drivers/usb/dwc3/ep0.c - kernel/msm-4.9 - Gitiles

 /**
  * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions, and the following disclaimer,
  *    without modification.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  * 3. The names of the above-listed copyright holders may not be used
  *    to endorse or promote products derived from this software without
  *    specific prior written permission.
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") version 2, as published by the Free
  * Software Foundation.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/list.h>
 #include <linux/dma-mapping.h>

 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>

 #include "core.h"
 #include "gadget.h"
 #include "io.h"

 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event);

 static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
 {
 	switch (state) {
 	case EP0_UNCONNECTED:
 		return "Unconnected";
 	case EP0_SETUP_PHASE:
 		return "Setup Phase";
 	case EP0_DATA_PHASE:
 		return "Data Phase";
 	case EP0_STATUS_PHASE:
 		return "Status Phase";
 	default:
 		return "UNKNOWN";
 	}
 }

 static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 		u32 len, u32 type)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_trb_hw		*trb_hw;
 	struct dwc3_trb			trb;
 	struct dwc3_ep			*dep;

 	int				ret;

 	dep = dwc->eps[epnum];
 	if (dep->flags & DWC3_EP_BUSY) {
 		dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
 		return 0;
 	}

 	trb_hw = dwc->ep0_trb;
 	memset(&trb, 0, sizeof(trb));

 	trb.trbctl = type;
 	trb.bplh = buf_dma;
 	trb.length = len;

 	trb.hwo	= 1;
 	trb.lst	= 1;
 	trb.ioc	= 1;
 	trb.isp_imi = 1;

 	dwc3_trb_to_hw(&trb, trb_hw);

 	memset(&params, 0, sizeof(params));
 	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
 	params.param1 = lower_32_bits(dwc->ep0_trb_addr);

 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0) {
 		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
 		return ret;
 	}

 	dep->flags |= DWC3_EP_BUSY;
 	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
 			dep->number);

 	dwc->ep0_next_event = DWC3_EP0_COMPLETE;

 	return 0;
 }

 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 		struct dwc3_request *req)
 {
 	int			ret = 0;

 	req->request.actual	= 0;
 	req->request.status	= -EINPROGRESS;
 	req->epnum		= dep->number;

 	list_add_tail(&req->list, &dep->request_list);

 	/*
 	 * Gadget driver might not be quick enough to queue a request
 	 * before we get a Transfer Not Ready event on this endpoint.
 	 *
 	 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
 	 * flag is set, it's telling us that as soon as Gadget queues the
 	 * required request, we should kick the transfer here because the
 	 * IRQ we were waiting for is long gone.
 	 */
 	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
 		struct dwc3	*dwc = dep->dwc;
 		unsigned	direction;
 		u32		type;

 		direction = !!(dep->flags & DWC3_EP0_DIR_IN);

 		if (dwc->ep0state == EP0_STATUS_PHASE) {
 			type = dwc->three_stage_setup
 				? DWC3_TRBCTL_CONTROL_STATUS3
 				: DWC3_TRBCTL_CONTROL_STATUS2;
 		} else if (dwc->ep0state == EP0_DATA_PHASE) {
 			type = DWC3_TRBCTL_CONTROL_DATA;
 		} else {
 			/* should never happen */
 			WARN_ON(1);
 			return 0;
 		}

 		ret = dwc3_ep0_start_trans(dwc, direction,
 				req->request.dma, req->request.length, type);
 		dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
 				DWC3_EP0_DIR_IN);
 	}

 	return ret;
 }

 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		gfp_t gfp_flags)
 {
 	struct dwc3_request		*req = to_dwc3_request(request);
 	struct dwc3_ep			*dep = to_dwc3_ep(ep);
 	struct dwc3			*dwc = dep->dwc;

 	unsigned long			flags;

 	int				ret;

 	spin_lock_irqsave(&dwc->lock, flags);
 	if (!dep->desc) {
 		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
 				request, dep->name);
 		ret = -ESHUTDOWN;
 		goto out;
 	}

 	/* we share one TRB for ep0/1 */
 	if (!list_empty(&dwc->eps[0]->request_list) ||
 			!list_empty(&dwc->eps[1]->request_list) ||
 			dwc->ep0_status_pending) {
 		ret = -EBUSY;
 		goto out;
 	}

 	dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
 			request, dep->name, request->length,
 			dwc3_ep0_state_string(dwc->ep0state));

 	ret = __dwc3_gadget_ep0_queue(dep, req);

 out:
 	spin_unlock_irqrestore(&dwc->lock, flags);

 	return ret;
 }

 static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
 {
 	struct dwc3_ep		*dep = dwc->eps[0];

 	/* stall is always issued on EP0 */
 	__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
 	dwc->eps[0]->flags = DWC3_EP_ENABLED;

 	if (!list_empty(&dep->request_list)) {
 		struct dwc3_request	*req;

 		req = next_request(&dep->request_list);
 		dwc3_gadget_giveback(dep, req, -ECONNRESET);
 	}

 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
 }

 void dwc3_ep0_out_start(struct dwc3 *dwc)
 {
 	int				ret;

