| /* |
| * linux/include/linux/clk-provider.h |
| * |
| * Copyright (c) 2010-2011 Jeremy Kerr <jeremy.kerr@canonical.com> |
| * Copyright (C) 2011-2012 Linaro Ltd <mturquette@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #ifndef __LINUX_CLK_PROVIDER_H |
| #define __LINUX_CLK_PROVIDER_H |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| |
| #ifdef CONFIG_COMMON_CLK |
| |
| /* |
| * flags used across common struct clk. these flags should only affect the |
| * top-level framework. custom flags for dealing with hardware specifics |
| * belong in struct clk_foo |
| */ |
| #define CLK_SET_RATE_GATE BIT(0) /* must be gated across rate change */ |
| #define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */ |
| #define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */ |
| #define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */ |
| #define CLK_IS_ROOT BIT(4) /* root clk, has no parent */ |
| #define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */ |
| #define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */ |
| #define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */ |
| #define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */ |
| |
| struct clk_hw; |
| struct clk_core; |
| struct dentry; |
| |
| /** |
| * struct clk_ops - Callback operations for hardware clocks; these are to |
| * be provided by the clock implementation, and will be called by drivers |
| * through the clk_* api. |
| * |
| * @prepare: Prepare the clock for enabling. This must not return until |
| * the clock is fully prepared, and it's safe to call clk_enable. |
| * This callback is intended to allow clock implementations to |
| * do any initialisation that may sleep. Called with |
| * prepare_lock held. |
| * |
| * @unprepare: Release the clock from its prepared state. This will typically |
| * undo any work done in the @prepare callback. Called with |
| * prepare_lock held. |
| * |
| * @is_prepared: Queries the hardware to determine if the clock is prepared. |
| * This function is allowed to sleep. Optional, if this op is not |
| * set then the prepare count will be used. |
| * |
| * @unprepare_unused: Unprepare the clock atomically. Only called from |
| * clk_disable_unused for prepare clocks with special needs. |
| * Called with prepare mutex held. This function may sleep. |
| * |
| * @enable: Enable the clock atomically. This must not return until the |
| * clock is generating a valid clock signal, usable by consumer |
| * devices. Called with enable_lock held. This function must not |
| * sleep. |
| * |
| * @disable: Disable the clock atomically. Called with enable_lock held. |
| * This function must not sleep. |
| * |
| * @is_enabled: Queries the hardware to determine if the clock is enabled. |
| * This function must not sleep. Optional, if this op is not |
| * set then the enable count will be used. |
| * |
| * @disable_unused: Disable the clock atomically. Only called from |
| * clk_disable_unused for gate clocks with special needs. |
| * Called with enable_lock held. This function must not |
| * sleep. |
| * |
| * @recalc_rate Recalculate the rate of this clock, by querying hardware. The |
| * parent rate is an input parameter. It is up to the caller to |
| * ensure that the prepare_mutex is held across this call. |
| * Returns the calculated rate. Optional, but recommended - if |
| * this op is not set then clock rate will be initialized to 0. |
| * |
| * @round_rate: Given a target rate as input, returns the closest rate actually |
| * supported by the clock. The parent rate is an input/output |
| * parameter. |
| * |
| * @determine_rate: Given a target rate as input, returns the closest rate |
| * actually supported by the clock, and optionally the parent clock |
| * that should be used to provide the clock rate. |
| * |
| * @set_parent: Change the input source of this clock; for clocks with multiple |
| * possible parents specify a new parent by passing in the index |
| * as a u8 corresponding to the parent in either the .parent_names |
| * or .parents arrays. This function in affect translates an |
| * array index into the value programmed into the hardware. |
| * Returns 0 on success, -EERROR otherwise. |
| * |
| * @get_parent: Queries the hardware to determine the parent of a clock. The |
| * return value is a u8 which specifies the index corresponding to |
