drivers/base/regmap/regmap-irq.c - kernel/msm-4.9 - Gitiles

 /*
  * regmap based irq_chip
  *
  * Copyright 2011 Wolfson Microelectronics plc
  *
  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/export.h>
 #include <linux/device.h>
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/slab.h>

 #include "internal.h"

 struct regmap_irq_chip_data {
 	struct mutex lock;

 	struct regmap *map;
 	struct regmap_irq_chip *chip;

 	int irq_base;
 	struct irq_domain *domain;

 	unsigned int *status_buf;
 	unsigned int *mask_buf;
 	unsigned int *mask_buf_def;

 	unsigned int irq_reg_stride;
 };

 static inline const
 struct regmap_irq *irq_to_regmap_irq(struct regmap_irq_chip_data *data,
 				     int irq)
 {
 	return &data->chip->irqs[irq];
 }

 static void regmap_irq_lock(struct irq_data *data)
 {
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);

 	mutex_lock(&d->lock);
 }

 static void regmap_irq_sync_unlock(struct irq_data *data)
 {
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
 	struct regmap *map = d->map;
 	int i, ret;

 	/*
 	 * If there's been a change in the mask write it back to the
 	 * hardware.  We rely on the use of the regmap core cache to
 	 * suppress pointless writes.
 	 */
 	for (i = 0; i < d->chip->num_regs; i++) {
 		ret = regmap_update_bits(d->map, d->chip->mask_base +
 						(i * map->reg_stride *
 						d->irq_reg_stride),
 					 d->mask_buf_def[i], d->mask_buf[i]);
 		if (ret != 0)
 			dev_err(d->map->dev, "Failed to sync masks in %x\n",
 				d->chip->mask_base + (i * map->reg_stride));
 	}

 	mutex_unlock(&d->lock);
 }

 static void regmap_irq_enable(struct irq_data *data)
 {
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
 	struct regmap *map = d->map;
 	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);

 	d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask;
 }

 static void regmap_irq_disable(struct irq_data *data)
 {
 	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
 	struct regmap *map = d->map;
 	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);

 	d->mask_buf[irq_data->reg_offset / map->reg_stride] |= irq_data->mask;
 }

 static struct irq_chip regmap_irq_chip = {
 	.name			= "regmap",
 	.irq_bus_lock		= regmap_irq_lock,
 	.irq_bus_sync_unlock	= regmap_irq_sync_unlock,
 	.irq_disable		= regmap_irq_disable,
 	.irq_enable		= regmap_irq_enable,
 };

 static irqreturn_t regmap_irq_thread(int irq, void *d)
 {
 	struct regmap_irq_chip_data *data = d;
 	struct regmap_irq_chip *chip = data->chip;
 	struct regmap *map = data->map;
 	int ret, i;
 	bool handled = false;

 	/*
 	 * Ignore masked IRQs and ack if we need to; we ack early so
 	 * there is no race between handling and acknowleding the
 	 * interrupt.  We assume that typically few of the interrupts
 	 * will fire simultaneously so don't worry about overhead from
 	 * doing a write per register.
 	 */
 	for (i = 0; i < data->chip->num_regs; i++) {
 		ret = regmap_read(map, chip->status_base + (i * map->reg_stride
 				   * data->irq_reg_stride),
 				   &data->status_buf[i]);

 		if (ret != 0) {
 			dev_err(map->dev, "Failed to read IRQ status: %d\n",
 					ret);
 			return IRQ_NONE;
 		}

 		data->status_buf[i] &= ~data->mask_buf[i];

 		if (data->status_buf[i] && chip->ack_base) {
 			ret = regmap_write(map, chip->ack_base +
 						(i * map->reg_stride *
 						data->irq_reg_stride),
 					   data->status_buf[i]);
 			if (ret != 0)
 				dev_err(map->dev, "Failed to ack 0x%x: %d\n",
 					chip->ack_base + (i * map->reg_stride),
 					ret);
 		}
 	}

