables[PHY_REG_1T].length = |
| RTL8192CUPHY_REG_1T_HPArrayLength; |
| rtlphy->hwparam_tables[PHY_REG_1T].pdata = |
| RTL8192CUPHY_REG_1T_HPArray; |
| rtlphy->hwparam_tables[RADIOA_1T].length = |
| RTL8192CURadioA_1T_HPArrayLength; |
| rtlphy->hwparam_tables[RADIOA_1T].pdata = |
| RTL8192CURadioA_1T_HPArray; |
| rtlphy->hwparam_tables[RADIOB_1T].length = |
| RTL8192CURADIOB_1TARRAYLENGTH; |
| rtlphy->hwparam_tables[RADIOB_1T].pdata = |
| RTL8192CU_RADIOB_1TARRAY; |
| rtlphy->hwparam_tables[AGCTAB_1T].length = |
| RTL8192CUAGCTAB_1T_HPArrayLength; |
| rtlphy->hwparam_tables[AGCTAB_1T].pdata = |
| Rtl8192CUAGCTAB_1T_HPArray; |
| } else { |
| rtlphy->hwparam_tables[PHY_REG_1T].length = |
| RTL8192CUPHY_REG_1TARRAY_LENGTH; |
| rtlphy->hwparam_tables[PHY_REG_1T].pdata = |
| RTL8192CUPHY_REG_1TARRAY; |
| rtlphy->hwparam_tables[RADIOA_1T].length = |
| RTL8192CURADIOA_1TARRAYLENGTH; |
| rtlphy->hwparam_tables[RADIOA_1T].pdata = |
| RTL8192CU_RADIOA_1TARRAY; |
| rtlphy->hwparam_tables[RADIOB_1T].length = |
| RTL8192CURADIOB_1TARRAYLENGTH; |
| rtlphy->hwparam_tables[RADIOB_1T].pdata = |
| RTL8192CU_RADIOB_1TARRAY; |
| rtlphy->hwparam_tables[AGCTAB_1T].length = |
| RTL8192CUAGCTAB_1TARRAYLENGTH; |
| rtlphy->hwparam_tables[AGCTAB_1T].pdata = |
| RTL8192CUAGCTAB_1TARRAY; |
| } |
| } |
| |
| static void _rtl92cu_read_txpower_info_from_hwpg(struct ieee80211_hw *hw, |
| bool autoload_fail, |
| u8 *hwinfo) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| u8 rf_path, index, tempval; |
| u16 i; |
| |
| for (rf_path = 0; rf_path < 2; rf_path++) { |
| for (i = 0; i < 3; i++) { |
| if (!autoload_fail) { |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_cck[rf_path][i] = |
| hwinfo[EEPROM_TXPOWERCCK + rf_path * 3 + i]; |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] = |
| hwinfo[EEPROM_TXPOWERHT40_1S + rf_path * 3 + |
| i]; |
| } else { |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_cck[rf_path][i] = |
| EEPROM_DEFAULT_TXPOWERLEVEL; |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] = |
| EEPROM_DEFAULT_TXPOWERLEVEL; |
| } |
| } |
| } |
| for (i = 0; i < 3; i++) { |
| if (!autoload_fail) |
| tempval = hwinfo[EEPROM_TXPOWERHT40_2SDIFF + i]; |
| else |
| tempval = EEPROM_DEFAULT_HT40_2SDIFF; |
| rtlefuse->eprom_chnl_txpwr_ht40_2sdf[RF90_PATH_A][i] = |
| (tempval & 0xf); |
| rtlefuse->eprom_chnl_txpwr_ht40_2sdf[RF90_PATH_B][i] = |
| ((tempval & 0xf0) >> 4); |
| } |
| for (rf_path = 0; rf_path < 2; rf_path++) |
| for (i = 0; i < 3; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_EEPROM, |
| "RF(%d) EEPROM CCK Area(%d) = 0x%x\n", |
| rf_path, i, |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_cck[rf_path][i]); |
| for (rf_path = 0; rf_path < 2; rf_path++) |
| for (i = 0; i < 3; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_EEPROM, |
| "RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n", |
| rf_path, i, |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path][i]); |
| for (rf_path = 0; rf_path < 2; rf_path++) |
| for (i = 0; i < 3; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_EEPROM, |
| "RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n", |
| rf_path, i, |
| rtlefuse-> |
| eprom_chnl_txpwr_ht40_2sdf[rf_path][i]); |
| for (rf_path = 0; rf_path < 2; rf_path++) { |
| for (i = 0; i < 14; i++) { |
| index = _rtl92c_get_chnl_group((u8) i); |
| rtlefuse->txpwrlevel_cck[rf_path][i] = |
| rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][index]; |
| rtlefuse->txpwrlevel_ht40_1s[rf_path][i] = |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path][index]; |
| if ((rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path][index] - |
| rtlefuse-> |
| eprom_chnl_txpwr_ht40_2sdf[rf_path][index]) |
| > 0) { |
| rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = |
| rtlefuse-> |
| eeprom_chnlarea_txpwr_ht40_1s[rf_path] |
| [index] - rtlefuse-> |
| eprom_chnl_txpwr_ht40_2sdf[rf_path] |
| [index]; |
| } else { |
| rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = 0; |
| } |
| } |
| for (i = 0; i < 14; i++) { |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = [0x%x / 0x%x / 0x%x]\n", rf_path, i, |
| rtlefuse->txpwrlevel_cck[rf_path][i], |
| rtlefuse->txpwrlevel_ht40_1s[rf_path][i], |
| rtlefuse->txpwrlevel_ht40_2s[rf_path][i]); |
| } |
| } |
| for (i = 0; i < 3; i++) { |
| if (!autoload_fail) { |
| rtlefuse->eeprom_pwrlimit_ht40[i] = |
| hwinfo[EEPROM_TXPWR_GROUP + i]; |
| rtlefuse->eeprom_pwrlimit_ht20[i] = |
| hwinfo[EEPROM_TXPWR_GROUP + 3 + i]; |
| } else { |
| rtlefuse->eeprom_pwrlimit_ht40[i] = 0; |
| rtlefuse->eeprom_pwrlimit_ht20[i] = 0; |
| } |
| } |
| for (rf_path = 0; rf_path < 2; rf_path++) { |
| for (i = 0; i < 14; i++) { |
| index = _rtl92c_get_chnl_group((u8) i); |
| if (rf_path == RF90_PATH_A) { |
| rtlefuse->pwrgroup_ht20[rf_path][i] = |
| (rtlefuse->eeprom_pwrlimit_ht20[index] |
| & 0xf); |
| rtlefuse->pwrgroup_ht40[rf_path][i] = |
| (rtlefuse->eeprom_pwrlimit_ht40[index] |
| & 0xf); |
| } else if (rf_path == RF90_PATH_B) { |
| rtlefuse->pwrgroup_ht20[rf_path][i] = |
| ((rtlefuse->eeprom_pwrlimit_ht20[index] |
| & 0xf0) >> 4); |
| rtlefuse->pwrgroup_ht40[rf_path][i] = |
| ((rtlefuse->eeprom_pwrlimit_ht40[index] |
| & 0xf0) >> 4); |
| } |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-%d pwrgroup_ht20[%d] = 0x%x\n", |
| rf_path, i, |
| rtlefuse->pwrgroup_ht20[rf_path][i]); |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-%d pwrgroup_ht40[%d] = 0x%x\n", |
| rf_path, i, |
| rtlefuse->pwrgroup_ht40[rf_path][i]); |
| } |
| } |
| for (i = 0; i < 14; i++) { |
| index = _rtl92c_get_chnl_group((u8) i); |
| if (!autoload_fail) |
| tempval = hwinfo[EEPROM_TXPOWERHT20DIFF + index]; |
| else |
| tempval = EEPROM_DEFAULT_HT20_DIFF; |
| rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF); |
| rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] = |
| ((tempval >> 4) & 0xF); |
| if (rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] & BIT(3)) |
| rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] |= 0xF0; |
| if (rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] & BIT(3)) |
| rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] |= 0xF0; |
| index = _rtl92c_get_chnl_group((u8) i); |
| if (!autoload_fail) |
| tempval = hwinfo[EEPROM_TXPOWER_OFDMDIFF + index]; |
| else |
| tempval = EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; |
| rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] = (tempval & 0xF); |
| rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] = |
| ((tempval >> 4) & 0xF); |
| } |
| rtlefuse->legacy_ht_txpowerdiff = |
| rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][7]; |
| for (i = 0; i < 14; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", |
| i, rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]); |
| for (i = 0; i < 14; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", |
| i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]); |
| for (i = 0; i < 14; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", |
| i, rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]); |
| for (i = 0; i < 14; i++) |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "RF-B Legacy to HT40 Diff[%d] = 0x%x\n", |
| i, rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]); |
| if (!autoload_fail) |
| rtlefuse->eeprom_regulatory = (hwinfo[RF_OPTION1] & 0x7); |
| else |
| rtlefuse->eeprom_regulatory = 0; |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory); |
| if (!autoload_fail) { |
| rtlefuse->eeprom_tssi[RF90_PATH_A] = hwinfo[EEPROM_TSSI_A]; |
| rtlefuse->eeprom_tssi[RF90_PATH_B] = hwinfo[EEPROM_TSSI_B]; |
| } else { |
| rtlefuse->eeprom_tssi[RF90_PATH_A] = EEPROM_DEFAULT_TSSI; |
| rtlefuse->eeprom_tssi[RF90_PATH_B] = EEPROM_DEFAULT_TSSI; |
| } |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "TSSI_A = 0x%x, TSSI_B = 0x%x\n", |
| rtlefuse->eeprom_tssi[RF90_PATH_A], |
| rtlefuse->eeprom_tssi[RF90_PATH_B]); |
| if (!autoload_fail) |
| tempval = hwinfo[EEPROM_THERMAL_METER]; |
| else |
| tempval = EEPROM_DEFAULT_THERMALMETER; |
| rtlefuse->eeprom_thermalmeter = (tempval & 0x1f); |
| if (rtlefuse->eeprom_thermalmeter < 0x06 || |
| rtlefuse->eeprom_thermalmeter > 0x1c) |
| rtlefuse->eeprom_thermalmeter = 0x12; |
| if (rtlefuse->eeprom_thermalmeter == 0x1f || autoload_fail) |
| rtlefuse->apk_thermalmeterignore = true; |
| rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter; |
| RTPRINT(rtlpriv, FINIT, INIT_TXPOWER, |
| "thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter); |
| } |
| |
| static void _rtl92cu_read_board_type(struct ieee80211_hw *hw, u8 *contents) |
| { |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u8 boardType; |
| |
| if (IS_NORMAL_CHIP(rtlhal->version)) { |
| boardType = ((contents[EEPROM_RF_OPT1]) & |
