Merge branches 'sh/stable-updates' and 'sh/pci-rework'
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e7390dd..4c68fde 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -347,6 +347,16 @@
help
Select SH7723 if you have an SH-MobileR2 CPU.
+config CPU_SUBTYPE_SH7724
+ bool "Support SH7724 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_CMT
+ help
+ Select SH7724 if you have an SH-MobileR2R CPU.
+
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
@@ -495,6 +505,7 @@
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
CPU_SUBTYPE_SH7786
+ default "41666666" if CPU_SUBTYPE_SH7724
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index d1bee48..ebe9922 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -30,7 +30,6 @@
extern struct irq_chip systemasic_int;
extern void aica_time_init(void);
-extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
static void __init dreamcast_setup(char **cmdline_p)
@@ -51,11 +50,6 @@
handle_level_irq);
board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
- if (gapspci_init() < 0)
- printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
}
static struct sh_machine_vector mv_dreamcast __initmv = {
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3..e6f4341 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -3,5 +3,3 @@
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index 6287ae5..6e75bd4 100644
--- a/arch/sh/boards/mach-se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -34,8 +34,6 @@
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
@@ -46,8 +44,6 @@
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port)) & 0xff;
ctrl_delay();
@@ -58,8 +54,6 @@
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -71,8 +65,6 @@
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -85,8 +77,6 @@
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
@@ -95,8 +85,6 @@
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
@@ -106,8 +94,6 @@
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
@@ -118,8 +104,6 @@
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
deleted file mode 100644
index 203b292..0000000
--- a/arch/sh/boards/mach-se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return 13;
- case 1: return 13; /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 66ad292..b8d43b6 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -12,10 +12,13 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <mach-se/mach/se7780.h>
+#define INTC_BASE 0xffd00000
+#define INTC_ICR1 (INTC_BASE+0x1c)
+
/*
* Initialize IRQ setting
*/
@@ -43,4 +46,24 @@
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+ /* ICR1: detect low level(for 2ndcut) */
+ ctrl_outl(0xAAAA0000, INTC_ICR1);
+
+ /*
+ * FPGA PCISEL register initialize
+ *
+ * CPU || SLOT1 | SLOT2 | S-ATA | USB
+ * -------------------------------------
+ * INTA || INTA | INTD | -- | INTB
+ * -------------------------------------
+ * INTB || INTB | INTA | -- | INTC
+ * -------------------------------------
+ * INTC || INTC | INTB | INTA | --
+ * -------------------------------------
+ * INTD || INTD | INTC | -- | INTA
+ * -------------------------------------
+ */
+ ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+ ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
}
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f48242..476650e 100644
--- a/arch/sh/boards/mach-snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
@@ -36,8 +36,6 @@
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
@@ -48,8 +46,6 @@
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port))&0xff;
ctrl_delay();
@@ -60,8 +56,6 @@
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -73,8 +67,6 @@
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
@@ -87,8 +79,6 @@
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
@@ -97,8 +87,6 @@
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
@@ -108,8 +96,6 @@
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
@@ -120,8 +106,6 @@
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index dec3db0..15577ff 100644
--- a/arch/sh/boards/mach-systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
@@ -35,8 +35,6 @@
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
return *(volatile unsigned char *)ETHER_IOMAP(port);
else
@@ -49,8 +47,6 @@
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
v = *(volatile unsigned char *)ETHER_IOMAP(port);
else
@@ -63,8 +59,6 @@
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
@@ -78,8 +72,6 @@
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
@@ -94,8 +86,6 @@
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
@@ -106,8 +96,6 @@
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
@@ -119,8 +107,6 @@
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else if (port <= 0x3F1)
@@ -133,8 +119,6 @@
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4badad4..0130e98 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -17,8 +17,6 @@
{
if (PXSEG(port))
return ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
@@ -28,8 +26,6 @@
if (PXSEG(port))
v = ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
ctrl_delay();
@@ -40,8 +36,6 @@
{
if (PXSEG(port))
return ctrl_inw(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inw(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
@@ -53,8 +47,6 @@
{
if (PXSEG(port))
return ctrl_inl(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inl(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
@@ -66,8 +58,6 @@
{
if (PXSEG(port))
ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
@@ -76,8 +66,6 @@
{
if (PXSEG(port))
ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
ctrl_delay();
@@ -87,8 +75,6 @@
{
if (PXSEG(port))
ctrl_outw(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outw(value, pci_ioaddr(port));
else if (port >= 0x2000)
ctrl_outw(value, port2adr(port));
else
@@ -99,8 +85,6 @@
{
if (PXSEG(port))
ctrl_outl(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
@@ -117,10 +101,8 @@
void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
{
- if (PXSEG(port) || is_pci_memaddr(port))
+ if (PXSEG(port))
return (void __iomem *)port;
- else if (is_pci_ioaddr(port))
- return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
new file mode 100644
index 0000000..268d04e
--- /dev/null
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -0,0 +1,707 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 16 15:42:20 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
index 7e816ed..e8db585 100644
--- a/arch/sh/drivers/pci/Kconfig
+++ b/arch/sh/drivers/pci/Kconfig
@@ -17,21 +17,3 @@
code will not have to flush the CPU's caches. If you have a PCI host
bridge integrated with your SH CPU, refer carefully to the chip specs
to see if you can say 'N' here. Otherwise, leave it as 'Y'.
