include/linux/pxa2xx_ssp.h - kernel/msm-4.9 - Gitiles

 /*
  *  pxa2xx_ssp.h
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * This driver supports the following PXA CPU/SSP ports:-
  *
  *       PXA250     SSP
  *       PXA255     SSP, NSSP
  *       PXA26x     SSP, NSSP, ASSP
  *       PXA27x     SSP1, SSP2, SSP3
  *       PXA3xx     SSP1, SSP2, SSP3, SSP4
  */

 #ifndef __LINUX_SSP_H
 #define __LINUX_SSP_H

 #include <linux/list.h>
 #include <linux/io.h>

 /*
  * SSP Serial Port Registers
  * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
  * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
  */

 #define SSCR0		(0x00)  /* SSP Control Register 0 */
 #define SSCR1		(0x04)  /* SSP Control Register 1 */
 #define SSSR		(0x08)  /* SSP Status Register */
 #define SSITR		(0x0C)  /* SSP Interrupt Test Register */
 #define SSDR		(0x10)  /* SSP Data Write/Data Read Register */

 #define SSTO		(0x28)  /* SSP Time Out Register */
 #define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
 #define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
 #define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
 #define SSTSS		(0x38)  /* SSP Timeslot Status */
 #define SSACD		(0x3C)  /* SSP Audio Clock Divider */
 #define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */

 /* Common PXA2xx bits first */
 #define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
 #define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
 #define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
 #define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
 #define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
 #define SSCR0_National	(0x2 << 4)	/* National Microwire */
 #define SSCR0_ECS	(1 << 6)	/* External clock select */
 #define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
 #define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */

 /* PXA27x, PXA3xx */
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
 #define SSCR0_NCS	(1 << 21)	/* Network clock select */
 #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
 #define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
 #define SSCR0_ACS	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */


 #define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
 #define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
 #define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
 #define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
 #define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
 #define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */

 #define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */
 #define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
 #define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
 #define SSSR_BSY	(1 << 4)	/* SSP Busy */
 #define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
 #define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
 #define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */

 #ifdef CONFIG_ARCH_PXA
 #define RX_THRESH_DFLT	8
 #define TX_THRESH_DFLT	8

 #define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
 #define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */

 #define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
 #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
 #define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
 #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */

 #else

 #define RX_THRESH_DFLT	2
 #define TX_THRESH_DFLT	2

 #define SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
 #define SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */

 #define SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
 #define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
 #define SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
 #define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
 #endif

 /* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 #define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
 #define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
 #define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
 #define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
 #define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
 #define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
 #define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
 #define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
 #define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
 #define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
 #define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
 #define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
 #define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
 #define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
 #define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
 #define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interrupt Enable */
 #define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
 #define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
 #define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */

 #define SSSR_BCE		(1 << 23)	/* Bit Count Error */
 #define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
 #define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
 #define SSSR_EOC		(1 << 20)	/* End Of Chain */
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */


 #define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
 #define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
 #define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
 #define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
 #define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
 #define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */

 /* PXA3xx */
 #define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
 #define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
 #define SSPSP_TIMING_MASK	(0x7f8001f0)

 #define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
 #define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
 #define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
 #define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */

 enum pxa_ssp_type {
 	SSP_UNDEFINED = 0,
 	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
 	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
 	PXA27x_SSP,
 	PXA3xx_SSP,
 	PXA168_SSP,
 	PXA910_SSP,
 	CE4100_SSP,
 };

 struct ssp_device {
 	struct platform_device *pdev;
 	struct list_head	node;

 	struct clk	*clk;
 	void __iomem	*mmio_base;
 	unsigned long	phys_base;

 	const char	*label;
 	int		port_id;
 	int		type;
 	int		use_count;
 	int		irq;
 	int		drcmr_rx;
 	int		drcmr_tx;
 };

 /**
  * pxa_ssp_write_reg - Write to a SSP register
  *
  * @dev: SSP device to access
  * @reg: Register to write to
  * @val: Value to be written.
  */
 static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
 {
 	__raw_writel(val, dev->mmio_base + reg);
 }

 /**
  * pxa_ssp_read_reg - Read from a SSP register
  *
  * @dev: SSP device to access
  * @reg: Register to read from
  */
 static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 {
 	return __raw_readl(dev->mmio_base + reg);
 }

 struct ssp_device *pxa_ssp_request(int port, const char *label);
 void pxa_ssp_free(struct ssp_device *);
 #endif
	/*
	* pxa2xx_ssp.h
	*
	* Copyright (C) 2003 Russell King, All Rights Reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This driver supports the following PXA CPU/SSP ports:-
	*
	* PXA250 SSP
	* PXA255 SSP, NSSP
	* PXA26x SSP, NSSP, ASSP
	* PXA27x SSP1, SSP2, SSP3
	* PXA3xx SSP1, SSP2, SSP3, SSP4
	*/

	#ifndef __LINUX_SSP_H
	#define __LINUX_SSP_H

	#include <linux/list.h>
	#include <linux/io.h>

	/*
	* SSP Serial Port Registers
	* PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
	* PXA255, PXA26x and PXA27x have extra ports, registers and bits.
	*/

	#define SSCR0 (0x00) /* SSP Control Register 0 */
	#define SSCR1 (0x04) /* SSP Control Register 1 */
	#define SSSR (0x08) /* SSP Status Register */
	#define SSITR (0x0C) /* SSP Interrupt Test Register */
	#define SSDR (0x10) /* SSP Data Write/Data Read Register */