 	for (i = 0; i < chip->num_irqs; i++) {
 		if (data->status_buf[chip->irqs[i].reg_offset /
 				     map->reg_stride] & chip->irqs[i].mask) {
 			handle_nested_irq(irq_find_mapping(data->domain, i));
 			handled = true;
 		}
 	}

 	if (handled)
 		return IRQ_HANDLED;
 	else
 		return IRQ_NONE;
 }

 static int regmap_irq_map(struct irq_domain *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {
 	struct regmap_irq_chip_data *data = h->host_data;

 	irq_set_chip_data(virq, data);
 	irq_set_chip_and_handler(virq, &regmap_irq_chip, handle_edge_irq);
 	irq_set_nested_thread(virq, 1);

 	/* ARM needs us to explicitly flag the IRQ as valid
 	 * and will set them noprobe when we do so. */
 #ifdef CONFIG_ARM
 	set_irq_flags(virq, IRQF_VALID);
 #else
 	irq_set_noprobe(virq);
 #endif

 	return 0;
 }

 static struct irq_domain_ops regmap_domain_ops = {
 	.map	= regmap_irq_map,
 	.xlate	= irq_domain_xlate_twocell,
 };

 /**
  * regmap_add_irq_chip(): Use standard regmap IRQ controller handling
  *
  * map:       The regmap for the device.
  * irq:       The IRQ the device uses to signal interrupts
  * irq_flags: The IRQF_ flags to use for the primary interrupt.
  * chip:      Configuration for the interrupt controller.
  * data:      Runtime data structure for the controller, allocated on success
  *
  * Returns 0 on success or an errno on failure.
  *
  * In order for this to be efficient the chip really should use a
  * register cache.  The chip driver is responsible for restoring the
  * register values used by the IRQ controller over suspend and resume.
  */
 int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 			int irq_base, struct regmap_irq_chip *chip,
 			struct regmap_irq_chip_data **data)
 {
 	struct regmap_irq_chip_data *d;
 	int i;
 	int ret = -ENOMEM;

 	for (i = 0; i < chip->num_irqs; i++) {
 		if (chip->irqs[i].reg_offset % map->reg_stride)
 			return -EINVAL;
 		if (chip->irqs[i].reg_offset / map->reg_stride >=
 		    chip->num_regs)
 			return -EINVAL;
 	}

 	if (irq_base) {
 		irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
 		if (irq_base < 0) {
 			dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
 				 irq_base);
 			return irq_base;
 		}
 	}

 	d = kzalloc(sizeof(*d), GFP_KERNEL);
 	if (!d)
 		return -ENOMEM;

 	*data = d;

 	d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
 				GFP_KERNEL);
 	if (!d->status_buf)
 		goto err_alloc;

 	d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
 			      GFP_KERNEL);
 	if (!d->mask_buf)
 		goto err_alloc;

 	d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs,
 				  GFP_KERNEL);
 	if (!d->mask_buf_def)
 		goto err_alloc;

 	d->map = map;
 	d->chip = chip;
 	d->irq_base = irq_base;

 	if (chip->irq_reg_stride)
 		d->irq_reg_stride = chip->irq_reg_stride;
 	else
 		d->irq_reg_stride = 1;

 	mutex_init(&d->lock);

 	for (i = 0; i < chip->num_irqs; i++)
 		d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride]
 			|= chip->irqs[i].mask;

 	/* Mask all the interrupts by default */
 	for (i = 0; i < chip->num_regs; i++) {
 		d->mask_buf[i] = d->mask_buf_def[i];
 		ret = regmap_write(map, chip->mask_base + (i * map->reg_stride
 				   * d->irq_reg_stride),
 				   d->mask_buf[i]);
 		if (ret != 0) {
 			dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
 				chip->mask_base + (i * map->reg_stride), ret);
 			goto err_alloc;
 		}
 	}

 	if (irq_base)
 		d->domain = irq_domain_add_legacy(map->dev->of_node,
 						  chip->num_irqs, irq_base, 0,
 						  &regmap_domain_ops, d);
 	else
 		d->domain = irq_domain_add_linear(map->dev->of_node,
 						  chip->num_irqs,
 						  &regmap_domain_ops, d);
 	if (!d->domain) {
 		dev_err(map->dev, "Failed to create IRQ domain\n");
 		ret = -ENOMEM;
 		goto err_alloc;
 	}

