Merge of 'docs' branch from
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S
index d360405..b61572e 100644
--- a/arch/ppc64/kernel/entry.S
+++ b/arch/ppc64/kernel/entry.S
@@ -436,15 +436,6 @@
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
-#ifdef CONFIG_PPC_ISERIES
- clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */
- ld r7,TI_FLAGS(r7) /* Get run light flag */
- mfspr r9,CTRLF
- srdi r7,r7,TIF_RUN_LIGHT
- insrdi r9,r7,1,63 /* Insert run light into CTRL */
- mtspr CTRLT,r9
-#endif
-
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 92a744c..346dbf6 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -626,10 +626,10 @@
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
cmpwi 0,r24,0 /* Are we processor 0? */
beq .__start_initialization_iSeries /* Start up the first processor */
- mfspr r4,CTRLF
- li r5,RUNLATCH /* Turn off the run light */
+ mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
andc r4,r4,r5
- mtspr CTRLT,r4
+ mtspr SPRN_CTRLT,r4
1:
HMT_LOW
@@ -2082,9 +2082,9 @@
mfspr r4, HID0
ori r4, r4, 0x1
mtspr HID0, r4
- mfspr r4, CTRLF
+ mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
- mtspr CTRLT, r4
+ mtspr SPRN_CTRLT, r4
blr
#endif
diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c
index da20120..6d06eb5 100644
--- a/arch/ppc64/kernel/iSeries_setup.c
+++ b/arch/ppc64/kernel/iSeries_setup.c
@@ -852,6 +852,28 @@
late_initcall(iSeries_src_init);
+static int set_spread_lpevents(char *str)
+{
+ unsigned long i;
+ unsigned long val = simple_strtoul(str, NULL, 0);
+
+ /*
+ * The parameter is the number of processors to share in processing
+ * lp events.
+ */
+ if (( val > 0) && (val <= NR_CPUS)) {
+ for (i = 1; i < val; ++i)
+ paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
+
+ printk("lpevent processing spread over %ld processors\n", val);
+ } else {
+ printk("invalid spread_lpevents %ld\n", val);
+ }
+
+ return 1;
+}
+__setup("spread_lpevents=", set_spread_lpevents);
+
void __init iSeries_early_setup(void)
{
iSeries_fixup_klimit();
diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
index 6abc621..f24ce2b 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/ppc64/kernel/idle.c
@@ -75,13 +75,9 @@
{
struct paca_struct *lpaca;
long oldval;
- unsigned long CTRL;
/* ensure iSeries run light will be out when idle */
- clear_thread_flag(TIF_RUN_LIGHT);
- CTRL = mfspr(CTRLF);
- CTRL &= ~RUNLATCH;
- mtspr(CTRLT, CTRL);
+ ppc64_runlatch_off();
lpaca = get_paca();
@@ -111,7 +107,9 @@
}
}
+ ppc64_runlatch_on();
schedule();
+ ppc64_runlatch_off();
}
return 0;
diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c
index 8b06861..cdfecbe 100644
--- a/arch/ppc64/kernel/process.c
+++ b/arch/ppc64/kernel/process.c
@@ -378,9 +378,6 @@
childregs->gpr[1] = sp + sizeof(struct pt_regs);
p->thread.regs = NULL; /* no user register state */
clear_ti_thread_flag(p->thread_info, TIF_32BIT);
-#ifdef CONFIG_PPC_ISERIES
- set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
-#endif
} else {
childregs->gpr[1] = usp;
p->thread.regs = childregs;
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 21c57f5..dce198d 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -103,11 +103,6 @@
extern void smp_release_cpus(void);
-unsigned long decr_overclock = 1;
-unsigned long decr_overclock_proc0 = 1;
-unsigned long decr_overclock_set = 0;
-unsigned long decr_overclock_proc0_set = 0;
-
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@@ -1120,64 +1115,15 @@
printk("[dump]%04x %s\n", src, msg);
}
-int set_spread_lpevents( char * str )
-{
- /* The parameter is the number of processors to share in processing lp events */
- unsigned long i;
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val > 0 ) && ( val <= NR_CPUS ) ) {
- for ( i=1; i<val; ++i )
- paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
- printk("lpevent processing spread over %ld processors\n", val);
- }
- else
- printk("invalid spreaqd_lpevents %ld\n", val);
- return 1;
-}
-
/* This should only be called on processor 0 during calibrate decr */
void setup_default_decr(void)
{
struct paca_struct *lpaca = get_paca();
- if ( decr_overclock_set && !decr_overclock_proc0_set )
- decr_overclock_proc0 = decr_overclock;
-
- lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0;
+ lpaca->default_decr = tb_ticks_per_jiffy;
lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
}
-int set_decr_overclock_proc0( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_proc0_set = 1;
- decr_overclock_proc0 = val;
- printk("proc 0 decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid proc 0 decrementer overclock factor of %ld\n", val);
- return 1;
-}
-
-int set_decr_overclock( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_set = 1;
- decr_overclock = val;
- printk("decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid decrementer overclock factor of %ld\n", val);
- return 1;
-
-}
-
-__setup("spread_lpevents=", set_spread_lpevents );
-__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
-__setup("decr_overclock=", set_decr_overclock );
-
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.
diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c
index 3b906cd..9ef5d36 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/ppc64/kernel/smp.c
@@ -334,7 +334,6 @@
}
}
-extern unsigned long decr_overclock;
extern struct gettimeofday_struct do_gtod;
struct thread_info *current_set[NR_CPUS];
@@ -491,7 +490,7 @@
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
- paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock;
+ paca[cpu].default_decr = tb_ticks_per_jiffy;
if (!cpu_has_feature(CPU_FTR_SLB)) {
void *tmp;
diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c
index 0925694..c8fa656 100644
--- a/arch/ppc64/kernel/sysfs.c
+++ b/arch/ppc64/kernel/sysfs.c
@@ -113,7 +113,6 @@
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
int ret;
- unsigned int ctrl;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
@@ -167,11 +166,8 @@
* On SMT machines we have to set the run latch in the ctrl register
* in order to make PMC6 spin.
*/
- if (cpu_has_feature(CPU_FTR_SMT)) {
- ctrl = mfspr(CTRLF);
- ctrl |= RUNLATCH;
- mtspr(CTRLT, ctrl);
- }
+ if (cpu_has_feature(CPU_FTR_SMT))
+ ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1c563f9..a7f15d9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -374,29 +374,6 @@
}
/* --------------------------------------------------------------------- */
-/*
- * high performance HDLC encoder
- * yes, it's ugly, but generates pretty good code
- */
-
-#define ENCODEITERA(j) \
-({ \
- if (!(notbitstream & (0x1f0 << j))) \
- goto stuff##j; \
- encodeend##j: ; \
-})
-
-#define ENCODEITERB(j) \
-({ \
- stuff##j: \
- bitstream &= ~(0x100 << j); \
- bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \
- ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \
- numbit++; \
- notbitstream = ~bitstream; \
- goto encodeend##j; \
-})
-
static void encode_hdlc(struct baycom_state *bc)
{
@@ -405,6 +382,7 @@
int pkt_len;
unsigned bitstream, notbitstream, bitbuf, numbit, crc;
unsigned char crcarr[2];
+ int j;
if (bc->hdlctx.bufcnt > 0)
return;
@@ -429,24 +407,14 @@
pkt_len--;
if (!pkt_len)
bp = crcarr;
- ENCODEITERA(0);
- ENCODEITERA(1);
- ENCODEITERA(2);
- ENCODEITERA(3);
- ENCODEITERA(4);
- ENCODEITERA(5);
- ENCODEITERA(6);
- ENCODEITERA(7);
- goto enditer;
- ENCODEITERB(0);
- ENCODEITERB(1);
- ENCODEITERB(2);
- ENCODEITERB(3);
- ENCODEITERB(4);
- ENCODEITERB(5);
- ENCODEITERB(6);
- ENCODEITERB(7);
- enditer:
+ for (j = 0; j < 8; j++)
+ if (unlikely(!(notbitstream & (0x1f0 << j)))) {
+ bitstream &= ~(0x100 << j);
+ bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
+ ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
+ numbit++;
+ notbitstream = ~bitstream;
+ }
numbit += 8;
while (numbit >= 8) {
*wp++ = bitbuf;
@@ -610,37 +578,6 @@
bc->stats.rx_packets++;
}
-#define DECODEITERA(j) \
-({ \
- if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \
- goto flgabrt##j; \
- if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \
- goto stuff##j; \
- enditer##j: ; \
-})
-
-#define DECODEITERB(j) \
-({ \
- flgabrt##j: \
- if (!(notbitstream & (0x1fc << j))) { /* abort received */ \
- state = 0; \
- goto enditer##j; \
- } \
- if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \
- goto enditer##j; \
- if (state) \
- do_rxpacket(dev); \
- bc->hdlcrx.bufcnt = 0; \
- bc->hdlcrx.bufptr = bc->hdlcrx.buf; \
- state = 1; \
- numbits = 7-j; \
- goto enditer##j; \
- stuff##j: \
- numbits--; \
- bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \
- goto enditer##j; \
-})
-
static int receive(struct net_device *dev, int cnt)
{
struct baycom_state *bc = netdev_priv(dev);
@@ -649,6 +586,7 @@
unsigned char tmp[128];
unsigned char *cp;
int cnt2, ret = 0;
+ int j;
numbits = bc->hdlcrx.numbits;
state = bc->hdlcrx.state;
@@ -669,24 +607,32 @@
bitbuf |= (*cp) << 8;
numbits += 8;
notbitstream = ~bitstream;
- DECODEITERA(0);
- DECODEITERA(1);
- DECODEITERA(2);
- DECODEITERA(3);
- DECODEITERA(4);
- DECODEITERA(5);
- DECODEITERA(6);
- DECODEITERA(7);
- goto enddec;
- DECODEITERB(0);
- DECODEITERB(1);
- DECODEITERB(2);
- DECODEITERB(3);
- DECODEITERB(4);
- DECODEITERB(5);
- DECODEITERB(6);
- DECODEITERB(7);
- enddec:
+ for (j = 0; j < 8; j++) {
+
+ /* flag or abort */
+ if (unlikely(!(notbitstream & (0x0fc << j)))) {
+
+ /* abort received */
+ if (!(notbitstream & (0x1fc << j)))
+ state = 0;
+
+ /* not flag received */
+ else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+ if (state)
+ do_rxpacket(dev);
+ bc->hdlcrx.bufcnt = 0;
+ bc->hdlcrx.bufptr = bc->hdlcrx.buf;
+ state = 1;
+ numbits = 7-j;
+ }
+ }
+
+ /* stuffed bit */
+ else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
+ numbits--;
+ bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
+ }
+ }
while (state && numbits >= 8) {
if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
