sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.
This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 4b17f84..94deebd 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -62,7 +62,7 @@
unsigned int type;
/* Port IRQs: ERI, RXI, TXI, BRI (optional) */
- unsigned int irqs[SCIx_NR_IRQS];
+ unsigned int irqs[SCIx_NR_IRQS];
/* Port pin configuration */
void (*init_pins)(struct uart_port *port,
@@ -351,7 +351,7 @@
} else {
#ifdef CONFIG_CPU_SUBTYPE_SH7343
/* Nothing */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */
#else
ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
@@ -361,7 +361,9 @@
}
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
static inline int scif_txroom(struct uart_port *port)
{
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f);
@@ -1368,9 +1370,19 @@
struct plat_sci_port *p = dev->dev.platform_data;
int i;
- for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) {
+ for (i = 0; p && p->flags != 0; p++, i++) {
struct sci_port *sciport = &sci_ports[i];
+ /* Sanity check */
+ if (unlikely(i == SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port "
+ "%d when only %d are available.\n",
+ i+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping "
+ "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ break;
+ }
+
sciport->port.mapbase = p->mapbase;
/*