 	ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags,
 				   chip->name, d);
 	if (ret != 0) {
 		dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret);
 		goto err_domain;
 	}

 	return 0;

 err_domain:
 	/* Should really dispose of the domain but... */
 err_alloc:
 	kfree(d->mask_buf_def);
 	kfree(d->mask_buf);
 	kfree(d->status_buf);
 	kfree(d);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(regmap_add_irq_chip);

 /**
  * regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip
  *
  * @irq: Primary IRQ for the device
  * @d:   regmap_irq_chip_data allocated by regmap_add_irq_chip()
  */
 void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
 {
 	if (!d)
 		return;

 	free_irq(irq, d);
 	/* We should unmap the domain but... */
 	kfree(d->mask_buf_def);
 	kfree(d->mask_buf);
 	kfree(d->status_buf);
 	kfree(d);
 }
 EXPORT_SYMBOL_GPL(regmap_del_irq_chip);

 /**
  * regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip
  *
  * Useful for drivers to request their own IRQs.
  *
  * @data: regmap_irq controller to operate on.
  */
 int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
 {
 	WARN_ON(!data->irq_base);
 	return data->irq_base;
 }
 EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);

 /**
  * regmap_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
  *
  * Useful for drivers to request their own IRQs.
  *
  * @data: regmap_irq controller to operate on.
  * @irq: index of the interrupt requested in the chip IRQs
  */
 int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
 {
 	return irq_create_mapping(data->domain, irq);
 }
 EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
	/*
	* regmap based irq_chip
	*
	* Copyright 2011 Wolfson Microelectronics plc
	*
	* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/export.h>
	#include <linux/device.h>
	#include <linux/regmap.h>
	#include <linux/irq.h>
	#include <linux/interrupt.h>
	#include <linux/irqdomain.h>
	#include <linux/slab.h>

	#include "internal.h"

	struct regmap_irq_chip_data {
	struct mutex lock;

	struct regmap *map;
	struct regmap_irq_chip *chip;

	int irq_base;
	struct irq_domain *domain;

	unsigned int *status_buf;
	unsigned int *mask_buf;
	unsigned int *mask_buf_def;

	unsigned int irq_reg_stride;
	};

	static inline const
	struct regmap_irq irq_to_regmap_irq(struct regmap_irq_chip_data data,
	int irq)
	{
	return &data->chip->irqs[irq];
	}

	static void regmap_irq_lock(struct irq_data *data)
	{
	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);

	mutex_lock(&d->lock);
	}

	static void regmap_irq_sync_unlock(struct irq_data *data)
	{
	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
	struct regmap *map = d->map;
	int i, ret;

	/*
	* If there's been a change in the mask write it back to the
	* hardware. We rely on the use of the regmap core cache to
	* suppress pointless writes.
	*/
	for (i = 0; i < d->chip->num_regs; i++) {
	ret = regmap_update_bits(d->map, d->chip->mask_base +
	(i * map->reg_stride *
	d->irq_reg_stride),
	d->mask_buf_def[i], d->mask_buf[i]);
	if (ret != 0)
	dev_err(d->map->dev, "Failed to sync masks in %x\n",
	d->chip->mask_base + (i * map->reg_stride));
	}

	mutex_unlock(&d->lock);
	}

	static void regmap_irq_enable(struct irq_data *data)
	{
	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
	struct regmap *map = d->map;
	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);

	d->mask_buf[irq_data->reg_offset / map->reg_stride] &= ~irq_data->mask;
	}

	static void regmap_irq_disable(struct irq_data *data)
	{
	struct regmap_irq_chip_data *d = irq_data_get_irq_chip_data(data);
	struct regmap *map = d->map;
	const struct regmap_irq *irq_data = irq_to_regmap_irq(d, data->hwirq);

	d->mask_buf[irq_data->reg_offset / map->reg_stride] \|= irq_data->mask;
	}

	static struct irq_chip regmap_irq_chip = {
	.name = "regmap",
	.irq_bus_lock = regmap_irq_lock,
	.irq_bus_sync_unlock = regmap_irq_sync_unlock,
	.irq_disable = regmap_irq_disable,
	.irq_enable = regmap_irq_enable,
	};

	static irqreturn_t regmap_irq_thread(int irq, void *d)
	{
	struct regmap_irq_chip_data *data = d;
	struct regmap_irq_chip *chip = data->chip;
	struct regmap *map = data->map;
	int ret, i;
	bool handled = false;