| BOARD_TYPE_NORMAL_MASK) >> 5; /*bit[7:5]*/ |
| } else { |
| boardType = contents[EEPROM_RF_OPT4]; |
| boardType &= BOARD_TYPE_TEST_MASK; |
| } |
| rtlefuse->board_type = boardType; |
| if (IS_HIGHT_PA(rtlefuse->board_type)) |
| rtlefuse->external_pa = 1; |
| pr_info("Board Type %x\n", rtlefuse->board_type); |
| } |
| |
| static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u16 i, usvalue; |
| u8 hwinfo[HWSET_MAX_SIZE] = {0}; |
| u16 eeprom_id; |
| |
| if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { |
| rtl_efuse_shadow_map_update(hw); |
| memcpy((void *)hwinfo, |
| (void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0], |
| HWSET_MAX_SIZE); |
| } else if (rtlefuse->epromtype == EEPROM_93C46) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "RTL819X Not boot from eeprom, check it !!\n"); |
| } |
| RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, "MAP", |
| hwinfo, HWSET_MAX_SIZE); |
| eeprom_id = le16_to_cpu(*((__le16 *)&hwinfo[0])); |
| if (eeprom_id != RTL8190_EEPROM_ID) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "EEPROM ID(%#x) is invalid!!\n", eeprom_id); |
| rtlefuse->autoload_failflag = true; |
| } else { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); |
| rtlefuse->autoload_failflag = false; |
| } |
| if (rtlefuse->autoload_failflag) |
| return; |
| for (i = 0; i < 6; i += 2) { |
| usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i]; |
| *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; |
| } |
| pr_info("MAC address: %pM\n", rtlefuse->dev_addr); |
| _rtl92cu_read_txpower_info_from_hwpg(hw, |
| rtlefuse->autoload_failflag, hwinfo); |
| rtlefuse->eeprom_vid = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VID]); |
| rtlefuse->eeprom_did = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_DID]); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, " VID = 0x%02x PID = 0x%02x\n", |
| rtlefuse->eeprom_vid, rtlefuse->eeprom_did); |
| rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN]; |
| rtlefuse->eeprom_version = |
| le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VERSION]); |
| rtlefuse->txpwr_fromeprom = true; |
| rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID]; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x\n", |
| rtlefuse->eeprom_oemid); |
| if (rtlhal->oem_id == RT_CID_DEFAULT) { |
| switch (rtlefuse->eeprom_oemid) { |
| case EEPROM_CID_DEFAULT: |
| if (rtlefuse->eeprom_did == 0x8176) { |
| if ((rtlefuse->eeprom_svid == 0x103C && |
| rtlefuse->eeprom_smid == 0x1629)) |
| rtlhal->oem_id = RT_CID_819x_HP; |
| else |
| rtlhal->oem_id = RT_CID_DEFAULT; |
| } else { |
| rtlhal->oem_id = RT_CID_DEFAULT; |
| } |
| break; |
| case EEPROM_CID_TOSHIBA: |
| rtlhal->oem_id = RT_CID_TOSHIBA; |
| break; |
| case EEPROM_CID_QMI: |
| rtlhal->oem_id = RT_CID_819x_QMI; |
| break; |
| case EEPROM_CID_WHQL: |
| default: |
| rtlhal->oem_id = RT_CID_DEFAULT; |
| break; |
| } |
| } |
| _rtl92cu_read_board_type(hw, hwinfo); |
| } |
| |
| static void _rtl92cu_hal_customized_behavior(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| |
| switch (rtlhal->oem_id) { |
| case RT_CID_819x_HP: |
| usb_priv->ledctl.led_opendrain = true; |
| break; |
| case RT_CID_819x_Lenovo: |
| case RT_CID_DEFAULT: |
| case RT_CID_TOSHIBA: |
| case RT_CID_CCX: |
| case RT_CID_819x_Acer: |
| case RT_CID_WHQL: |
| default: |
| break; |
| } |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RT Customized ID: 0x%02X\n", |
| rtlhal->oem_id); |
| } |
| |
| void rtl92cu_read_eeprom_info(struct ieee80211_hw *hw) |
| { |
| |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u8 tmp_u1b; |
| |
| if (!IS_NORMAL_CHIP(rtlhal->version)) |
| return; |
| tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR); |
| rtlefuse->epromtype = (tmp_u1b & BOOT_FROM_EEPROM) ? |
| EEPROM_93C46 : EEPROM_BOOT_EFUSE; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "Boot from %s\n", |
| tmp_u1b & BOOT_FROM_EEPROM ? "EERROM" : "EFUSE"); |
| rtlefuse->autoload_failflag = (tmp_u1b & EEPROM_EN) ? false : true; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload %s\n", |
| tmp_u1b & EEPROM_EN ? "OK!!" : "ERR!!"); |
| _rtl92cu_read_adapter_info(hw); |
| _rtl92cu_hal_customized_behavior(hw); |
| return; |
| } |
| |
| static int _rtl92cu_init_power_on(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| int status = 0; |
| u16 value16; |
| u8 value8; |
| /* polling autoload done. */ |
| u32 pollingCount = 0; |
| |
| do { |
| if (rtl_read_byte(rtlpriv, REG_APS_FSMCO) & PFM_ALDN) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, |
| "Autoload Done!\n"); |
| break; |
| } |
| if (pollingCount++ > 100) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| "Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n"); |
| return -ENODEV; |
| } |
| } while (true); |
| /* 0. RSV_CTRL 0x1C[7:0] = 0 unlock ISO/CLK/Power control register */ |
| rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0); |
| /* Power on when re-enter from IPS/Radio off/card disable */ |
| /* enable SPS into PWM mode */ |
| rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); |
| udelay(100); |
| value8 = rtl_read_byte(rtlpriv, REG_LDOV12D_CTRL); |
| if (0 == (value8 & LDV12_EN)) { |
| value8 |= LDV12_EN; |
| rtl_write_byte(rtlpriv, REG_LDOV12D_CTRL, value8); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, |
| " power-on :REG_LDOV12D_CTRL Reg0x21:0x%02x\n", |
| value8); |
| udelay(100); |
| value8 = rtl_read_byte(rtlpriv, REG_SYS_ISO_CTRL); |
| value8 &= ~ISO_MD2PP; |
| rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, value8); |
| } |
| /* auto enable WLAN */ |
| pollingCount = 0; |
| value16 = rtl_read_word(rtlpriv, REG_APS_FSMCO); |
| value16 |= APFM_ONMAC; |
| rtl_write_word(rtlpriv, REG_APS_FSMCO, value16); |
| do { |
| if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO) & APFM_ONMAC)) { |
| pr_info("MAC auto ON okay!\n"); |
| break; |
| } |
| if (pollingCount++ > 100) { |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, |
| "Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n"); |
| return -ENODEV; |
| } |
| } while (true); |
| /* Enable Radio ,GPIO ,and LED function */ |
| rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x0812); |
| /* release RF digital isolation */ |
| value16 = rtl_read_word(rtlpriv, REG_SYS_ISO_CTRL); |
| value16 &= ~ISO_DIOR; |
| rtl_write_word(rtlpriv, REG_SYS_ISO_CTRL, value16); |
| /* Reconsider when to do this operation after asking HWSD. */ |
| pollingCount = 0; |
| rtl_write_byte(rtlpriv, REG_APSD_CTRL, (rtl_read_byte(rtlpriv, |
| REG_APSD_CTRL) & ~BIT(6))); |
| do { |
| pollingCount++; |
| } while ((pollingCount < 200) && |
| (rtl_read_byte(rtlpriv, REG_APSD_CTRL) & BIT(7))); |
| /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ |
| value16 = rtl_read_word(rtlpriv, REG_CR); |
| value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN | |
| PROTOCOL_EN | SCHEDULE_EN | MACTXEN | MACRXEN | ENSEC); |
| rtl_write_word(rtlpriv, REG_CR, value16); |
| return status; |
| } |
| |
| static void _rtl92cu_init_queue_reserved_page(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 out_ep_num, |
| u8 queue_sel) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| bool isChipN = IS_NORMAL_CHIP(rtlhal->version); |
| u32 outEPNum = (u32)out_ep_num; |
| u32 numHQ = 0; |
| u32 numLQ = 0; |
| u32 numNQ = 0; |
| u32 numPubQ; |
| u32 value32; |
| u8 value8; |
| u32 txQPageNum, txQPageUnit, txQRemainPage; |
| |
| if (!wmm_enable) { |
| numPubQ = (isChipN) ? CHIP_B_PAGE_NUM_PUBQ : |
| CHIP_A_PAGE_NUM_PUBQ; |
| txQPageNum = TX_TOTAL_PAGE_NUMBER - numPubQ; |
| |
| txQPageUnit = txQPageNum/outEPNum; |
| txQRemainPage = txQPageNum % outEPNum; |
| if (queue_sel & TX_SELE_HQ) |
| numHQ = txQPageUnit; |
| if (queue_sel & TX_SELE_LQ) |
| numLQ = txQPageUnit; |
| /* HIGH priority queue always present in the configuration of |
| * 2 out-ep. Remainder pages have assigned to High queue */ |
| if ((outEPNum > 1) && (txQRemainPage)) |
| numHQ += txQRemainPage; |
| /* NOTE: This step done before writting REG_RQPN. */ |
| if (isChipN) { |
| if (queue_sel & TX_SELE_NQ) |
| numNQ = txQPageUnit; |
| value8 = (u8)_NPQ(numNQ); |
| rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); |
| } |
| } else { |
| /* for WMM ,number of out-ep must more than or equal to 2! */ |
| numPubQ = isChipN ? WMM_CHIP_B_PAGE_NUM_PUBQ : |
| WMM_CHIP_A_PAGE_NUM_PUBQ; |
| if (queue_sel & TX_SELE_HQ) { |
| numHQ = isChipN ? WMM_CHIP_B_PAGE_NUM_HPQ : |
| WMM_CHIP_A_PAGE_NUM_HPQ; |
| } |
| if (queue_sel & TX_SELE_LQ) { |
| numLQ = isChipN ? WMM_CHIP_B_PAGE_NUM_LPQ : |
| WMM_CHIP_A_PAGE_NUM_LPQ; |
| } |
| /* NOTE: This step done before writting REG_RQPN. */ |
| if (isChipN) { |
| if (queue_sel & TX_SELE_NQ) |
| numNQ = WMM_CHIP_B_PAGE_NUM_NPQ; |
| value8 = (u8)_NPQ(numNQ); |
| rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); |
| } |
| } |
| /* TX DMA */ |
| value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN; |
| rtl_write_dword(rtlpriv, REG_RQPN, value32); |
| } |
| |
| static void _rtl92c_init_trx_buffer(struct ieee80211_hw *hw, bool wmm_enable) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u8 txpktbuf_bndy; |
| u8 value8; |
| |
| if (!wmm_enable) |
| txpktbuf_bndy = TX_PAGE_BOUNDARY; |
| else /* for WMM */ |
| txpktbuf_bndy = (IS_NORMAL_CHIP(rtlhal->version)) |
| ? WMM_CHIP_B_TX_PAGE_BOUNDARY |
| : WMM_CHIP_A_TX_PAGE_BOUNDARY; |
| rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); |
| rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); |
| rtl_write_byte(rtlpriv, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy); |
| rtl_write_byte(rtlpriv, REG_TRXFF_BNDY, txpktbuf_bndy); |
| rtl_write_byte(rtlpriv, REG_TDECTRL+1, txpktbuf_bndy); |
| rtl_write_word(rtlpriv, (REG_TRXFF_BNDY + 2), 0x27FF); |
| value8 = _PSRX(RX_PAGE_SIZE_REG_VALUE) | _PSTX(PBP_128); |
| rtl_write_byte(rtlpriv, REG_PBP, value8); |
| } |
| |
| static void _rtl92c_init_chipN_reg_priority(struct ieee80211_hw *hw, u16 beQ, |
| u16 bkQ, u16 viQ, u16 voQ, |
| u16 mgtQ, u16 hiQ) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u16 value16 = (rtl_read_word(rtlpriv, REG_TRXDMA_CTRL) & 0x7); |
| |
| value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) | |
| _TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) | |
| _TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ); |
| rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, value16); |
| } |
| |
| static void _rtl92cu_init_chipN_one_out_ep_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 queue_sel) |
| { |
| u16 uninitialized_var(value); |
| |
| switch (queue_sel) { |
| case TX_SELE_HQ: |
| value = QUEUE_HIGH; |
| break; |
| case TX_SELE_LQ: |
| value = QUEUE_LOW; |
| break; |
| case TX_SELE_NQ: |
| value = QUEUE_NORMAL; |
| break; |
| default: |
| WARN_ON(1); /* Shall not reach here! */ |
| break; |
| } |
| _rtl92c_init_chipN_reg_priority(hw, value, value, value, value, |
| value, value); |
| pr_info("Tx queue select: 0x%02x\n", queue_sel); |
| } |
| |
| static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 queue_sel) |
| { |
| u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; |
| u16 uninitialized_var(valueHi); |
| u16 uninitialized_var(valueLow); |
| |
| switch (queue_sel) { |
| case (TX_SELE_HQ | TX_SELE_LQ): |
| valueHi = QUEUE_HIGH; |
| valueLow = QUEUE_LOW; |
| break; |
| case (TX_SELE_NQ | TX_SELE_LQ): |
| valueHi = QUEUE_NORMAL; |
| valueLow = QUEUE_LOW; |
| break; |
| case (TX_SELE_HQ | TX_SELE_NQ): |
| valueHi = QUEUE_HIGH; |
| valueLow = QUEUE_NORMAL; |
| break; |
| default: |
| WARN_ON(1); |
| break; |
| } |
| if (!wmm_enable) { |
| beQ = valueLow; |
| bkQ = valueLow; |
| viQ = valueHi; |
| voQ = valueHi; |
| mgtQ = valueHi; |
| hiQ = valueHi; |
| } else {/* for WMM ,CONFIG_OUT_EP_WIFI_MODE */ |
| beQ = valueHi; |
| bkQ = valueLow; |
| viQ = valueLow; |
| voQ = valueHi; |
| mgtQ = valueHi; |
| hiQ = valueHi; |
| } |
| _rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ); |
| pr_info("Tx queue select: 0x%02x\n", queue_sel); |
| } |
| |
| static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 queue_sel) |
| { |
| u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| if (!wmm_enable) { /* typical setting */ |
| beQ = QUEUE_LOW; |
| bkQ = QUEUE_LOW; |
| viQ = QUEUE_NORMAL; |
| voQ = QUEUE_HIGH; |
| mgtQ = QUEUE_HIGH; |
| hiQ = QUEUE_HIGH; |
| } else { /* for WMM */ |
| beQ = QUEUE_LOW; |
| bkQ = QUEUE_NORMAL; |
| viQ = QUEUE_NORMAL; |
| voQ = QUEUE_HIGH; |
| mgtQ = QUEUE_HIGH; |
| hiQ = QUEUE_HIGH; |
| } |
| _rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n", |
| queue_sel); |
| } |
| |
| static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 out_ep_num, |
| u8 queue_sel) |
| { |
| switch (out_ep_num) { |
| case 1: |
| _rtl92cu_init_chipN_one_out_ep_priority(hw, wmm_enable, |
| queue_sel); |
| break; |
| case 2: |
| _rtl92cu_init_chipN_two_out_ep_priority(hw, wmm_enable, |
| queue_sel); |
| break; |
| case 3: |
| _rtl92cu_init_chipN_three_out_ep_priority(hw, wmm_enable, |
| queue_sel); |
| break; |
| default: |
| WARN_ON(1); /* Shall not reach here! */ |
| break; |
| } |
| } |
| |
| static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 out_ep_num, |
| u8 queue_sel) |
| { |
| u8 hq_sele = 0; |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| switch (out_ep_num) { |
| case 2: /* (TX_SELE_HQ|TX_SELE_LQ) */ |
| if (!wmm_enable) /* typical setting */ |
| hq_sele = HQSEL_VOQ | HQSEL_VIQ | HQSEL_MGTQ | |
| HQSEL_HIQ; |
| else /* for WMM */ |
| hq_sele = HQSEL_VOQ | HQSEL_BEQ | HQSEL_MGTQ | |
| HQSEL_HIQ; |
| break; |
| case 1: |
| if (TX_SELE_LQ == queue_sel) { |
| /* map all endpoint to Low queue */ |
| hq_sele = 0; |
| } else if (TX_SELE_HQ == queue_sel) { |
| /* map all endpoint to High queue */ |
| hq_sele = HQSEL_VOQ | HQSEL_VIQ | HQSEL_BEQ | |
| HQSEL_BKQ | HQSEL_MGTQ | HQSEL_HIQ; |
| } |
| break; |
| default: |
| WARN_ON(1); /* Shall not reach here! */ |
| break; |
| } |
| rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele); |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n", |
| hq_sele); |
| } |
| |
| static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw, |
| bool wmm_enable, |
| u8 out_ep_num, |
| u8 queue_sel) |
| { |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| if (IS_NORMAL_CHIP(rtlhal->version)) |
| _rtl92cu_init_chipN_queue_priority(hw, wmm_enable, out_ep_num, |
| queue_sel); |
| else |
| _rtl92cu_init_chipT_queue_priority(hw, wmm_enable, out_ep_num, |
| queue_sel); |
| } |
| |
| static void _rtl92cu_init_usb_aggregation(struct ieee80211_hw *hw) |
| { |
| } |
| |
| static void _rtl92cu_init_wmac_setting(struct ieee80211_hw *hw) |
| { |
| u16 value16; |
| |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| |
| mac->rx_conf = (RCR_APM | RCR_AM | RCR_ADF | RCR_AB | RCR_APPFCS | |
| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | |
| RCR_APP_MIC | RCR_APP_PHYSTS | RCR_ACRC32); |
| rtl_write_dword(rtlpriv, REG_RCR, mac->rx_conf); |
| /* Accept all multicast address */ |
| rtl_write_dword(rtlpriv, REG_MAR, 0xFFFFFFFF); |
| rtl_write_dword(rtlpriv, REG_MAR + 4, 0xFFFFFFFF); |
| /* Accept all management frames */ |
| value16 = 0xFFFF; |
| rtl92c_set_mgt_filter(hw, value16); |
| /* Reject all control frame - default value is 0 */ |
| rtl92c_set_ctrl_filter(hw, 0x0); |
| /* Accept all data frames */ |
| value16 = 0xFFFF; |
| rtl92c_set_data_filter(hw, value16); |
| } |
| |
| static int _rtl92cu_init_mac(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); |
| struct rtl_usb *rtlusb = rtl_usbdev(usb_priv); |
| int err = 0; |
| u32 boundary = 0; |
| u8 wmm_enable = false; /* TODO */ |
| u8 out_ep_nums = rtlusb->out_ep_nums; |
| u8 queue_sel = rtlusb->out_queue_sel; |
| err = _rtl92cu_init_power_on(hw); |
| |
| if (err) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "Failed to init power on!\n"); |
| return err; |
| } |
| if (!wmm_enable) { |
| boundary = TX_PAGE_BOUNDARY; |
| } else { /* for WMM */ |
| boundary = (IS_NORMAL_CHIP(rtlhal->version)) |
| ? WMM_CHIP_B_TX_PAGE_BOUNDARY |
| : WMM_CHIP_A_TX_PAGE_BOUNDARY; |
| } |
| if (false == rtl92c_init_llt_table(hw, boundary)) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "Failed to init LLT Table!\n"); |
| return -EINVAL; |
| } |
| _rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums, |
| queue_sel); |
| _rtl92c_init_trx_buffer(hw, wmm_enable); |
| _rtl92cu_init_queue_priority(hw, wmm_enable, out_ep_nums, |
| queue_sel); |
| /* Get Rx PHY status in order to report RSSI and others. */ |
| rtl92c_init_driver_info_size(hw, RTL92C_DRIVER_INFO_SIZE); |
| rtl92c_init_interrupt(hw); |
| rtl92c_init_network_type(hw); |
| _rtl92cu_init_wmac_setting(hw); |
| rtl92c_init_adaptive_ctrl(hw); |
| rtl92c_init_edca(hw); |
| rtl92c_init_rate_fallback(hw); |
| rtl92c_init_retry_function(hw); |
| _rtl92cu_init_usb_aggregation(hw); |
| rtlpriv->cfg->ops->set_bw_mode(hw, NL80211_CHAN_HT20); |
| rtl92c_set_min_space(hw, IS_92C_SERIAL(rtlhal->version)); |
| rtl92c_init_beacon_parameters(hw, rtlhal->version); |
| rtl92c_init_ampdu_aggregation(hw); |
| rtl92c_init_beacon_max_error(hw, true); |
| return err; |
| } |
| |
| void rtl92cu_enable_hw_security_config(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 sec_reg_value = 0x0; |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, |
| "PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", |
| rtlpriv->sec.pairwise_enc_algorithm, |
| rtlpriv->sec.group_enc_algorithm); |
| if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, |
| "not open sw encryption\n"); |
| return; |
| } |
