[PATCH] USB: omap_udc updates (mostly cleanups)
Various USB patches, mostly for portability:
- Fifo mode 1 didn't work previously (oopsed), so now it's fixed and
(why not) defines even more endpoints for composite devices.
- OMAP 1710 doesn't have an internal transceiver.
- Small PM update: if the USB link is suspended, don't disconnect on
entry to deep sleep.
- Be more correct about handling zero length control reads. OMAP
seems to mis-handle that protocol peculiarity though; best avoided.
- Platform device resources (for UDC and OTG controllers) now use
physical addresses, so /proc/iomem is more consistent.
- Minor cleanups, notably (by volume) for "sparse" NULL warnings.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 98cbcbc..4ec91a6 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,7 +52,6 @@
#include <asm/mach-types.h>
#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
#include <asm/arch/usb.h>
#include "omap_udc.h"
@@ -253,7 +252,7 @@
}
spin_lock_irqsave(&ep->udc->lock, flags);
- ep->desc = 0;
+ ep->desc = NULL;
nuke (ep, -ESHUTDOWN);
ep->ep.maxpacket = ep->maxpacket;
ep->has_dma = 0;
@@ -388,8 +387,8 @@
/*-------------------------------------------------------------------------*/
-#define FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
-#define FIFO_UNWRITABLE (UDC_EP_HALTED | FIFO_FULL)
+#define UDC_FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
+#define UDC_FIFO_UNWRITABLE (UDC_EP_HALTED | UDC_FIFO_FULL)
#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
@@ -433,7 +432,7 @@
/* PIO-IN isn't double buffered except for iso */
ep_stat = UDC_STAT_FLG_REG;
- if (ep_stat & FIFO_UNWRITABLE)
+ if (ep_stat & UDC_FIFO_UNWRITABLE)
return 0;
count = ep->ep.maxpacket;
@@ -504,7 +503,7 @@
if (ep_stat & UDC_EP_HALTED)
break;
- if (ep_stat & FIFO_FULL)
+ if (ep_stat & UDC_FIFO_FULL)
avail = ep->ep.maxpacket;
else {
avail = UDC_RXFSTAT_REG;
@@ -856,7 +855,7 @@
if (!list_empty(&ep->queue))
req = container_of(ep->queue.next, struct omap_req, queue);
else
- req = 0;
+ req = NULL;
active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0;
@@ -997,18 +996,19 @@
UDC_IRQ_EN_REG = irq_en;
}
- /* STATUS is reverse direction */
- UDC_EP_NUM_REG = is_in
- ? UDC_EP_SEL
- : (UDC_EP_SEL|UDC_EP_DIR);
+ /* STATUS for zero length DATA stages is
+ * always an IN ... even for IN transfers,
+ * a wierd case which seem to stall OMAP.
+ */
+ UDC_EP_NUM_REG = (UDC_EP_SEL|UDC_EP_DIR);
UDC_CTRL_REG = UDC_CLR_EP;
UDC_CTRL_REG = UDC_SET_FIFO_EN;
- UDC_EP_NUM_REG = udc->ep0_in ? 0 : UDC_EP_DIR;
+ UDC_EP_NUM_REG = UDC_EP_DIR;
/* cleanup */
udc->ep0_pending = 0;
done(ep, req, 0);
- req = 0;
+ req = NULL;
/* non-empty DATA stage */
} else if (is_in) {
@@ -1029,7 +1029,7 @@
(is_in ? next_in_dma : next_out_dma)(ep, req);
else if (req) {
if ((is_in ? write_fifo : read_fifo)(ep, req) == 1)
- req = 0;
+ req = NULL;
deselect_ep();
if (!is_in) {
UDC_CTRL_REG = UDC_SET_FIFO_EN;
@@ -1041,7 +1041,7 @@
irq_wait:
/* irq handler advances the queue */
- if (req != 0)
+ if (req != NULL)
list_add_tail(&req->queue, &ep->queue);
spin_unlock_irqrestore(&udc->lock, flags);
@@ -1238,6 +1238,8 @@
static void pullup_enable(struct omap_udc *udc)
{
+ udc->gadget.dev.parent->power.power_state = PMSG_ON;
+ udc->gadget.dev.power.power_state = PMSG_ON;
UDC_SYSCON1_REG |= UDC_PULLUP_EN;
#ifndef CONFIG_USB_OTG
if (!cpu_is_omap15xx())
@@ -1382,7 +1384,7 @@
static void ep0_irq(struct omap_udc *udc, u16 irq_src)
{
struct omap_ep *ep0 = &udc->ep[0];
- struct omap_req *req = 0;
+ struct omap_req *req = NULL;
ep0->irqs++;
@@ -1438,7 +1440,7 @@
if (req)
done(ep0, req, 0);
}
- req = 0;
+ req = NULL;
} else if (stat & UDC_STALL) {
UDC_CTRL_REG = UDC_CLR_HALT;
UDC_EP_NUM_REG = UDC_EP_DIR;
@@ -1511,9 +1513,6 @@
u.word[3] = UDC_DATA_REG;
UDC_EP_NUM_REG = 0;
} while (UDC_IRQ_SRC_REG & UDC_SETUP);
- le16_to_cpus (&u.r.wValue);
- le16_to_cpus (&u.r.wIndex);
- le16_to_cpus (&u.r.wLength);
/* Delegate almost all control requests to the gadget driver,
* except for a handful of ch9 status/feature requests that
@@ -1566,6 +1565,11 @@
UDC_CTRL_REG = UDC_SET_FIFO_EN;
ep->ackwait = 1 + ep->double_buf;
}
+ /* NOTE: assumes the host behaves sanely,
+ * only clearing real halts. Else we may
+ * need to kill pending transfers and then
+ * restart the queue... very messy for DMA!