state = 0;
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 98d8304..5a97e34 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -188,7 +188,6 @@
} else {
jbd_unlock_bh_state(bh);
}
- jh = next_jh;
} while (jh != last_jh);
return ret;
@@ -339,8 +338,10 @@
}
} while (jh != last_jh && !retry);
- if (batch_count)
+ if (batch_count) {
__flush_batch(journal, bhs, &batch_count);
+ retry = 1;
+ }
/*
* If someone cleaned up this transaction while we slept, we're
diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h
index 0035efe..809c634b 100644
--- a/include/asm-ppc64/processor.h
+++ b/include/asm-ppc64/processor.h
@@ -120,103 +120,18 @@
/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define DABR_TRANSLATION (1UL << 2)
#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define DBCR_EDM 0x80000000
-#define DBCR_IDM 0x40000000
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
-#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
-#define DBCR_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
-#define SPRN_EAR 0x11A /* External Address Register */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCI (1<<10) /* Data Cache Invalidate */
-#define HID0_SPD (1<<9) /* Speculative disable */
-#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
-#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
@@ -225,23 +140,8 @@
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_TSC 0x3FD /* Thread switch control */
#define SPRN_TST 0x3FC /* Thread switch timeout */
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-#define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */
@@ -249,9 +149,6 @@
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SGR_NORMAL 0
-#define SGR_GUARDED 1
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
@@ -264,50 +161,12 @@
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */
#define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-#define THRM1_TIN (1<<0)
-#define THRM1_TIV (1<<1)
-#define THRM1_THRES (0x7f<<2)
-#define THRM1_TID (1<<29)
-#define THRM1_TIE (1<<30)
-#define THRM1_V (1<<31)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<31)
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
#define SPRN_VRSAVE 0x100 /* Vector save */
+#define SPRN_CTRLF 0x088
+#define SPRN_CTRLT 0x098
+#define CTRL_RUNLATCH 0x1
/* Performance monitor SPRs */
#define SPRN_SIAR 780
@@ -352,28 +211,19 @@
#define CTR SPRN_CTR /* Counter Register */
#define DAR SPRN_DAR /* Data Address Register */
#define DABR SPRN_DABR /* Data Address Breakpoint Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
-#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
-#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
#define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */
#define NIADORM SPRN_NIADORM /* NIA Dormant Register */
#define TSC SPRN_TSC /* Thread switch control */
#define TST SPRN_TST /* Thread switch timeout */
#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
-#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
-#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define __LR SPRN_LR
#define PVR SPRN_PVR /* Processor Version */
#define PIR SPRN_PIR /* Processor ID */
#define PURR SPRN_PURR /* Processor Utilization of Resource Register */
-//#define RPA SPRN_RPA /* Required Physical Address Register */
#define SDR1 SPRN_SDR1 /* MMU hash base register */
#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
#define SPR1 SPRN_SPRG1
@@ -389,10 +239,6 @@
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
-#define ICTC 1019
-#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
-#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
-#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
#define XER SPRN_XER
/* Processor Version Register (PVR) field extraction */
@@ -436,12 +282,6 @@
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
-/* iSeries CTRL register (for runlatch) */
-
-#define CTRLT 0x098
-#define CTRLF 0x088
-#define RUNLATCH 0x0001
-
#ifdef __ASSEMBLY__
#define _GLOBAL(name) \
@@ -656,6 +496,24 @@
#define HAVE_ARCH_PICK_MMAP_LAYOUT
+static inline void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
+static inline void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h
index 037b5e0..48b7900 100644
--- a/include/asm-ppc64/thread_info.h
+++ b/include/asm-ppc64/thread_info.h
@@ -96,7 +96,7 @@
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-#define TIF_RUN_LIGHT 6 /* iSeries run light */
+/* #define SPARE 6 */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
@@ -110,7 +110,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-#define _TIF_RUN_LIGHT (1<<TIF_RUN_LIGHT)
+/* #define _SPARE (1<<SPARE) */
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)