tty: istallion: tty port open/close methods
Slice/dice/repeat as with the stallion driver this is just code shuffling
and removal
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index babfd44..4cd6c52 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -213,7 +213,6 @@
* with the slave. Most of them need to be updated atomically, so always
* use the bit setting operations (unless protected by cli/sti).
*/
-#define ST_INITIALIZING 1
#define ST_OPENING 2
#define ST_CLOSING 3
#define ST_CMDING 4
@@ -783,13 +782,32 @@
/*****************************************************************************/
+/*
+ * On the first open of the device setup the port hardware, and
+ * initialize the per port data structure. Since initializing the port
+ * requires several commands to the board we will need to wait for any
+ * other open that is already initializing the port.
+ *
+ * Locking: protected by the port mutex.
+ */
+
+static int stli_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct stliport *portp = container_of(port, struct stliport, port);
+ struct stlibrd *brdp = stli_brds[portp->brdnr];
+ int rc;
+
+ if ((rc = stli_initopen(tty, brdp, portp)) >= 0)
+ clear_bit(TTY_IO_ERROR, &tty->flags);
+ wake_up_interruptible(&portp->raw_wait);
+ return rc;
+}
+
static int stli_open(struct tty_struct *tty, struct file *filp)
{
struct stlibrd *brdp;
struct stliport *portp;
- struct tty_port *port;
unsigned int minordev, brdnr, portnr;
- int rc;
minordev = tty->index;
brdnr = MINOR2BRD(minordev);
@@ -809,95 +827,56 @@
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
- port = &portp->port;
-
-/*
- * On the first open of the device setup the port hardware, and
- * initialize the per port data structure. Since initializing the port
- * requires several commands to the board we will need to wait for any
- * other open that is already initializing the port.
- *
- * Review - locking
- */
- tty_port_tty_set(port, tty);
- tty->driver_data = portp;
- port->count++;
-
- wait_event_interruptible(portp->raw_wait,
- !test_bit(ST_INITIALIZING, &portp->state));
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
- set_bit(ST_INITIALIZING, &portp->state);
- if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
- /* Locking */
- port->flags |= ASYNC_INITIALIZED;
- clear_bit(TTY_IO_ERROR, &tty->flags);
- }
- clear_bit(ST_INITIALIZING, &portp->state);
- wake_up_interruptible(&portp->raw_wait);
- if (rc < 0)
- return rc;
- }
- return tty_port_block_til_ready(&portp->port, tty, filp);
+ return tty_port_open(&portp->port, tty, filp);
}
+
/*****************************************************************************/
-static void stli_close(struct tty_struct *tty, struct file *filp)
+static void stli_shutdown(struct tty_port *port)
{
struct stlibrd *brdp;
- struct stliport *portp;
- struct tty_port *port;
+ unsigned long ftype;
unsigned long flags;
+ struct stliport *portp = container_of(port, struct stliport, port);
- portp = tty->driver_data;
+ if (portp->brdnr >= stli_nrbrds)
+ return;
+ brdp = stli_brds[portp->brdnr];
+ if (brdp == NULL)
+ return;
+
+ /*
+ * May want to wait for data to drain before closing. The BUSY
+ * flag keeps track of whether we are still transmitting or not.
+ * It is updated by messages from the slave - indicating when all
+ * chars really have drained.
+ */
+
+ if (!test_bit(ST_CLOSING, &portp->state))
+ stli_rawclose(brdp, portp, 0, 0);
+
+ spin_lock_irqsave(&stli_lock, flags);
+ clear_bit(ST_TXBUSY, &portp->state);
+ clear_bit(ST_RXSTOP, &portp->state);
+ spin_unlock_irqrestore(&stli_lock, flags);
+
+ ftype = FLUSHTX | FLUSHRX;
+ stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
+}
+
+static void stli_close(struct tty_struct *tty, struct file *filp)
+{
+ struct stliport *portp = tty->driver_data;
+ unsigned long flags;
if (portp == NULL)
return;
- port = &portp->port;
-
- if (tty_port_close_start(port, tty, filp) == 0)
- return;
-
-/*
- * May want to wait for data to drain before closing. The BUSY flag
- * keeps track of whether we are still transmitting or not. It is
- * updated by messages from the slave - indicating when all chars
- * really have drained.
- */
spin_lock_irqsave(&stli_lock, flags);
+ /* Flush any internal buffering out first */
if (tty == stli_txcooktty)
stli_flushchars(tty);
spin_unlock_irqrestore(&stli_lock, flags);
-
- /* We end up doing this twice for the moment. This needs looking at
- eventually. Note we still use portp->closing_wait as a result */
- if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, portp->closing_wait);
-
- /* FIXME: port locking here needs attending to */
- port->flags &= ~ASYNC_INITIALIZED;
-
- brdp = stli_brds[portp->brdnr];
- stli_rawclose(brdp, portp, 0, 0);
- if (tty->termios->c_cflag & HUPCL) {
- stli_mkasysigs(&portp->asig, 0, 0);
- if (test_bit(ST_CMDING, &portp->state))
- set_bit(ST_DOSIGS, &portp->state);
- else
- stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 0);
- }
- clear_bit(ST_TXBUSY, &portp->state);
- clear_bit(ST_RXSTOP, &portp->state);
- set_bit(TTY_IO_ERROR, &tty->flags);
- tty_ldisc_flush(tty);
- set_bit(ST_DOFLUSHRX, &portp->state);
- stli_flushbuffer(tty);
-
- tty_port_close_end(port, tty);
- tty_port_tty_set(port, NULL);
+ tty_port_close(&portp->port, tty, filp);
}
/*****************************************************************************/
@@ -1724,6 +1703,7 @@
/*****************************************************************************/
+
/*
* Hangup this port. This is pretty much like closing the port, only
* a little more brutal. No waiting for data to drain. Shutdown the
@@ -1733,47 +1713,8 @@
static void stli_hangup(struct tty_struct *tty)
{
- struct stliport *portp;
- struct stlibrd *brdp;
- struct tty_port *port;
- unsigned long flags;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
- port = &portp->port;
-
- spin_lock_irqsave(&port->lock, flags);
- port->flags &= ~ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (!test_bit(ST_CLOSING, &portp->state))
- stli_rawclose(brdp, portp, 0, 0);
-
- spin_lock_irqsave(&stli_lock, flags);
- if (tty->termios->c_cflag & HUPCL) {
- stli_mkasysigs(&portp->asig, 0, 0);
- if (test_bit(ST_CMDING, &portp->state)) {
- set_bit(ST_DOSIGS, &portp->state);
- set_bit(ST_DOFLUSHTX, &portp->state);
- set_bit(ST_DOFLUSHRX, &portp->state);
- } else {
- stli_sendcmd(brdp, portp, A_SETSIGNALSF,
- &portp->asig, sizeof(asysigs_t), 0);
- }
- }
-
- clear_bit(ST_TXBUSY, &portp->state);
- clear_bit(ST_RXSTOP, &portp->state);
- set_bit(TTY_IO_ERROR, &tty->flags);
- spin_unlock_irqrestore(&stli_lock, flags);
-
- tty_port_hangup(port);
+ struct stliport *portp = tty->driver_data;
+ tty_port_hangup(&portp->port);
}
/*****************************************************************************/
@@ -4420,6 +4361,8 @@
static const struct tty_port_operations stli_port_ops = {
.carrier_raised = stli_carrier_raised,
.dtr_rts = stli_dtr_rts,
+ .activate = stli_activate,
+ .shutdown = stli_shutdown,
};
/*****************************************************************************/