[MIPS] TXx9: PCI fixes for tx3927/tx4927
* Fix tx3927 pci ops for Type-1 configuration
* Fix abort checking of tx3927 pci ops
* Flush write buffer to avoid spurious PCI error interrupt
* Add a quirk for FPCIB backplane
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 8a17a39..c6bd79e 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -41,41 +41,41 @@
#include <asm/addrspace.h>
#include <asm/txx9/tx3927.h>
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
- unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
{
- if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
- ((dev_fn & 0xff) << 0x08) |
- (where & 0xfc);
+ if (bus->parent == NULL &&
+ devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+ return -1;
+ tx3927_pcicptr->ica =
+ ((bus->number & 0xff) << 0x10) |
+ ((devfn & 0xff) << 0x08) |
+ (where & 0xfc) | (bus->parent ? 1 : 0);
/* clear M_ABORT and Disable M_ABORT Int. */
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
- return PCIBIOS_SUCCESSFUL;
+ return 0;
}
static inline int check_abort(void)
{
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+ if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+ /* flush write buffer */
+ iob();
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ }
return PCIBIOS_SUCCESSFUL;
}
static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 * val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where)) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
switch (size) {
case 1:
@@ -97,11 +97,8 @@
static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
- int ret;
-
- ret = mkaddr(bus->number, devfn, where);
- if (ret)
- return ret;
+ if (mkaddr(bus, devfn, where))
+ return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
@@ -117,11 +114,6 @@
tx3927_pcicptr->icd = cpu_to_le32(val);
}
- if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
- tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
- tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
- return PCIBIOS_DEVICE_NOT_FOUND;
-
return check_abort();
}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index c6b49bc..6d84409 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -85,6 +85,8 @@
__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
| (PCI_STATUS_REC_MASTER_ABORT << 16),
&pcicptr->pcistatus);
+ /* flush write buffer */
+ iob();
code = PCIBIOS_DEVICE_NOT_FOUND;
}
return code;
@@ -406,3 +408,35 @@
tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
}
}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+ struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+ if (!pcicptr)
+ return;
+ if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+ /* Reset Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+ /*
+ * swap reqBP and reqXP (raise priority of SLC90E66).
+ * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+ * PCI Backplane board.
+ */
+ __raw_writel(0x72543610, &pcicptr->pbareqport);
+ __raw_writel(0, &pcicptr->pbabm);
+ /* Use Fixed ParkMaster (required by SLC90E66) */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+ /* Enable Bus Arbiter */
+ __raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+ TX4927_PCIC_PBACFG_PBAEN,
+ &pcicptr->pbacfg);
+ printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+ __raw_readl(&pcicptr->pbareqport));
+ }
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+ tx4927_quirk_slc90e66_bridge);
+#endif