drivers/pwm/pwm-vt8500.c - kernel/msm-4.9 - Gitiles

 /*
  * drivers/pwm/pwm-vt8500.c
  *
  * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
  * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
  * may be copied, distributed, and modified under those terms.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/pwm.h>
 #include <linux/delay.h>
 #include <linux/clk.h>

 #include <asm/div64.h>

 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>

 /*
  * SoC architecture allocates register space for 4 PWMs but only
  * 2 are currently implemented.
  */
 #define VT8500_NR_PWMS	2

 #define REG_CTRL(pwm)		(((pwm) << 4) + 0x00)
 #define REG_SCALAR(pwm)		(((pwm) << 4) + 0x04)
 #define REG_PERIOD(pwm)		(((pwm) << 4) + 0x08)
 #define REG_DUTY(pwm)		(((pwm) << 4) + 0x0C)
 #define REG_STATUS		0x40

 #define CTRL_ENABLE		BIT(0)
 #define CTRL_INVERT		BIT(1)
 #define CTRL_AUTOLOAD		BIT(2)
 #define CTRL_STOP_IMM		BIT(3)
 #define CTRL_LOAD_PRESCALE	BIT(4)
 #define CTRL_LOAD_PERIOD	BIT(5)

 #define STATUS_CTRL_UPDATE	BIT(0)
 #define STATUS_SCALAR_UPDATE	BIT(1)
 #define STATUS_PERIOD_UPDATE	BIT(2)
 #define STATUS_DUTY_UPDATE	BIT(3)
 #define STATUS_ALL_UPDATE	0x0F

 struct vt8500_chip {
 	struct pwm_chip chip;
 	void __iomem *base;
 	struct clk *clk;
 };

 #define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)

 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
 static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
 {
 	int loops = msecs_to_loops(10);
 	u32 mask = bitmask << (nr << 8);

 	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
 		cpu_relax();

 	if (unlikely(!loops))
 		dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
 			 mask);
 }

 static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		int duty_ns, int period_ns)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 	unsigned long long c;
 	unsigned long period_cycles, prescale, pv, dc;
 	int err;
 	u32 val;

 	err = clk_enable(vt8500->clk);
 	if (err < 0) {
 		dev_err(chip->dev, "failed to enable clock\n");
 		return err;
 	}

 	c = clk_get_rate(vt8500->clk);
 	c = c * period_ns;
 	do_div(c, 1000000000);
 	period_cycles = c;

 	if (period_cycles < 1)
 		period_cycles = 1;
 	prescale = (period_cycles - 1) / 4096;
 	pv = period_cycles / (prescale + 1) - 1;
 	if (pv > 4095)
 		pv = 4095;

 	if (prescale > 1023) {
 		clk_disable(vt8500->clk);
 		return -EINVAL;
 	}

 	c = (unsigned long long)pv * duty_ns;
 	do_div(c, period_ns);
 	dc = c;

 	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);

 	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);

 	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);

 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
 	val |= CTRL_AUTOLOAD;
 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

 	clk_disable(vt8500->clk);
 	return 0;
 }

 static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 	int err;
 	u32 val;

 	err = clk_enable(vt8500->clk);
 	if (err < 0) {
 		dev_err(chip->dev, "failed to enable clock\n");
 		return err;
 	}

 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
 	val |= CTRL_ENABLE;
 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

 	return 0;
 }

 static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 	u32 val;

 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
 	val &= ~CTRL_ENABLE;
 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

 	clk_disable(vt8500->clk);
 }

 static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
 				   struct pwm_device *pwm,
 				   enum pwm_polarity polarity)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 	u32 val;

 	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));

 	if (polarity == PWM_POLARITY_INVERSED)
 		val |= CTRL_INVERT;
 	else
 		val &= ~CTRL_INVERT;

 	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
 	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

 	return 0;
 }

 static struct pwm_ops vt8500_pwm_ops = {
 	.enable = vt8500_pwm_enable,
 	.disable = vt8500_pwm_disable,
 	.config = vt8500_pwm_config,
 	.set_polarity = vt8500_pwm_set_polarity,
 	.owner = THIS_MODULE,
 };

 static const struct of_device_id vt8500_pwm_dt_ids[] = {
 	{ .compatible = "via,vt8500-pwm", },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);

 static int vt8500_pwm_probe(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 	struct resource *r;
 	struct device_node *np = pdev->dev.of_node;
 	int ret;

 	if (!np) {
 		dev_err(&pdev->dev, "invalid devicetree node\n");
 		return -EINVAL;
 	}