| sec_reg_value = SCR_TxEncEnable | SCR_RxDecEnable; |
| if (rtlpriv->sec.use_defaultkey) { |
| sec_reg_value |= SCR_TxUseDK; |
| sec_reg_value |= SCR_RxUseDK; |
| } |
| if (IS_NORMAL_CHIP(rtlhal->version)) |
| sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK); |
| rtl_write_byte(rtlpriv, REG_CR + 1, 0x02); |
| RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, "The SECR-value %x\n", |
| sec_reg_value); |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); |
| } |
| |
| static void _rtl92cu_hw_configure(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| |
| /* To Fix MAC loopback mode fail. */ |
| rtl_write_byte(rtlpriv, REG_LDOHCI12_CTRL, 0x0f); |
| rtl_write_byte(rtlpriv, 0x15, 0xe9); |
| /* HW SEQ CTRL */ |
| /* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */ |
| rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); |
| /* fixed USB interface interference issue */ |
| rtl_write_byte(rtlpriv, 0xfe40, 0xe0); |
| rtl_write_byte(rtlpriv, 0xfe41, 0x8d); |
| rtl_write_byte(rtlpriv, 0xfe42, 0x80); |
| rtlusb->reg_bcn_ctrl_val = 0x18; |
| rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8)rtlusb->reg_bcn_ctrl_val); |
| } |
| |
| static void _InitPABias(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u8 pa_setting; |
| |
| /* FIXED PA current issue */ |
| pa_setting = efuse_read_1byte(hw, 0x1FA); |
| if (!(pa_setting & BIT(0))) { |
| rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x0F406); |
| rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x4F406); |
| rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0x8F406); |
| rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0FFFFF, 0xCF406); |
| } |
| if (!(pa_setting & BIT(1)) && IS_NORMAL_CHIP(rtlhal->version) && |
| IS_92C_SERIAL(rtlhal->version)) { |
| rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x0F406); |
| rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x4F406); |
| rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0x8F406); |
| rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0FFFFF, 0xCF406); |
| } |
| if (!(pa_setting & BIT(4))) { |
| pa_setting = rtl_read_byte(rtlpriv, 0x16); |
| pa_setting &= 0x0F; |
| rtl_write_byte(rtlpriv, 0x16, pa_setting | 0x90); |
| } |
| } |
| |
| static void _update_mac_setting(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| |
| mac->rx_conf = rtl_read_dword(rtlpriv, REG_RCR); |
| mac->rx_mgt_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP0); |
| mac->rx_ctrl_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP1); |
| mac->rx_data_filter = rtl_read_word(rtlpriv, REG_RXFLTMAP2); |
| } |
| |
| int rtl92cu_hw_init(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| int err = 0; |
| static bool iqk_initialized; |
| |
| rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU; |
| err = _rtl92cu_init_mac(hw); |
| if (err) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n"); |
| return err; |
| } |
| err = rtl92c_download_fw(hw); |
| if (err) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| "Failed to download FW. Init HW without FW now..\n"); |
| err = 1; |
| return err; |
| } |
| rtlhal->last_hmeboxnum = 0; /* h2c */ |
| _rtl92cu_phy_param_tab_init(hw); |
| rtl92cu_phy_mac_config(hw); |
| rtl92cu_phy_bb_config(hw); |
| rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; |
| rtl92c_phy_rf_config(hw); |
| if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && |
| !IS_92C_SERIAL(rtlhal->version)) { |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1, MASKDWORD, 0x30255); |
| rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G2, MASKDWORD, 0x50a00); |
| } |
| rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, |
| RF_CHNLBW, RFREG_OFFSET_MASK); |
| rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, |
| RF_CHNLBW, RFREG_OFFSET_MASK); |
| rtl92cu_bb_block_on(hw); |
| rtl_cam_reset_all_entry(hw); |
| rtl92cu_enable_hw_security_config(hw); |
| ppsc->rfpwr_state = ERFON; |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); |
| if (ppsc->rfpwr_state == ERFON) { |
| rtl92c_phy_set_rfpath_switch(hw, 1); |
| if (iqk_initialized) { |
| rtl92c_phy_iq_calibrate(hw, false); |
| } else { |
| rtl92c_phy_iq_calibrate(hw, false); |
| iqk_initialized = true; |
| } |
| rtl92c_dm_check_txpower_tracking(hw); |
| rtl92c_phy_lc_calibrate(hw); |
| } |
| _rtl92cu_hw_configure(hw); |
| _InitPABias(hw); |
| _update_mac_setting(hw); |
| rtl92c_dm_init(hw); |
| return err; |
| } |
| |
| static void _DisableRFAFEAndResetBB(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| /************************************** |
| a. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue |
| b. RF path 0 offset 0x00 = 0x00 disable RF |
| c. APSD_CTRL 0x600[7:0] = 0x40 |
| d. SYS_FUNC_EN 0x02[7:0] = 0x16 reset BB state machine |
| e. SYS_FUNC_EN 0x02[7:0] = 0x14 reset BB state machine |
| ***************************************/ |
| u8 eRFPath = 0, value8 = 0; |
| rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF); |
| rtl_set_rfreg(hw, (enum radio_path)eRFPath, 0x0, MASKBYTE0, 0x0); |
| |
| value8 |= APSDOFF; |
| rtl_write_byte(rtlpriv, REG_APSD_CTRL, value8); /*0x40*/ |
| value8 = 0; |
| value8 |= (FEN_USBD | FEN_USBA | FEN_BB_GLB_RSTn); |
| rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, value8);/*0x16*/ |
| value8 &= (~FEN_BB_GLB_RSTn); |
| rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, value8); /*0x14*/ |
| } |
| |
| static void _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| |
| if (rtlhal->fw_version <= 0x20) { |
| /***************************** |
| f. MCUFWDL 0x80[7:0]=0 reset MCU ready status |
| g. SYS_FUNC_EN 0x02[10]= 0 reset MCU reg, (8051 reset) |
| h. SYS_FUNC_EN 0x02[15-12]= 5 reset MAC reg, DCORE |
| i. SYS_FUNC_EN 0x02[10]= 1 enable MCU reg, (8051 enable) |
| ******************************/ |
| u16 valu16 = 0; |
| |
| rtl_write_byte(rtlpriv, REG_MCUFWDL, 0); |
| valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); |
| rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 & |
| (~FEN_CPUEN))); /* reset MCU ,8051 */ |
| valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN)&0x0FFF; |
| rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 | |
| (FEN_HWPDN|FEN_ELDR))); /* reset MAC */ |
| valu16 = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN); |
| rtl_write_word(rtlpriv, REG_SYS_FUNC_EN, (valu16 | |
| FEN_CPUEN)); /* enable MCU ,8051 */ |
| } else { |
| u8 retry_cnts = 0; |
| |
| /* IF fw in RAM code, do reset */ |
| if (rtl_read_byte(rtlpriv, REG_MCUFWDL) & BIT(1)) { |
| /* reset MCU ready status */ |
| rtl_write_byte(rtlpriv, REG_MCUFWDL, 0); |
| /* 8051 reset by self */ |
| rtl_write_byte(rtlpriv, REG_HMETFR+3, 0x20); |
| while ((retry_cnts++ < 100) && |
| (FEN_CPUEN & rtl_read_word(rtlpriv, |
| REG_SYS_FUNC_EN))) { |
| udelay(50); |
| } |
| if (retry_cnts >= 100) { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "#####=> 8051 reset failed!.........................\n"); |
| /* if 8051 reset fail, reset MAC. */ |
| rtl_write_byte(rtlpriv, |
| REG_SYS_FUNC_EN + 1, |
| 0x50); |
| udelay(100); |
| } |
| } |
| /* Reset MAC and Enable 8051 */ |
| rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x54); |
| rtl_write_byte(rtlpriv, REG_MCUFWDL, 0); |
| } |
| if (bWithoutHWSM) { |
| /***************************** |
| Without HW auto state machine |
| g.SYS_CLKR 0x08[15:0] = 0x30A3 disable MAC clock |
| h.AFE_PLL_CTRL 0x28[7:0] = 0x80 disable AFE PLL |
| i.AFE_XTAL_CTRL 0x24[15:0] = 0x880F gated AFE DIG_CLOCK |
| j.SYS_ISu_CTRL 0x00[7:0] = 0xF9 isolated digital to PON |
| ******************************/ |
| rtl_write_word(rtlpriv, REG_SYS_CLKR, 0x70A3); |
| rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); |
| rtl_write_word(rtlpriv, REG_AFE_XTAL_CTRL, 0x880F); |
| rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL, 0xF9); |
| } |
| } |
| |
| static void _ResetDigitalProcedure2(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| /***************************** |
| k. SYS_FUNC_EN 0x03[7:0] = 0x44 disable ELDR runction |
| l. SYS_CLKR 0x08[15:0] = 0x3083 disable ELDR clock |
| m. SYS_ISO_CTRL 0x01[7:0] = 0x83 isolated ELDR to PON |
| ******************************/ |
| rtl_write_word(rtlpriv, REG_SYS_CLKR, 0x70A3); |
| rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL+1, 0x82); |
| } |
| |
| static void _DisableGPIO(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| /*************************************** |
| j. GPIO_PIN_CTRL 0x44[31:0]=0x000 |
| k. Value = GPIO_PIN_CTRL[7:0] |
| l. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); write ext PIN level |
| m. GPIO_MUXCFG 0x42 [15:0] = 0x0780 |
| n. LEDCFG 0x4C[15:0] = 0x8080 |
| ***************************************/ |
| u8 value8; |
| u16 value16; |
| u32 value32; |
| |
