pcf50633: introduces battery charging current control
Implement a new sysfs attribute to allow changing MBC charging limit on
the fly independently of usb current limit. It also gets set
automatically every time usb current limit is changed.
Limiting charging current also prevents violating USB specification in
the case when the whole device is shut down and usb current limit is
reset to the factory default by the pcf50633 state transition.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index 48e92c0..21b6e64 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -48,16 +48,21 @@
u8 bits;
int charging_start = 1;
u8 mbcs2, chgmod;
+ unsigned int mbcc5;
- if (ma >= 1000)
+ if (ma >= 1000) {
bits = PCF50633_MBCC7_USB_1000mA;
- else if (ma >= 500)
+ ma = 1000;
+ } else if (ma >= 500) {
bits = PCF50633_MBCC7_USB_500mA;
- else if (ma >= 100)
+ ma = 500;
+ } else if (ma >= 100) {
bits = PCF50633_MBCC7_USB_100mA;
- else {
+ ma = 100;
+ } else {
bits = PCF50633_MBCC7_USB_SUSPEND;
charging_start = 0;
+ ma = 0;
}
ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
@@ -67,7 +72,24 @@
else
dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
- /* Manual charging start */
+ /*
+ * We limit the charging current to be the USB current limit.
+ * The reason is that on pcf50633, when it enters PMU Standby mode,
+ * which it does when the device goes "off", the USB current limit
+ * reverts to the variant default. In at least one common case, that
+ * default is 500mA. By setting the charging current to be the same
+ * as the USB limit we set here before PMU standby, we enforce it only
+ * using the correct amount of current even when the USB current limit
+ * gets reset to the wrong thing
+ */
+
+ if (mbc->pcf->pdata->charger_reference_current_ma) {
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+ }
+
mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
@@ -157,9 +179,55 @@
static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+static ssize_t
+show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
+ unsigned int ma;
+
+ if (!mbc->pcf->pdata->charger_reference_current_ma)
+ return -ENODEV;
+
+ ma = (mbc->pcf->pdata->charger_reference_current_ma * mbcc5) >> 8;
+
+ return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_chglim(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ unsigned long ma;
+ unsigned int mbcc5;
+ int ret;
+
+ if (!mbc->pcf->pdata->charger_reference_current_ma)
+ return -ENODEV;
+
+ ret = strict_strtoul(buf, 10, &ma);
+ if (ret)
+ return -EINVAL;
+
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+
+ return count;
+}
+
+/*
+ * This attribute allows to change MBC charging limit on the fly
+ * independently of usb current limit. It also gets set automatically every
+ * time usb current limit is changed.
+ */
+static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
+
static struct attribute *pcf50633_mbc_sysfs_entries[] = {
&dev_attr_chgmode.attr,
&dev_attr_usb_curlim.attr,
+ &dev_attr_chg_curlim.attr,
NULL,
};