[PATCH] drivers/net: fix-up schedule_timeout() usage
Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index ebc20d9..bd99c26 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1029,8 +1029,7 @@
if (!(cpr8(Cmd) & CmdReset))
return;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
}
printk(KERN_ERR "%s: hardware reset timeout\n", cp->dev->name);
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index cf0ac6f..b71fab6 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -2517,10 +2517,8 @@
do {
if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
if (time_after_eq(jiffies, time)) /* no signal->no logout */
@@ -2536,10 +2534,8 @@
do {
if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
#ifdef HP100_DEBUG
@@ -2577,10 +2573,8 @@
do {
if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */
@@ -2591,10 +2585,8 @@
do {
if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
if (time_before_eq(time, jiffies)) {
@@ -2606,10 +2598,8 @@
time = jiffies + (2 * HZ); /* This seems to take a while.... */
do {
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
return 0;
@@ -2659,10 +2649,8 @@
do {
if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST))
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
/* Start an addressed training and optionally request promiscuous port */
@@ -2697,10 +2685,8 @@
do {
if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST)
break;
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_before(jiffies, time));
if (time_after_eq(jiffies, time)) {
@@ -2723,10 +2709,8 @@
#endif
break;
}
- if (!in_interrupt()) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ if (!in_interrupt())
+ schedule_timeout_interruptible(1);
} while (time_after(time, jiffies));
}
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 15f2073..3961a75 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -678,10 +678,9 @@
return;
ticks = us / (1000000 / HZ);
- if (ticks > 0) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1 + ticks);
- } else
+ if (ticks > 0)
+ schedule_timeout_interruptible(1 + ticks);
+ else
udelay(us);
}
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 319ee4c..04e4718 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -645,11 +645,10 @@
mod_timer(&adapter->blink_timer, jiffies);
- set_current_state(TASK_INTERRUPTIBLE);
- if(data)
- schedule_timeout(data * HZ);
+ if (data)
+ schedule_timeout_interruptible(data * HZ);
else
- schedule_timeout(MAX_SCHEDULE_TIMEOUT);
+ schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
del_timer_sync(&adapter->blink_timer);
ixgb_led_off(&adapter->hw);
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index e64df4d..ed72a23 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1632,8 +1632,7 @@
timed_out = 1;
break;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
}
if (status & fail)
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index e7b0010..8154bbb 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -318,7 +318,7 @@
if (dev->base_addr) {
outb(0,dev->base_addr+ADAPTRESET);
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
outb(0,dev->base_addr+ADAPTRESETREL);
}
@@ -859,8 +859,7 @@
writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN);
outb(0, PIOaddr + ADAPTRESET);
- current->state=TASK_UNINTERRUPTIBLE;
- schedule_timeout(TR_RST_TIME); /* wait 50ms */
+ schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */
outb(0, PIOaddr + ADAPTRESETREL);
#ifdef ENABLE_PAGING
@@ -908,8 +907,8 @@
DPRINTK("Adapter is up and running\n");
return 0;
}
- current->state=TASK_INTERRUPTIBLE;
- i=schedule_timeout(TR_RETRY_INTERVAL); /* wait 30 seconds */
+ i=schedule_timeout_interruptible(TR_RETRY_INTERVAL);
+ /* wait 30 seconds */
if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */
}
outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 9e79231..05477d2 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -1101,7 +1101,7 @@
while(olympic_priv->srb_queued) {
- t = schedule_timeout(60*HZ);
+ t = schedule_timeout_interruptible(60*HZ);
if(signal_pending(current)) {
printk(KERN_WARNING "%s: SRB timed out.\n",dev->name);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 2e39bf1..c192559 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -1243,8 +1243,7 @@
tmp = jiffies + time/(1000000/HZ);
do {
- current->state = TASK_INTERRUPTIBLE;
- tmp = schedule_timeout(tmp);
+ tmp = schedule_timeout_interruptible(tmp);
} while(time_after(tmp, jiffies));
#else
udelay(time);
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index ecfa6f8..4c76cb7 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -419,10 +419,9 @@
TYPHOON_STATUS_WAITING_FOR_HOST)
goto out;