 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
 		return -ENOMEM;
 	}

 	chip->chip.dev = &pdev->dev;
 	chip->chip.ops = &vt8500_pwm_ops;
 	chip->chip.of_xlate = of_pwm_xlate_with_flags;
 	chip->chip.of_pwm_n_cells = 3;
 	chip->chip.base = -1;
 	chip->chip.npwm = VT8500_NR_PWMS;

 	chip->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(chip->clk)) {
 		dev_err(&pdev->dev, "clock source not specified\n");
 		return PTR_ERR(chip->clk);
 	}

 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
 		return -ENODEV;
 	}

 	chip->base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(chip->base))
 		return PTR_ERR(chip->base);

 	ret = clk_prepare(chip->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to prepare clock\n");
 		return ret;
 	}

 	ret = pwmchip_add(&chip->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip\n");
 		return ret;
 	}

 	platform_set_drvdata(pdev, chip);
 	return ret;
 }

 static int vt8500_pwm_remove(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;

 	chip = platform_get_drvdata(pdev);
 	if (chip == NULL)
 		return -ENODEV;

 	clk_unprepare(chip->clk);

 	return pwmchip_remove(&chip->chip);
 }

 static struct platform_driver vt8500_pwm_driver = {
 	.probe		= vt8500_pwm_probe,
 	.remove		= vt8500_pwm_remove,
 	.driver		= {
 		.name	= "vt8500-pwm",
 		.owner	= THIS_MODULE,
 		.of_match_table = vt8500_pwm_dt_ids,
 	},
 };
 module_platform_driver(vt8500_pwm_driver);

 MODULE_DESCRIPTION("VT8500 PWM Driver");
 MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
 MODULE_LICENSE("GPL v2");
	/*
	* drivers/pwm/pwm-vt8500.c
	*
	* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
	* Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
	*
	* This software is licensed under the terms of the GNU General Public
	* License version 2, as published by the Free Software Foundation, and
	* may be copied, distributed, and modified under those terms.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/platform_device.h>
	#include <linux/slab.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/pwm.h>
	#include <linux/delay.h>
	#include <linux/clk.h>

	#include <asm/div64.h>

	#include <linux/of.h>
	#include <linux/of_device.h>
	#include <linux/of_address.h>

	/*
	* SoC architecture allocates register space for 4 PWMs but only
	* 2 are currently implemented.
	*/
	#define VT8500_NR_PWMS 2

	#define REG_CTRL(pwm) (((pwm) << 4) + 0x00)
	#define REG_SCALAR(pwm) (((pwm) << 4) + 0x04)
	#define REG_PERIOD(pwm) (((pwm) << 4) + 0x08)
	#define REG_DUTY(pwm) (((pwm) << 4) + 0x0C)
	#define REG_STATUS 0x40

	#define CTRL_ENABLE BIT(0)
	#define CTRL_INVERT BIT(1)
	#define CTRL_AUTOLOAD BIT(2)
	#define CTRL_STOP_IMM BIT(3)
	#define CTRL_LOAD_PRESCALE BIT(4)
	#define CTRL_LOAD_PERIOD BIT(5)

	#define STATUS_CTRL_UPDATE BIT(0)
	#define STATUS_SCALAR_UPDATE BIT(1)
	#define STATUS_PERIOD_UPDATE BIT(2)
	#define STATUS_DUTY_UPDATE BIT(3)
	#define STATUS_ALL_UPDATE 0x0F

	struct vt8500_chip {
	struct pwm_chip chip;
	void __iomem *base;
	struct clk *clk;
	};

	#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)

	#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
	static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask)
	{
	int loops = msecs_to_loops(10);
	u32 mask = bitmask << (nr << 8);

	while ((readl(vt8500->base + REG_STATUS) & mask) && --loops)
	cpu_relax();

	if (unlikely(!loops))
	dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n",
	mask);
	}

	static int vt8500_pwm_config(struct pwm_chip chip, struct pwm_device pwm,
	int duty_ns, int period_ns)
	{
	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
	unsigned long long c;
	unsigned long period_cycles, prescale, pv, dc;
	int err;
	u32 val;

	err = clk_enable(vt8500->clk);
	if (err < 0) {
	dev_err(chip->dev, "failed to enable clock\n");
	return err;
	}

	c = clk_get_rate(vt8500->clk);
	c = c * period_ns;
	do_div(c, 1000000000);
	period_cycles = c;

	if (period_cycles < 1)
	period_cycles = 1;
	prescale = (period_cycles - 1) / 4096;
	pv = period_cycles / (prescale + 1) - 1;
	if (pv > 4095)
	pv = 4095;

	if (prescale > 1023) {
	clk_disable(vt8500->clk);
	return -EINVAL;
	}

	c = (unsigned long long)pv * duty_ns;
	do_div(c, period_ns);
	dc = c;

	writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE);

	writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE);

	writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE);

