ARM: dts: msm: Add device tree support for sdm710
Add device tree support for all variants for sdm710.
Also add device tree overlay support.
Change-Id: I403d01d20a281a275292eced7af5ee2a4dc67d50
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm710-qrd-sku2-overlay.dts b/arch/arm64/boot/dts/qcom/sdm710-qrd-sku2-overlay.dts
new file mode 100644
index 0000000..ab3ce4d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm710-qrd-sku2-overlay.dts
@@ -0,0 +1,51 @@
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,camcc-sdm845.h>
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "sdm670-qrd.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDM710 PM660 + PM660L QRD SKU2";
+ compatible = "qcom,sdm670-qrd", "qcom,sdm670", "qcom,qrd";
+ qcom,msm-id = <360 0x0>;
+ qcom,board-id = <0x0012000b 0>;
+ qcom,pmic-id = <0x0001001b 0x0101011a 0x0 0x0>,
+ <0x0001001b 0x0102001a 0x0 0x0>,
+ <0x0001001b 0x0201011a 0x0 0x0>;
+};
+
+&dsi_dual_nt36850_truly_cmd_display {
+ /delete-property/ qcom,dsi-display-active;
+};
+
+&dsi_hx8399_truly_cmd {
+ qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
+ qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
+ qcom,mdss-dsi-bl-min-level = <1>;
+ qcom,mdss-dsi-bl-max-level = <4095>;
+ qcom,panel-mode-gpio = <&tlmm 76 0>;
+ qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
+ qcom,platform-reset-gpio = <&tlmm 75 0>;
+ qcom,platform-te-gpio = <&tlmm 10 0>;
+};
+
+&dsi_hx8399_truly_cmd_display {
+ qcom,dsi-display-active;
+};