Merge branch 'for-next' of git://sources.calxeda.com/kernel/linux into HEAD
diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt
index ef9d06c..0efedaa 100644
--- a/Documentation/devicetree/usage-model.txt
+++ b/Documentation/devicetree/usage-model.txt
@@ -191,9 +191,11 @@
};
The bootargs property contains the kernel arguments, and the initrd-*
-properties define the address and size of an initrd blob. The
-chosen node may also optionally contain an arbitrary number of
-additional properties for platform-specific configuration data.
+properties define the address and size of an initrd blob. Note that
+initrd-end is the first address after the initrd image, so this doesn't
+match the usual semantic of struct resource. The chosen node may also
+optionally contain an arbitrary number of additional properties for
+platform-specific configuration data.
During early boot, the architecture setup code calls of_scan_flat_dt()
several times with different helper callbacks to parse device tree
diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/arm/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/include/dt-bindings/gpio/gpio.h b/include/dt-bindings/gpio/gpio.h
new file mode 100644
index 0000000..e6b1e0a
--- /dev/null
+++ b/include/dt-bindings/gpio/gpio.h
@@ -0,0 +1,15 @@
+/*
+ * This header provides constants for most GPIO bindings.
+ *
+ * Most GPIO bindings include a flags cell as part of the GPIO specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_GPIO_GPIO_H
+#define _DT_BINDINGS_GPIO_GPIO_H
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
new file mode 100644
index 0000000..1ea1b70
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -0,0 +1,22 @@
+/*
+ * This header provides constants for the ARM GIC.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ARM_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* interrupt specific cell 0 */
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+/*
+ * Interrupt specifier cell 2.
+ * The flaggs in irq.h are valid, plus those below.
+ */
+#define GIC_CPU_MASK_RAW(x) ((x) << 8)
+#define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/irq.h b/include/dt-bindings/interrupt-controller/irq.h
new file mode 100644
index 0000000..33a1003
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq.h
@@ -0,0 +1,19 @@
+/*
+ * This header provides constants for most IRQ bindings.
+ *
+ * Most IRQ bindings include a flags cell as part of the IRQ specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_IRQ_H
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#endif
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 3863a4d..2a93b64 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -11,9 +11,10 @@
*
*/
-#ifdef CONFIG_OF_DEVICE
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+
+#ifdef CONFIG_OF_DEVICE
#include <linux/pm.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
@@ -100,7 +101,7 @@
#if !defined(CONFIG_OF_ADDRESS)
struct of_dev_auxdata;
-struct device;
+struct device_node;
static inline int of_platform_populate(struct device_node *root,
const struct of_device_id *matches,
const struct of_dev_auxdata *lookup,
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 07125e6..3e73dfd 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -156,9 +156,9 @@
ld_flags = $(LDFLAGS) $(ldflags-y)
-dtc_cpp_flags = -Wp,-MD,$(depfile) -nostdinc \
+dtc_cpp_flags = -Wp,-MD,$(depfile).pre -nostdinc \
-I$(srctree)/arch/$(SRCARCH)/boot/dts \
- -I$(srctree)/arch/$(SRCARCH)/include/dts \
+ -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \
-undef -D__DTS__
# Finds the multi-part object the current object will be linked into
@@ -269,20 +269,17 @@
$(call cmd,dt_S_dtb)
quiet_cmd_dtc = DTC $@
-cmd_dtc = $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) -d $(depfile) $<
+cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
+ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
+ -i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \
+ -d $(depfile).dtc $(dtc-tmp) ; \
+ cat $(depfile).pre $(depfile).dtc > $(depfile)
$(obj)/%.dtb: $(src)/%.dts FORCE
$(call if_changed_dep,dtc)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts)
-quiet_cmd_dtc_cpp = DTC+CPP $@
-cmd_dtc_cpp = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
- $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 $(DTC_FLAGS) $(dtc-tmp)
-
-$(obj)/%.dtb: $(src)/%.dtsp FORCE
- $(call if_changed_dep,dtc_cpp)
-
# Bzip2
# ---------------------------------------------------------------------------
diff --git a/scripts/basic/fixdep.c b/scripts/basic/fixdep.c
index 7f6425e..078fe1d 100644
--- a/scripts/basic/fixdep.c
+++ b/scripts/basic/fixdep.c
@@ -320,49 +320,78 @@
char *end = m + len;
char *p;
char s[PATH_MAX];
- int first;
-
- p = strchr(m, ':');
- if (!p) {
- fprintf(stderr, "fixdep: parse error\n");
- exit(1);
- }
- memcpy(s, m, p-m); s[p-m] = 0;
- m = p+1;
+ int is_target;
+ int saw_any_target = 0;
+ int is_first_dep = 0;
clear_config();
- first = 1;
while (m < end) {
+ /* Skip any "white space" */
while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
m++;
+ /* Find next "white space" */
p = m;
- while (p < end && *p != ' ') p++;
- if (p == end) {
- do p--; while (!isalnum(*p));
+ while (p < end && *p != ' ' && *p != '\\' && *p != '\n')
p++;
+ /* Is the token we found a target name? */
+ is_target = (*(p-1) == ':');
+ /* Don't write any target names into the dependency file */
+ if (is_target) {
+ /* The /next/ file is the first dependency */
+ is_first_dep = 1;
+ } else {
+ /* Save this token/filename */
+ memcpy(s, m, p-m);
+ s[p - m] = 0;
+
+ /* Ignore certain dependencies */
+ if (strrcmp(s, "include/generated/autoconf.h") &&
+ strrcmp(s, "arch/um/include/uml-config.h") &&
+ strrcmp(s, "include/linux/kconfig.h") &&
+ strrcmp(s, ".ver")) {
+ /*
+ * Do not list the source file as dependency,
+ * so that kbuild is not confused if a .c file
+ * is rewritten into .S or vice versa. Storing
+ * it in source_* is needed for modpost to
+ * compute srcversions.
+ */
+ if (is_first_dep) {
+ /*
+ * If processing the concatenation of
+ * multiple dependency files, only
+ * process the first target name, which
+ * will be the original source name,
+ * and ignore any other target names,
+ * which will be intermediate temporary
+ * files.
+ */
+ if (!saw_any_target) {
+ saw_any_target = 1;
+ printf("source_%s := %s\n\n",
+ target, s);
+ printf("deps_%s := \\\n",
+ target);
+ }
+ is_first_dep = 0;
+ } else
+ printf(" %s \\\n", s);
+ do_config_file(s);
+ }
}
- memcpy(s, m, p-m); s[p-m] = 0;
- if (strrcmp(s, "include/generated/autoconf.h") &&
- strrcmp(s, "arch/um/include/uml-config.h") &&
- strrcmp(s, "include/linux/kconfig.h") &&
- strrcmp(s, ".ver")) {
- /*
- * Do not list the source file as dependency, so that
- * kbuild is not confused if a .c file is rewritten
- * into .S or vice versa. Storing it in source_* is
- * needed for modpost to compute srcversions.
- */
- if (first) {
- printf("source_%s := %s\n\n", target, s);
- printf("deps_%s := \\\n", target);
- } else
- printf(" %s \\\n", s);
- do_config_file(s);
- }
- first = 0;
+ /*
+ * Start searching for next token immediately after the first
+ * "whitespace" character that follows this token.
+ */
m = p + 1;
}
+
+ if (!saw_any_target) {
+ fprintf(stderr, "fixdep: parse error; no targets found\n");
+ exit(1);
+ }
+
printf("\n%s: $(deps_%s)\n\n", target, target);
printf("$(deps_%s):\n", target);
}