-
-# This is also board-specific
-config PCI_AUTO
- bool
- depends on PCI
- default y
-
-config PCI_AUTO_UPDATE_RESOURCES
- bool
- depends on PCI_AUTO
- default y if !SH_DREAMCAST
- help
- Selecting this option will cause the PCI auto code to leave your
- BAR values alone. Otherwise they will be updated automatically. If
- for some reason, you have a board that simply refuses to work
- with its resources updated beyond what they are when the device
- is powered up, set this to N. Everyone else will want this as Y.
-
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 847e9089..d2ffc47 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -1,9 +1,7 @@
#
# Makefile for the PCI specific kernel interface routines under Linux.
#
-
obj-y += pci.o
-obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
@@ -12,15 +10,17 @@
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
-obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o
-obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN) += ops-titan.o
-obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o
-obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o
-obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o
+obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
+ pci-dreamcast.o
+obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
+obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
+obj-$(CONFIG_SH_SH03) += fixups-sh03.o
+obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
+obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
+obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
+obj-$(CONFIG_SH_TITAN) += fixups-titan.o
+obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
+obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c
similarity index 88%
rename from arch/sh/drivers/pci/ops-cayman.c
rename to arch/sh/drivers/pci/fixups-cayman.c
index 38ef762..b68b61d 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/fixups-cayman.c
@@ -75,15 +75,3 @@
return result;
}
-
-struct pci_channel board_pci_channels[] = {
- { &sh5_pci_ops, NULL, NULL, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-int __init pcibios_init_platform(void)
-{
- return sh5pci_init(__pa(memory_start),
- __pa(memory_end) - __pa(memory_start));
-}
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index 2bf85cf..ed7f489 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -30,7 +30,7 @@
static void __init gapspci_fixup_resources(struct pci_dev *dev)
{
- struct pci_channel *p = board_pci_channels;
+ struct pci_channel *p = dev->sysdata;
printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
@@ -41,6 +41,13 @@
*/
dev->resource[1].start = p->io_resource->start + 0x100;
dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
+
+ /*
+ * This is not a normal BAR, prevent any attempts to move
+ * the BAR, as this will result in a bus lock.
+ */
+ dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
+
/*
* Redirect dma memory allocations to special memory window.
*/
diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c
new file mode 100644
index 0000000..bb1a6bb
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-landisk.c
@@ -0,0 +1,34 @@
+/*
+ * arch/sh/drivers/pci/ops-landisk.c
+ *
+ * PCI initialization for the I-O DATA Device, Inc. LANDISK board
+ *
+ * Copyright (C) 2006 kogiidena
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ /*
+ * slot0: pin1-4 = irq5,6,7,8
+ * slot1: pin1-4 = irq6,7,8,5
+ * slot2: pin1-4 = irq7,8,5,6
+ * slot3: pin1-4 = irq8,5,6,7
+ */
+ int irq = ((slot + pin - 1) & 0x3) + 5;
+
+ if ((slot | (pin - 1)) > 0x3) {
+ printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
+ slot, pin - 1 + 'A');
+ return -1;
+ }
+ return irq;
+}
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
deleted file mode 100644
index 1c1d412..0000000
--- a/arch/sh/drivers/pci/fixups-lboxre2.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-lboxre2.c
- *
- * L-BOX RE2 PCI fixups
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-int pci_fixup_pcic(void)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = ctrl_inl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(bcr1, SH4_PCIBCR1);
-
- /* Enable all interrupts, so we known what to fix */
- pci_write_reg(0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
- pci_write_reg(0xfb900047, SH7751_PCICONF1);
- pci_write_reg(0xab000001, SH7751_PCICONF4);
-
- mcr = ctrl_inl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(mcr, SH4_PCIMCR);
-
- pci_write_reg(0x0c000000, SH7751_PCICONF5);
- pci_write_reg(0xd0000000, SH7751_PCICONF6);
- pci_write_reg(0x0c000000, SH4_PCILAR0);
- pci_write_reg(0x00000000, SH4_PCILAR1);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c
index 3e321df..15ca65c 100644
--- a/arch/sh/drivers/pci/fixups-r7780rp.c
+++ b/arch/sh/drivers/pci/fixups-r7780rp.c
@@ -11,35 +11,26 @@
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include "pci-sh4.h"
-#include <asm/io.h>
-int pci_fixup_pcic(void)
+static char irq_tab[] __initdata = {
+ 65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- pci_write_reg(0x000043ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
+ return irq_tab[slot];
+}
- pci_write_reg(0xfbb00047, SH7780_PCICMD);
- pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
- pci_write_reg(0x00011912, SH7780_PCISVID);
- pci_write_reg(0x08000000, SH7780_PCICSCR0);
- pci_write_reg(0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
- pci_write_reg(0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
-
-#ifdef CONFIG_32BIT
- pci_write_reg(0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
-
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
- SH7780_PCIIOBR);
- pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+ pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
+ pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
+ pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
+ pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
+ pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
+ pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
return 0;
}
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index 904bce8..052b354 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -1,43 +1,67 @@
/*
* arch/sh/drivers/pci/fixups-rts7751r2d.c
*
- * RTS7751R2D PCI fixups
+ * RTS7751R2D / LBOXRE2 PCI fixups
*
* Copyright (C) 2003 Lineo uSolutions, Inc.
* Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/pci.h>
+#include <mach/lboxre2.h>
+#include <mach/r2d.h>
#include "pci-sh4.h"
+#include <asm/machtypes.h>
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-int pci_fixup_pcic(void)
+static u8 rts7751r2d_irq_tab[] __initdata = {
+ IRQ_PCI_INTA,
+ IRQ_PCI_INTB,
+ IRQ_PCI_INTC,
+ IRQ_PCI_INTD,
+};
+
+static char lboxre2_irq_tab[] __initdata = {
+ IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ if (mach_is_lboxre2())
+ return lboxre2_irq_tab[slot];
+ else
+ return rts7751r2d_irq_tab[slot];
+}
+
+int pci_fixup_pcic(struct pci_channel *chan)
{
unsigned long bcr1, mcr;
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(bcr1, SH4_PCIBCR1);
+ pci_write_reg(chan, bcr1, SH4_PCIBCR1);
/* Enable all interrupts, so we known what to fix */
- pci_write_reg(0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
+ pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
+ pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
- pci_write_reg(0xfb900047, SH7751_PCICONF1);
- pci_write_reg(0xab000001, SH7751_PCICONF4);
+ pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
+ pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(mcr, SH4_PCIMCR);
+ pci_write_reg(chan, mcr, SH4_PCIMCR);
- pci_write_reg(0x0c000000, SH7751_PCICONF5);
- pci_write_reg(0xd0000000, SH7751_PCICONF6);
- pci_write_reg(0x0c000000, SH4_PCILAR0);
- pci_write_reg(0x00000000, SH4_PCILAR1);
+ pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
+ pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
+ pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
+ pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
return 0;
}
diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c
index 2f88630..250b0ed 100644
--- a/arch/sh/drivers/pci/fixups-sdk7780.c
+++ b/arch/sh/drivers/pci/fixups-sdk7780.c
@@ -5,55 +5,48 @@
*
* Copyright (C) 2003 Lineo uSolutions, Inc.
* Copyright (C) 2004 - 2006 Paul Mundt
+ * Copyright (C) 2006 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include "pci-sh4.h"
-#include <asm/io.h>
-int pci_fixup_pcic(void)
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char sdk7780_irq_tab[4][16] __initdata = {
+ /* INTA */
+ { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTB */
+ { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTC */
+ { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTD */
+ { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
- ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
+ return sdk7780_irq_tab[pin-1][slot];
+}
+int pci_fixup_pcic(struct pci_channel *chan)
+{
/* Enable all interrupts, so we know what to fix */
- pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
- pci_write_reg(0x0000380F, SH7780_PCIAINTM);
+ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
/* Set up standard PCI config registers */
- pci_write_reg(0xFB00, SH7780_PCISTATUS);
- pci_write_reg(0x0047, SH7780_PCICMD);
- pci_write_reg(0x00, SH7780_PCIPIF);
- pci_write_reg(0x00, SH7780_PCISUB);
- pci_write_reg(0x06, SH7780_PCIBCC);
- pci_write_reg(0x1912, SH7780_PCISVID);
- pci_write_reg(0x0001, SH7780_PCISID);
+ pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
+ pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
+ pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
- pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
- pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
+ pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
+ pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
+ pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
- pci_write_reg(0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(0x00000000, SH7780_PCILAR1);
- pci_write_reg(0x00000000, SH7780_PCILSR1);
-
- pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
- pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
-
- /* Set IOBR for window containing area specified in pci.h */
- pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
- pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
-
- pci_write_reg(0xA5000C01, SH7780_PCICR);
+ pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
+ pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
return 0;
}
diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c
new file mode 100644
index 0000000..475fa9f
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-se7751.c
@@ -0,0 +1,111 @@
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return 13;
+ case 1: return 13; /* AMD Ethernet controller */
+ case 2: return -1;
+ case 3: return -1;
+ case 4: return -1;
+ default:
+ printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+ return -1;
+ }
+}
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description: This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+ unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+ unsigned short bcr2;
+
+ /*
+ * Initialize the slave bus controller on the pcic. The values used
+ * here should not be hardcoded, but they should be taken from the bsc
+ * on the processor, to make this function as generic as possible.
+ * (i.e. Another sbc may usr different SDRAM timing settings -- in order
+ * for the pcic to work, its settings need to be exactly the same.)
+ */
+ bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+ bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+ wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+ wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+ wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+ mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+ bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
+ (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+ bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
+ PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
+ PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
+ PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
+ PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
+
+
+ /* Enable all interrupts, so we know what to fix */
+ PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+ PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+ /* Set up standard PCI config registers */
+ PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
+ PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
+ PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
+ PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
+ PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
+ PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+ PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
+ PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
+ PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
+ PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
+
+ /* Now turn it on... */
+ PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+ /*
+ * Set PCIMBR and PCIIOBR here, assuming a single window
+ * (16M MEM, 256K IO) is enough. If a larger space is
+ * needed, the readx/writex and inx/outx functions will
+ * have to do more (e.g. setting registers for each call).
+ */
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use BUG_ON to
+ * catch erroneous assumption.
