blob: bd48f090165486da77ac40f22eecaf35dde3a039 [file] [log] [blame]
/*
* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "apq8053-lite.dtsi"
#include "msm8953-pinctrl.dtsi"
#include "apq8053-camera-sensor-dragon.dtsi"
#include "pmi8950.dtsi"
#include "msm8953-pmi8950.dtsi"
&soc {
vreg_5p0: vreg_5p0 {
compatible = "regulator-fixed";
regulator-name = "vreg_5p0";
status = "ok";
enable-active-high;
};
eldo_cam0_vreg: eldo_cam0_vreg {
compatible = "regulator-fixed";
regulator-name = "eldo_cam0_vreg";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
status = "ok";
enable-active-high;
vin-supply = <&pm8953_l5>;
};
eldo_cam1_vreg: eldo_cam1_vreg {
compatible = "regulator-fixed";
regulator-name = "eldo_cam1_vreg";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
status = "ok";
enable-active-high;
vin-supply = <&pm8953_l5>;
};
eldo_cam2_vreg: eldo_cam2_vreg {
compatible = "regulator-fixed";
regulator-name = "eldo_cam2_vreg";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
status = "ok";
enable-active-high;
vin-supply = <&pm8953_l5>;
};
eldo_cam1_vcm_vreg: eldo_cam1_vcm_vreg {
compatible = "regulator-fixed";
regulator-name = "eldo_cam1_vcm_vreg";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
status = "ok";
enable-active-high;
};
cnss_sdio: qcom,cnss_sdio {
compatible = "qcom,cnss_sdio";
subsys-name = "AR6320";
/**
* There is no vdd-wlan on board and this is not for DSRC.
* IO and XTAL share the same vreg.
*/
vdd-wlan-io-supply = <&pm8953_l6>;
qcom,wlan-ramdump-dynamic = <0x200000>;
qcom,msm-bus,name = "msm-cnss";
qcom,msm-bus,num-cases = <4>;
qcom,msm-bus,num-paths = <1>;
qcom,msm-bus,vectors-KBps =
<79 512 0 0>, /* No vote */
<79 512 6250 200000>, /* 50 Mbps */
<79 512 25000 200000>, /* 200 Mbps */
<79 512 2048000 4096000>; /* MAX */
};
bluetooth: bt_qca9379 {
compatible = "qca,qca6174";
qca,bt-reset-gpio = <&tlmm 76 0>; /* BT_EN */
};
cdc_dmic_gpios: cdc_dmic_pinctrl {
compatible = "qcom,msm-cdc-pinctrl";
pinctrl-names = "aud_active", "aud_sleep";
pinctrl-0 = <&cdc_dmic0_clk_act &cdc_dmic0_data_act>;
pinctrl-1 = <&cdc_dmic0_clk_sus &cdc_dmic0_data_sus>;
};
cdc_quat_mi2s_gpios: msm_cdc_pinctrl_quat {
compatible = "qcom,msm-cdc-pinctrl";
pinctrl-names = "aud_active", "aud_sleep";
pinctrl-0 = <&sec_tlmm_lines_act>;
pinctrl-1 = <&sec_tlmm_lines_sus>;
};
};
&firmware {
android {
vbmeta {
compatible = "android,vbmeta";
parts = "vbmeta,boot,system,vendor,bluetooth,modem,oem";
};
fstab {
/delete-node/ system;
vendor {
fsmgr_flags = "wait,slotselect,avb";
};
};
};
};
&rpm_bus {
rpm-regulator-ldoa4 {
compatible = "qcom,rpm-smd-regulator-resource";
qcom,resource-name = "ldoa";
qcom,resource-id = <4>;
qcom,regulator-type = <0>;
qcom,hpm-min-load = <10000>;
status = "okay";
pm8953_l4: regulator-l4 {
compatible = "qcom,rpm-smd-regulator";
regulator-name = "pm8953_l4";
qcom,set = <3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,init-voltage = <1800000>;
status = "okay";
};
};
};
&int_codec {
status = "ok";
qcom,model = "msm8953-openq624-snd-card";
/delete-property/ qcom,cdc-us-euro-gpios;
qcom,msm-hs-micbias-type = "internal";
qcom,audio-routing =
"RX_BIAS", "MCLK",