 	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
 			DWC3_TRBCTL_CONTROL_SETUP);
 	WARN_ON(ret < 0);
 }

 static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
 {
 	struct dwc3_ep		*dep;
 	u32			windex = le16_to_cpu(wIndex_le);
 	u32			epnum;

 	epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
 	if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
 		epnum |= 1;

 	dep = dwc->eps[epnum];
 	if (dep->flags & DWC3_EP_ENABLED)
 		return dep;

 	return NULL;
 }

 static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
 {
 	dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
 			dwc->ep0_usb_req.length,
 			DWC3_TRBCTL_CONTROL_DATA);
 }

 /*
  * ch 9.4.5
  */
 static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	struct dwc3_ep		*dep;
 	u32			recip;
 	u16			usb_status = 0;
 	__le16			*response_pkt;

 	recip = ctrl->bRequestType & USB_RECIP_MASK;
 	switch (recip) {
 	case USB_RECIP_DEVICE:
 		/*
 		 * We are self-powered. U1/U2/LTM will be set later
 		 * once we handle this states. RemoteWakeup is 0 on SS
 		 */
 		usb_status |= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
 		break;

 	case USB_RECIP_INTERFACE:
 		/*
 		 * Function Remote Wake Capable	D0
 		 * Function Remote Wakeup	D1
 		 */
 		break;

 	case USB_RECIP_ENDPOINT:
 		dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 		if (!dep)
 		       return -EINVAL;

 		if (dep->flags & DWC3_EP_STALL)
 			usb_status = 1 << USB_ENDPOINT_HALT;
 		break;
 	default:
 		return -EINVAL;
 	};

 	response_pkt = (__le16 *) dwc->setup_buf;
 	*response_pkt = cpu_to_le16(usb_status);
 	dwc->ep0_usb_req.length = sizeof(*response_pkt);
 	dwc->ep0_status_pending = 1;

 	return 0;
 }

 static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 		struct usb_ctrlrequest *ctrl, int set)
 {
 	struct dwc3_ep		*dep;
 	u32			recip;
 	u32			wValue;
 	u32			wIndex;
 	u32			reg;
 	int			ret;
 	u32			mode;

 	wValue = le16_to_cpu(ctrl->wValue);
 	wIndex = le16_to_cpu(ctrl->wIndex);
 	recip = ctrl->bRequestType & USB_RECIP_MASK;
 	switch (recip) {
 	case USB_RECIP_DEVICE:

 		/*
 		 * 9.4.1 says only only for SS, in AddressState only for
 		 * default control pipe
 		 */
 		switch (wValue) {
 		case USB_DEVICE_U1_ENABLE:
 		case USB_DEVICE_U2_ENABLE:
 		case USB_DEVICE_LTM_ENABLE:
 			if (dwc->dev_state != DWC3_CONFIGURED_STATE)
 				return -EINVAL;
 			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
 				return -EINVAL;
 		}

 		/* XXX add U[12] & LTM */
 		switch (wValue) {
 		case USB_DEVICE_REMOTE_WAKEUP:
 			break;
 		case USB_DEVICE_U1_ENABLE:
 			break;
 		case USB_DEVICE_U2_ENABLE:
 			break;
 		case USB_DEVICE_LTM_ENABLE:
 			break;

 		case USB_DEVICE_TEST_MODE:
 			if ((wIndex & 0xff) != 0)
 				return -EINVAL;
 			if (!set)
 				return -EINVAL;

 			mode = wIndex >> 8;
 			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 			reg &= ~DWC3_DCTL_TSTCTRL_MASK;

 			switch (mode) {
 			case TEST_J:
 			case TEST_K:
 			case TEST_SE0_NAK:
 			case TEST_PACKET:
 			case TEST_FORCE_EN:
 				reg |= mode << 1;
 				break;
 			default:
 				return -EINVAL;
 			}
 			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 			break;
 		default:
 			return -EINVAL;
 		}
 		break;

 	case USB_RECIP_INTERFACE:
 		switch (wValue) {
 		case USB_INTRF_FUNC_SUSPEND:
 			if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
 				/* XXX enable Low power suspend */
 				;
 			if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
 				/* XXX enable remote wakeup */
 				;
 			break;
 		default:
 			return -EINVAL;
 		}
 		break;

 	case USB_RECIP_ENDPOINT:
 		switch (wValue) {
 		case USB_ENDPOINT_HALT:

 			dep =  dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 			if (!dep)
 				return -EINVAL;
 			ret = __dwc3_gadget_ep_set_halt(dep, set);
 			if (ret)
 				return -EINVAL;
 			break;
 		default:
 			return -EINVAL;
 		}
 		break;

 	default:
 		return -EINVAL;
 	};

 	return 0;
 }

 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	u32 addr;
 	u32 reg;

 	addr = le16_to_cpu(ctrl->wValue);
 	if (addr > 127)
 		return -EINVAL;