	/*
	* Ignore masked IRQs and ack if we need to; we ack early so
	* there is no race between handling and acknowleding the
	* interrupt. We assume that typically few of the interrupts
	* will fire simultaneously so don't worry about overhead from
	* doing a write per register.
	*/
	for (i = 0; i < data->chip->num_regs; i++) {
	ret = regmap_read(map, chip->status_base + (i * map->reg_stride
	* data->irq_reg_stride),
	&data->status_buf[i]);

	if (ret != 0) {
	dev_err(map->dev, "Failed to read IRQ status: %d\n",
	ret);
	return IRQ_NONE;
	}

	data->status_buf[i] &= ~data->mask_buf[i];

	if (data->status_buf[i] && chip->ack_base) {
	ret = regmap_write(map, chip->ack_base +
	(i * map->reg_stride *
	data->irq_reg_stride),
	data->status_buf[i]);
	if (ret != 0)
	dev_err(map->dev, "Failed to ack 0x%x: %d\n",
	chip->ack_base + (i * map->reg_stride),
	ret);
	}
	}

	for (i = 0; i < chip->num_irqs; i++) {
	if (data->status_buf[chip->irqs[i].reg_offset /
	map->reg_stride] & chip->irqs[i].mask) {
	handle_nested_irq(irq_find_mapping(data->domain, i));
	handled = true;
	}
	}

	if (handled)
	return IRQ_HANDLED;
	else
	return IRQ_NONE;
	}

	static int regmap_irq_map(struct irq_domain *h, unsigned int virq,
	irq_hw_number_t hw)
	{
	struct regmap_irq_chip_data *data = h->host_data;

	irq_set_chip_data(virq, data);
	irq_set_chip_and_handler(virq, &regmap_irq_chip, handle_edge_irq);
	irq_set_nested_thread(virq, 1);

	/* ARM needs us to explicitly flag the IRQ as valid
	* and will set them noprobe when we do so. */
	#ifdef CONFIG_ARM
	set_irq_flags(virq, IRQF_VALID);
	#else
	irq_set_noprobe(virq);
	#endif

	return 0;
	}

	static struct irq_domain_ops regmap_domain_ops = {
	.map = regmap_irq_map,
	.xlate = irq_domain_xlate_twocell,
	};

	/**
	* regmap_add_irq_chip(): Use standard regmap IRQ controller handling
	*
	* map: The regmap for the device.
	* irq: The IRQ the device uses to signal interrupts
	* irq_flags: The IRQF_ flags to use for the primary interrupt.
	* chip: Configuration for the interrupt controller.
	* data: Runtime data structure for the controller, allocated on success
	*
	* Returns 0 on success or an errno on failure.
	*
	* In order for this to be efficient the chip really should use a
	* register cache. The chip driver is responsible for restoring the
	* register values used by the IRQ controller over suspend and resume.
	*/
	int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
	int irq_base, struct regmap_irq_chip *chip,
	struct regmap_irq_chip_data **data)
	{
	struct regmap_irq_chip_data *d;
	int i;
	int ret = -ENOMEM;

	for (i = 0; i < chip->num_irqs; i++) {
	if (chip->irqs[i].reg_offset % map->reg_stride)
	return -EINVAL;
	if (chip->irqs[i].reg_offset / map->reg_stride >=
	chip->num_regs)
	return -EINVAL;
	}

	if (irq_base) {
	irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
	if (irq_base < 0) {
	dev_warn(map->dev, "Failed to allocate IRQs: %d\n",
	irq_base);
	return irq_base;
	}
	}

	d = kzalloc(sizeof(*d), GFP_KERNEL);
	if (!d)
	return -ENOMEM;

