diff --git a/arch/i386/kernel/cpu/mcheck/p4.c b/arch/i386/kernel/cpu/mcheck/p4.c
index d83a669..504434a 100644
--- a/arch/i386/kernel/cpu/mcheck/p4.c
+++ b/arch/i386/kernel/cpu/mcheck/p4.c
@@ -115,6 +115,9 @@
 	l = apic_read (APIC_LVTTHMR);
 	apic_write_around (APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 	printk (KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
 	return;
 }
 #endif /* CONFIG_X86_MCE_P4THERMAL */
diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c
index 101f7ac..4f43047 100644
--- a/arch/i386/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c
@@ -1,15 +1,22 @@
 /*
  * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c
  *
- * Thermal throttle event support code.
+ * Thermal throttle event support code (such as syslog messaging and rate
+ * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
+ * This allows consistent reporting of CPU thermal throttle events.
+ *
+ * Maintains a counter in /sys that keeps track of the number of thermal
+ * events, such that the user knows how bad the thermal problem might be
+ * (since the logging to syslog and mcelog is rate limited).
  *
  * Author: Dmitriy Zavin (dmitriyz@google.com)
  *
  * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c.
- *
+ *          Inspired by Ross Biro's and Al Borchers' counter code.
  */
 
 #include <linux/percpu.h>
+#include <linux/sysdev.h>
 #include <linux/cpu.h>
 #include <asm/cpu.h>
 #include <linux/notifier.h>
@@ -18,15 +25,53 @@
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL              (300 * HZ)
 
-static DEFINE_PER_CPU(__u64, next_check);
+static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
+static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
+atomic_t therm_throt_en = ATOMIC_INIT(0);
+
+#ifdef CONFIG_SYSFS
+#define define_therm_throt_sysdev_one_ro(_name)                              \
+        static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
+
+#define define_therm_throt_sysdev_show_func(name)                            \
+static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+                                              char *buf)                     \
+{                                                                            \
+	unsigned int cpu = dev->id;                                          \
+	ssize_t ret;                                                         \
+                                                                             \
+	preempt_disable();              /* CPU hotplug */                    \
+	if (cpu_online(cpu))                                                 \
+		ret = sprintf(buf, "%lu\n",                                  \
+			      per_cpu(thermal_throttle_##name, cpu));        \
+	else                                                                 \
+		ret = 0;                                                     \
+	preempt_enable();                                                    \
+                                                                             \
+	return ret;                                                          \
+}
+
+define_therm_throt_sysdev_show_func(count);
+define_therm_throt_sysdev_one_ro(count);
+
+static struct attribute *thermal_throttle_attrs[] = {
+	&attr_count.attr,
+	NULL
+};
+
+static struct attribute_group thermal_throttle_attr_group = {
+	.attrs = thermal_throttle_attrs,
+	.name = "thermal_throttle"
+};
+#endif /* CONFIG_SYSFS */
 
 /***
- * therm_throt_process - Process thermal throttling event
+ * therm_throt_process - Process thermal throttling event from interrupt
  * @curr: Whether the condition is current or not (boolean), since the
  *        thermal interrupt normally gets called both when the thermal
  *        event begins and once the event has ended.
  *
- * This function is normally called by the thermal interrupt after the
+ * This function is called by the thermal interrupt after the
  * IRQ has been acknowledged.
  *
  * It will take care of rate limiting and printing messages to the syslog.
@@ -41,6 +86,9 @@
 	unsigned int cpu = smp_processor_id();
 	__u64 tmp_jiffs = get_jiffies_64();
 
+	if (curr)
+		__get_cpu_var(thermal_throttle_count)++;
+
 	if (time_before64(tmp_jiffs, __get_cpu_var(next_check)))
 		return 0;
 
@@ -49,7 +97,9 @@
 	/* if we just entered the thermal event */
 	if (curr) {
 		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled\n", cpu);
+		       "cpu clock throttled (total events = %lu)\n", cpu,
+		       __get_cpu_var(thermal_throttle_count));
+
 		add_taint(TAINT_MACHINE_CHECK);
 	} else {
 		printk(KERN_CRIT "CPU%d: Temperature/speed normal\n", cpu);
@@ -57,3 +107,74 @@
 
 	return 1;
 }
+
+#ifdef CONFIG_SYSFS
+/* Add/Remove thermal_throttle interface for CPU device */
+static __cpuinit int thermal_throttle_add_dev(struct sys_device * sys_dev)
+{
+	sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+	return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit int thermal_throttle_remove_dev(struct sys_device * sys_dev)
+{
+	sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
+	return 0;
+}
+
+/* Mutex protecting device creation against CPU hotplug */
+static DEFINE_MUTEX(therm_cpu_lock);
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb,
+						   unsigned long action,
+						   void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	mutex_lock(&therm_cpu_lock);
+	switch (action) {
+	case CPU_ONLINE:
+		thermal_throttle_add_dev(sys_dev);
+		break;
+	case CPU_DEAD:
+		thermal_throttle_remove_dev(sys_dev);
+		break;
+	}
+	mutex_unlock(&therm_cpu_lock);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block thermal_throttle_cpu_notifier =
+{
+	.notifier_call = thermal_throttle_cpu_callback,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static __init int thermal_throttle_init_device(void)
+{
+	unsigned int cpu = 0;
+
+	if (!atomic_read(&therm_throt_en))
+		return 0;
+
+	register_hotcpu_notifier(&thermal_throttle_cpu_notifier);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	mutex_lock(&therm_cpu_lock);
+#endif
+	/* connect live CPUs to sysfs */
+	for_each_online_cpu(cpu)
+		thermal_throttle_add_dev(get_cpu_sysdev(cpu));
+#ifdef CONFIG_HOTPLUG_CPU
+	mutex_unlock(&therm_cpu_lock);
+#endif
+
+	return 0;
+}
+
+device_initcall(thermal_throttle_init_device);
+#endif /* CONFIG_SYSFS */
diff --git a/arch/x86_64/kernel/mce_intel.c b/arch/x86_64/kernel/mce_intel.c
index dec1121..6551505 100644
--- a/arch/x86_64/kernel/mce_intel.c
+++ b/arch/x86_64/kernel/mce_intel.c
@@ -77,6 +77,9 @@
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 	printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
 		cpu, tm2 ? "TM2" : "TM1");
+
+	/* enable thermal throttle processing */
+	atomic_set(&therm_throt_en, 1);
 	return;
 }
 
diff --git a/include/asm-i386/therm_throt.h b/include/asm-i386/therm_throt.h
index 3c9c22c..399bf60 100644
--- a/include/asm-i386/therm_throt.h
+++ b/include/asm-i386/therm_throt.h
@@ -1,6 +1,9 @@
 #ifndef __ASM_I386_THERM_THROT_H__
 #define __ASM_I386_THERM_THROT_H__ 1
 
+#include <asm/atomic.h>
+
+extern atomic_t therm_throt_en;
 int therm_throt_process(int curr);
 
 #endif /* __ASM_I386_THERM_THROT_H__ */