| * the parent clock. This index can be applied to either the |
| * .parent_names or .parents arrays. In short, this function |
| * translates the parent value read from hardware into an array |
| * index. Currently only called when the clock is initialized by |
| * __clk_init. This callback is mandatory for clocks with |
| * multiple parents. It is optional (and unnecessary) for clocks |
| * with 0 or 1 parents. |
| * |
| * @set_rate: Change the rate of this clock. The requested rate is specified |
| * by the second argument, which should typically be the return |
| * of .round_rate call. The third argument gives the parent rate |
| * which is likely helpful for most .set_rate implementation. |
| * Returns 0 on success, -EERROR otherwise. |
| * |
| * @set_rate_and_parent: Change the rate and the parent of this clock. The |
| * requested rate is specified by the second argument, which |
| * should typically be the return of .round_rate call. The |
| * third argument gives the parent rate which is likely helpful |
| * for most .set_rate_and_parent implementation. The fourth |
| * argument gives the parent index. This callback is optional (and |
| * unnecessary) for clocks with 0 or 1 parents as well as |
| * for clocks that can tolerate switching the rate and the parent |
| * separately via calls to .set_parent and .set_rate. |
| * Returns 0 on success, -EERROR otherwise. |
| * |
| * @recalc_accuracy: Recalculate the accuracy of this clock. The clock accuracy |
| * is expressed in ppb (parts per billion). The parent accuracy is |
| * an input parameter. |
| * Returns the calculated accuracy. Optional - if this op is not |
| * set then clock accuracy will be initialized to parent accuracy |
| * or 0 (perfect clock) if clock has no parent. |
| * |
| * @get_phase: Queries the hardware to get the current phase of a clock. |
| * Returned values are 0-359 degrees on success, negative |
| * error codes on failure. |
| * |
| * @set_phase: Shift the phase this clock signal in degrees specified |
| * by the second argument. Valid values for degrees are |
| * 0-359. Return 0 on success, otherwise -EERROR. |
| * |
| * @init: Perform platform-specific initialization magic. |
| * This is not not used by any of the basic clock types. |
| * Please consider other ways of solving initialization problems |
| * before using this callback, as its use is discouraged. |
| * |
| * @debug_init: Set up type-specific debugfs entries for this clock. This |
| * is called once, after the debugfs directory entry for this |
| * clock has been created. The dentry pointer representing that |
| * directory is provided as an argument. Called with |
| * prepare_lock held. Returns 0 on success, -EERROR otherwise. |
| * |
| * |
| * The clk_enable/clk_disable and clk_prepare/clk_unprepare pairs allow |
| * implementations to split any work between atomic (enable) and sleepable |
| * (prepare) contexts. If enabling a clock requires code that might sleep, |
| * this must be done in clk_prepare. Clock enable code that will never be |
| * called in a sleepable context may be implemented in clk_enable. |
| * |
| * Typically, drivers will call clk_prepare when a clock may be needed later |
| * (eg. when a device is opened), and clk_enable when the clock is actually |
| * required (eg. from an interrupt). Note that clk_prepare MUST have been |
| * called before clk_enable. |
| */ |
| struct clk_ops { |
| int (*prepare)(struct clk_hw *hw); |
| void (*unprepare)(struct clk_hw *hw); |
| int (*is_prepared)(struct clk_hw *hw); |
| void (*unprepare_unused)(struct clk_hw *hw); |
| int (*enable)(struct clk_hw *hw); |
| void (*disable)(struct clk_hw *hw); |
| int (*is_enabled)(struct clk_hw *hw); |
| void (*disable_unused)(struct clk_hw *hw); |
| unsigned long (*recalc_rate)(struct clk_hw *hw, |
| unsigned long parent_rate); |
| long (*round_rate)(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate); |
| long (*determine_rate)(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long min_rate, |
| unsigned long max_rate, |
| unsigned long *best_parent_rate, |
| struct clk_hw **best_parent_hw); |
| int (*set_parent)(struct clk_hw *hw, u8 index); |
| u8 (*get_parent)(struct clk_hw *hw); |
| int (*set_rate)(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate); |
| int (*set_rate_and_parent)(struct clk_hw *hw, |
| unsigned long rate, |
| unsigned long parent_rate, u8 index); |