| /* 1. Disable GPIO[7:0] */ |
| rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, 0x0000); |
| value32 = rtl_read_dword(rtlpriv, REG_GPIO_PIN_CTRL) & 0xFFFF00FF; |
| value8 = (u8) (value32&0x000000FF); |
| value32 |= ((value8<<8) | 0x00FF0000); |
| rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, value32); |
| /* 2. Disable GPIO[10:8] */ |
| rtl_write_byte(rtlpriv, REG_GPIO_MUXCFG+3, 0x00); |
| value16 = rtl_read_word(rtlpriv, REG_GPIO_MUXCFG+2) & 0xFF0F; |
| value8 = (u8) (value16&0x000F); |
| value16 |= ((value8<<4) | 0x0780); |
| rtl_write_word(rtlpriv, REG_GPIO_PIN_CTRL+2, value16); |
| /* 3. Disable LED0 & 1 */ |
| rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); |
| } |
| |
| static void _DisableAnalog(struct ieee80211_hw *hw, bool bWithoutHWSM) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u16 value16 = 0; |
| u8 value8 = 0; |
| |
| if (bWithoutHWSM) { |
| /***************************** |
| n. LDOA15_CTRL 0x20[7:0] = 0x04 disable A15 power |
| o. LDOV12D_CTRL 0x21[7:0] = 0x54 disable digital core power |
| r. When driver call disable, the ASIC will turn off remaining |
| clock automatically |
| ******************************/ |
| rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); |
| value8 = rtl_read_byte(rtlpriv, REG_LDOV12D_CTRL); |
| value8 &= (~LDV12_EN); |
| rtl_write_byte(rtlpriv, REG_LDOV12D_CTRL, value8); |
| } |
| |
| /***************************** |
| h. SPS0_CTRL 0x11[7:0] = 0x23 enter PFM mode |
| i. APS_FSMCO 0x04[15:0] = 0x4802 set USB suspend |
| ******************************/ |
| rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); |
| value16 |= (APDM_HOST | AFSM_HSUS | PFM_ALDN); |
| rtl_write_word(rtlpriv, REG_APS_FSMCO, (u16)value16); |
| rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0E); |
| } |
| |
| static void _CardDisableHWSM(struct ieee80211_hw *hw) |
| { |
| /* ==== RF Off Sequence ==== */ |
| _DisableRFAFEAndResetBB(hw); |
| /* ==== Reset digital sequence ====== */ |
| _ResetDigitalProcedure1(hw, false); |
| /* ==== Pull GPIO PIN to balance level and LED control ====== */ |
| _DisableGPIO(hw); |
| /* ==== Disable analog sequence === */ |
| _DisableAnalog(hw, false); |
| } |
| |
| static void _CardDisableWithoutHWSM(struct ieee80211_hw *hw) |
| { |
| /*==== RF Off Sequence ==== */ |
| _DisableRFAFEAndResetBB(hw); |
| /* ==== Reset digital sequence ====== */ |
| _ResetDigitalProcedure1(hw, true); |
| /* ==== Pull GPIO PIN to balance level and LED control ====== */ |
| _DisableGPIO(hw); |
| /* ==== Reset digital sequence ====== */ |
| _ResetDigitalProcedure2(hw); |
| /* ==== Disable analog sequence === */ |
| _DisableAnalog(hw, true); |
| } |
| |
| static void _rtl92cu_set_bcn_ctrl_reg(struct ieee80211_hw *hw, |
| u8 set_bits, u8 clear_bits) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| |
| rtlusb->reg_bcn_ctrl_val |= set_bits; |
| rtlusb->reg_bcn_ctrl_val &= ~clear_bits; |
| rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlusb->reg_bcn_ctrl_val); |
| } |
| |
| static void _rtl92cu_stop_tx_beacon(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| u8 tmp1byte = 0; |
| if (IS_NORMAL_CHIP(rtlhal->version)) { |
| tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, |
| tmp1byte & (~BIT(6))); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64); |
| tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); |
| tmp1byte &= ~(BIT(0)); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); |
| } else { |
| rtl_write_byte(rtlpriv, REG_TXPAUSE, |
| rtl_read_byte(rtlpriv, REG_TXPAUSE) | BIT(6)); |
| } |
| } |
| |
| static void _rtl92cu_resume_tx_beacon(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| u8 tmp1byte = 0; |
| |
| if (IS_NORMAL_CHIP(rtlhal->version)) { |
| tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, |
| tmp1byte | BIT(6)); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); |
| tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); |
| tmp1byte |= BIT(0); |
| rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); |
| } else { |
| rtl_write_byte(rtlpriv, REG_TXPAUSE, |
| rtl_read_byte(rtlpriv, REG_TXPAUSE) & (~BIT(6))); |
| } |
| } |
| |
| static void _rtl92cu_enable_bcn_sub_func(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| if (IS_NORMAL_CHIP(rtlhal->version)) |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(1)); |
| else |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| } |
| |
| static void _rtl92cu_disable_bcn_sub_func(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| if (IS_NORMAL_CHIP(rtlhal->version)) |
| _rtl92cu_set_bcn_ctrl_reg(hw, BIT(1), 0); |
| else |
| _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| } |
| |
| static int _rtl92cu_set_media_status(struct ieee80211_hw *hw, |
| enum nl80211_iftype type) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| u8 bt_msr = rtl_read_byte(rtlpriv, MSR); |
| enum led_ctl_mode ledaction = LED_CTL_NO_LINK; |
| |
| bt_msr &= 0xfc; |
| rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xFF); |
| if (type == NL80211_IFTYPE_UNSPECIFIED || type == |
| NL80211_IFTYPE_STATION) { |
| _rtl92cu_stop_tx_beacon(hw); |
| _rtl92cu_enable_bcn_sub_func(hw); |
| } else if (type == NL80211_IFTYPE_ADHOC || type == NL80211_IFTYPE_AP) { |
| _rtl92cu_resume_tx_beacon(hw); |
| _rtl92cu_disable_bcn_sub_func(hw); |
| } else { |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| "Set HW_VAR_MEDIA_STATUS:No such media status(%x)\n", |
| type); |
| } |
| switch (type) { |
| case NL80211_IFTYPE_UNSPECIFIED: |
| bt_msr |= MSR_NOLINK; |
| ledaction = LED_CTL_LINK; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to NO LINK!\n"); |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| bt_msr |= MSR_ADHOC; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to Ad Hoc!\n"); |
| break; |
| case NL80211_IFTYPE_STATION: |
| bt_msr |= MSR_INFRA; |
| ledaction = LED_CTL_LINK; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to STA!\n"); |
| break; |
| case NL80211_IFTYPE_AP: |
| bt_msr |= MSR_AP; |
| RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, |
| "Set Network type to AP!\n"); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "Network type %d not supported!\n", type); |
| goto error_out; |
| } |
| rtl_write_byte(rtlpriv, (MSR), bt_msr); |
| rtlpriv->cfg->ops->led_control(hw, ledaction); |
| if ((bt_msr & 0xfc) == MSR_AP) |
| rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); |
| else |
| rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); |
| return 0; |
| error_out: |
| return 1; |
| } |
| |
| void rtl92cu_card_disable(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| enum nl80211_iftype opmode; |
| |
| mac->link_state = MAC80211_NOLINK; |
| opmode = NL80211_IFTYPE_UNSPECIFIED; |
| _rtl92cu_set_media_status(hw, opmode); |
| rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); |
| if (rtlusb->disableHWSM) |
| _CardDisableHWSM(hw); |
| else |
| _CardDisableWithoutHWSM(hw); |
| } |
| |
| void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR); |
| |
| if (rtlpriv->psc.rfpwr_state != ERFON) |
| return; |
| |
| if (check_bssid) { |
| u8 tmp; |
| if (IS_NORMAL_CHIP(rtlhal->version)) { |
| reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); |
| tmp = BIT(4); |
| } else { |
| reg_rcr |= RCR_CBSSID; |
| tmp = BIT(4) | BIT(5); |
| } |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, |
| (u8 *) (®_rcr)); |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, tmp); |
| } else { |
| u8 tmp; |
| if (IS_NORMAL_CHIP(rtlhal->version)) { |
| reg_rcr &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN); |
| tmp = BIT(4); |
| } else { |
| reg_rcr &= ~RCR_CBSSID; |
| tmp = BIT(4) | BIT(5); |
| } |
| reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); |
| rtlpriv->cfg->ops->set_hw_reg(hw, |
| HW_VAR_RCR, (u8 *) (®_rcr)); |
| _rtl92cu_set_bcn_ctrl_reg(hw, tmp, 0); |
| } |
| } |
| |
| /*========================================================================== */ |
| |
| int rtl92cu_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| if (_rtl92cu_set_media_status(hw, type)) |
| return -EOPNOTSUPP; |
| |
| if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { |
| if (type != NL80211_IFTYPE_AP) |
| rtl92cu_set_check_bssid(hw, true); |
| } else { |
| rtl92cu_set_check_bssid(hw, false); |
| } |
| |
| return 0; |
| } |
| |
| static void _InitBeaconParameters(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_hal *rtlhal = rtl_hal(rtlpriv); |
| |
| rtl_write_word(rtlpriv, REG_BCN_CTRL, 0x1010); |
| |
| /* TODO: Remove these magic number */ |
| rtl_write_word(rtlpriv, REG_TBTT_PROHIBIT, 0x6404); |
| rtl_write_byte(rtlpriv, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME); |
| rtl_write_byte(rtlpriv, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); |