+ */
}
VDBG("%s halt cleared by host\n", ep->name);
goto ep0out_status_stage;
@@ -2013,7 +2017,7 @@
udc->softconnect = 1;
/* hook up the driver */
- driver->driver.bus = 0;
+ driver->driver.bus = NULL;
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
spin_unlock_irqrestore(&udc->lock, flags);
@@ -2021,8 +2025,8 @@
status = driver->bind (&udc->gadget);
if (status) {
DBG("bind to %s --> %d\n", driver->driver.name, status);
- udc->gadget.dev.driver = 0;
- udc->driver = 0;
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
goto done;
}
DBG("bound to driver %s\n", driver->driver.name);
@@ -2035,8 +2039,8 @@
if (status < 0) {
ERR("can't bind to transceiver\n");
driver->unbind (&udc->gadget);
- udc->gadget.dev.driver = 0;
- udc->driver = 0;
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
goto done;
}
} else {
@@ -2071,7 +2075,7 @@
omap_vbus_session(&udc->gadget, 0);
if (udc->transceiver)
- (void) otg_set_peripheral(udc->transceiver, 0);
+ (void) otg_set_peripheral(udc->transceiver, NULL);
else
pullup_disable(udc);
@@ -2080,9 +2084,8 @@
spin_unlock_irqrestore(&udc->lock, flags);
driver->unbind(&udc->gadget);
- udc->gadget.dev.driver = 0;
- udc->driver = 0;
-
+ udc->gadget.dev.driver = NULL;
+ udc->driver = NULL;
DBG("unregistered driver '%s'\n", driver->driver.name);
return status;
@@ -2178,7 +2181,7 @@
tmp = OTG_REV_REG;
trans = USB_TRANSCEIVER_CTRL_REG;
- seq_printf(s, "OTG rev %d.%d, transceiver_ctrl %03x\n",
+ seq_printf(s, "\nOTG rev %d.%d, transceiver_ctrl %03x\n",
tmp >> 4, tmp & 0xf, trans);
tmp = OTG_SYSCON_1_REG;
seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
@@ -2235,6 +2238,7 @@
seq_printf(s, "otg_outctrl %04x" "\n", tmp);
tmp = OTG_TEST_REG;
seq_printf(s, "otg_test %04x" "\n", tmp);
+ return 0;
}
static int proc_udc_show(struct seq_file *s, void *_)
@@ -2378,7 +2382,7 @@
static int proc_udc_open(struct inode *inode, struct file *file)
{
- return single_open(file, proc_udc_show, 0);
+ return single_open(file, proc_udc_show, NULL);
}
static struct file_operations proc_ops = {
@@ -2399,7 +2403,7 @@
static void remove_proc_file(void)
{
- remove_proc_entry(proc_filename, 0);
+ remove_proc_entry(proc_filename, NULL);
}
#else
@@ -2505,7 +2509,7 @@
{
complete(udc->done);
kfree (udc);
- udc = 0;
+ udc = NULL;
}
static int __init
@@ -2577,23 +2581,33 @@
case 1:
OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+ OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
+
OMAP_BULK_EP("ep3in", USB_DIR_IN | 3);
OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4);
+ OMAP_INT_EP("ep10in", USB_DIR_IN | 10, 16);
OMAP_BULK_EP("ep5in", USB_DIR_IN | 5);
OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
+ OMAP_INT_EP("ep11in", USB_DIR_IN | 11, 16);
+
OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6);
+ OMAP_INT_EP("ep12in", USB_DIR_IN | 12, 16);
OMAP_BULK_EP("ep7in", USB_DIR_IN | 7);
OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
+ OMAP_INT_EP("ep13in", USB_DIR_IN | 13, 16);
+ OMAP_INT_EP("ep13out", USB_DIR_OUT | 13, 16);
+
OMAP_BULK_EP("ep8in", USB_DIR_IN | 8);
OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8);
+ OMAP_INT_EP("ep14in", USB_DIR_IN | 14, 16);
+ OMAP_INT_EP("ep14out", USB_DIR_OUT | 14, 16);
- OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
- OMAP_INT_EP("ep10out", USB_DIR_IN | 10, 16);
- OMAP_INT_EP("ep11in", USB_DIR_IN | 9, 16);