 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
 	reg |= DWC3_DCFG_DEVADDR(addr);
 	dwc3_writel(dwc->regs, DWC3_DCFG, reg);

 	if (addr)
 		dwc->dev_state = DWC3_ADDRESS_STATE;
 	else
 		dwc->dev_state = DWC3_DEFAULT_STATE;

 	return 0;
 }

 static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	int ret;

 	spin_unlock(&dwc->lock);
 	ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
 	spin_lock(&dwc->lock);
 	return ret;
 }

 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	u32 cfg;
 	int ret;

 	dwc->start_config_issued = false;
 	cfg = le16_to_cpu(ctrl->wValue);

 	switch (dwc->dev_state) {
 	case DWC3_DEFAULT_STATE:
 		return -EINVAL;
 		break;

 	case DWC3_ADDRESS_STATE:
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		/* if the cfg matches and the cfg is non zero */
 		if (!ret && cfg)
 			dwc->dev_state = DWC3_CONFIGURED_STATE;
 		break;

 	case DWC3_CONFIGURED_STATE:
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		if (!cfg)
 			dwc->dev_state = DWC3_ADDRESS_STATE;
 		break;
 	}
 	return 0;
 }

 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 {
 	int ret;

 	switch (ctrl->bRequest) {
 	case USB_REQ_GET_STATUS:
 		dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
 		ret = dwc3_ep0_handle_status(dwc, ctrl);
 		break;
 	case USB_REQ_CLEAR_FEATURE:
 		dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
 		ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
 		break;
 	case USB_REQ_SET_FEATURE:
 		dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
 		ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
 		break;
 	case USB_REQ_SET_ADDRESS:
 		dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
 		ret = dwc3_ep0_set_address(dwc, ctrl);
 		break;
 	case USB_REQ_SET_CONFIGURATION:
 		dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
 		ret = dwc3_ep0_set_config(dwc, ctrl);
 		break;
 	default:
 		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
 	};

 	return ret;
 }

 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
 	int ret;
 	u32 len;

 	if (!dwc->gadget_driver)
 		goto err;

 	len = le16_to_cpu(ctrl->wLength);
 	if (!len) {
 		dwc->three_stage_setup = false;
 		dwc->ep0_expect_in = false;
 		dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
 	} else {
 		dwc->three_stage_setup = true;
 		dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
 		dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
 	}

 	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
 		ret = dwc3_ep0_std_request(dwc, ctrl);
 	else
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);

 	if (ret >= 0)
 		return;

 err:
 	dwc3_ep0_stall_and_restart(dwc);
 }

 static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	struct dwc3_request	*r = NULL;
 	struct usb_request	*ur;
 	struct dwc3_trb		trb;
 	struct dwc3_ep		*dep;
 	u32			transferred;
 	u8			epnum;

 	epnum = event->endpoint_number;
 	dep = dwc->eps[epnum];

 	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;

 	if (!dwc->ep0_status_pending) {
 		r = next_request(&dwc->eps[0]->request_list);
 		ur = &r->request;
 	} else {
 		ur = &dwc->ep0_usb_req;
 		dwc->ep0_status_pending = 0;
 	}

 	dwc3_trb_to_nat(dwc->ep0_trb, &trb);

 	if (dwc->ep0_bounced) {
 		struct dwc3_ep	*ep0 = dwc->eps[0];

 		transferred = min_t(u32, ur->length,
 				ep0->endpoint.maxpacket - trb.length);
 		memcpy(ur->buf, dwc->ep0_bounce, transferred);
 		dwc->ep0_bounced = false;
 	} else {
 		transferred = ur->length - trb.length;
 		ur->actual += transferred;
 	}

 	if ((epnum & 1) && ur->actual < ur->length) {
 		/* for some reason we did not get everything out */

 		dwc3_ep0_stall_and_restart(dwc);
 	} else {
 		/*
 		 * handle the case where we have to send a zero packet. This
 		 * seems to be case when req.length > maxpacket. Could it be?
 		 */
 		if (r)
 			dwc3_gadget_giveback(dep, r, 0);
 	}
 }

 static void dwc3_ep0_complete_req(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	struct dwc3_request	*r;
 	struct dwc3_ep		*dep;

 	dep = dwc->eps[0];

 	if (!list_empty(&dep->request_list)) {
 		r = next_request(&dep->request_list);

 		dwc3_gadget_giveback(dep, r, 0);
 	}

 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
 }

 static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
 			const struct dwc3_event_depevt *event)
 {
 	struct dwc3_ep		*dep = dwc->eps[event->endpoint_number];

 	dep->flags &= ~DWC3_EP_BUSY;

 	switch (dwc->ep0state) {
 	case EP0_SETUP_PHASE:
 		dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
 		dwc3_ep0_inspect_setup(dwc, event);
 		break;

 	case EP0_DATA_PHASE:
 		dev_vdbg(dwc->dev, "Data Phase\n");
 		dwc3_ep0_complete_data(dwc, event);
 		break;

 	case EP0_STATUS_PHASE:
 		dev_vdbg(dwc->dev, "Status Phase\n");
 		dwc3_ep0_complete_req(dwc, event);
 		break;
 	default:
 		WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
 	}
 }

 static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
 }

 static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	struct dwc3_ep		*dep;
 	struct dwc3_request	*req;
 	int			ret;