+ */
+ BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+
+ PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+
+ /* Set IOBR for window containing area specified in pci.h */
+ PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+
+ /* All done, may as well say so... */
+ printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+ return 1;
+}
diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c
deleted file mode 100644
index 880cea1..0000000
--- a/arch/sh/drivers/pci/fixups-se7780.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-se7780.c
- *
- * HITACHI UL Solution Engine 7780 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-#include <asm/io.h>
-
-int pci_fixup_pcic(void)
-{
- ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
- /* Enable all interrupts, so we know what to fix */
- pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
- pci_write_reg(0x0000380F, SH7780_PCIAINTM);
-
- /* Set up standard PCI config registers */
- ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
- ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
- ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF));
- ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB));
- ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC));
- ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
- ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
-
- pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
- pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
-
- pci_write_reg(0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(0x00000000, SH7780_PCILAR1);
- pci_write_reg(0x00000000, SH7780_PCILSR1);
-
- pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
- pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
-
- /* Set IOBR for window containing area specified in pci.h */
- pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
- pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
-
- pci_write_reg(0xA5000C01, SH7780_PCICR);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
deleted file mode 100644
index 4949e60..0000000
--- a/arch/sh/drivers/pci/fixups-sh7785lcr.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/sh/drivers/pci/fixups-sh7785lcr.c
- *
- * R0P7785LC0011RL PCI fixups
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * Based on arch/sh/drivers/pci/fixups-r7780rp.c
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-int pci_fixup_pcic(void)
-{
- pci_write_reg(0x000043ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(0xfbb00047, SH7780_PCICMD);
- pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
- pci_write_reg(0x00011912, SH7780_PCISVID);
- pci_write_reg(0x08000000, SH7780_PCICSCR0);
- pci_write_reg(0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
- pci_write_reg(0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
-
-#ifdef CONFIG_32BIT
- pci_write_reg(0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
-
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
- SH7780_PCIIOBR);
- pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
-
- return 0;
-}
diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c
new file mode 100644
index 0000000..5a39ecc
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-snapgear.c
@@ -0,0 +1,38 @@
+/*
+ * arch/sh/drivers/pci/ops-snapgear.c
+ *
+ * Author: David McCullough <davidm@snapgear.com>
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the SnapGear boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ int irq = -1;
+
+ switch (slot) {
+ case 8: /* the PCI bridge */ break;
+ case 11: irq = 8; break; /* USB */
+ case 12: irq = 11; break; /* PCMCIA */
+ case 13: irq = 5; break; /* eth0 */
+ case 14: irq = 8; break; /* eth1 */
+ case 15: irq = 11; break; /* safenet (unused) */
+ }
+
+ printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
+ slot, pin - 1 + 'A', irq);
+
+ return irq;
+}
diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c
new file mode 100644
index 0000000..3a79fa8
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-titan.c
@@ -0,0 +1,38 @@
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <mach/titan.h>
+#include "pci-sh4.h"
+
+static char titan_irq_tab[] __initdata = {
+ TITAN_IRQ_WAN,
+ TITAN_IRQ_LAN,
+ TITAN_IRQ_MPCIA,
+ TITAN_IRQ_MPCIB,
+ TITAN_IRQ_USB,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ int irq = titan_irq_tab[slot];
+
+ printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+ slot, pin - 1 + 'A', irq);
+
+ return irq;
+}
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index f5d2a2a..e83d0d3 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -1,15 +1,9 @@
/*
- * arch/sh/drivers/pci/ops-dreamcast.c
- *
* PCI operations for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
* Copyright (C) 2002, 2003 Paul Mundt
*
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
@@ -23,34 +17,10 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <mach/pci.h>
-static struct resource gapspci_io_resource = {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct pci_ops gapspci_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &gapspci_pci_ops, &gapspci_io_resource,
- &gapspci_mem_resource, 0, 1 },
- { 0, }
-};
-EXPORT_SYMBOL(board_pci_channels);
-
/*
* The !gapspci_config_access case really shouldn't happen, ever, unless
* someone implicitly messes around with the last devfn value.. otherwise we
@@ -85,10 +55,10 @@
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
- }
+ case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+ case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+ case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+ }
return PCIBIOS_SUCCESSFUL;
}
@@ -99,72 +69,15 @@
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
-static struct pci_ops gapspci_pci_ops = {
+struct pci_ops gapspci_pci_ops = {
.read = gapspci_read,
.write = gapspci_write,
};
-
-/*
- * gapspci init
- */
-
-int __init gapspci_init(void)
-{
- char idbuf[16];
- int i;
-
- /*
- * FIXME: All of this wants documenting to some degree,
- * even some basic register definitions would be nice.
- *
- * I haven't seen anything this ugly since.. maple.
- */
-
- for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
-
- if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
- return -ENODEV;
-
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
- for (i=0; i<1000000; i++)
- ;
-
- if (inl(GAPSPCI_REGS+0x18) != 1)
- return -EINVAL;
-
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
-
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
-
- /* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
- return 0;
-}
-
-/* Haven't done anything here as yet */
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c
deleted file mode 100644
index bff09ec..0000000
--- a/arch/sh/drivers/pci/ops-landisk.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/sh/drivers/pci/ops-landisk.c
- *
- * PCI initialization for the I-O DATA Device, Inc. LANDISK board
- *
- * Copyright (C) 2006 kogiidena
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
- {NULL, NULL, NULL, 0, 0},
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = (64 << 20), /* 64MB */
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- /*
- * slot0: pin1-4 = irq5,6,7,8
- * slot1: pin1-4 = irq6,7,8,5
- * slot2: pin1-4 = irq7,8,5,6
- * slot3: pin1-4 = irq8,5,6,7
- */
- int irq = ((slot + pin - 1) & 0x3) + 5;
-
- if ((slot | (pin - 1)) > 0x3) {
- printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
- slot, pin - 1 + 'A');
- return -1;
- }
- return irq;
-}
diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c
deleted file mode 100644
index 86c0b6f..0000000
--- a/arch/sh/drivers/pci/ops-lboxre2.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-lboxre2.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * PCI initialization for the NTT COMWARE L-BOX RE2
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/lboxre2.h>
-#include "pci-sh4.h"
-
-static char lboxre2_irq_tab[] __initdata = {
- IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return lboxre2_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE ,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
- .window1 = {
- .base = 0x00000000, /* Unused */
- .size = 0x00000000, /* Unused */
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
deleted file mode 100644
index 8555238..0000000
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/highlander.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
- 65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return irq_tab[slot];
-}
-
-static struct resource sh7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .window1 = {
- .base = SH7780_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7780_pcic_init(&sh7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c
deleted file mode 100644
index d6ca74b..0000000
--- a/arch/sh/drivers/pci/ops-rts7751r2d.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-rts7751r2d.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R RTS7751R2D board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-
-static u8 rts7751r2d_irq_tab[] __initdata = {
- IRQ_PCI_INTA,
- IRQ_PCI_INTB,
- IRQ_PCI_INTC,
- IRQ_PCI_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return rts7751r2d_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = 0x4000,
- .end = SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .window1 = {
- .base = 0x00000000, /* Unused */
- .size = 0x00000000, /* Unused */
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- __set_io_port_base(SH7751_PCI_IO_BASE);
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c
deleted file mode 100644
index 4dcc641..0000000
--- a/arch/sh/drivers/pci/ops-sdk7780.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-sdk7780.c
- *
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * PCI initialization for the SDK7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/sdk7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] __initdata = {
- /* INTA */
- { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTC */
- { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTD */
- { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return sdk7780_irq_tab[pin-1][slot];
-}
-
-static struct resource sdk7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sdk7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sdk7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
- .window1 = {
- .base = SH7780_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n");
- return sh7780_pcic_init(&sdk7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
deleted file mode 100644
index 3145c62..0000000
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-se7780.c
- *
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * PCI initialization for the Hitachi UL Solution Engine 7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/*
- * IDSEL = AD16 PCI slot
- * IDSEL = AD17 PCI slot
- * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A)
- * IDSEL = AD19 USB Host Controller (NEC uPD7210100A)
- */
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char se7780_irq_tab[4][16] __initdata = {
- /* INTA */
- { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTC */
- { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTD */
- { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return se7780_irq_tab[pin-1][slot];
-}
-
-static struct resource se7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource se7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops se7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map se7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- printk("SH7780 PCI: Finished initialization of the PCI controller\n");
-
- /*
- * FPGA PCISEL register initialize
- *
- * CPU || SLOT1 | SLOT2 | S-ATA | USB
- * -------------------------------------
- * INTA || INTA | INTD | -- | INTB
- * -------------------------------------
- * INTB || INTB | INTA | -- | INTC
- * -------------------------------------
- * INTC || INTC | INTB | INTA | --
- * -------------------------------------
- * INTD || INTD | INTC | -- | INTA
- * -------------------------------------
- */
- ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
- ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
-
- return sh7780_pcic_init(&se7780_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c
deleted file mode 100644
index e1703ff..0000000
--- a/arch/sh/drivers/pci/ops-sh03.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-sh03.c
- *
- * PCI initialization for the Interface CTP/PCI-SH03 board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include "pci-sh7751.h"
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- __set_io_port_base(SH7751_PCI_IO_BASE);
- return 1;
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH03 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH03 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh4_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c
index 710a3b0..78bebeb 100644
--- a/arch/sh/drivers/pci/ops-sh4.c
+++ b/arch/sh/drivers/pci/ops-sh4.c
@@ -1,22 +1,22 @@
/*
* Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
*
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License v2. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include <asm/addrspace.h>
-#include <asm/io.h>
#include "pci-sh4.h"
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) \
- P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
+ (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
static DEFINE_SPINLOCK(sh4_pci_lock);
@@ -26,6 +26,7 @@
static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
+ struct pci_channel *chan = bus->sysdata;
unsigned long flags;
u32 data;
@@ -34,8 +35,8 @@
* so we must do byte alignment by hand
*/
spin_lock_irqsave(&sh4_pci_lock, flags);
- pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(SH4_PCIPDR);
+ pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(chan, SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
@@ -63,13 +64,14 @@
static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
+ struct pci_channel *chan = bus->sysdata;
unsigned long flags;
int shift;
u32 data;
spin_lock_irqsave(&sh4_pci_lock, flags);
- pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(SH4_PCIPDR);
+ pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(chan, SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
@@ -90,7 +92,7 @@
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
- pci_write_reg(data, SH4_PCIPDR);
+ pci_write_reg(chan, data, SH4_PCIPDR);
return PCIBIOS_SUCCESSFUL;
}
@@ -104,66 +106,31 @@
* Not really related to pci_ops, but it's common and not worth shoving
* somewhere else for now..
*/
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-
-int __init sh4_pci_check_direct(void)
+int __init sh4_pci_check_direct(struct pci_channel *chan)
{
/*
* Check if configuration works.