| unsigned long (*recalc_accuracy)(struct clk_hw *hw, |
| unsigned long parent_accuracy); |
| int (*get_phase)(struct clk_hw *hw); |
| int (*set_phase)(struct clk_hw *hw, int degrees); |
| void (*init)(struct clk_hw *hw); |
| int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); |
| }; |
| |
| /** |
| * struct clk_init_data - holds init data that's common to all clocks and is |
| * shared between the clock provider and the common clock framework. |
| * |
| * @name: clock name |
| * @ops: operations this clock supports |
| * @parent_names: array of string names for all possible parents |
| * @num_parents: number of possible parents |
| * @flags: framework-level hints and quirks |
| */ |
| struct clk_init_data { |
| const char *name; |
| const struct clk_ops *ops; |
| const char **parent_names; |
| u8 num_parents; |
| unsigned long flags; |
| }; |
| |
| /** |
| * struct clk_hw - handle for traversing from a struct clk to its corresponding |
| * hardware-specific structure. struct clk_hw should be declared within struct |
| * clk_foo and then referenced by the struct clk instance that uses struct |
| * clk_foo's clk_ops |
| * |
| * @core: pointer to the struct clk_core instance that points back to this |
| * struct clk_hw instance |
| * |
| * @clk: pointer to the per-user struct clk instance that can be used to call |
| * into the clk API |
| * |
| * @init: pointer to struct clk_init_data that contains the init data shared |
| * with the common clock framework. |
| */ |
| struct clk_hw { |
| struct clk_core *core; |
| struct clk *clk; |
| const struct clk_init_data *init; |
| }; |
| |
| /* |
| * DOC: Basic clock implementations common to many platforms |
| * |
| * Each basic clock hardware type is comprised of a structure describing the |
| * clock hardware, implementations of the relevant callbacks in struct clk_ops, |
| * unique flags for that hardware type, a registration function and an |
| * alternative macro for static initialization |
| */ |
| |
| /** |
| * struct clk_fixed_rate - fixed-rate clock |
| * @hw: handle between common and hardware-specific interfaces |
| * @fixed_rate: constant frequency of clock |
| */ |
| struct clk_fixed_rate { |
| struct clk_hw hw; |
| unsigned long fixed_rate; |
| unsigned long fixed_accuracy; |
| u8 flags; |
| }; |
| |
| extern const struct clk_ops clk_fixed_rate_ops; |
| struct clk *clk_register_fixed_rate(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| unsigned long fixed_rate); |
| struct clk *clk_register_fixed_rate_with_accuracy(struct device *dev, |
| const char *name, const char *parent_name, unsigned long flags, |
| unsigned long fixed_rate, unsigned long fixed_accuracy); |
| |
| void of_fixed_clk_setup(struct device_node *np); |
| |
| /** |
| * struct clk_gate - gating clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @reg: register controlling gate |
| * @bit_idx: single bit controlling gate |
| * @flags: hardware-specific flags |
| * @lock: register lock |
| * |
| * Clock which can gate its output. Implements .enable & .disable |
| * |
| * Flags: |
| * CLK_GATE_SET_TO_DISABLE - by default this clock sets the bit at bit_idx to |
| * enable the clock. Setting this flag does the opposite: setting the bit |
| * disable the clock and clearing it enables the clock |
| * CLK_GATE_HIWORD_MASK - The gate settings are only in lower 16-bit |
| * of this register, and mask of gate bits are in higher 16-bit of this |
| * register. While setting the gate bits, higher 16-bit should also be |
| * updated to indicate changing gate bits. |
| */ |
| struct clk_gate { |
| struct clk_hw hw; |
| void __iomem *reg; |
| u8 bit_idx; |
| u8 flags; |
| spinlock_t *lock; |
| }; |
| |
| #define CLK_GATE_SET_TO_DISABLE BIT(0) |
| #define CLK_GATE_HIWORD_MASK BIT(1) |
| |
| extern const struct clk_ops clk_gate_ops; |
| struct clk *clk_register_gate(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 bit_idx, |
| u8 clk_gate_flags, spinlock_t *lock); |
| void clk_unregister_gate(struct clk *clk); |
| |
| struct clk_div_table { |
| unsigned int val; |
| unsigned int div; |
| }; |
| |
| /** |
| * struct clk_divider - adjustable divider clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @reg: register containing the divider |
| * @shift: shift to the divider bit field |
| * @width: width of the divider bit field |
