| #ifndef _LINUX_VIRTIO_NET_H |
| #define _LINUX_VIRTIO_NET_H |
| /* This header is BSD licensed so anyone can use the definitions to implement |
| * compatible drivers/servers. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of IBM nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. */ |
| #include <linux/types.h> |
| #include <linux/virtio_ids.h> |
| #include <linux/virtio_config.h> |
| #include <linux/if_ether.h> |
| |
| /* The feature bitmap for virtio net */ |
| #define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ |
| #define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ |
| #define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ |
| #define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ |
| #define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ |
| #define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ |
| #define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ |
| #define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ |
| #define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ |
| #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ |
| #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ |
| #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ |
| #define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ |
| #define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ |
| #define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ |
| #define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ |
| #define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ |
| #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ |
| #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the |
| * network */ |
| |
| #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ |
| #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ |
| |
| struct virtio_net_config { |
| /* The config defining mac address (if VIRTIO_NET_F_MAC) */ |
| __u8 mac[6]; |
| /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ |
| __u16 status; |
| } __attribute__((packed)); |
| |
| /* This is the first element of the scatter-gather list. If you don't |
| * specify GSO or CSUM features, you can simply ignore the header. */ |
| struct virtio_net_hdr { |
| #define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 // Use csum_start, csum_offset |
| #define VIRTIO_NET_HDR_F_DATA_VALID 2 // Csum is valid |
| __u8 flags; |
| #define VIRTIO_NET_HDR_GSO_NONE 0 // Not a GSO frame |
| #define VIRTIO_NET_HDR_GSO_TCPV4 1 // GSO frame, IPv4 TCP (TSO) |
| #define VIRTIO_NET_HDR_GSO_UDP 3 // GSO frame, IPv4 UDP (UFO) |
| #define VIRTIO_NET_HDR_GSO_TCPV6 4 // GSO frame, IPv6 TCP |
| #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set |
| __u8 gso_type; |
| __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ |
| __u16 gso_size; /* Bytes to append to hdr_len per frame */ |
| __u16 csum_start; /* Position to start checksumming from */ |
| __u16 csum_offset; /* Offset after that to place checksum */ |
| }; |
| |
| /* This is the version of the header to use when the MRG_RXBUF |
| * feature has been negotiated. */ |
| struct virtio_net_hdr_mrg_rxbuf { |
| struct virtio_net_hdr hdr; |
| __u16 num_buffers; /* Number of merged rx buffers */ |
| }; |
| |
| /* |
| * Control virtqueue data structures |
| * |
| * The control virtqueue expects a header in the first sg entry |
| * and an ack/status response in the last entry. Data for the |
| * command goes in between. |
| */ |
| struct virtio_net_ctrl_hdr { |
| __u8 class; |
| __u8 cmd; |
| } __attribute__((packed)); |
| |
| typedef __u8 virtio_net_ctrl_ack; |
| |
| #define VIRTIO_NET_OK 0 |
| #define VIRTIO_NET_ERR 1 |
| |
| /* |
| * Control the RX mode, ie. promisucous, allmulti, etc... |
| * All commands require an "out" sg entry containing a 1 byte |
| * state value, zero = disable, non-zero = enable. Commands |
| * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. |
| * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. |
| */ |
| #define VIRTIO_NET_CTRL_RX 0 |
| #define VIRTIO_NET_CTRL_RX_PROMISC 0 |
| #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 |
| #define VIRTIO_NET_CTRL_RX_ALLUNI 2 |
| #define VIRTIO_NET_CTRL_RX_NOMULTI 3 |
| #define VIRTIO_NET_CTRL_RX_NOUNI 4 |
| #define VIRTIO_NET_CTRL_RX_NOBCAST 5 |
| |
| /* |
| * Control the MAC filter table. |
| * |
| * The MAC filter table is managed by the hypervisor, the guest should |
| * assume the size is infinite. Filtering should be considered |
| * non-perfect, ie. based on hypervisor resources, the guest may |
| * received packets from sources not specified in the filter list. |
| * |
| * In addition to the class/cmd header, the TABLE_SET command requires |
| * two out scatterlists. Each contains a 4 byte count of entries followed |
| * by a concatenated byte stream of the ETH_ALEN MAC addresses. The |
| * first sg list contains unicast addresses, the second is for multicast. |
| * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature |
| * is available. |
| */ |
| struct virtio_net_ctrl_mac { |
| __u32 entries; |
| __u8 macs[][ETH_ALEN]; |
| } __attribute__((packed)); |
| |
| #define VIRTIO_NET_CTRL_MAC 1 |
| #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 |
| |
| /* |
| * Control VLAN filtering |
| * |
| * The VLAN filter table is controlled via a simple ADD/DEL interface. |
| * VLAN IDs not added may be filterd by the hypervisor. Del is the |
| * opposite of add. Both commands expect an out entry containing a 2 |
| * byte VLAN ID. VLAN filterting is available with the |
| * VIRTIO_NET_F_CTRL_VLAN feature bit. |
| */ |
| #define VIRTIO_NET_CTRL_VLAN 2 |
| #define VIRTIO_NET_CTRL_VLAN_ADD 0 |
| #define VIRTIO_NET_CTRL_VLAN_DEL 1 |
| |
| /* |
| * Control link announce acknowledgement |
| * |
| * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that |
| * driver has recevied the notification; device would clear the |
| * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives |
| * this command. |
| */ |
| #define VIRTIO_NET_CTRL_ANNOUNCE 3 |
| #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 |
| |
| #endif /* _LINUX_VIRTIO_NET_H */ |