| /* Change beacon AIFS to the largest number |
| * beacause test chip does not contension before sending beacon. */ |
| if (IS_NORMAL_CHIP(rtlhal->version)) |
| rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660F); |
| else |
| rtl_write_word(rtlpriv, REG_BCNTCFG, 0x66FF); |
| } |
| |
| static void _beacon_function_enable(struct ieee80211_hw *hw, bool Enable, |
| bool Linked) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| _rtl92cu_set_bcn_ctrl_reg(hw, (BIT(4) | BIT(3) | BIT(1)), 0x00); |
| rtl_write_byte(rtlpriv, REG_RD_CTRL+1, 0x6F); |
| } |
| |
| void rtl92cu_set_beacon_related_registers(struct ieee80211_hw *hw) |
| { |
| |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u16 bcn_interval, atim_window; |
| u32 value32; |
| |
| bcn_interval = mac->beacon_interval; |
| atim_window = 2; /*FIX MERGE */ |
| rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); |
| rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); |
| _InitBeaconParameters(hw); |
| rtl_write_byte(rtlpriv, REG_SLOT, 0x09); |
| /* |
| * Force beacon frame transmission even after receiving beacon frame |
| * from other ad hoc STA |
| * |
| * |
| * Reset TSF Timer to zero, added by Roger. 2008.06.24 |
| */ |
| value32 = rtl_read_dword(rtlpriv, REG_TCR); |
| value32 &= ~TSFRST; |
| rtl_write_dword(rtlpriv, REG_TCR, value32); |
| value32 |= TSFRST; |
| rtl_write_dword(rtlpriv, REG_TCR, value32); |
| RT_TRACE(rtlpriv, COMP_INIT|COMP_BEACON, DBG_LOUD, |
| "SetBeaconRelatedRegisters8192CUsb(): Set TCR(%x)\n", |
| value32); |
| /* TODO: Modify later (Find the right parameters) |
| * NOTE: Fix test chip's bug (about contention windows's randomness) */ |
| if ((mac->opmode == NL80211_IFTYPE_ADHOC) || |
| (mac->opmode == NL80211_IFTYPE_AP)) { |
| rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x50); |
| rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x50); |
| } |
| _beacon_function_enable(hw, true, true); |
| } |
| |
| void rtl92cu_set_beacon_interval(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u16 bcn_interval = mac->beacon_interval; |
| |
| RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG, "beacon_interval:%d\n", |
| bcn_interval); |
| rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); |
| } |
| |
| void rtl92cu_update_interrupt_mask(struct ieee80211_hw *hw, |
| u32 add_msr, u32 rm_msr) |
| { |
| } |
| |
| void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| |
| switch (variable) { |
| case HW_VAR_RCR: |
| *((u32 *)(val)) = mac->rx_conf; |
| break; |
| case HW_VAR_RF_STATE: |
| *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; |
| break; |
| case HW_VAR_FWLPS_RF_ON:{ |
| enum rf_pwrstate rfState; |
| u32 val_rcr; |
| |
| rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, |
| (u8 *)(&rfState)); |
| if (rfState == ERFOFF) { |
| *((bool *) (val)) = true; |
| } else { |
| val_rcr = rtl_read_dword(rtlpriv, REG_RCR); |
| val_rcr &= 0x00070000; |
| if (val_rcr) |
| *((bool *) (val)) = false; |
| else |
| *((bool *) (val)) = true; |
| } |
| break; |
| } |
| case HW_VAR_FW_PSMODE_STATUS: |
| *((bool *) (val)) = ppsc->fw_current_inpsmode; |
| break; |
| case HW_VAR_CORRECT_TSF:{ |
| u64 tsf; |
| u32 *ptsf_low = (u32 *)&tsf; |
| u32 *ptsf_high = ((u32 *)&tsf) + 1; |
| |
| *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4)); |
| *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR); |
| *((u64 *)(val)) = tsf; |
| break; |
| } |
| case HW_VAR_MGT_FILTER: |
| *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP0); |
| break; |
| case HW_VAR_CTRL_FILTER: |
| *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP1); |
| break; |
| case HW_VAR_DATA_FILTER: |
| *((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP2); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "switch case not processed\n"); |
| break; |
| } |
| } |
| |
| void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); |
| enum wireless_mode wirelessmode = mac->mode; |
| u8 idx = 0; |
| |
| switch (variable) { |
| case HW_VAR_ETHER_ADDR:{ |
| for (idx = 0; idx < ETH_ALEN; idx++) { |
| rtl_write_byte(rtlpriv, (REG_MACID + idx), |
| val[idx]); |
| } |
| break; |
| } |
| case HW_VAR_BASIC_RATE:{ |
| u16 rate_cfg = ((u16 *) val)[0]; |
| u8 rate_index = 0; |
| |
| rate_cfg &= 0x15f; |
| /* TODO */ |
| /* if (mac->current_network.vender == HT_IOT_PEER_CISCO |
| * && ((rate_cfg & 0x150) == 0)) { |
| * rate_cfg |= 0x010; |
| * } */ |
| rate_cfg |= 0x01; |
| rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff); |
| rtl_write_byte(rtlpriv, REG_RRSR + 1, |
| (rate_cfg >> 8) & 0xff); |
| while (rate_cfg > 0x1) { |
| rate_cfg >>= 1; |
| rate_index++; |
| } |
| rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, |
| rate_index); |
| break; |
| } |
| case HW_VAR_BSSID:{ |
| for (idx = 0; idx < ETH_ALEN; idx++) { |
| rtl_write_byte(rtlpriv, (REG_BSSID + idx), |
| val[idx]); |
| } |
| break; |
| } |
| case HW_VAR_SIFS:{ |
| rtl_write_byte(rtlpriv, REG_SIFS_CCK + 1, val[0]); |
| rtl_write_byte(rtlpriv, REG_SIFS_OFDM + 1, val[1]); |
| rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]); |
| rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]); |
| rtl_write_byte(rtlpriv, REG_R2T_SIFS+1, val[0]); |
| rtl_write_byte(rtlpriv, REG_T2T_SIFS+1, val[0]); |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, "HW_VAR_SIFS\n"); |
| break; |
| } |
| case HW_VAR_SLOT_TIME:{ |
| u8 e_aci; |
| u8 QOS_MODE = 1; |
| |
| rtl_write_byte(rtlpriv, REG_SLOT, val[0]); |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, |
| "HW_VAR_SLOT_TIME %x\n", val[0]); |
| if (QOS_MODE) { |
| for (e_aci = 0; e_aci < AC_MAX; e_aci++) |
| rtlpriv->cfg->ops->set_hw_reg(hw, |
| HW_VAR_AC_PARAM, |
| &e_aci); |
| } else { |
| u8 sifstime = 0; |
| u8 u1bAIFS; |
| |
| if (IS_WIRELESS_MODE_A(wirelessmode) || |
| IS_WIRELESS_MODE_N_24G(wirelessmode) || |
| IS_WIRELESS_MODE_N_5G(wirelessmode)) |
| sifstime = 16; |
| else |
| sifstime = 10; |
| u1bAIFS = sifstime + (2 * val[0]); |
| rtl_write_byte(rtlpriv, REG_EDCA_VO_PARAM, |
| u1bAIFS); |
| rtl_write_byte(rtlpriv, REG_EDCA_VI_PARAM, |
| u1bAIFS); |
| rtl_write_byte(rtlpriv, REG_EDCA_BE_PARAM, |
| u1bAIFS); |
| rtl_write_byte(rtlpriv, REG_EDCA_BK_PARAM, |
| u1bAIFS); |
| } |
| break; |
| } |
| case HW_VAR_ACK_PREAMBLE:{ |
| u8 reg_tmp; |
| u8 short_preamble = (bool)*val; |
| reg_tmp = 0; |
| if (short_preamble) |
| reg_tmp |= 0x80; |
| rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp); |
| break; |
| } |
| case HW_VAR_AMPDU_MIN_SPACE:{ |
| u8 min_spacing_to_set; |
| u8 sec_min_space; |
| |
| min_spacing_to_set = *val; |
| if (min_spacing_to_set <= 7) { |
| switch (rtlpriv->sec.pairwise_enc_algorithm) { |
| case NO_ENCRYPTION: |
| case AESCCMP_ENCRYPTION: |
| sec_min_space = 0; |
| break; |
| case WEP40_ENCRYPTION: |
| case WEP104_ENCRYPTION: |
| case TKIP_ENCRYPTION: |
| sec_min_space = 6; |
| break; |
| default: |
| sec_min_space = 7; |
| break; |
| } |
| if (min_spacing_to_set < sec_min_space) |
| min_spacing_to_set = sec_min_space; |
| mac->min_space_cfg = ((mac->min_space_cfg & |
| 0xf8) | |
| min_spacing_to_set); |
| *val = min_spacing_to_set; |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, |
| "Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", |
| mac->min_space_cfg); |
| rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, |
| mac->min_space_cfg); |
| } |
| break; |
| } |
| case HW_VAR_SHORTGI_DENSITY:{ |
| u8 density_to_set; |
| |
| density_to_set = *val; |
| density_to_set &= 0x1f; |
| mac->min_space_cfg &= 0x07; |
| mac->min_space_cfg |= (density_to_set << 3); |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, |
| "Set HW_VAR_SHORTGI_DENSITY: %#x\n", |
| mac->min_space_cfg); |
| rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, |
| mac->min_space_cfg); |
| break; |
| } |
| case HW_VAR_AMPDU_FACTOR:{ |
| u8 regtoset_normal[4] = {0x41, 0xa8, 0x72, 0xb9}; |
| u8 factor_toset; |
| u8 *p_regtoset = NULL; |
| u8 index = 0; |
| |
| p_regtoset = regtoset_normal; |
| factor_toset = *val; |
| if (factor_toset <= 3) { |
| factor_toset = (1 << (factor_toset + 2)); |
| if (factor_toset > 0xf) |
| factor_toset = 0xf; |
| for (index = 0; index < 4; index++) { |
| if ((p_regtoset[index] & 0xf0) > |
| (factor_toset << 4)) |
| p_regtoset[index] = |
| (p_regtoset[index] & 0x0f) |
| | (factor_toset << 4); |
| if ((p_regtoset[index] & 0x0f) > |
| factor_toset) |
| p_regtoset[index] = |
| (p_regtoset[index] & 0xf0) |
| | (factor_toset); |
| rtl_write_byte(rtlpriv, |
| (REG_AGGLEN_LMT + index), |
| p_regtoset[index]); |
| } |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, |
| "Set HW_VAR_AMPDU_FACTOR: %#x\n", |
| factor_toset); |
| } |
| break; |
| } |
| case HW_VAR_AC_PARAM:{ |
| u8 e_aci = *val; |
| u32 u4b_ac_param; |
| u16 cw_min = le16_to_cpu(mac->ac[e_aci].cw_min); |
