[PATCH] tpm: Fix concerns with TPM driver -- use enums
Convert #defines to named enums where that preference has been indicated by
other kernel developers.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index c937ea2..7da4fe9 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -28,19 +28,35 @@
#include <linux/spinlock.h>
#include "tpm.h"
-#define TPM_MINOR 224 /* officially assigned */
+enum tpm_const {
+ TPM_MINOR = 224, /* officially assigned */
+ TPM_BUFSIZE = 2048,
+ TPM_NUM_DEVICES = 256,
+ TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int))
+};
-#define TPM_BUFSIZE 2048
+ /* PCI configuration addresses */
+enum tpm_pci_config_addr {
+ PCI_GEN_PMCON_1 = 0xA0,
+ PCI_GEN1_DEC = 0xE4,
+ PCI_LPC_EN = 0xE6,
+ PCI_GEN2_DEC = 0xEC
+};
-/* PCI configuration addresses */
-#define PCI_GEN_PMCON_1 0xA0
-#define PCI_GEN1_DEC 0xE4
-#define PCI_LPC_EN 0xE6
-#define PCI_GEN2_DEC 0xEC
+enum tpm_config {
+ TPM_LOCK_REG = 0x0D,
+ TPM_INTERUPT_REG = 0x0A,
+ TPM_BASE_ADDR_LO = 0x08,
+ TPM_BASE_ADDR_HI = 0x09,
+ TPM_UNLOCK_VALUE = 0x55,
+ TPM_LOCK_VALUE = 0xAA,
+ TPM_DISABLE_INTERUPT_VALUE = 0x00
+};
+
static LIST_HEAD(tpm_chip_list);
static DEFINE_SPINLOCK(driver_lock);
-static int dev_mask[32];
+static int dev_mask[TPM_NUM_MASK_ENTRIES];
static void user_reader_timeout(unsigned long ptr)
{
@@ -102,17 +118,18 @@
pci_write_config_dword(pci_dev, PCI_GEN_PMCON_1,
tmp);
}
- tpm_write_index(0x0D, 0x55); /* unlock 4F */
- tpm_write_index(0x0A, 0x00); /* int disable */
- tpm_write_index(0x08, base); /* base addr lo */
- tpm_write_index(0x09, (base & 0xFF00) >> 8); /* base addr hi */
- tpm_write_index(0x0D, 0xAA); /* lock 4F */
break;
case PCI_VENDOR_ID_AMD:
/* nothing yet */
break;
}
+ tpm_write_index(TPM_LOCK_REG, TPM_UNLOCK_VALUE);
+ tpm_write_index(TPM_INTERUPT_REG, TPM_DISABLE_INTERUPT_VALUE);
+ tpm_write_index(TPM_BASE_ADDR_LO, base);
+ tpm_write_index(TPM_BASE_ADDR_HI, (base & 0xFF00) >> 8);
+ tpm_write_index(TPM_LOCK_REG, TPM_LOCK_VALUE);
+
return 0;
}
@@ -527,7 +544,7 @@
pci_disable_device(pci_dev);
- dev_mask[chip->dev_num / 32] &= !(1 << (chip->dev_num % 32));
+ dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &= !(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
kfree(chip);
@@ -608,10 +625,11 @@
chip->dev_num = -1;
- for (i = 0; i < 32; i++)
- for (j = 0; j < 8; j++)
+ for (i = 0; i < TPM_NUM_MASK_ENTRIES; i++)
+ for (j = 0; j < 8 * sizeof(int); j++)
if ((dev_mask[i] & (1 << j)) == 0) {
- chip->dev_num = i * 32 + j;
+ chip->dev_num =
+ i * TPM_NUM_MASK_ENTRIES + j;
dev_mask[i] |= 1 << j;
goto dev_num_search_complete;
}
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 3c4ee43..1a94a8c3 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -25,11 +25,16 @@
#include <linux/fs.h>
#include <linux/miscdevice.h>
-#define TPM_TIMEOUT 5 /* msecs */