	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
	val \|= CTRL_AUTOLOAD;
	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

	clk_disable(vt8500->clk);
	return 0;
	}

	static int vt8500_pwm_enable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
	int err;
	u32 val;

	err = clk_enable(vt8500->clk);
	if (err < 0) {
	dev_err(chip->dev, "failed to enable clock\n");
	return err;
	}

	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
	val \|= CTRL_ENABLE;
	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

	return 0;
	}

	static void vt8500_pwm_disable(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
	u32 val;

	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));
	val &= ~CTRL_ENABLE;
	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

	clk_disable(vt8500->clk);
	}

	static int vt8500_pwm_set_polarity(struct pwm_chip *chip,
	struct pwm_device *pwm,
	enum pwm_polarity polarity)
	{
	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
	u32 val;

	val = readl(vt8500->base + REG_CTRL(pwm->hwpwm));

	if (polarity == PWM_POLARITY_INVERSED)
	val \|= CTRL_INVERT;
	else
	val &= ~CTRL_INVERT;

	writel(val, vt8500->base + REG_CTRL(pwm->hwpwm));
	pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE);

	return 0;
	}

	static struct pwm_ops vt8500_pwm_ops = {
	.enable = vt8500_pwm_enable,
	.disable = vt8500_pwm_disable,
	.config = vt8500_pwm_config,
	.set_polarity = vt8500_pwm_set_polarity,
	.owner = THIS_MODULE,
	};

	static const struct of_device_id vt8500_pwm_dt_ids[] = {
	{ .compatible = "via,vt8500-pwm", },
	{ /* Sentinel */ }
	};
	MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);

	static int vt8500_pwm_probe(struct platform_device *pdev)
	{
	struct vt8500_chip *chip;
	struct resource *r;
	struct device_node *np = pdev->dev.of_node;
	int ret;

	if (!np) {
	dev_err(&pdev->dev, "invalid devicetree node\n");
	return -EINVAL;
	}

	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
	if (chip == NULL) {
	dev_err(&pdev->dev, "failed to allocate memory\n");
	return -ENOMEM;
	}

	chip->chip.dev = &pdev->dev;
	chip->chip.ops = &vt8500_pwm_ops;
	chip->chip.of_xlate = of_pwm_xlate_with_flags;
	chip->chip.of_pwm_n_cells = 3;
	chip->chip.base = -1;
	chip->chip.npwm = VT8500_NR_PWMS;

	chip->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(chip->clk)) {
	dev_err(&pdev->dev, "clock source not specified\n");
	return PTR_ERR(chip->clk);
	}

	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (r == NULL) {
	dev_err(&pdev->dev, "no memory resource defined\n");
	return -ENODEV;
	}

	chip->base = devm_ioremap_resource(&pdev->dev, r);
	if (IS_ERR(chip->base))
	return PTR_ERR(chip->base);

	ret = clk_prepare(chip->clk);
	if (ret < 0) {
	dev_err(&pdev->dev, "failed to prepare clock\n");
	return ret;
	}

	ret = pwmchip_add(&chip->chip);
	if (ret < 0) {
	dev_err(&pdev->dev, "failed to add PWM chip\n");
	return ret;
	}

	platform_set_drvdata(pdev, chip);
	return ret;
	}

	static int vt8500_pwm_remove(struct platform_device *pdev)
	{
	struct vt8500_chip *chip;

	chip = platform_get_drvdata(pdev);
	if (chip == NULL)
	return -ENODEV;

	clk_unprepare(chip->clk);

	return pwmchip_remove(&chip->chip);
	}

	static struct platform_driver vt8500_pwm_driver = {
	.probe = vt8500_pwm_probe,
	.remove = vt8500_pwm_remove,
	.driver = {
	.name = "vt8500-pwm",
	.owner = THIS_MODULE,
	.of_match_table = vt8500_pwm_dt_ids,
	},
	};
	module_platform_driver(vt8500_pwm_driver);

	MODULE_DESCRIPTION("VT8500 PWM Driver");
	MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
	MODULE_LICENSE("GPL v2");