| u16 cw_max = le16_to_cpu(mac->ac[e_aci].cw_max); |
| u16 tx_op = le16_to_cpu(mac->ac[e_aci].tx_op); |
| |
| u4b_ac_param = (u32) mac->ac[e_aci].aifs; |
| u4b_ac_param |= (u32) ((cw_min & 0xF) << |
| AC_PARAM_ECW_MIN_OFFSET); |
| u4b_ac_param |= (u32) ((cw_max & 0xF) << |
| AC_PARAM_ECW_MAX_OFFSET); |
| u4b_ac_param |= (u32) tx_op << AC_PARAM_TXOP_OFFSET; |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, |
| "queue:%x, ac_param:%x\n", |
| e_aci, u4b_ac_param); |
| switch (e_aci) { |
| case AC1_BK: |
| rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, |
| u4b_ac_param); |
| break; |
| case AC0_BE: |
| rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, |
| u4b_ac_param); |
| break; |
| case AC2_VI: |
| rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, |
| u4b_ac_param); |
| break; |
| case AC3_VO: |
| rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, |
| u4b_ac_param); |
| break; |
| default: |
| RT_ASSERT(false, |
| "SetHwReg8185(): invalid aci: %d !\n", |
| e_aci); |
| break; |
| } |
| if (rtlusb->acm_method != eAcmWay2_SW) |
| rtlpriv->cfg->ops->set_hw_reg(hw, |
| HW_VAR_ACM_CTRL, &e_aci); |
| break; |
| } |
| case HW_VAR_ACM_CTRL:{ |
| u8 e_aci = *val; |
| union aci_aifsn *p_aci_aifsn = (union aci_aifsn *) |
| (&(mac->ac[0].aifs)); |
| u8 acm = p_aci_aifsn->f.acm; |
| u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); |
| |
| acm_ctrl = |
| acm_ctrl | ((rtlusb->acm_method == 2) ? 0x0 : 0x1); |
| if (acm) { |
| switch (e_aci) { |
| case AC0_BE: |
| acm_ctrl |= AcmHw_BeqEn; |
| break; |
| case AC2_VI: |
| acm_ctrl |= AcmHw_ViqEn; |
| break; |
| case AC3_VO: |
| acm_ctrl |= AcmHw_VoqEn; |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, |
| "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n", |
| acm); |
| break; |
| } |
| } else { |
| switch (e_aci) { |
| case AC0_BE: |
| acm_ctrl &= (~AcmHw_BeqEn); |
| break; |
| case AC2_VI: |
| acm_ctrl &= (~AcmHw_ViqEn); |
| break; |
| case AC3_VO: |
| acm_ctrl &= (~AcmHw_BeqEn); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "switch case not processed\n"); |
| break; |
| } |
| } |
| RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, |
| "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n", |
| acm_ctrl); |
| rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); |
| break; |
| } |
| case HW_VAR_RCR:{ |
| rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); |
| mac->rx_conf = ((u32 *) (val))[0]; |
| RT_TRACE(rtlpriv, COMP_RECV, DBG_DMESG, |
| "### Set RCR(0x%08x) ###\n", mac->rx_conf); |
| break; |
| } |
| case HW_VAR_RETRY_LIMIT:{ |
| u8 retry_limit = val[0]; |
| |
| rtl_write_word(rtlpriv, REG_RL, |
| retry_limit << RETRY_LIMIT_SHORT_SHIFT | |
| retry_limit << RETRY_LIMIT_LONG_SHIFT); |
| RT_TRACE(rtlpriv, COMP_MLME, DBG_DMESG, |
| "Set HW_VAR_RETRY_LIMIT(0x%08x)\n", |
| retry_limit); |
| break; |
| } |
| case HW_VAR_DUAL_TSF_RST: |
| rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1))); |
| break; |
| case HW_VAR_EFUSE_BYTES: |
| rtlefuse->efuse_usedbytes = *((u16 *) val); |
| break; |
| case HW_VAR_EFUSE_USAGE: |
| rtlefuse->efuse_usedpercentage = *val; |
| break; |
| case HW_VAR_IO_CMD: |
| rtl92c_phy_set_io_cmd(hw, (*(enum io_type *)val)); |
| break; |
| case HW_VAR_WPA_CONFIG: |
| rtl_write_byte(rtlpriv, REG_SECCFG, *val); |
| break; |
| case HW_VAR_SET_RPWM:{ |
| u8 rpwm_val = rtl_read_byte(rtlpriv, REG_USB_HRPWM); |
| |
| if (rpwm_val & BIT(7)) |
| rtl_write_byte(rtlpriv, REG_USB_HRPWM, *val); |
| else |
| rtl_write_byte(rtlpriv, REG_USB_HRPWM, |
| *val | BIT(7)); |
| break; |
| } |
| case HW_VAR_H2C_FW_PWRMODE:{ |
| u8 psmode = *val; |
| |
| if ((psmode != FW_PS_ACTIVE_MODE) && |
| (!IS_92C_SERIAL(rtlhal->version))) |
| rtl92c_dm_rf_saving(hw, true); |
| rtl92c_set_fw_pwrmode_cmd(hw, (*val)); |
| break; |
| } |
| case HW_VAR_FW_PSMODE_STATUS: |
| ppsc->fw_current_inpsmode = *((bool *) val); |
| break; |
| case HW_VAR_H2C_FW_JOINBSSRPT:{ |
| u8 mstatus = *val; |
| u8 tmp_reg422; |
| bool recover = false; |
| |
| if (mstatus == RT_MEDIA_CONNECT) { |
| rtlpriv->cfg->ops->set_hw_reg(hw, |
| HW_VAR_AID, NULL); |
| rtl_write_byte(rtlpriv, REG_CR + 1, 0x03); |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| _rtl92cu_set_bcn_ctrl_reg(hw, BIT(4), 0); |
| tmp_reg422 = rtl_read_byte(rtlpriv, |
| REG_FWHW_TXQ_CTRL + 2); |
| if (tmp_reg422 & BIT(6)) |
| recover = true; |
| rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, |
| tmp_reg422 & (~BIT(6))); |
| rtl92c_set_fw_rsvdpagepkt(hw, 0); |
| _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); |
| if (recover) |
| rtl_write_byte(rtlpriv, |
| REG_FWHW_TXQ_CTRL + 2, |
| tmp_reg422 | BIT(6)); |
| rtl_write_byte(rtlpriv, REG_CR + 1, 0x02); |
| } |
| rtl92c_set_fw_joinbss_report_cmd(hw, (*val)); |
| break; |
| } |
| case HW_VAR_AID:{ |
| u16 u2btmp; |
| |
| u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT); |
| u2btmp &= 0xC000; |
| rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, |
| (u2btmp | mac->assoc_id)); |
| break; |
| } |
| case HW_VAR_CORRECT_TSF:{ |
| u8 btype_ibss = val[0]; |
| |
| if (btype_ibss) |
| _rtl92cu_stop_tx_beacon(hw); |
| _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(3)); |
| rtl_write_dword(rtlpriv, REG_TSFTR, (u32)(mac->tsf & |
| 0xffffffff)); |
| rtl_write_dword(rtlpriv, REG_TSFTR + 4, |
| (u32)((mac->tsf >> 32) & 0xffffffff)); |
| _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0); |
| if (btype_ibss) |
| _rtl92cu_resume_tx_beacon(hw); |
| break; |
| } |
| case HW_VAR_MGT_FILTER: |
| rtl_write_word(rtlpriv, REG_RXFLTMAP0, *(u16 *)val); |
| break; |
| case HW_VAR_CTRL_FILTER: |
| rtl_write_word(rtlpriv, REG_RXFLTMAP1, *(u16 *)val); |
| break; |
| case HW_VAR_DATA_FILTER: |
| rtl_write_word(rtlpriv, REG_RXFLTMAP2, *(u16 *)val); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| "switch case not processed\n"); |
| break; |
| } |
| } |
| |
| static void rtl92cu_update_hal_rate_table(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| u32 ratr_value; |
| u8 ratr_index = 0; |
| u8 nmode = mac->ht_enable; |
| u8 mimo_ps = IEEE80211_SMPS_OFF; |
| u16 shortgi_rate; |
| u32 tmp_ratr_value; |
| u8 curtxbw_40mhz = mac->bw_40; |
| u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? |
| 1 : 0; |
| u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? |
| 1 : 0; |
| enum wireless_mode wirelessmode = mac->mode; |
| |
| if (rtlhal->current_bandtype == BAND_ON_5G) |
| ratr_value = sta->supp_rates[1] << 4; |
| else |
| ratr_value = sta->supp_rates[0]; |
| if (mac->opmode == NL80211_IFTYPE_ADHOC) |
| ratr_value = 0xfff; |
| |
| ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | |
| sta->ht_cap.mcs.rx_mask[0] << 12); |
| switch (wirelessmode) { |
| case WIRELESS_MODE_B: |
| if (ratr_value & 0x0000000c) |
| ratr_value &= 0x0000000d; |
| else |
| ratr_value &= 0x0000000f; |
| break; |
| case WIRELESS_MODE_G: |
| ratr_value &= 0x00000FF5; |
| break; |
| case WIRELESS_MODE_N_24G: |
| case WIRELESS_MODE_N_5G: |
| nmode = 1; |
| if (mimo_ps == IEEE80211_SMPS_STATIC) { |
| ratr_value &= 0x0007F005; |
| } else { |
| u32 ratr_mask; |
| |
| if (get_rf_type(rtlphy) == RF_1T2R || |
| get_rf_type(rtlphy) == RF_1T1R) |
| ratr_mask = 0x000ff005; |
| else |
| ratr_mask = 0x0f0ff005; |
| |
| ratr_value &= ratr_mask; |
| } |
| break; |
| default: |
| if (rtlphy->rf_type == RF_1T2R) |
| ratr_value &= 0x000ff0ff; |
| else |
| ratr_value &= 0x0f0ff0ff; |
| |
| break; |
| } |
| |
| ratr_value &= 0x0FFFFFFF; |
| |
| if (nmode && ((curtxbw_40mhz && |
| curshortgi_40mhz) || (!curtxbw_40mhz && |
| curshortgi_20mhz))) { |
| |
| ratr_value |= 0x10000000; |
| tmp_ratr_value = (ratr_value >> 12); |
| |
| for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { |
| if ((1 << shortgi_rate) & tmp_ratr_value) |
| break; |
| } |
| |
| shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | |
| (shortgi_rate << 4) | (shortgi_rate); |
| } |
| |
| rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); |
| |
| RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, "%x\n", |
| rtl_read_dword(rtlpriv, REG_ARFR0)); |
| } |
| |
| static void rtl92cu_update_hal_rate_mask(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, |
| u8 rssi_level) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_phy *rtlphy = &(rtlpriv->phy); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| struct rtl_sta_info *sta_entry = NULL; |
| u32 ratr_bitmap; |
| u8 ratr_index; |
| u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; |
| u8 curshortgi_40mhz = curtxbw_40mhz && |
| (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? |
| 1 : 0; |
| u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? |
| 1 : 0; |
| enum wireless_mode wirelessmode = 0; |
| bool shortgi = false; |
| u8 rate_mask[5]; |
