i2c: bcm-iproc: make use of the new infrastructure for quirks
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Ray Jui <rjui@broadcom.com>
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index d3c8915..f9f2c20 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -160,14 +160,6 @@
u32 val;
unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MESC);
- /* need to reserve one byte in the FIFO for the slave address */
- if (msg->len > M_TX_RX_FIFO_SIZE - 1) {
- dev_err(iproc_i2c->device,
- "only support data length up to %u bytes\n",
- M_TX_RX_FIFO_SIZE - 1);
- return -EOPNOTSUPP;
- }
-
/* check if bus is busy */
if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
BIT(M_CMD_START_BUSY_SHIFT))) {
@@ -287,6 +279,12 @@
.functionality = bcm_iproc_i2c_functionality,
};
+static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
+ /* need to reserve one byte in the FIFO for the slave address */
+ .max_read_len = M_TX_RX_FIFO_SIZE - 1,
+ .max_write_len = M_TX_RX_FIFO_SIZE - 1,
+};
+
static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
{
unsigned int bus_speed;
@@ -413,6 +411,7 @@
i2c_set_adapdata(adap, iproc_i2c);
strlcpy(adap->name, "Broadcom iProc I2C adapter", sizeof(adap->name));
adap->algo = &bcm_iproc_algo;
+ adap->quirks = &bcm_iproc_i2c_quirks;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;