ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset
Using a single definition for the physical and virtual address register for all
variants boards clps711x. This patch also includes the use of a single function
clps_read/write in some units.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h
index 4447722..78e2856 100644
--- a/arch/arm/include/asm/hardware/clps7111.h
+++ b/arch/arm/include/asm/hardware/clps7111.h
@@ -23,16 +23,7 @@
#ifndef __ASM_HARDWARE_CLPS7111_H
#define __ASM_HARDWARE_CLPS7111_H
-#define CLPS7111_PHYS_BASE (0x80000000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off))
-#define clps_readw(off) __raw_readw(CLPS7111_BASE + (off))
-#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writew(val,off) __raw_writew(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off))
-#endif
+#define CLPS711X_PHYS_BASE (0x80000000)
#define PADR (0x0000)
#define PBDR (0x0001)
diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
index 654d5f6..4b3f86b 100644
--- a/arch/arm/include/asm/hardware/ep7211.h
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -23,15 +23,6 @@
#ifndef __ASM_HARDWARE_EP7211_H
#define __ASM_HARDWARE_EP7211_H
-#include <asm/hardware/clps7111.h>
-
-/*
- * define EP7211_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7211_PHYS_BASE (0x80000000)
-
/*
* XXX miket@bluemug.com: need to introduce EP7211 registers (those not
* present in 7212) here.
diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
index 3b43bbe..aad07f7 100644
--- a/arch/arm/include/asm/hardware/ep7212.h
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -24,18 +24,6 @@
#define __ASM_HARDWARE_EP7212_H
/*
- * define EP7212_BASE to be the base address of the region
- * you want to access.
- */
-
-#define EP7212_PHYS_BASE (0x80000000)
-
-#ifndef __ASSEMBLY__
-#define ep_readl(off) __raw_readl(EP7212_BASE + (off))
-#define ep_writel(val,off) __raw_writel(val, EP7212_BASE + (off))
-#endif
-
-/*
* These registers are specific to the EP7212 only
*/
#define DAIR 0x2000
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index 3c5b5bb..b6dfd2f 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -36,7 +36,6 @@
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/clps7111.h>
#include <asm/system_misc.h>
/*
@@ -44,8 +43,8 @@
*/
static struct map_desc clps711x_io_desc[] __initdata = {
{
- .virtual = CLPS7111_VIRT_BASE,
- .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .virtual = (unsigned long)CLPS711X_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE),
.length = SZ_1M,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index b802e8a..118b3d9 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -12,7 +12,6 @@
*/
#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
.macro addruart, rp, rv, tmp
#ifndef CONFIG_DEBUG_CLPS711X_UART2
@@ -20,8 +19,8 @@
#else
mov \rp, #0x1000 @ UART2
#endif
- orr \rv, \rp, #CLPS7111_VIRT_BASE
- orr \rp, \rp, #CLPS7111_PHYS_BASE
+ orr \rv, \rp, #CLPS711X_VIRT_BASE
+ orr \rp, \rp, #CLPS711X_PHYS_BASE
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
index 125af59..56e5c2c 100644
--- a/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -8,7 +8,6 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
.macro get_irqnr_preamble, base, tmp
.endm
@@ -18,7 +17,7 @@
#endif
.macro get_irqnr_and_base, irqnr, stat, base, mask
- mov \base, #CLPS7111_BASE
+ mov \base, #CLPS711X_VIRT_BASE
ldr \stat, [\base, #INTSR1]
ldr \mask, [\base, #INTMR1]
mov \irqnr, #4
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index d0b7d87..1026ac9 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -19,12 +19,21 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+#include <asm/hardware/clps7111.h>
-#define CLPS7111_VIRT_BASE 0xff000000
-#define CLPS7111_BASE CLPS7111_VIRT_BASE
+#define CLPS711X_VIRT_BASE IOMEM(0xff000000)
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off))
+#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off))
+#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off))
+#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off))
+#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off))
+#endif
/*
* The physical addresses that the external chip select signals map to is
@@ -54,14 +63,10 @@
#if defined (CONFIG_ARCH_EP7211)
-#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE
-#define EP7211_BASE CLPS7111_VIRT_BASE
#include <asm/hardware/ep7211.h>
#elif defined (CONFIG_ARCH_EP7212)
-#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE
-#define EP7212_BASE CLPS7111_VIRT_BASE
#include <asm/hardware/ep7212.h>
#endif
@@ -71,10 +76,6 @@
#if defined (CONFIG_ARCH_AUTCPU12)
-#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
-#define CS89712_BASE CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
#include <asm/hardware/ep7212.h>
#include <asm/hardware/cs89712.h>
@@ -83,15 +84,9 @@
#if defined (CONFIG_ARCH_CDB89712)
-#include <asm/hardware/clps7111.h>
#include <asm/hardware/ep7212.h>
#include <asm/hardware/cs89712.h>
-/* static cdb89712_map_io() areas */
-#define REGISTER_START 0x80000000
-#define REGISTER_SIZE 0x4000
-#define REGISTER_BASE 0xff000000
-
#define ETHER_START 0x20000000
#define ETHER_SIZE 0x1000
#define ETHER_BASE 0xfe000000
@@ -154,13 +149,8 @@
#if defined (CONFIG_ARCH_CEIVA)
-#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE
-#define CEIVA_BASE CLPS7111_VIRT_BASE
-
-#include <asm/hardware/clps7111.h>
#include <asm/hardware/ep7212.h>
-
/*
* The two flash banks are wired to chip selects 0 and 1. This is the mapping
* for them.