| * @table: array of value/divider pairs, last entry should have div = 0 |
| * @lock: register lock |
| * |
| * Clock with an adjustable divider affecting its output frequency. Implements |
| * .recalc_rate, .set_rate and .round_rate |
| * |
| * Flags: |
| * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the |
| * register plus one. If CLK_DIVIDER_ONE_BASED is set then the divider is |
| * the raw value read from the register, with the value of zero considered |
| * invalid, unless CLK_DIVIDER_ALLOW_ZERO is set. |
| * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from |
| * the hardware register |
| * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors. For dividers which have |
| * CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor. |
| * Some hardware implementations gracefully handle this case and allow a |
| * zero divisor by not modifying their input clock |
| * (divide by one / bypass). |
| * CLK_DIVIDER_HIWORD_MASK - The divider settings are only in lower 16-bit |
| * of this register, and mask of divider bits are in higher 16-bit of this |
| * register. While setting the divider bits, higher 16-bit should also be |
| * updated to indicate changing divider bits. |
| * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded |
| * to the closest integer instead of the up one. |
| * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should |
| * not be changed by the clock framework. |
| */ |
| struct clk_divider { |
| struct clk_hw hw; |
| void __iomem *reg; |
| u8 shift; |
| u8 width; |
| u8 flags; |
| const struct clk_div_table *table; |
| spinlock_t *lock; |
| }; |
| |
| #define CLK_DIVIDER_ONE_BASED BIT(0) |
| #define CLK_DIVIDER_POWER_OF_TWO BIT(1) |
| #define CLK_DIVIDER_ALLOW_ZERO BIT(2) |
| #define CLK_DIVIDER_HIWORD_MASK BIT(3) |
| #define CLK_DIVIDER_ROUND_CLOSEST BIT(4) |
| #define CLK_DIVIDER_READ_ONLY BIT(5) |
| |
| extern const struct clk_ops clk_divider_ops; |
| |
| unsigned long divider_recalc_rate(struct clk_hw *hw, unsigned long parent_rate, |
| unsigned int val, const struct clk_div_table *table, |
| unsigned long flags); |
| long divider_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate, const struct clk_div_table *table, |
| u8 width, unsigned long flags); |
| int divider_get_val(unsigned long rate, unsigned long parent_rate, |
| const struct clk_div_table *table, u8 width, |
| unsigned long flags); |
| |
| struct clk *clk_register_divider(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 shift, u8 width, |
| u8 clk_divider_flags, spinlock_t *lock); |
| struct clk *clk_register_divider_table(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 shift, u8 width, |
| u8 clk_divider_flags, const struct clk_div_table *table, |
| spinlock_t *lock); |
| void clk_unregister_divider(struct clk *clk); |
| |
| /** |
| * struct clk_mux - multiplexer clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @reg: register controlling multiplexer |
| * @shift: shift to multiplexer bit field |
| * @width: width of mutliplexer bit field |
| * @flags: hardware-specific flags |
| * @lock: register lock |
| * |
| * Clock with multiple selectable parents. Implements .get_parent, .set_parent |
| * and .recalc_rate |
| * |
| * Flags: |
| * CLK_MUX_INDEX_ONE - register index starts at 1, not 0 |
| * CLK_MUX_INDEX_BIT - register index is a single bit (power of two) |
| * CLK_MUX_HIWORD_MASK - The mux settings are only in lower 16-bit of this |
| * register, and mask of mux bits are in higher 16-bit of this register. |
| * While setting the mux bits, higher 16-bit should also be updated to |
| * indicate changing mux bits. |
| * CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired |
| * frequency. |
| */ |
| struct clk_mux { |
| struct clk_hw hw; |
| void __iomem *reg; |
| u32 *table; |
| u32 mask; |
| u8 shift; |
| u8 flags; |
| spinlock_t *lock; |
| }; |
| |
| #define CLK_MUX_INDEX_ONE BIT(0) |
| #define CLK_MUX_INDEX_BIT BIT(1) |
| #define CLK_MUX_HIWORD_MASK BIT(2) |
| #define CLK_MUX_READ_ONLY BIT(3) /* mux can't be changed */ |
| #define CLK_MUX_ROUND_CLOSEST BIT(4) |
| |
| extern const struct clk_ops clk_mux_ops; |
| extern const struct clk_ops clk_mux_ro_ops; |
| |
| struct clk *clk_register_mux(struct device *dev, const char *name, |
| const char **parent_names, u8 num_parents, unsigned long flags, |
| void __iomem *reg, u8 shift, u8 width, |
| u8 clk_mux_flags, spinlock_t *lock); |