 	dep = dwc->eps[0];
 	dwc->ep0state = EP0_DATA_PHASE;

 	if (dwc->ep0_status_pending) {
 		dwc3_ep0_send_status_response(dwc);
 		return;
 	}

 	if (list_empty(&dep->request_list)) {
 		dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
 		dep->flags |= DWC3_EP_PENDING_REQUEST;

 		if (event->endpoint_number)
 			dep->flags |= DWC3_EP0_DIR_IN;
 		return;
 	}

 	req = next_request(&dep->request_list);
 	req->direction = !!event->endpoint_number;

 	dwc->ep0state = EP0_DATA_PHASE;
 	if (req->request.length == 0) {
 		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
 				dwc->ctrl_req_addr, 0,
 				DWC3_TRBCTL_CONTROL_DATA);
 	} else if ((req->request.length % dep->endpoint.maxpacket)
 			&& (event->endpoint_number == 0)) {
 		dwc3_map_buffer_to_dma(req);

 		WARN_ON(req->request.length > dep->endpoint.maxpacket);

 		dwc->ep0_bounced = true;

 		/*
 		 * REVISIT in case request length is bigger than EP0
 		 * wMaxPacketSize, we will need two chained TRBs to handle
 		 * the transfer.
 		 */
 		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
 				dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
 				DWC3_TRBCTL_CONTROL_DATA);
 	} else {
 		dwc3_map_buffer_to_dma(req);

 		ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
 				req->request.dma, req->request.length,
 				DWC3_TRBCTL_CONTROL_DATA);
 	}

 	WARN_ON(ret < 0);
 }

 static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	u32			type;
 	int			ret;

 	dwc->ep0state = EP0_STATUS_PHASE;

 	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
 		: DWC3_TRBCTL_CONTROL_STATUS2;

 	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
 			dwc->ctrl_req_addr, 0, type);

 	WARN_ON(ret < 0);
 }

 static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
 	switch (event->status) {
 	case DEPEVT_STATUS_CONTROL_SETUP:
 		dev_vdbg(dwc->dev, "Control Setup\n");
 		dwc3_ep0_do_control_setup(dwc, event);
 		break;

 	case DEPEVT_STATUS_CONTROL_DATA:
 		dev_vdbg(dwc->dev, "Control Data\n");

 		if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
 			dev_vdbg(dwc->dev, "Expected %d got %d\n",
 					dwc->ep0_next_event,
 					DWC3_EP0_NRDY_DATA);

 			dwc3_ep0_stall_and_restart(dwc);
 			return;
 		}

 		/*
 		 * One of the possible error cases is when Host _does_
 		 * request for Data Phase, but it does so on the wrong
 		 * direction.
 		 *
 		 * Here, we already know ep0_next_event is DATA (see above),
 		 * so we only need to check for direction.
 		 */
 		if (dwc->ep0_expect_in != event->endpoint_number) {
 			dev_vdbg(dwc->dev, "Wrong direction for Data phase\n");
 			dwc3_ep0_stall_and_restart(dwc);
 			return;
 		}

 		dwc3_ep0_do_control_data(dwc, event);
 		break;

 	case DEPEVT_STATUS_CONTROL_STATUS:
 		dev_vdbg(dwc->dev, "Control Status\n");

 		if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
 			dev_vdbg(dwc->dev, "Expected %d got %d\n",
 					dwc->ep0_next_event,
 					DWC3_EP0_NRDY_STATUS);

 			dwc3_ep0_stall_and_restart(dwc);
 			return;
 		}
 		dwc3_ep0_do_control_status(dwc, event);
 	}
 }

 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const const struct dwc3_event_depevt *event)
 {
 	u8			epnum = event->endpoint_number;

 	dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
 			dwc3_ep_event_string(event->endpoint_event),
 			epnum >> 1, (epnum & 1) ? "in" : "out",
 			dwc3_ep0_state_string(dwc->ep0state));

 	switch (event->endpoint_event) {
 	case DWC3_DEPEVT_XFERCOMPLETE:
 		dwc3_ep0_xfer_complete(dwc, event);
 		break;

 	case DWC3_DEPEVT_XFERNOTREADY:
 		dwc3_ep0_xfernotready(dwc, event);
 		break;

 	case DWC3_DEPEVT_XFERINPROGRESS:
 	case DWC3_DEPEVT_RXTXFIFOEVT:
 	case DWC3_DEPEVT_STREAMEVT:
 	case DWC3_DEPEVT_EPCMDCMPLT:
 		break;
 	}
 }
	/**
	* ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
	*
	* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
	*
	* Authors: Felipe Balbi <balbi@ti.com>,
	* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions, and the following disclaimer,
	* without modification.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. The names of the above-listed copyright holders may not be used
	* to endorse or promote products derived from this software without
	* specific prior written permission.
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") version 2, as published by the Free
	* Software Foundation.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
	* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
	* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
	* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
	* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
	* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
	* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/spinlock.h>
	#include <linux/platform_device.h>
	#include <linux/pm_runtime.h>
	#include <linux/interrupt.h>
	#include <linux/io.h>
	#include <linux/list.h>
	#include <linux/dma-mapping.h>