*/
- if (pci_probe & PCI_PROBE_CONF1) {
- unsigned int tmp = pci_read_reg(SH4_PCIPAR);
+ unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
- pci_write_reg(P1SEG, SH4_PCIPAR);
+ pci_write_reg(chan, P1SEG, SH4_PCIPAR);
- if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
- pci_write_reg(tmp, SH4_PCIPAR);
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
-
- return 0;
- }
-
- pci_write_reg(tmp, SH4_PCIPAR);
+ if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
+ pci_write_reg(chan, tmp, SH4_PCIPAR);
+ printk(KERN_INFO "PCI: Using configuration type 1\n");
+ request_region(chan->reg_base + SH4_PCIPAR, 8,
+ "PCI conf1");
+ return 0;
}
- pr_debug("PCI: pci_check_direct failed\n");
+ pci_write_reg(chan, tmp, SH4_PCIPAR);
+
+ printk(KERN_ERR "PCI: %s failed\n", __func__);
+
return -EINVAL;
}
-/* Handle generic fixups */
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i = 0; i < 4; i++) {
- struct resource *r = &d->resource[i];
-
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- if (!strcmp(str, "off")) {
- pci_probe = 0;
- return NULL;
- }
-
- return str;
-}
-
-int __attribute__((weak)) pci_fixup_pcic(void)
+int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
{
/* Nothing to do. */
return 0;
diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c
index 729e38a..4ce95a0 100644
--- a/arch/sh/drivers/pci/ops-sh5.c
+++ b/arch/sh/drivers/pci/ops-sh5.c
@@ -22,31 +22,6 @@
#include <asm/io.h>
#include "pci-sh5.h"
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- printk("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
deleted file mode 100644
index fb0869f..0000000
--- a/arch/sh/drivers/pci/ops-sh7785lcr.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas R0P7785LC0011RL board
- * Based on arch/sh/drivers/pci/ops-r7780rp.c
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
- 65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return irq_tab[slot];
-}
-
-static struct resource sh7785_io_resource = {
- .name = "SH7785_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
- .name = "SH7785_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7785_pci_map = {
- .window0 = {
-#if defined(CONFIG_32BIT)
- .base = SH7780_32BIT_DDR_BASE_ADDR,
- .size = 0x40000000,
-#else
- .base = SH7780_CS0_BASE_ADDR,
- .size = 0x20000000,
-#endif
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7780_pcic_init(&sh7785_pci_map);
-}
diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c
deleted file mode 100644
index 53dd893..0000000
--- a/arch/sh/drivers/pci/ops-snapgear.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author: David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-#define SNAPGEAR_PCI_IO 0x4000
-#define SNAPGEAR_PCI_MEM 0xfd000000
-
-/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
-#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB
-#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SNAPGEAR_PCI_IO,
- .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */
- .flags = IORESOURCE_IO,
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SNAPGEAR_PCI_MEM,
- .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */
- .flags = IORESOURCE_MEM,
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { 0, }
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SNAPGEAR_LSR0_SIZE,
- },
-
- .window1 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SNAPGEAR_LSR1_SIZE,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-/*
- * Initialize the SnapGear PCI interface
- * Setup hardware to be Central Funtion
- * Copy the BSR regs to the PCI interface
- * Setup PCI windows into local RAM
- */
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (slot) {
- case 8: /* the PCI bridge */ break;
- case 11: irq = 8; break; /* USB */
- case 12: irq = 11; break; /* PCMCIA */
- case 13: irq = 5; break; /* eth0 */
- case 14: irq = 8; break; /* eth1 */
- case 15: irq = 11; break; /* safenet (unused) */
- }
-
- printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
-
-void __init pcibios_fixup(void)
-{
- /* Nothing to fixup .. */
-}
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
deleted file mode 100644
index a8f7801..0000000
--- a/arch/sh/drivers/pci/ops-titan.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * arch/sh/drivers/pci/ops-titan.c
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Modified from ops-snapgear.c written by David McCullough
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Titan boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/titan.h>
-#include "pci-sh4.h"
-
-static char titan_irq_tab[] __initdata = {
- TITAN_IRQ_WAN,
- TITAN_IRQ_LAN,
- TITAN_IRQ_MPCIA,
- TITAN_IRQ_MPCIB,
- TITAN_IRQ_USB,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = titan_irq_tab[slot];
-
- printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */
- },
-
- .window1 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SH7751_MEM_REGION_SIZE*2,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
deleted file mode 100644
index cf48b12..0000000
--- a/arch/sh/drivers/pci/pci-auto.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000, 2001 MontaVista Software Inc.
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * Modified for MIPS by Jun Sun, jsun@mvista.com
- *
- * . Simplify the interface between pci_auto and the rest: a single function.
- * . Assign resources from low address to upper address.
- * . change most int to u32.
- *
- * Further modified to include it as mips generic code, ppopov@mvista.com.
- *
- * 2001-10-26 Bradley D. LaRonde <brad@ltc.com>
- * - Add a top_bus argument to the "early config" functions so that
- * they can set a fake parent bus pointer to convince the underlying
- * pci ops to use type 1 configuration for sub busses.
- * - Set bridge base and limit registers correctly.
- * - Align io and memory base properly before and after bridge setup.
- * - Don't fall through to pci_setup_bars for bridge.
- * - Reformat the debug output to look more like lspci's output.
- *
- * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
- *
- * 2003-08-05 Paul Mundt <lethal@linux-sh.org>
- * - Don't update the BAR values on systems that already have valid addresses
- * and don't want these updated for whatever reason, by way of a new config
- * option check. However, we still read in the old BAR values so that they
- * can still be reported through the debug output.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#define DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
- int top_bus, int busnr, int devfn)
-{
- static struct pci_dev dev;
- static struct pci_bus bus;
-
- dev.bus = &bus;
- dev.sysdata = hose;
- dev.devfn = devfn;
- bus.number = busnr;
- bus.ops = hose->pci_ops;
-
- if(busnr != top_bus)
- /* Fake a parent bus structure. */
- bus.parent = &bus;
- else
- bus.parent = NULL;
-
- return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-static int early_##rw##_config_##size(struct pci_channel *hose, \
- int top_bus, int bus, int devfn, int offset, type value) \
-{ \
- return pci_##rw##_config_##size( \
- fake_pci_dev(hose, top_bus, bus, devfn), \
- offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-static struct resource *io_resource_inuse;
-static struct resource *mem_resource_inuse;
-
-static u32 pciauto_lower_iospc;
-static u32 pciauto_upper_iospc;
-
-static u32 pciauto_lower_memspc;
-static u32 pciauto_upper_memspc;
-
-static void __init
-pciauto_setup_bars(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int bar_limit)
-{
- u32 bar_response, bar_size, bar_value;
- u32 bar, addr_mask, bar_nr = 0;
- u32 * upper_limit;
- u32 * lower_limit;
- int found_mem64 = 0;
-
- for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
- u32 bar_addr;
-
- /* Read the old BAR value */
- early_read_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- &bar_addr);
-
- /* Tickle the BAR and get the response */
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- 0xffffffff);
-
- early_read_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- &bar_response);
-
- /*
- * Write the old BAR value back out, only update the BAR
- * if we implicitly want resources to be updated, which
- * is done by the generic code further down. -- PFM.