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
index 61fef91..5f65865 100644
--- a/arch/arm/mach-clps711x/include/mach/time.h
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -18,7 +18,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/leds.h>
-#include <asm/hardware/clps7111.h>
+#include <mach/hardware.h>
extern void clps711x_setup_timer(void);
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 35ed731..263f839 100644
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -17,15 +17,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
-#undef CLPS7111_BASE
-#define CLPS7111_BASE CLPS7111_PHYS_BASE
-
-#define __raw_readl(p) (*(unsigned long *)(p))
-#define __raw_writel(v,p) (*(unsigned long *)(p) = (v))
-
#ifdef CONFIG_DEBUG_CLPS711X_UART2
#define SYSFLGx SYSFLG2
#define UARTDRx UARTDR2
@@ -34,19 +27,25 @@
#define UARTDRx UARTDR1
#endif
+#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x)))
+
/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
* This does not append a newline
*/
static inline void putc(int c)
{
- while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+ while (phys_reg(SYSFLGx) & SYSFLG_UTXFF)
barrier();
- clps_writel(c, UARTDRx);
+ phys_reg(UARTDRx) = c;
}
static inline void flush(void)
{
- while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+ while (phys_reg(SYSFLGx) & SYSFLG_UBUSY)
barrier();
}
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index dd9a6cd..bbc449f 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -27,9 +27,6 @@
#include <asm/leds.h>
#include <asm/mach-types.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/hardware/ep7212.h>
-
static void p720t_leds_event(led_event_t ledevt)
{
unsigned long flags;
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 2e42ec2..04769a4 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -102,10 +102,10 @@
void __iomem *addr;
unsigned char bits;
- addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
- bits = (ctrl & NAND_CLE) << 4;
+ bits = clps_readb(AUTCPU12_SMC_PORT_OFFSET) & ~0x30;
+ bits |= (ctrl & NAND_CLE) << 4;
bits |= (ctrl & NAND_ALE) << 2;
- writeb((readb(addr) & ~0x30) | bits, addr);
+ clps_writeb(bits, AUTCPU12_SMC_PORT_OFFSET);
addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET;
writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr);
@@ -120,9 +120,7 @@
*/
int autcpu12_device_ready(struct mtd_info *mtd)
{
- void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET;
-
- return readb(addr) & AUTCPU12_SMC_RDY;
+ return clps_readb(AUTCPU12_SMC_PORT_OFFSET) & AUTCPU12_SMC_RDY;
}
/*
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 11e4878..9bf5ce5 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -24,7 +24,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <mach/hardware.h> /* for CLPS7111_VIRT_BASE */
+#include <mach/hardware.h>
#include <asm/sizes.h>
#include <mach/h1900-gpio.h>
#include <mach/ipaq.h>
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 836fe273..d0f719f 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -40,7 +40,6 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <asm/hardware/clps7111.h>
#define UART_NR 2
diff --git a/drivers/video/clps711xfb.c b/drivers/video/clps711xfb.c
index 99b354b..f994c8b 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/clps711xfb.c
@@ -33,7 +33,6 @@
#include <asm/mach-types.h>
#include <linux/uaccess.h>
-#include <asm/hardware/clps7111.h>
#include <mach/syspld.h>
struct fb_info *cfb;