| |
| struct clk *clk_register_mux_table(struct device *dev, const char *name, |
| const char **parent_names, u8 num_parents, unsigned long flags, |
| void __iomem *reg, u8 shift, u32 mask, |
| u8 clk_mux_flags, u32 *table, spinlock_t *lock); |
| |
| void clk_unregister_mux(struct clk *clk); |
| |
| void of_fixed_factor_clk_setup(struct device_node *node); |
| |
| /** |
| * struct clk_fixed_factor - fixed multiplier and divider clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @mult: multiplier |
| * @div: divider |
| * |
| * Clock with a fixed multiplier and divider. The output frequency is the |
| * parent clock rate divided by div and multiplied by mult. |
| * Implements .recalc_rate, .set_rate and .round_rate |
| */ |
| |
| struct clk_fixed_factor { |
| struct clk_hw hw; |
| unsigned int mult; |
| unsigned int div; |
| }; |
| |
| extern struct clk_ops clk_fixed_factor_ops; |
| struct clk *clk_register_fixed_factor(struct device *dev, const char *name, |
| const char *parent_name, unsigned long flags, |
| unsigned int mult, unsigned int div); |
| |
| /** |
| * struct clk_fractional_divider - adjustable fractional divider clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @reg: register containing the divider |
| * @mshift: shift to the numerator bit field |
| * @mwidth: width of the numerator bit field |
| * @nshift: shift to the denominator bit field |
| * @nwidth: width of the denominator bit field |
| * @lock: register lock |
| * |
| * Clock with adjustable fractional divider affecting its output frequency. |
| */ |
| |
| struct clk_fractional_divider { |
| struct clk_hw hw; |
| void __iomem *reg; |
| u8 mshift; |
| u32 mmask; |
| u8 nshift; |
| u32 nmask; |
| u8 flags; |
| spinlock_t *lock; |
| }; |
| |
| extern const struct clk_ops clk_fractional_divider_ops; |
| struct clk *clk_register_fractional_divider(struct device *dev, |
| const char *name, const char *parent_name, unsigned long flags, |
| void __iomem *reg, u8 mshift, u8 mwidth, u8 nshift, u8 nwidth, |
| u8 clk_divider_flags, spinlock_t *lock); |
| |
| /*** |
| * struct clk_composite - aggregate clock of mux, divider and gate clocks |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @mux_hw: handle between composite and hardware-specific mux clock |
| * @rate_hw: handle between composite and hardware-specific rate clock |
| * @gate_hw: handle between composite and hardware-specific gate clock |
| * @mux_ops: clock ops for mux |
| * @rate_ops: clock ops for rate |
| * @gate_ops: clock ops for gate |
| */ |
| struct clk_composite { |
| struct clk_hw hw; |
| struct clk_ops ops; |
| |
| struct clk_hw *mux_hw; |
| struct clk_hw *rate_hw; |
| struct clk_hw *gate_hw; |
| |
| const struct clk_ops *mux_ops; |
| const struct clk_ops *rate_ops; |
| const struct clk_ops *gate_ops; |
| }; |
| |
| struct clk *clk_register_composite(struct device *dev, const char *name, |
| const char **parent_names, int num_parents, |
| struct clk_hw *mux_hw, const struct clk_ops *mux_ops, |
| struct clk_hw *rate_hw, const struct clk_ops *rate_ops, |
| struct clk_hw *gate_hw, const struct clk_ops *gate_ops, |
| unsigned long flags); |
| |
| /*** |
| * struct clk_gpio_gate - gpio gated clock |
| * |
| * @hw: handle between common and hardware-specific interfaces |
| * @gpiod: gpio descriptor |
| * |
| * Clock with a gpio control for enabling and disabling the parent clock. |
| * Implements .enable, .disable and .is_enabled |
| */ |
| |
| struct clk_gpio { |
| struct clk_hw hw; |
| struct gpio_desc *gpiod; |
| }; |
| |
| extern const struct clk_ops clk_gpio_gate_ops; |
| struct clk *clk_register_gpio_gate(struct device *dev, const char *name, |
| const char *parent_name, unsigned gpio, bool active_low, |
| unsigned long flags); |
| |
| void of_gpio_clk_gate_setup(struct device_node *node); |
| |
| /** |
| * clk_register - allocate a new clock, register it and return an opaque cookie |
| * @dev: device that is registering this clock |
| * @hw: link to hardware-specific clock data |
| * |
| * clk_register is the primary interface for populating the clock tree with new |
| * clock nodes. It returns a pointer to the newly allocated struct clk which |
| * cannot be dereferenced by driver code but may be used in conjuction with the |
| * rest of the clock API. In the event of an error clk_register will return an |