- */
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- bar_addr);
-
- /* If BAR is not implemented go to the next BAR */
- if (!bar_response)
- continue;
-
- /*
- * Workaround for a BAR that doesn't use its upper word,
- * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
- * bdl <brad@ltc.com>
- */
- if (!(bar_response & 0xffff0000))
- bar_response |= 0xffff0000;
-
-retry:
- /* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- addr_mask = PCI_BASE_ADDRESS_IO_MASK;
- upper_limit = &pciauto_upper_iospc;
- lower_limit = &pciauto_lower_iospc;
- DBG(" I/O");
- } else {
- if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64)
- found_mem64 = 1;
-
- addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
- upper_limit = &pciauto_upper_memspc;
- lower_limit = &pciauto_lower_memspc;
- DBG(" Mem");
- }
-
-
- /* Calculate requested size */
- bar_size = ~(bar_response & addr_mask) + 1;
-
- /* Allocate a base address */
- bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
-
- if ((bar_value + bar_size) > *upper_limit) {
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- if (io_resource_inuse->child) {
- io_resource_inuse =
- io_resource_inuse->child;
- pciauto_lower_iospc =
- io_resource_inuse->start;
- pciauto_upper_iospc =
- io_resource_inuse->end + 1;
- goto retry;
- }
-
- } else {
- if (mem_resource_inuse->child) {
- mem_resource_inuse =
- mem_resource_inuse->child;
- pciauto_lower_memspc =
- mem_resource_inuse->start;
- pciauto_upper_memspc =
- mem_resource_inuse->end + 1;
- goto retry;
- }
- }
- DBG(" unavailable -- skipping, value %x size %x\n",
- bar_value, bar_size);
- continue;
- }
-
- if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
- DBG(" unavailable -- skipping, value %x size %x\n",
- bar_value, bar_size);
- continue;
- }
-
-#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
- /* Write it out and update our limit */
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- bar, bar_value);
-#endif
-
- *lower_limit = bar_value + bar_size;
-
- /*
- * If we are a 64-bit decoder then increment to the
- * upper 32 bits of the bar and force it to locate
- * in the lower 4GB of memory.
- */
- if (found_mem64) {
- bar += 4;
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- 0x00000000);
- }
-
- DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
-
- bar_nr++;
- }
-
-}
-
-static void __init
-pciauto_prescan_setup_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_PRIMARY_BUS, current_bus);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SECONDARY_BUS, sub_bus + 1);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, 0xff);
-
- /* Align memory and I/O to 1MB and 4KB boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
- & ~(0x100000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
- & ~(0x1000 - 1);
-
- /* Set base (lower limit) of address range behind bridge. */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
-
- /* We don't support prefetchable memory for now, so disable */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_PREF_MEMORY_BASE, 0);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_PREF_MEMORY_LIMIT, 0);
-}
-
-static void __init
-pciauto_postscan_setup_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- u32 temp;
-
- /*
- * [jsun] we always bump up baselines a little, so that if there
- * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
- * spaces.
- */
- pciauto_lower_memspc += 1;
- pciauto_lower_iospc += 1;
-
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, sub_bus);
-
- /* Set upper limit of address range behind bridge. */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
-
- /* Align memory and I/O to 1MB and 4KB boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
- & ~(0x100000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
- & ~(0x1000 - 1);
-
- /* Enable memory and I/O accesses, enable bus master */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &temp);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
- | PCI_COMMAND_MASTER);
-}
-
-static void __init
-pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_PRIMARY_BUS, current_bus);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SECONDARY_BUS, sub_bus + 1);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, 0xff);
-
- /* Align memory and I/O to 4KB and 4 byte boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
- & ~(0x1000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
- & ~(0x4 - 1);
-
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_IO_BASE_0, pciauto_lower_iospc);
-}
-
-static void __init
-pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- u32 temp;
-
- /*
- * [jsun] we always bump up baselines a little, so that if there
- * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
- * spaces.
- */
- pciauto_lower_memspc += 1;
- pciauto_lower_iospc += 1;
-
- /*
- * Configure subordinate bus number. The PCI subsystem
- * bus scan will renumber buses (reserving three additional
- * for this PCI<->CardBus bridge for the case where a CardBus
- * adapter contains a P2P or CB2CB bridge.
- */
-
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, sub_bus);
-
- /*
- * Reserve an additional 4MB for mem space and 16KB for
- * I/O space. This should cover any additional space
- * requirement of unusual CardBus devices with
- * additional bridges that can consume more address space.
- *
- * Although pcmcia-cs currently will reprogram bridge
- * windows, the goal is to add an option to leave them
- * alone and use the bridge window ranges as the regions
- * that are searched for free resources upon hot-insertion
- * of a device. This will allow a PCI<->CardBus bridge
- * configured by this routine to happily live behind a
- * P2P bridge in a system.