| u8 macid = 0; |
| u8 mimo_ps = IEEE80211_SMPS_OFF; |
| |
| sta_entry = (struct rtl_sta_info *) sta->drv_priv; |
| wirelessmode = sta_entry->wireless_mode; |
| if (mac->opmode == NL80211_IFTYPE_STATION || |
| mac->opmode == NL80211_IFTYPE_MESH_POINT) |
| curtxbw_40mhz = mac->bw_40; |
| else if (mac->opmode == NL80211_IFTYPE_AP || |
| mac->opmode == NL80211_IFTYPE_ADHOC) |
| macid = sta->aid + 1; |
| |
| if (rtlhal->current_bandtype == BAND_ON_5G) |
| ratr_bitmap = sta->supp_rates[1] << 4; |
| else |
| ratr_bitmap = sta->supp_rates[0]; |
| if (mac->opmode == NL80211_IFTYPE_ADHOC) |
| ratr_bitmap = 0xfff; |
| ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | |
| sta->ht_cap.mcs.rx_mask[0] << 12); |
| switch (wirelessmode) { |
| case WIRELESS_MODE_B: |
| ratr_index = RATR_INX_WIRELESS_B; |
| if (ratr_bitmap & 0x0000000c) |
| ratr_bitmap &= 0x0000000d; |
| else |
| ratr_bitmap &= 0x0000000f; |
| break; |
| case WIRELESS_MODE_G: |
| ratr_index = RATR_INX_WIRELESS_GB; |
| |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x00000f00; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x00000ff0; |
| else |
| ratr_bitmap &= 0x00000ff5; |
| break; |
| case WIRELESS_MODE_A: |
| ratr_index = RATR_INX_WIRELESS_A; |
| ratr_bitmap &= 0x00000ff0; |
| break; |
| case WIRELESS_MODE_N_24G: |
| case WIRELESS_MODE_N_5G: |
| ratr_index = RATR_INX_WIRELESS_NGB; |
| |
| if (mimo_ps == IEEE80211_SMPS_STATIC) { |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x00070000; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x0007f000; |
| else |
| ratr_bitmap &= 0x0007f005; |
| } else { |
| if (rtlphy->rf_type == RF_1T2R || |
| rtlphy->rf_type == RF_1T1R) { |
| if (curtxbw_40mhz) { |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x000f0000; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x000ff000; |
| else |
| ratr_bitmap &= 0x000ff015; |
| } else { |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x000f0000; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x000ff000; |
| else |
| ratr_bitmap &= 0x000ff005; |
| } |
| } else { |
| if (curtxbw_40mhz) { |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x0f0f0000; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x0f0ff000; |
| else |
| ratr_bitmap &= 0x0f0ff015; |
| } else { |
| if (rssi_level == 1) |
| ratr_bitmap &= 0x0f0f0000; |
| else if (rssi_level == 2) |
| ratr_bitmap &= 0x0f0ff000; |
| else |
| ratr_bitmap &= 0x0f0ff005; |
| } |
| } |
| } |
| |
| if ((curtxbw_40mhz && curshortgi_40mhz) || |
| (!curtxbw_40mhz && curshortgi_20mhz)) { |
| |
| if (macid == 0) |
| shortgi = true; |
| else if (macid == 1) |
| shortgi = false; |
| } |
| break; |
| default: |
| ratr_index = RATR_INX_WIRELESS_NGB; |
| |
| if (rtlphy->rf_type == RF_1T2R) |
| ratr_bitmap &= 0x000ff0ff; |
| else |
| ratr_bitmap &= 0x0f0ff0ff; |
| break; |
| } |
| sta_entry->ratr_index = ratr_index; |
| |
| RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, |
| "ratr_bitmap :%x\n", ratr_bitmap); |
| *(u32 *)&rate_mask = (ratr_bitmap & 0x0fffffff) | |
| (ratr_index << 28); |
| rate_mask[4] = macid | (shortgi ? 0x20 : 0x00) | 0x80; |
| RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, |
| "Rate_index:%x, ratr_val:%x, %5phC\n", |
| ratr_index, ratr_bitmap, rate_mask); |
| memcpy(rtlpriv->rate_mask, rate_mask, 5); |
| /* rtl92c_fill_h2c_cmd() does USB I/O and will result in a |
| * "scheduled while atomic" if called directly */ |
| schedule_work(&rtlpriv->works.fill_h2c_cmd); |
| |
| if (macid != 0) |
| sta_entry->ratr_index = ratr_index; |
| } |
| |
| void rtl92cu_update_hal_rate_tbl(struct ieee80211_hw *hw, |
| struct ieee80211_sta *sta, |
| u8 rssi_level) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| if (rtlpriv->dm.useramask) |
| rtl92cu_update_hal_rate_mask(hw, sta, rssi_level); |
| else |
| rtl92cu_update_hal_rate_table(hw, sta); |
| } |
| |
| void rtl92cu_update_channel_access_setting(struct ieee80211_hw *hw) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); |
| u16 sifs_timer; |
| |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, |
| &mac->slot_time); |
| if (!mac->ht_enable) |
| sifs_timer = 0x0a0a; |
| else |
| sifs_timer = 0x0e0e; |
| rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); |
| } |
| |
| bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); |
| enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate; |
| u8 u1tmp = 0; |
| bool actuallyset = false; |
| unsigned long flag = 0; |
| /* to do - usb autosuspend */ |
| u8 usb_autosuspend = 0; |
| |
| if (ppsc->swrf_processing) |
| return false; |
| spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); |
| if (ppsc->rfchange_inprogress) { |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); |
| return false; |
| } else { |
| ppsc->rfchange_inprogress = true; |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); |
| } |
| cur_rfstate = ppsc->rfpwr_state; |
| if (usb_autosuspend) { |
| /* to do................... */ |
| } else { |
| if (ppsc->pwrdown_mode) { |
| u1tmp = rtl_read_byte(rtlpriv, REG_HSISR); |
| e_rfpowerstate_toset = (u1tmp & BIT(7)) ? |
| ERFOFF : ERFON; |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, |
| "pwrdown, 0x5c(BIT7)=%02x\n", u1tmp); |
| } else { |
| rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, |
| rtl_read_byte(rtlpriv, |
| REG_MAC_PINMUX_CFG) & ~(BIT(3))); |
| u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL); |
| e_rfpowerstate_toset = (u1tmp & BIT(3)) ? |
| ERFON : ERFOFF; |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, |
| "GPIO_IN=%02x\n", u1tmp); |
| } |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, "N-SS RF =%x\n", |
| e_rfpowerstate_toset); |
| } |
| if ((ppsc->hwradiooff) && (e_rfpowerstate_toset == ERFON)) { |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, |
| "GPIOChangeRF - HW Radio ON, RF ON\n"); |
| ppsc->hwradiooff = false; |
| actuallyset = true; |
| } else if ((!ppsc->hwradiooff) && (e_rfpowerstate_toset == |
| ERFOFF)) { |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, |
| "GPIOChangeRF - HW Radio OFF\n"); |
| ppsc->hwradiooff = true; |
| actuallyset = true; |
| } else { |
| RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, |
| "pHalData->bHwRadioOff and eRfPowerStateToSet do not match: pHalData->bHwRadioOff %x, eRfPowerStateToSet %x\n", |
| ppsc->hwradiooff, e_rfpowerstate_toset); |
| } |
| if (actuallyset) { |
| ppsc->hwradiooff = true; |
| if (e_rfpowerstate_toset == ERFON) { |
| if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) && |
| RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM)) |
| RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM); |
| else if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3) |
| && RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3)) |
| RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3); |
| } |
| spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); |
| ppsc->rfchange_inprogress = false; |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); |
| /* For power down module, we need to enable register block |
| * contrl reg at 0x1c. Then enable power down control bit |
| * of register 0x04 BIT4 and BIT15 as 1. |
| */ |
| if (ppsc->pwrdown_mode && e_rfpowerstate_toset == ERFOFF) { |
| /* Enable register area 0x0-0xc. */ |
| rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0); |
| if (IS_HARDWARE_TYPE_8723U(rtlhal)) { |
| /* |
| * We should configure HW PDn source for WiFi |
| * ONLY, and then our HW will be set in |
| * power-down mode if PDn source from all |
| * functions are configured. |
| */ |
| u1tmp = rtl_read_byte(rtlpriv, |
| REG_MULTI_FUNC_CTRL); |
| rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, |
| (u1tmp|WL_HWPDN_EN)); |
| } else { |
| rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x8812); |
| } |
| } |
| if (e_rfpowerstate_toset == ERFOFF) { |
| if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM); |
| else if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3) |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3); |
| } |
| } else if (e_rfpowerstate_toset == ERFOFF || cur_rfstate == ERFOFF) { |
| /* Enter D3 or ASPM after GPIO had been done. */ |
| if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM); |
| else if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_PCI_D3) |
| RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_PCI_D3); |
| spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); |
| ppsc->rfchange_inprogress = false; |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); |
| } else { |
| spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); |
| ppsc->rfchange_inprogress = false; |
| spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); |
| } |
| *valid = 1; |
| return !ppsc->hwradiooff; |
| } |