| * error code; drivers must test for an error code after calling clk_register. |
| */ |
| struct clk *clk_register(struct device *dev, struct clk_hw *hw); |
| struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); |
| |
| void clk_unregister(struct clk *clk); |
| void devm_clk_unregister(struct device *dev, struct clk *clk); |
| |
| /* helper functions */ |
| const char *__clk_get_name(struct clk *clk); |
| struct clk_hw *__clk_get_hw(struct clk *clk); |
| u8 __clk_get_num_parents(struct clk *clk); |
| struct clk *__clk_get_parent(struct clk *clk); |
| struct clk *clk_get_parent_by_index(struct clk *clk, u8 index); |
| unsigned int __clk_get_enable_count(struct clk *clk); |
| unsigned long __clk_get_rate(struct clk *clk); |
| unsigned long __clk_get_flags(struct clk *clk); |
| bool __clk_is_prepared(struct clk *clk); |
| bool __clk_is_enabled(struct clk *clk); |
| struct clk *__clk_lookup(const char *name); |
| long __clk_mux_determine_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long min_rate, |
| unsigned long max_rate, |
| unsigned long *best_parent_rate, |
| struct clk_hw **best_parent_p); |
| unsigned long __clk_determine_rate(struct clk_hw *core, |
| unsigned long rate, |
| unsigned long min_rate, |
| unsigned long max_rate); |
| long __clk_mux_determine_rate_closest(struct clk_hw *hw, unsigned long rate, |
| unsigned long min_rate, |
| unsigned long max_rate, |
| unsigned long *best_parent_rate, |
| struct clk_hw **best_parent_p); |
| void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent); |
| |
| static inline void __clk_hw_set_clk(struct clk_hw *dst, struct clk_hw *src) |
| { |
| dst->clk = src->clk; |
| dst->core = src->core; |
| } |
| |
| /* |
| * FIXME clock api without lock protection |
| */ |
| unsigned long __clk_round_rate(struct clk *clk, unsigned long rate); |
| |
| struct of_device_id; |
| |
| typedef void (*of_clk_init_cb_t)(struct device_node *); |
| |
| struct clk_onecell_data { |
| struct clk **clks; |
| unsigned int clk_num; |
| }; |
| |
| extern struct of_device_id __clk_of_table; |
| |
| #define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn) |
| |
| #ifdef CONFIG_OF |
| int of_clk_add_provider(struct device_node *np, |
| struct clk *(*clk_src_get)(struct of_phandle_args *args, |
| void *data), |
| void *data); |
| void of_clk_del_provider(struct device_node *np); |
| struct clk *of_clk_src_simple_get(struct of_phandle_args *clkspec, |
| void *data); |
| struct clk *of_clk_src_onecell_get(struct of_phandle_args *clkspec, void *data); |
| int of_clk_get_parent_count(struct device_node *np); |
| const char *of_clk_get_parent_name(struct device_node *np, int index); |
| |
| void of_clk_init(const struct of_device_id *matches); |
| |
| #else /* !CONFIG_OF */ |
| |
| static inline int of_clk_add_provider(struct device_node *np, |
| struct clk *(*clk_src_get)(struct of_phandle_args *args, |
| void *data), |
| void *data) |
| { |
| return 0; |
| } |
| #define of_clk_del_provider(np) \ |
| { while (0); } |
| static inline struct clk *of_clk_src_simple_get( |
| struct of_phandle_args *clkspec, void *data) |
| { |
| return ERR_PTR(-ENOENT); |
| } |
| static inline struct clk *of_clk_src_onecell_get( |
| struct of_phandle_args *clkspec, void *data) |
| { |
| return ERR_PTR(-ENOENT); |
| } |
| static inline const char *of_clk_get_parent_name(struct device_node *np, |
| int index) |
| { |
| return NULL; |
| } |
| #define of_clk_init(matches) \ |
| { while (0); } |
| #endif /* CONFIG_OF */ |
| |
| /* |
| * wrap access to peripherals in accessor routines |
| * for improved portability across platforms |
| */ |
| |
| #if IS_ENABLED(CONFIG_PPC) |
| |
| static inline u32 clk_readl(u32 __iomem *reg) |
| { |
| return ioread32be(reg); |
| } |
| |
| static inline void clk_writel(u32 val, u32 __iomem *reg) |
| { |
| iowrite32be(val, reg); |
| } |
| |
| #else /* platform dependent I/O accessors */ |
| |
| static inline u32 clk_readl(u32 __iomem *reg) |
| { |
| return readl(reg); |
| } |
| |
| static inline void clk_writel(u32 val, u32 __iomem *reg) |
| { |
| writel(val, reg); |
| } |
| |
| #endif /* platform dependent I/O accessors */ |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct dentry *clk_debugfs_add_file(struct clk_hw *hw, char *name, umode_t mode, |
| void *data, const struct file_operations *fops); |
| #endif |
| |
| #endif /* CONFIG_COMMON_CLK */ |
| #endif /* CLK_PROVIDER_H */ |