[media] rename drivers/media/IR to drives/media/rc
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
new file mode 100644
index 0000000..d05003d
--- /dev/null
+++ b/drivers/media/rc/Kconfig
@@ -0,0 +1,167 @@
+menuconfig IR_CORE
+ tristate "Infrared remote controller adapters"
+ depends on INPUT
+ default INPUT
+ ---help---
+ Enable support for Remote Controllers on Linux. This is
+ needed in order to support several video capture adapters.
+
+ Enable this option if you have a video capture board even
+ if you don't need IR, as otherwise, you may not be able to
+ compile the driver for your adapter.
+
+config IR_LEGACY
+ tristate
+ depends on IR_CORE
+ default IR_CORE
+
+if IR_CORE
+
+config LIRC
+ tristate
+ default y
+
+ ---help---
+ Enable this option to build the Linux Infrared Remote
+ Control (LIRC) core device interface driver. The LIRC
+ interface passes raw IR to and from userspace, where the
+ LIRC daemon handles protocol decoding for IR reception and
+ encoding for IR transmitting (aka "blasting").
+
+source "drivers/media/rc/keymaps/Kconfig"
+
+config IR_NEC_DECODER
+ tristate "Enable IR raw decoder for the NEC protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with NEC protocol, and
+ if the IR is decoded in software
+
+config IR_RC5_DECODER
+ tristate "Enable IR raw decoder for the RC-5 protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with RC-5 protocol, and
+ if the IR is decoded in software
+
+config IR_RC6_DECODER
+ tristate "Enable IR raw decoder for the RC6 protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the RC6 protocol, and you need software decoding support.
+
+config IR_JVC_DECODER
+ tristate "Enable IR raw decoder for the JVC protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the JVC protocol, and you need software decoding support.
+
+config IR_SONY_DECODER
+ tristate "Enable IR raw decoder for the Sony protocol"
+ depends on IR_CORE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the Sony protocol, and you need software decoding support.
+
+config IR_RC5_SZ_DECODER
+ tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with RC-5 (streamzap) protocol,
+ and if the IR is decoded in software. (The Streamzap PC Remote
+ uses an IR protocol that is almost standard RC-5, but not quite,
+ as it uses an additional bit).
+
+config IR_LIRC_CODEC
+ tristate "Enable IR to LIRC bridge"
+ depends on IR_CORE
+ depends on LIRC
+ default y
+
+ ---help---
+ Enable this option to pass raw IR to and from userspace via
+ the LIRC interface.
+
+config IR_ENE
+ tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by ENE.
+
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
+
+config IR_IMON
+ tristate "SoundGraph iMON Receiver and Display"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+ IR Receiver and/or LCD/VFD/VGA display.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imon.
+
+config IR_MCEUSB
+ tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Windows Media Center Edition
+ eHome Infrared Transceiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mceusb.
+
+config IR_NUVOTON
+ tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by Nuvoton (formerly Winbond). This chip is
+ found in the ASRock ION 330HT, as well as assorted Intel
+ DP55-series motherboards (and of course, possibly others).
+
+ To compile this driver as a module, choose M here: the
+ module will be called nuvoton-cir.
+
+config IR_STREAMZAP
+ tristate "Streamzap PC Remote IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
+
+endif #IR_CORE