	#define SSTO (0x28) /* SSP Time Out Register */
	#define SSPSP (0x2C) /* SSP Programmable Serial Protocol */
	#define SSTSA (0x30) /* SSP Tx Timeslot Active */
	#define SSRSA (0x34) /* SSP Rx Timeslot Active */
	#define SSTSS (0x38) /* SSP Timeslot Status */
	#define SSACD (0x3C) /* SSP Audio Clock Divider */
	#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */

	/* Common PXA2xx bits first */
	#define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */
	#define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */
	#define SSCR0_FRF (0x00000030) /* FRame Format (mask) */
	#define SSCR0_Motorola (0x0 << 4) /* Motorola's Serial Peripheral Interface (SPI) */
	#define SSCR0_TI (0x1 << 4) /* Texas Instruments' Synchronous Serial Protocol (SSP) */
	#define SSCR0_National (0x2 << 4) /* National Microwire */
	#define SSCR0_ECS (1 << 6) /* External clock select */
	#define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */
	#define SSCR0_SCR(x) ((x) << 8) /* Serial Clock Rate (mask) */

	/* PXA27x, PXA3xx */
	#define SSCR0_EDSS (1 << 20) /* Extended data size select */
	#define SSCR0_NCS (1 << 21) /* Network clock select */
	#define SSCR0_RIM (1 << 22) /* Receive FIFO overrrun interrupt mask */
	#define SSCR0_TUM (1 << 23) /* Transmit FIFO underrun interrupt mask */
	#define SSCR0_FRDC (0x07000000) /* Frame rate divider control (mask) */
	#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24) /* Time slots per frame [1..8] */
	#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */
	#define SSCR0_ACS (1 << 30) /* Audio clock select */
	#define SSCR0_MOD (1 << 31) /* Mode (normal or network) */


	#define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */
	#define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */
	#define SSCR1_LBM (1 << 2) /* Loop-Back Mode */
	#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
	#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
	#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */

	#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
	#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
	#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
	#define SSSR_BSY (1 << 4) /* SSP Busy */
	#define SSSR_TFS (1 << 5) /* Transmit FIFO Service Request */
	#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
	#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */

	#ifdef CONFIG_ARCH_PXA
	#define RX_THRESH_DFLT 8
	#define TX_THRESH_DFLT 8

	#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
	#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */

	#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
	#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
	#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
	#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */

	#else

	#define RX_THRESH_DFLT 2
	#define TX_THRESH_DFLT 2

	#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
	#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */

	#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
	#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
	#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
	#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
	#endif

	/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
	#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
	#define SSCR0_PSP (3 << 4) /* PSP - Programmable Serial Protocol */
	#define SSCR1_TTELP (1 << 31) /* TXD Tristate Enable Last Phase */
	#define SSCR1_TTE (1 << 30) /* TXD Tristate Enable */
	#define SSCR1_EBCEI (1 << 29) /* Enable Bit Count Error interrupt */
	#define SSCR1_SCFR (1 << 28) /* Slave Clock free Running */
	#define SSCR1_ECRA (1 << 27) /* Enable Clock Request A */
	#define SSCR1_ECRB (1 << 26) /* Enable Clock request B */
	#define SSCR1_SCLKDIR (1 << 25) /* Serial Bit Rate Clock Direction */
	#define SSCR1_SFRMDIR (1 << 24) /* Frame Direction */
	#define SSCR1_RWOT (1 << 23) /* Receive Without Transmit */
	#define SSCR1_TRAIL (1 << 22) /* Trailing Byte */
	#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
	#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
	#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
	#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
	#define SSCR1_IFS (1 << 16) /* Invert Frame Signal */
	#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
	#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */

	#define SSSR_BCE (1 << 23) /* Bit Count Error */
	#define SSSR_CSS (1 << 22) /* Clock Synchronisation Status */
	#define SSSR_TUR (1 << 21) /* Transmit FIFO Under Run */
	#define SSSR_EOC (1 << 20) /* End Of Chain */
	#define SSSR_TINT (1 << 19) /* Receiver Time-out Interrupt */
	#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */


	#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
	#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
	#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
	#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
	#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
	#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
	#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
	#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
	#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */

	/* PXA3xx */
	#define SSPSP_EDMYSTRT(x) ((x) << 26) /* Extended Dummy Start */
	#define SSPSP_EDMYSTOP(x) ((x) << 28) /* Extended Dummy Stop */
	#define SSPSP_TIMING_MASK (0x7f8001f0)

	#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
	#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
	#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
	#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */

	enum pxa_ssp_type {
	SSP_UNDEFINED = 0,
	PXA25x_SSP, /* pxa 210, 250, 255, 26x */
	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
	PXA27x_SSP,
	PXA3xx_SSP,
	PXA168_SSP,
	PXA910_SSP,
	CE4100_SSP,
	};

	struct ssp_device {
	struct platform_device *pdev;
	struct list_head node;

	struct clk *clk;
	void __iomem *mmio_base;
	unsigned long phys_base;

	const char *label;
	int port_id;
	int type;
	int use_count;
	int irq;
	int drcmr_rx;
	int drcmr_tx;
	};

	/**
	* pxa_ssp_write_reg - Write to a SSP register
	*
	* @dev: SSP device to access
	* @reg: Register to write to
	* @val: Value to be written.
	*/
	static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
	{
	__raw_writel(val, dev->mmio_base + reg);
	}

	/**
	* pxa_ssp_read_reg - Read from a SSP register
	*
	* @dev: SSP device to access
	* @reg: Register to read from
	*/
	static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
	{
	return __raw_readl(dev->mmio_base + reg);
	}

	struct ssp_device pxa_ssp_request(int port, const char label);
	void pxa_ssp_free(struct ssp_device *);
	#endif