NetXen: Use multiple PCI functions
NetXen: Make driver use multiple PCI functions.
This patch will make NetXen driver work with multiple PCI functions. This will
make the usage of memory resources as well as interrupts more independent
among different functions which results in better throughput. This change has
been done after the multiport support is added in firmware.
Signed-off by: Mithlesh Thukral <mithlesh@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index d5d9507..f6befc3 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -610,13 +610,12 @@
* Set the station MAC address.
* Note that the passed-in value must already be in network byte order.
*/
-int netxen_niu_macaddr_set(struct netxen_port *port,
+int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t addr)
{
u8 temp[4];
u32 val;
- struct netxen_adapter *adapter = port->adapter;
- int phy = port->portnum;
+ int phy = adapter->portnum;
unsigned char mac_addr[6];
int i;
@@ -642,7 +641,7 @@
if (i == 10) {
printk(KERN_ERR "%s: cannot set Mac addr for %s\n",
- netxen_nic_driver_name, port->netdev->name);
+ netxen_nic_driver_name, adapter->netdev->name);
printk(KERN_ERR "MAC address set: "
"%02x:%02x:%02x:%02x:%02x:%02x.\n",
addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
@@ -735,12 +734,10 @@
}
/* Disable a GbE interface */
-int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter, int port)
+int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg0;
-
- if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
- return -EINVAL;
+ int port = adapter->portnum;
mac_cfg0 = 0;
netxen_gb_soft_reset(mac_cfg0);
@@ -751,13 +748,10 @@
}
/* Disable an XG interface */
-int netxen_niu_disable_xg_port(struct netxen_adapter *adapter, int port)
+int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
{
__u32 mac_cfg;
- if (port != 0)
- return -EINVAL;
-
mac_cfg = 0;
netxen_xg_soft_reset(mac_cfg);
if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_CONFIG_0,
@@ -767,10 +761,11 @@
}
/* Set promiscuous mode for a GbE interface */
-int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int port,
+int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
netxen_niu_prom_mode_t mode)
{
__u32 reg;
+ int port = adapter->portnum;
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
return -EINVAL;
@@ -824,12 +819,11 @@
* Set the MAC address for an XG port
* Note that the passed-in value must already be in network byte order.
*/
-int netxen_niu_xg_macaddr_set(struct netxen_port *port,
+int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
netxen_ethernet_macaddr_t addr)
{
u8 temp[4];
u32 val;
- struct netxen_adapter *adapter = port->adapter;
temp[0] = temp[1] = 0;
memcpy(temp + 2, addr, 2);
@@ -878,9 +872,10 @@
}
int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
- int port, netxen_niu_prom_mode_t mode)
+ netxen_niu_prom_mode_t mode)
{
__u32 reg;
+ int port = adapter->portnum;
if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
return -EINVAL;