powerpc/512x: clk: support MPC5121/5123/5125 SoC variants
improve the common clock support code for MPC512x
- expand the CCM register set declaration with MPC5125 related registers
(which reside in the previously "reserved" area)
- tell the MPC5121, MPC5123, and MPC5125 SoC variants apart, and derive
the availability of components and their clocks from the detected SoC
(MBX, AXE, VIU, SPDIF, PATA, SATA, PCI, second FEC, second SDHC,
number of PSC components, type of NAND flash controller,
interpretation of the CPMF bitfield, PSC/CAN mux0 stage input clocks,
output clocks on SoC pins)
- add backwards compatibility (allow operation against a device tree
which lacks clock related specs) for MPC5125 FECs, too
telling SoC variants apart and adjusting the clock tree's generation
occurs at runtime, a common generic binary supports all of the chips
the MPC5125 approach to the NFC clock (one register with two counters
for the high and low periods of the clock) is not implemented, as there
are no users and there is no common implementation which supports this
kind of clock -- the new implementation would be unused and could not
get verified, so it shall wait until there is demand
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
diff --git a/include/dt-bindings/clock/mpc512x-clock.h b/include/dt-bindings/clock/mpc512x-clock.h
index 9e81b3b..4f94919 100644
--- a/include/dt-bindings/clock/mpc512x-clock.h
+++ b/include/dt-bindings/clock/mpc512x-clock.h
@@ -63,7 +63,14 @@
#define MPC512x_CLK_PSC9 55
#define MPC512x_CLK_PSC10 56
#define MPC512x_CLK_PSC11 57
+#define MPC512x_CLK_SDHC2 58
+#define MPC512x_CLK_FEC2 59
+#define MPC512x_CLK_OUT0_CLK 60
+#define MPC512x_CLK_OUT1_CLK 61
+#define MPC512x_CLK_OUT2_CLK 62
+#define MPC512x_CLK_OUT3_CLK 63
+#define MPC512x_CLK_CAN_CLK_IN 64
-#define MPC512x_CLK_LAST_PUBLIC 57
+#define MPC512x_CLK_LAST_PUBLIC 64
#endif