"SPK_RX_BIAS", "MCLK",
"INT_LDO_H", "MCLK",
"MIC BIAS Internal1", "Handset Mic",
"MIC BIAS Internal2", "Headset Mic",
"MIC BIAS Internal1", "Secondary Mic",
"AMIC1", "MIC BIAS Internal1",
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS Internal1",
"DMIC1", "MIC BIAS Internal1",
"MIC BIAS Internal1", "Digital Mic1",
"DMIC2", "MIC BIAS Internal1",
"MIC BIAS Internal1", "Digital Mic2";
qcom,quat-mi2s-gpios = <&cdc_quat_mi2s_gpios>;
qcom,cdc-dmic-gpios = <&cdc_dmic_gpios>;
/delete-property/ asoc-wsa-codec-names;
/delete-property/ asoc-wsa-codec-prefixes;
/delete-property/ msm-vdd-wsa-switch-supply;
/delete-property/ qcom,msm-vdd-wsa-switch-voltage;
/delete-property/ qcom,msm-vdd-wsa-switch-current;
};
&spi_3 {
status = "disabled";
};
&i2c_1 {
status = "okay";
};
&i2c_2 {
status = "okay";
};
&i2c_3 {
status = "okay";
himax_ts@48 {
compatible = "himax,hxcommon";
reg = <0x48>;
interrupt-parent = <&tlmm>;
interrupts = <65 0x2>;
vdd-supply = <&pm8953_l10>;
avdd-supply = <&pm8953_l5>;
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
"pmx_ts_release";
pinctrl-0 = <&ts_int_active &ts_reset_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
pinctrl-2 = <&ts_release>;
himax,panel-coords = <0 800 0 1280>;
himax,display-coords = <0 800 0 1280>;
himax,irq-gpio = <&tlmm 65 0x2008>;
report_type = <1>;
};
};
&soc {
/delete-node/ hbtp;
};
&i2c_5 {
status = "disabled";
};
#include "msm8953-mdss-panels.dtsi"
&mdss_mdp {
qcom,mdss-pref-prim-intf = "dsi";
};
&mdss_dsi {
hw-config = "single_dsi";
};
&mdss_dsi_active {
mux {
pins = "gpio61", "gpio100";
function = "gpio";
};
config {
pins = "gpio61", "gpio100";
drive-strength = <8>;
bias-disable = <0>;
output-high;
};
};
&mdss_dsi_suspend {
mux {
pins = "gpio61", "gpio100";
function = "gpio";
};
config {
pins = "gpio61", "gpio100";
drive-strength = <2>;
bias-pull-down;
};
};
&mdss_dsi0 {
qcom,dsi-pref-prim-pan = <&dsi_boyi_hx83100a_800p_video>;
pinctrl-names = "mdss_default", "mdss_sleep";
pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;
vdd-supply = <&pm8953_l10>;
vddio-supply = <&pm8953_l6>;
lab-supply = <&lab_regulator>;
ibb-supply = <&ibb_regulator>;
qcom,platform-te-gpio = <&tlmm 24 0>;
qcom,platform-reset-gpio = <&tlmm 61 0>;
qcom,platform-bklight-en-gpio = <&tlmm 100 0>;
};
&mdss_dsi1 {
status = "disabled";
};
&labibb {
status = "okay";
qpnp,qpnp-labibb-mode = "lcd";
};
&wled {
qcom,cons-sync-write-delay-us = <1000>;
qcom,led-strings-list = [00 01 02 03];
};
&blsp1_uart0 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&uart_console_active>;
};
&sdhc_1 {
/* device core power supply */
vdd-supply = <&pm8953_l8>;
qcom,vdd-voltage-level = <2900000 2900000>;
qcom,vdd-current-level = <200 570000>;
/* device communication power supply */
vdd-io-supply = <&pm8953_l5>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000
384000000>;
qcom,nonremovable;
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
status = "ok";
};
&tlmm{
sdc2_wlan_gpio_on: sdc2_wlan_gpio_on {
mux {
pins = "gpio75";
function = "gpio";
};
config {
pins = "gpio75";
drive-strength = <10>;
bias-pull-up;
output-low;
};
};
sdc2_wlan_gpio_off: sdc2_wlan_gpio_off {