- OMAP_INT_EP("ep12out", USB_DIR_IN | 10, 16);
+ OMAP_BULK_EP("ep15in", USB_DIR_IN | 15);
+ OMAP_BULK_EP("ep15out", USB_DIR_OUT | 15);
+
break;
#ifdef USE_ISO
@@ -2640,8 +2654,8 @@
struct platform_device *odev = to_platform_device(dev);
int status = -ENODEV;
int hmc;
- struct otg_transceiver *xceiv = 0;
- const char *type = 0;
+ struct otg_transceiver *xceiv = NULL;
+ const char *type = NULL;
struct omap_usb_config *config = dev->platform_data;
/* NOTE: "knows" the order of the resources! */
@@ -2678,6 +2692,15 @@
} else {
hmc = HMC_1610;
switch (hmc) {
+ case 0: /* POWERUP DEFAULT == 0 */
+ case 4:
+ case 12:
+ case 20:
+ if (!cpu_is_omap1710()) {
+ type = "integrated";
+ break;
+ }
+ /* FALL THROUGH */
case 3:
case 11:
case 16:
@@ -2688,21 +2711,15 @@
DBG("external transceiver not registered!\n");
if (config->otg)
goto cleanup0;
- type = "(unknown external)";
+ type = "unknown";
} else
type = xceiv->label;
break;
- case 0: /* POWERUP DEFAULT == 0 */
- case 4:
- case 12:
- case 20:
- type = "INTEGRATED";
- break;
case 21: /* internal loopback */
- type = "(loopback)";
+ type = "loopback";
break;
case 14: /* transceiverless */
- type = "(none)";
+ type = "no";
break;
default:
@@ -2710,14 +2727,14 @@
return -ENODEV;
}
}
- INFO("hmc mode %d, transceiver %s\n", hmc, type);
+ INFO("hmc mode %d, %s transceiver\n", hmc, type);
/* a "gadget" abstracts/virtualizes the controller */
status = omap_udc_setup(odev, xceiv);
if (status) {
goto cleanup0;
}
- xceiv = 0;
+ xceiv = NULL;
// "udc" is now valid
pullup_disable(udc);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
@@ -2765,7 +2782,7 @@
cleanup1:
kfree (udc);
- udc = 0;
+ udc = NULL;
cleanup0:
if (xceiv)
@@ -2788,7 +2805,7 @@
pullup_disable(udc);
if (udc->transceiver) {
put_device(udc->transceiver->dev);
- udc->transceiver = 0;
+ udc->transceiver = NULL;
}
UDC_SYSCON1_REG = 0;
@@ -2809,13 +2826,32 @@
return 0;
}
-static int omap_udc_suspend(struct device *dev, pm_message_t state, u32 level)
+/* suspend/resume/wakeup from sysfs (echo > power/state) or when the
+ * system is forced into deep sleep
+ *
+ * REVISIT we should probably reject suspend requests when there's a host
+ * session active, rather than disconnecting, at least on boards that can
+ * report VBUS irqs (UDC_DEVSTAT_REG.UDC_ATT). And in any case, we need to
+ * make host resumes and VBUS detection trigger OMAP wakeup events; that
+ * may involve talking to an external transceiver (e.g. isp1301).
+ */
+static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level)
{
- if (level != 0)
- return 0;
+ u32 devstat;
- DBG("suspend, state %d\n", state);
- omap_pullup(&udc->gadget, 0);
+ if (level != SUSPEND_POWER_DOWN)
+ return 0;
+ devstat = UDC_DEVSTAT_REG;
+
+ /* we're requesting 48 MHz clock if the pullup is enabled
+ * (== we're attached to the host) and we're not suspended,
+ * which would prevent entry to deep sleep...
+ */
+ if ((devstat & UDC_ATT) != 0 && (devstat & UDC_SUS) == 0) {
+ WARN("session active; suspend requires disconnect\n");
+ omap_pullup(&udc->gadget, 0);
+ }
+
udc->gadget.dev.power.power_state = PMSG_SUSPEND;
udc->gadget.dev.parent->power.power_state = PMSG_SUSPEND;
return 0;
@@ -2823,7 +2859,7 @@
static int omap_udc_resume(struct device *dev, u32 level)
{
- if (level != 0)
+ if (level != RESUME_POWER_ON)
return 0;
DBG("resume + wakeup/SRP\n");