- if(wait_type == WaitSleep) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
- } else
+ if(wait_type == WaitSleep)
+ schedule_timeout_uninterruptible(1);
+ else
udelay(TYPHOON_UDELAY);
}
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 7ff814f..ae9e897 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -1617,8 +1617,7 @@
return r;
}
/* sleep if not ready to read */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
}
printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
cosa_getstatus(cosa));
@@ -1644,8 +1643,7 @@
}
#if 0
/* sleep if not ready to read */
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
#endif
}
printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 520a77a..0c1ab4a 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -542,8 +542,7 @@
msg, i);
goto done;
}
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
rmb();
} while (++i > 0);
printk(KERN_ERR "%s: %s timeout\n", dev->name, msg);
@@ -588,8 +587,7 @@
(dpriv->iqtx[cur] & Xpr))
break;
smp_rmb();
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
} while (++i > 0);
return (i >= 0 ) ? i : -EAGAIN;
@@ -1035,8 +1033,7 @@
/* Flush posted writes */
readl(ioaddr + GSTAR);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout_uninterruptible(10);
for (i = 0; i < 16; i++)
pci_write_config_dword(pdev, i << 2, dscc4_pci_config_store[i]);
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index 2c83cca..10befb0 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -980,8 +980,7 @@
/* Wait for any previous command to complete */
while (mbval > NAK) {
spin_unlock_irqrestore(&card->card_lock, flags);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
spin_lock_irqsave(&card->card_lock, flags);
if (++safety > 2000) {
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index 2414e64..e5cdb5b 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -800,8 +800,7 @@
* doesn't seem to have as many firmware restart cycles...
*
* As a test, we're sticking in a 1/100s delay here */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HZ / 100);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(10));
return 0;
@@ -1256,8 +1255,7 @@
IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
i = 5000;
do {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(40 * HZ / 1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(40));
/* Todo... wait for sync command ... */
read_register(priv->net_dev, IPW_REG_INTA, &inta);
@@ -1411,8 +1409,7 @@
(val2 & IPW2100_COMMAND_PHY_OFF))
return 0;
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
+ schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
}
return -EIO;
@@ -1466,7 +1463,7 @@
static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
{
-#define HW_POWER_DOWN_DELAY (HZ / 10)
+#define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
struct host_command cmd = {
.host_command = HOST_PRE_POWER_DOWN,
@@ -1520,10 +1517,8 @@
printk(KERN_WARNING DRV_NAME ": "
"%s: Power down command failed: Error %d\n",
priv->net_dev->name, err);
- else {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(HW_POWER_DOWN_DELAY);
- }
+ else
+ schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
}
priv->status &= ~STATUS_ENABLED;
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 6f13d4a..10cce51 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -439,8 +439,7 @@
wmb();
/* wait a while for the device to reset */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(50*HZ/1000);
+ schedule_timeout_uninterruptible(msecs_to_jiffies(50));
return 0;
}
@@ -491,8 +490,7 @@
/* The software reset acknowledge needs about 220 msec here.
* Be conservative and wait for up to one second. */
- set_current_state(TASK_UNINTERRUPTIBLE);
- remaining = schedule_timeout(HZ);
+ remaining = schedule_timeout_uninterruptible(HZ);
if(remaining > 0) {
result = 0;
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
index b6f2e5a..4937a5a 100644
--- a/drivers/net/wireless/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -455,7 +455,7 @@
struct islpci_mgmtframe **recvframe)
{
islpci_private *priv = netdev_priv(ndev);
- const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000;
+ const long wait_cycle_jiffies = msecs_to_jiffies(ISL38XX_WAIT_CYCLE * 10);
long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies;
int err;
DEFINE_WAIT(wait);
@@ -475,8 +475,7 @@
int timeleft;
struct islpci_mgmtframe *frame;
- set_current_state(TASK_UNINTERRUPTIBLE);
- timeleft = schedule_timeout(wait_cycle_jiffies);
+ timeleft = schedule_timeout_uninterruptible(wait_cycle_jiffies);
frame = xchg(&priv->mgmt_received, NULL);
if (frame) {
if (frame->header->oid == oid) {