	#include <linux/usb/ch9.h>
	#include <linux/usb/gadget.h>

	#include "core.h"
	#include "gadget.h"
	#include "io.h"

	static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event);

	static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
	{
	switch (state) {
	case EP0_UNCONNECTED:
	return "Unconnected";
	case EP0_SETUP_PHASE:
	return "Setup Phase";
	case EP0_DATA_PHASE:
	return "Data Phase";
	case EP0_STATUS_PHASE:
	return "Status Phase";
	default:
	return "UNKNOWN";
	}
	}

	static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
	u32 len, u32 type)
	{
	struct dwc3_gadget_ep_cmd_params params;
	struct dwc3_trb_hw *trb_hw;
	struct dwc3_trb trb;
	struct dwc3_ep *dep;

	int ret;

	dep = dwc->eps[epnum];
	if (dep->flags & DWC3_EP_BUSY) {
	dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
	return 0;
	}

	trb_hw = dwc->ep0_trb;
	memset(&trb, 0, sizeof(trb));

	trb.trbctl = type;
	trb.bplh = buf_dma;
	trb.length = len;

	trb.hwo = 1;
	trb.lst = 1;
	trb.ioc = 1;
	trb.isp_imi = 1;

	dwc3_trb_to_hw(&trb, trb_hw);

	memset(&params, 0, sizeof(params));
	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
	params.param1 = lower_32_bits(dwc->ep0_trb_addr);

	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
	DWC3_DEPCMD_STARTTRANSFER, &params);
	if (ret < 0) {
	dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
	return ret;
	}

	dep->flags \|= DWC3_EP_BUSY;
	dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
	dep->number);

	dwc->ep0_next_event = DWC3_EP0_COMPLETE;

	return 0;
	}

	static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
	struct dwc3_request *req)
	{
	int ret = 0;

	req->request.actual = 0;
	req->request.status = -EINPROGRESS;
	req->epnum = dep->number;

	list_add_tail(&req->list, &dep->request_list);

	/*
	* Gadget driver might not be quick enough to queue a request
	* before we get a Transfer Not Ready event on this endpoint.
	*
	* In that case, we will set DWC3_EP_PENDING_REQUEST. When that
	* flag is set, it's telling us that as soon as Gadget queues the
	* required request, we should kick the transfer here because the
	* IRQ we were waiting for is long gone.
	*/
	if (dep->flags & DWC3_EP_PENDING_REQUEST) {
	struct dwc3 *dwc = dep->dwc;
	unsigned direction;
	u32 type;

	direction = !!(dep->flags & DWC3_EP0_DIR_IN);

	if (dwc->ep0state == EP0_STATUS_PHASE) {
	type = dwc->three_stage_setup
	? DWC3_TRBCTL_CONTROL_STATUS3
	: DWC3_TRBCTL_CONTROL_STATUS2;
	} else if (dwc->ep0state == EP0_DATA_PHASE) {
	type = DWC3_TRBCTL_CONTROL_DATA;
	} else {
	/* should never happen */
	WARN_ON(1);
	return 0;
	}

	ret = dwc3_ep0_start_trans(dwc, direction,
	req->request.dma, req->request.length, type);
	dep->flags &= ~(DWC3_EP_PENDING_REQUEST \|
	DWC3_EP0_DIR_IN);
	}

	return ret;
	}

	int dwc3_gadget_ep0_queue(struct usb_ep ep, struct usb_request request,
	gfp_t gfp_flags)
	{
	struct dwc3_request *req = to_dwc3_request(request);
	struct dwc3_ep *dep = to_dwc3_ep(ep);
	struct dwc3 *dwc = dep->dwc;

	unsigned long flags;

	int ret;

	spin_lock_irqsave(&dwc->lock, flags);
	if (!dep->desc) {
	dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
	request, dep->name);
	ret = -ESHUTDOWN;
	goto out;
	}

	/* we share one TRB for ep0/1 */
	if (!list_empty(&dwc->eps[0]->request_list) \|\|
	!list_empty(&dwc->eps[1]->request_list) \|\|
	dwc->ep0_status_pending) {
	ret = -EBUSY;
	goto out;
	}

	dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
	request, dep->name, request->length,
	dwc3_ep0_state_string(dwc->ep0state));

	ret = __dwc3_gadget_ep0_queue(dep, req);

	out:
	spin_unlock_irqrestore(&dwc->lock, flags);

	return ret;
	}

	static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
	{
	struct dwc3_ep *dep = dwc->eps[0];

	/* stall is always issued on EP0 */
	__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
	dwc->eps[0]->flags = DWC3_EP_ENABLED;

	if (!list_empty(&dep->request_list)) {
	struct dwc3_request *req;

	req = next_request(&dep->request_list);
	dwc3_gadget_giveback(dep, req, -ECONNRESET);
	}

	dwc->ep0state = EP0_SETUP_PHASE;
	dwc3_ep0_out_start(dwc);
	}

	void dwc3_ep0_out_start(struct dwc3 *dwc)
	{
	int ret;

	ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
	DWC3_TRBCTL_CONTROL_SETUP);
	WARN_ON(ret < 0);
	}

	static struct dwc3_ep dwc3_wIndex_to_dep(struct dwc3 dwc, __le16 wIndex_le)
	{
	struct dwc3_ep *dep;
	u32 windex = le16_to_cpu(wIndex_le);
	u32 epnum;

	epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
	if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
	epnum \|= 1;

	dep = dwc->eps[epnum];
	if (dep->flags & DWC3_EP_ENABLED)
	return dep;

	return NULL;
	}

	static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
	{
	dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
	dwc->ep0_usb_req.length,
	DWC3_TRBCTL_CONTROL_DATA);
	}

	/*
	* ch 9.4.5
	*/
	static int dwc3_ep0_handle_status(struct dwc3 dwc, struct usb_ctrlrequest ctrl)
	{
	struct dwc3_ep *dep;
	u32 recip;
	u16 usb_status = 0;
	__le16 *response_pkt;

	recip = ctrl->bRequestType & USB_RECIP_MASK;
	switch (recip) {
	case USB_RECIP_DEVICE:
	/*
	* We are self-powered. U1/U2/LTM will be set later
	* once we handle this states. RemoteWakeup is 0 on SS
	*/
	usb_status \|= dwc->is_selfpowered << USB_DEVICE_SELF_POWERED;
	break;

	case USB_RECIP_INTERFACE:
	/*
	* Function Remote Wake Capable D0
	* Function Remote Wakeup D1
	*/
	break;

	case USB_RECIP_ENDPOINT:
	dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
	if (!dep)
	return -EINVAL;

	if (dep->flags & DWC3_EP_STALL)
	usb_status = 1 << USB_ENDPOINT_HALT;
	break;
	default:
	return -EINVAL;
	};

	response_pkt = (__le16 *) dwc->setup_buf;
	*response_pkt = cpu_to_le16(usb_status);
	dwc->ep0_usb_req.length = sizeof(*response_pkt);
	dwc->ep0_status_pending = 1;

	return 0;
	}

	static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
	struct usb_ctrlrequest *ctrl, int set)
	{
	struct dwc3_ep *dep;
	u32 recip;
	u32 wValue;
	u32 wIndex;
	u32 reg;
	int ret;
	u32 mode;

	wValue = le16_to_cpu(ctrl->wValue);
	wIndex = le16_to_cpu(ctrl->wIndex);
	recip = ctrl->bRequestType & USB_RECIP_MASK;
	switch (recip) {
	case USB_RECIP_DEVICE:

	/*
	* 9.4.1 says only only for SS, in AddressState only for
	* default control pipe
	*/
	switch (wValue) {
	case USB_DEVICE_U1_ENABLE:
	case USB_DEVICE_U2_ENABLE:
	case USB_DEVICE_LTM_ENABLE:
	if (dwc->dev_state != DWC3_CONFIGURED_STATE)
	return -EINVAL;
	if (dwc->speed != DWC3_DSTS_SUPERSPEED)
	return -EINVAL;
	}

	/* XXX add U[12] & LTM */
	switch (wValue) {
	case USB_DEVICE_REMOTE_WAKEUP:
	break;
	case USB_DEVICE_U1_ENABLE:
	break;
	case USB_DEVICE_U2_ENABLE:
	break;
	case USB_DEVICE_LTM_ENABLE:
	break;

	case USB_DEVICE_TEST_MODE:
	if ((wIndex & 0xff) != 0)
	return -EINVAL;
	if (!set)
	return -EINVAL;

	mode = wIndex >> 8;
	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
	reg &= ~DWC3_DCTL_TSTCTRL_MASK;

	switch (mode) {
	case TEST_J:
	case TEST_K:
	case TEST_SE0_NAK:
	case TEST_PACKET:
	case TEST_FORCE_EN:
	reg \|= mode << 1;
	break;
	default:
	return -EINVAL;
	}
	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
	break;
	default:
	return -EINVAL;
	}
	break;

	case USB_RECIP_INTERFACE:
	switch (wValue) {
	case USB_INTRF_FUNC_SUSPEND:
	if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
	/* XXX enable Low power suspend */
	;
	if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
	/* XXX enable remote wakeup */
	;
	break;
	default:
	return -EINVAL;
	}
	break;

	case USB_RECIP_ENDPOINT:
	switch (wValue) {
	case USB_ENDPOINT_HALT:

	dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
	if (!dep)
	return -EINVAL;
	ret = __dwc3_gadget_ep_set_halt(dep, set);
	if (ret)
	return -EINVAL;
	break;
	default:
	return -EINVAL;
	}
	break;

	default:
	return -EINVAL;
	};

	return 0;
	}

	static int dwc3_ep0_set_address(struct dwc3 dwc, struct usb_ctrlrequest ctrl)
	{
	u32 addr;
	u32 reg;

	addr = le16_to_cpu(ctrl->wValue);
	if (addr > 127)
	return -EINVAL;