mux {
pins = "gpio75";
function = "gpio";
};
config {
pins = "gpio75";
drive-strength = <2>;
bias-disable;
output-low;
};
};
};
&sdhc_2 {
/* device communication power supply */
vdd-io-supply = <&pm8953_l12>;
qcom,vdd-io-always-on;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 22000>;
qcom,core_3_0v_support;
qcom,nonremovable;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_wlan_gpio_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
&sdc2_wlan_gpio_off>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
status = "ok";
};
&spmi_bus {
qcom,pm8953@0 {
qcom,power-on@800 {
qcom,resin-gpiobase = <1019>;
qcom,pon_2 {
/delete-property/ linux,code;
};
};
};
qcom,pmi8950@2 {
qcom,leds@a100 {
compatible = "qcom,leds-qpnp";
reg = <0xa100 0x100>;
label = "mpp";
qcom,led_mpp_2 {
label = "mpp";
linux,name = "green";
linux,default-trigger = "none";
qcom,default-state = "off";
qcom,max-current = <40>;
qcom,current-setting = <5>;
qcom,id = <6>;
qcom,mode = "manual";
qcom,source-sel = <1>;
qcom,mode-ctrl = <0x60>;
};
};
qcom,leds@a300 {
compatible = "qcom,leds-qpnp";
reg = <0xa300 0x100>;
label = "mpp";
qcom,led_mpp_4 {
label = "mpp";
linux,name = "blue";
linux,default-trigger = "none";
qcom,default-state = "off";
qcom,max-current = <40>;
qcom,current-setting = <5>;
qcom,id = <6>;
qcom,mode = "manual";
qcom,source-sel = <1>;
qcom,mode-ctrl = <0x60>;
};
};
};
};
&pm8953_typec {
ss-mux-supply = <&pm8953_l13>;
qcom,ssmux-gpio = <&tlmm 139 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&typec_ssmux_config>;
};
/{
mtp_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "batterydata-itech-3000mah.dtsi"
#include "batterydata-ascent-3450mAh.dtsi"
};
};
&pmi_haptic{
status = "disabled";
qcom,actuator-type = "lra";
qcom,lra-auto-res-mode="qwd";
qcom,lra-high-z="opt1";
qcom,lra-res-cal-period = <0>;
qcom,wave-play-rate-us = <4165>;
};
&flash_led {
status = "disabled";
};
&pm8953_pwm {
status = "ok";
};
&pm8953_vadc {
/delete-node/ chan@13;
};
&pmi8950_gpios {
pinctrl-names = "default";
pinctrl-0 = <&pmi_gpio1_default>;
pmi_gpio1_default: pmi8950_gpio1 {
pins = "gpio1";
function = "normal";
input-enable;
power-source = <0>;
status = "okay";
};
};
&pmi8950_mpps {
pinctrl-names = "default";
pinctrl-0 = <&ext_fet_wled_pwr_en_default>;
ext_fet_wled_pwr_en_default: pmi8950_mpp3 {
pins = "mpp3"; /* MPP_3 */
function = "digital"; /* Digital */
output-high; /* Output */
drive-strength = <2>; /* 1.8 mA */
power-source = <1>;
bias-disable = <0>; /* no pull */
status = "okay";
};
};
&pm8953_gpios {
pinctrl-names = "default";
pinctrl-0 = <&pm_gpio1_div_clk2_default>;
pm_gpio1_div_clk2_default: pm8953_gpio1 {
pins = "gpio1";
function = "normal";
output-high;
power-source = <1>;
status = "okay";
};
};
&pm8953_mpps {
pinctrl-names = "default";
pinctrl-0 = <&pm_mpp4_wled_pwm_ctrl_default>;
pm_mpp4_wled_pwm_ctrl_default: pm8953_mpp4 {
pins = "mpp4"; /* WLED_PWM_CTRL */
function = "digital"; /* Digital */
output-high; /* Output */
drive-strength = <2>; /* 1.8 mA */
power-source = <0>; /* VPH_PWR */
qcom,dtest = <1>; /* DTEST1 */
bias-disable = <0>; /* no pull */
status = "okay";
};
};