| Text file for the Linux SysKonnect Token Ring ISA/PCI Adapter Driver. |
| Text file by: Jay Schulist <jschlst@samba.org> |
| |
| The Linux SysKonnect Token Ring driver works with the SysKonnect TR4/16(+) ISA, |
| SysKonnect TR4/16(+) PCI, SysKonnect TR4/16 PCI, and older revisions of the |
| SK NET TR4/16 ISA card. |
| |
| Latest information on this driver can be obtained on the Linux-SNA WWW site. |
| Please point your browser to: |
| http://www.linux-sna.org |
| |
| Many thanks to Christoph Goos for his excellent work on this driver and |
| SysKonnect for donating the adapters to Linux-SNA for the testing and |
| maintenance of this device driver. |
| |
| Important information to be noted: |
| 1. Adapters can be slow to open (~20 secs) and close (~5 secs), please be |
| patient. |
| 2. This driver works very well when autoprobing for adapters. Why even |
| think about those nasty io/int/dma settings of modprobe when the driver |
| will do it all for you! |
| |
| This driver is rather simple to use. Select Y to Token Ring adapter support |
| in the kernel configuration. A choice for SysKonnect Token Ring adapters will |
| appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this |
| option. I personally recommend compiling the driver as a module (M), but if you |
| you would like to compile it statically answer Y instead. |
| |
| This driver supports multiple adapters without the need to load multiple copies |
| of the driver. You should be able to load up to 7 adapters without any kernel |
| modifications, if you are in need of more please contact the maintainer of this |
| driver. |
| |
| Load the driver either by lilo/loadlin or as a module. When a module using the |
| following command will suffice for most: |
| |
| # modprobe sktr |
| |
| This will produce output similar to the following: (Output is user specific) |
| |
| sktr.c: v1.01 08/29/97 by Christoph Goos |
| tr0: SK NET TR 4/16 PCI found at 0x6100, using IRQ 17. |
| tr1: SK NET TR 4/16 PCI found at 0x6200, using IRQ 16. |
| tr2: SK NET TR 4/16 ISA found at 0xa20, using IRQ 10 and DMA 5. |
| |
| Now just setup the device via ifconfig and set and routes you may have. After |
| this you are ready to start sending some tokens. |
| |
| Errata: |
| For anyone wondering where to pick up the SysKonnect adapters please browse |
| to http://www.syskonnect.com |
| |
| This driver is under the GNU General Public License. Its Firmware image is |
| included as an initialized C-array and is licensed by SysKonnect to the Linux |
| users of this driver. However no warranty about its fitness is expressed or |
| implied by SysKonnect. |
| |
| Below find attached the setting for the SK NET TR 4/16 ISA adapters |
| ------------------------------------------------------------------- |
| |
| *************************** |
| *** C O N T E N T S *** |
| *************************** |
| |
| 1) Location of DIP-Switch W1 |
| 2) Default settings |
| 3) DIP-Switch W1 description |
| |
| |
| ============================================================== |
| CHAPTER 1 LOCATION OF DIP-SWITCH |
| ============================================================== |
| |
| UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ |
| þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ |
| þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ |
| þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿ |
| þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ |
| þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU |
| þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ |
| þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿ |
| þAÄÄÄÄÄÄU þ þ þ þ |
| þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ |
| þ þ þ |
| þ AÄU |
| þ þ |
| þ þ |
| þ þ |
| þ þ |
| AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU |
| AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU |
| |
| ============================================================== |
| CHAPTER 2 DEFAULT SETTINGS |
| ============================================================== |
| |
| W1 1 2 3 4 5 6 7 8 |
| +------------------------------+ |
| | ON X | |
| | OFF X X X X X X X | |
| +------------------------------+ |
| |
| W1.1 = ON Adapter drives address lines SA17..19 |
| W1.2 - 1.5 = OFF BootROM disabled |
| W1.6 - 1.8 = OFF I/O address 0A20h |
| |
| ============================================================== |
| CHAPTER 3 DIP SWITCH W1 DESCRIPTION |
| ============================================================== |
| |
| UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON |
| þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ |
| AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF |
| |AD | BootROM Addr. | I/O | |
| +-+-+-------+-------+-----+-----+ |
| | | | |
| | | +------ 6 7 8 |
| | | ON ON ON 1900h |
| | | ON ON OFF 0900h |
| | | ON OFF ON 1980h |
| | | ON OFF OFF 0980h |
| | | OFF ON ON 1b20h |
| | | OFF ON OFF 0b20h |
| | | OFF OFF ON 1a20h |
| | | OFF OFF OFF 0a20h (+) |
| | | |
| | | |
| | +-------- 2 3 4 5 |
| | OFF x x x disabled (+) |
| | ON ON ON ON C0000 |
| | ON ON ON OFF C4000 |
| | ON ON OFF ON C8000 |
| | ON ON OFF OFF CC000 |
| | ON OFF ON ON D0000 |
| | ON OFF ON OFF D4000 |
| | ON OFF OFF ON D8000 |
| | ON OFF OFF OFF DC000 |
| | |
| | |
| +----- 1 |
| OFF adapter does NOT drive SA<17..19> |
| ON adapter drives SA<17..19> (+) |
| |
| |
| (+) means default setting |
| |
| ******************************** |