	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
	reg &= ~(DWC3_DCFG_DEVADDR_MASK);
	reg \|= DWC3_DCFG_DEVADDR(addr);
	dwc3_writel(dwc->regs, DWC3_DCFG, reg);

	if (addr)
	dwc->dev_state = DWC3_ADDRESS_STATE;
	else
	dwc->dev_state = DWC3_DEFAULT_STATE;

	return 0;
	}

	static int dwc3_ep0_delegate_req(struct dwc3 dwc, struct usb_ctrlrequest ctrl)
	{
	int ret;

	spin_unlock(&dwc->lock);
	ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
	spin_lock(&dwc->lock);
	return ret;
	}

	static int dwc3_ep0_set_config(struct dwc3 dwc, struct usb_ctrlrequest ctrl)
	{
	u32 cfg;
	int ret;

	dwc->start_config_issued = false;
	cfg = le16_to_cpu(ctrl->wValue);

	switch (dwc->dev_state) {
	case DWC3_DEFAULT_STATE:
	return -EINVAL;
	break;

	case DWC3_ADDRESS_STATE:
	ret = dwc3_ep0_delegate_req(dwc, ctrl);
	/* if the cfg matches and the cfg is non zero */
	if (!ret && cfg)
	dwc->dev_state = DWC3_CONFIGURED_STATE;
	break;

	case DWC3_CONFIGURED_STATE:
	ret = dwc3_ep0_delegate_req(dwc, ctrl);
	if (!cfg)
	dwc->dev_state = DWC3_ADDRESS_STATE;
	break;
	}
	return 0;
	}

	static int dwc3_ep0_std_request(struct dwc3 dwc, struct usb_ctrlrequest ctrl)
	{
	int ret;

	switch (ctrl->bRequest) {
	case USB_REQ_GET_STATUS:
	dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
	ret = dwc3_ep0_handle_status(dwc, ctrl);
	break;
	case USB_REQ_CLEAR_FEATURE:
	dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
	ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
	break;
	case USB_REQ_SET_FEATURE:
	dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
	ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
	break;
	case USB_REQ_SET_ADDRESS:
	dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
	ret = dwc3_ep0_set_address(dwc, ctrl);
	break;
	case USB_REQ_SET_CONFIGURATION:
	dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
	ret = dwc3_ep0_set_config(dwc, ctrl);
	break;
	default:
	dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
	ret = dwc3_ep0_delegate_req(dwc, ctrl);
	break;
	};

	return ret;
	}

	static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
	int ret;
	u32 len;

	if (!dwc->gadget_driver)
	goto err;

	len = le16_to_cpu(ctrl->wLength);
	if (!len) {
	dwc->three_stage_setup = false;
	dwc->ep0_expect_in = false;
	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
	} else {
	dwc->three_stage_setup = true;
	dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
	dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
	}

	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
	ret = dwc3_ep0_std_request(dwc, ctrl);
	else
	ret = dwc3_ep0_delegate_req(dwc, ctrl);

	if (ret >= 0)
	return;

	err:
	dwc3_ep0_stall_and_restart(dwc);
	}

	static void dwc3_ep0_complete_data(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	struct dwc3_request *r = NULL;
	struct usb_request *ur;
	struct dwc3_trb trb;
	struct dwc3_ep *dep;
	u32 transferred;
	u8 epnum;

	epnum = event->endpoint_number;
	dep = dwc->eps[epnum];

	dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;

	if (!dwc->ep0_status_pending) {
	r = next_request(&dwc->eps[0]->request_list);
	ur = &r->request;
	} else {
	ur = &dwc->ep0_usb_req;
	dwc->ep0_status_pending = 0;
	}

	dwc3_trb_to_nat(dwc->ep0_trb, &trb);

	if (dwc->ep0_bounced) {
	struct dwc3_ep *ep0 = dwc->eps[0];

	transferred = min_t(u32, ur->length,
	ep0->endpoint.maxpacket - trb.length);
	memcpy(ur->buf, dwc->ep0_bounce, transferred);
	dwc->ep0_bounced = false;
	} else {
	transferred = ur->length - trb.length;
	ur->actual += transferred;
	}

	if ((epnum & 1) && ur->actual < ur->length) {
	/* for some reason we did not get everything out */

	dwc3_ep0_stall_and_restart(dwc);
	} else {
	/*
	* handle the case where we have to send a zero packet. This
	* seems to be case when req.length > maxpacket. Could it be?
	*/
	if (r)
	dwc3_gadget_giveback(dep, r, 0);
	}
	}

	static void dwc3_ep0_complete_req(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	struct dwc3_request *r;
	struct dwc3_ep *dep;

	dep = dwc->eps[0];

	if (!list_empty(&dep->request_list)) {
	r = next_request(&dep->request_list);

	dwc3_gadget_giveback(dep, r, 0);
	}

	dwc->ep0state = EP0_SETUP_PHASE;
	dwc3_ep0_out_start(dwc);
	}

	static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	struct dwc3_ep *dep = dwc->eps[event->endpoint_number];

	dep->flags &= ~DWC3_EP_BUSY;