	*data = d;

	d->status_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
	GFP_KERNEL);
	if (!d->status_buf)
	goto err_alloc;

	d->mask_buf = kzalloc(sizeof(unsigned int) * chip->num_regs,
	GFP_KERNEL);
	if (!d->mask_buf)
	goto err_alloc;

	d->mask_buf_def = kzalloc(sizeof(unsigned int) * chip->num_regs,
	GFP_KERNEL);
	if (!d->mask_buf_def)
	goto err_alloc;

	d->map = map;
	d->chip = chip;
	d->irq_base = irq_base;

	if (chip->irq_reg_stride)
	d->irq_reg_stride = chip->irq_reg_stride;
	else
	d->irq_reg_stride = 1;

	mutex_init(&d->lock);

	for (i = 0; i < chip->num_irqs; i++)
	d->mask_buf_def[chip->irqs[i].reg_offset / map->reg_stride]
	\|= chip->irqs[i].mask;

	/* Mask all the interrupts by default */
	for (i = 0; i < chip->num_regs; i++) {
	d->mask_buf[i] = d->mask_buf_def[i];
	ret = regmap_write(map, chip->mask_base + (i * map->reg_stride
	* d->irq_reg_stride),
	d->mask_buf[i]);
	if (ret != 0) {
	dev_err(map->dev, "Failed to set masks in 0x%x: %d\n",
	chip->mask_base + (i * map->reg_stride), ret);
	goto err_alloc;
	}
	}

	if (irq_base)
	d->domain = irq_domain_add_legacy(map->dev->of_node,
	chip->num_irqs, irq_base, 0,
	&regmap_domain_ops, d);
	else
	d->domain = irq_domain_add_linear(map->dev->of_node,
	chip->num_irqs,
	&regmap_domain_ops, d);
	if (!d->domain) {
	dev_err(map->dev, "Failed to create IRQ domain\n");
	ret = -ENOMEM;
	goto err_alloc;
	}

	ret = request_threaded_irq(irq, NULL, regmap_irq_thread, irq_flags,
	chip->name, d);
	if (ret != 0) {
	dev_err(map->dev, "Failed to request IRQ %d: %d\n", irq, ret);
	goto err_domain;
	}

	return 0;

	err_domain:
	/* Should really dispose of the domain but... */
	err_alloc:
	kfree(d->mask_buf_def);
	kfree(d->mask_buf);
	kfree(d->status_buf);
	kfree(d);
	return ret;
	}
	EXPORT_SYMBOL_GPL(regmap_add_irq_chip);

	/**
	* regmap_del_irq_chip(): Stop interrupt handling for a regmap IRQ chip
	*
	* @irq: Primary IRQ for the device
	* @d: regmap_irq_chip_data allocated by regmap_add_irq_chip()
	*/
	void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *d)
	{
	if (!d)
	return;

	free_irq(irq, d);
	/* We should unmap the domain but... */
	kfree(d->mask_buf_def);
	kfree(d->mask_buf);
	kfree(d->status_buf);
	kfree(d);
	}
	EXPORT_SYMBOL_GPL(regmap_del_irq_chip);

	/**
	* regmap_irq_chip_get_base(): Retrieve interrupt base for a regmap IRQ chip
	*
	* Useful for drivers to request their own IRQs.
	*
	* @data: regmap_irq controller to operate on.
	*/
	int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data)
	{
	WARN_ON(!data->irq_base);
	return data->irq_base;
	}
	EXPORT_SYMBOL_GPL(regmap_irq_chip_get_base);

	/**
	* regmap_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
	*
	* Useful for drivers to request their own IRQs.
	*
	* @data: regmap_irq controller to operate on.
	* @irq: index of the interrupt requested in the chip IRQs
	*/
	int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
	{
	return irq_create_mapping(data->domain, irq);
	}
	EXPORT_SYMBOL_GPL(regmap_irq_get_virq);