+enum tpm_timeout {
+ TPM_TIMEOUT = 5, /* msecs */
+};
/* TPM addresses */
-#define TPM_ADDR 0x4E
-#define TPM_DATA 0x4F
+enum tpm_addr {
+ TPM_ADDR = 0x4E,
+ TPM_DATA = 0x4F
+};
+
struct tpm_chip;
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index f9333e7..3271391 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -22,17 +22,22 @@
#include "tpm.h"
/* Atmel definitions */
-#define TPM_ATML_BASE 0x400
+enum tpm_atmel_addr{
+ TPM_ATML_BASE = 0x400
+};
/* write status bits */
-#define ATML_STATUS_ABORT 0x01
-#define ATML_STATUS_LASTBYTE 0x04
-
+enum tpm_atmel_write_status {
+ ATML_STATUS_ABORT = 0x01,
+ ATML_STATUS_LASTBYTE = 0x04
+};
/* read status bits */
-#define ATML_STATUS_BUSY 0x01
-#define ATML_STATUS_DATA_AVAIL 0x02
-#define ATML_STATUS_REWRITE 0x04
-
+enum tpm_atmel_read_status {
+ ATML_STATUS_BUSY = 0x01,
+ ATML_STATUS_DATA_AVAIL = 0x02,
+ ATML_STATUS_REWRITE = 0x04,
+ ATML_STATUS_READY = 0x08
+};
static int tpm_atml_recv(struct tpm_chip *chip, u8 * buf, size_t count)
{
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 6e5ffca..24832ab 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -22,34 +22,42 @@
#include "tpm.h"
/* National definitions */
-#define TPM_NSC_BASE 0x360
-#define TPM_NSC_IRQ 0x07
+enum tpm_nsc_addr {
+ TPM_NSC_BASE = 0x360,
+ TPM_NSC_IRQ = 0x07
+};
-#define NSC_LDN_INDEX 0x07
-#define NSC_SID_INDEX 0x20
-#define NSC_LDC_INDEX 0x30
-#define NSC_DIO_INDEX 0x60
-#define NSC_CIO_INDEX 0x62
-#define NSC_IRQ_INDEX 0x70
-#define NSC_ITS_INDEX 0x71
+enum tpm_nsc_index {
+ NSC_LDN_INDEX = 0x07,
+ NSC_SID_INDEX = 0x20,
+ NSC_LDC_INDEX = 0x30,
+ NSC_DIO_INDEX = 0x60,
+ NSC_CIO_INDEX = 0x62,
+ NSC_IRQ_INDEX = 0x70,
+ NSC_ITS_INDEX = 0x71
+};
-#define NSC_STATUS 0x01
-#define NSC_COMMAND 0x01
-#define NSC_DATA 0x00
+enum tpm_nsc_status_loc {
+ NSC_STATUS = 0x01,
+ NSC_COMMAND = 0x01,
+ NSC_DATA = 0x00
+};
/* status bits */
-#define NSC_STATUS_OBF 0x01 /* output buffer full */
-#define NSC_STATUS_IBF 0x02 /* input buffer full */
-#define NSC_STATUS_F0 0x04 /* F0 */
-#define NSC_STATUS_A2 0x08 /* A2 */
-#define NSC_STATUS_RDY 0x10 /* ready to receive command */
-#define NSC_STATUS_IBR 0x20 /* ready to receive data */
-
+enum tpm_nsc_status{
+ NSC_STATUS_OBF = 0x01, /* output buffer full */
+ NSC_STATUS_IBF = 0x02, /* input buffer full */
+ NSC_STATUS_F0 = 0x04, /* F0 */
+ NSC_STATUS_A2 = 0x08, /* A2 */
+ NSC_STATUS_RDY = 0x10, /* ready to receive command */
+ NSC_STATUS_IBR = 0x20 /* ready to receive data */
+};
/* command bits */
-#define NSC_COMMAND_NORMAL 0x01 /* normal mode */
-#define NSC_COMMAND_EOC 0x03
-#define NSC_COMMAND_CANCEL 0x22
-
+enum tpm_nsc_cmd_mode {
+ NSC_COMMAND_NORMAL = 0x01, /* normal mode */
+ NSC_COMMAND_EOC = 0x03,
+ NSC_COMMAND_CANCEL = 0x22
+};
/*
* Wait for a certain status to appear
*/