	switch (dwc->ep0state) {
	case EP0_SETUP_PHASE:
	dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
	dwc3_ep0_inspect_setup(dwc, event);
	break;

	case EP0_DATA_PHASE:
	dev_vdbg(dwc->dev, "Data Phase\n");
	dwc3_ep0_complete_data(dwc, event);
	break;

	case EP0_STATUS_PHASE:
	dev_vdbg(dwc->dev, "Status Phase\n");
	dwc3_ep0_complete_req(dwc, event);
	break;
	default:
	WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
	}
	}

	static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	dwc->ep0state = EP0_SETUP_PHASE;
	dwc3_ep0_out_start(dwc);
	}

	static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	struct dwc3_ep *dep;
	struct dwc3_request *req;
	int ret;

	dep = dwc->eps[0];
	dwc->ep0state = EP0_DATA_PHASE;

	if (dwc->ep0_status_pending) {
	dwc3_ep0_send_status_response(dwc);
	return;
	}

	if (list_empty(&dep->request_list)) {
	dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
	dep->flags \|= DWC3_EP_PENDING_REQUEST;

	if (event->endpoint_number)
	dep->flags \|= DWC3_EP0_DIR_IN;
	return;
	}

	req = next_request(&dep->request_list);
	req->direction = !!event->endpoint_number;

	dwc->ep0state = EP0_DATA_PHASE;
	if (req->request.length == 0) {
	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
	dwc->ctrl_req_addr, 0,
	DWC3_TRBCTL_CONTROL_DATA);
	} else if ((req->request.length % dep->endpoint.maxpacket)
	&& (event->endpoint_number == 0)) {
	dwc3_map_buffer_to_dma(req);

	WARN_ON(req->request.length > dep->endpoint.maxpacket);

	dwc->ep0_bounced = true;

	/*
	* REVISIT in case request length is bigger than EP0
	* wMaxPacketSize, we will need two chained TRBs to handle
	* the transfer.
	*/
	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
	dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
	DWC3_TRBCTL_CONTROL_DATA);
	} else {
	dwc3_map_buffer_to_dma(req);

	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
	req->request.dma, req->request.length,
	DWC3_TRBCTL_CONTROL_DATA);
	}

	WARN_ON(ret < 0);
	}

	static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	u32 type;
	int ret;

	dwc->ep0state = EP0_STATUS_PHASE;

	type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
	: DWC3_TRBCTL_CONTROL_STATUS2;

	ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
	dwc->ctrl_req_addr, 0, type);

	WARN_ON(ret < 0);
	}

	static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
	const struct dwc3_event_depevt *event)
	{
	switch (event->status) {
	case DEPEVT_STATUS_CONTROL_SETUP:
	dev_vdbg(dwc->dev, "Control Setup\n");
	dwc3_ep0_do_control_setup(dwc, event);
	break;

	case DEPEVT_STATUS_CONTROL_DATA:
	dev_vdbg(dwc->dev, "Control Data\n");

	if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
	dev_vdbg(dwc->dev, "Expected %d got %d\n",
	dwc->ep0_next_event,
	DWC3_EP0_NRDY_DATA);

	dwc3_ep0_stall_and_restart(dwc);
	return;
	}

	/*
	* One of the possible error cases is when Host _does_
	* request for Data Phase, but it does so on the wrong
	* direction.
	*
	* Here, we already know ep0_next_event is DATA (see above),
	* so we only need to check for direction.
	*/
	if (dwc->ep0_expect_in != event->endpoint_number) {
	dev_vdbg(dwc->dev, "Wrong direction for Data phase\n");
	dwc3_ep0_stall_and_restart(dwc);
	return;
	}

	dwc3_ep0_do_control_data(dwc, event);
	break;

	case DEPEVT_STATUS_CONTROL_STATUS:
	dev_vdbg(dwc->dev, "Control Status\n");

	if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
	dev_vdbg(dwc->dev, "Expected %d got %d\n",
	dwc->ep0_next_event,
	DWC3_EP0_NRDY_STATUS);

	dwc3_ep0_stall_and_restart(dwc);
	return;
	}
	dwc3_ep0_do_control_status(dwc, event);
	}
	}

	void dwc3_ep0_interrupt(struct dwc3 *dwc,
	const const struct dwc3_event_depevt *event)
	{
	u8 epnum = event->endpoint_number;

	dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
	dwc3_ep_event_string(event->endpoint_event),
	epnum >> 1, (epnum & 1) ? "in" : "out",
	dwc3_ep0_state_string(dwc->ep0state));

	switch (event->endpoint_event) {
	case DWC3_DEPEVT_XFERCOMPLETE:
	dwc3_ep0_xfer_complete(dwc, event);
	break;

	case DWC3_DEPEVT_XFERNOTREADY:
	dwc3_ep0_xfernotready(dwc, event);
	break;

	case DWC3_DEPEVT_XFERINPROGRESS:
	case DWC3_DEPEVT_RXTXFIFOEVT:
	case DWC3_DEPEVT_STREAMEVT:
	case DWC3_DEPEVT_EPCMDCMPLT:
	break;
	}
	}