- */
- /* Align memory and I/O to 4KB and 4 byte boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
- & ~(0x1000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
- & ~(0x4 - 1);
- /* Set up memory and I/O filter limits, assume 32-bit I/O space */
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
-
- /* Enable memory and I/O accesses, enable bus master */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &temp);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
-}
-
-#define PCIAUTO_IDE_MODE_MASK 0x05
-
-static int __init
-pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
-{
- int sub_bus;
- u32 pci_devfn, pci_class, cmdstat, found_multi=0;
- unsigned short vid, did;
- unsigned char header_type;
- int devfn_start = 0;
- int devfn_stop = 0xff;
-
- sub_bus = current_bus;
-
- if (hose->first_devfn)
- devfn_start = hose->first_devfn;
- if (hose->last_devfn)
- devfn_stop = hose->last_devfn;
-
- for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-
- if (PCI_FUNC(pci_devfn) && !found_multi)
- continue;
-
- early_read_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_VENDOR_ID, &vid);
-
- if (vid == 0xffff) continue;
-
- early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_HEADER_TYPE, &header_type);
-
- if (!PCI_FUNC(pci_devfn))
- found_multi = header_type & 0x80;
-
- early_read_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_DEVICE_ID, &did);
-
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CLASS_REVISION, &pci_class);
-
- DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
- current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
- pci_class >> 16, vid, did);
- if (pci_class & 0xff)
- DBG(" (rev %.2x)", pci_class & 0xff);
- DBG("\n");
-
- if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
- DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
- current_bus, sub_bus + 1);
- pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
- pci_devfn, sub_bus);
- DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
- sub_bus + 1,
- pciauto_lower_iospc, pciauto_lower_memspc);
- sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
- DBG("Back to bus %.2x\n", current_bus);
- pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
- pci_devfn, sub_bus);
- continue;
- } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
- DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n",
- current_bus, sub_bus + 1);
- DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
- /* Place CardBus Socket/ExCA registers */
- pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
-
- pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
- current_bus, pci_devfn, sub_bus);
-
- DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
- sub_bus + 1,
- pciauto_lower_iospc, pciauto_lower_memspc);
- sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
- DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
- pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
- current_bus, pci_devfn, sub_bus);
- continue;
- } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-
- unsigned char prg_iface;
-
- early_read_config_byte(hose, top_bus, current_bus,
- pci_devfn, PCI_CLASS_PROG, &prg_iface);
- if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
- DBG("Skipping legacy mode IDE controller\n");
- continue;
- }
- }
-
- /*
- * Found a peripheral, enable some standard
- * settings
- */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &cmdstat);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_LATENCY_TIMER, 0x80);
-
- /* Allocate PCI I/O and/or memory space */
- pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
- }
- return sub_bus;
-}
-
-int __init
-pciauto_assign_resources(int busno, struct pci_channel *hose)
-{
- /* setup resource limits */
- io_resource_inuse = hose->io_resource;
- mem_resource_inuse = hose->mem_resource;
-
- pciauto_lower_iospc = io_resource_inuse->start;
- pciauto_upper_iospc = io_resource_inuse->end + 1;
- pciauto_lower_memspc = mem_resource_inuse->start;
- pciauto_upper_memspc = mem_resource_inuse->end + 1;
- DBG("Autoconfig PCI channel 0x%p\n", hose);
- DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
- busno, pciauto_lower_iospc, pciauto_upper_iospc,
- pciauto_lower_memspc, pciauto_upper_memspc);
-
- return pciauto_bus_scan(hose, busno, busno);
-}
diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c
new file mode 100644
index 0000000..210f9d4
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-dreamcast.c
@@ -0,0 +1,102 @@
+/*
+ * PCI support for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002 M. R. Brown
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/pci.h>
+
+static struct resource gapspci_io_resource = {
+ .name = "GAPSPCI IO",
+ .start = GAPSPCI_BBA_CONFIG,
+ .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource gapspci_mem_resource = {
+ .name = "GAPSPCI mem",
+ .start = GAPSPCI_DMA_BASE,
+ .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct pci_channel dreamcast_pci_controller = {
+ .pci_ops = &gapspci_pci_ops,
+ .io_resource = &gapspci_io_resource,
+ .io_offset = 0x00000000,
+ .mem_resource = &gapspci_mem_resource,
+ .mem_offset = 0x00000000,
+};
+
+/*
+ * gapspci init
+ */
+
+static int __init gapspci_init(void)
+{
+ char idbuf[16];
+ int i;
+
+ /*
+ * FIXME: All of this wants documenting to some degree,
+ * even some basic register definitions would be nice.
+ *
+ * I haven't seen anything this ugly since.. maple.
+ */
+
+ for (i=0; i<16; i++)
+ idbuf[i] = inb(GAPSPCI_REGS+i);
+
+ if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
+ return -ENODEV;
+
+ outl(0x5a14a501, GAPSPCI_REGS+0x18);
+
+ for (i=0; i<1000000; i++)
+ cpu_relax();
+
+ if (inl(GAPSPCI_REGS+0x18) != 1)
+ return -EINVAL;
+
+ outl(0x01000000, GAPSPCI_REGS+0x20);
+ outl(0x01000000, GAPSPCI_REGS+0x24);
+
+ outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+ outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+
+ outl(1, GAPSPCI_REGS+0x14);
+ outl(1, GAPSPCI_REGS+0x34);
+
+ /* Setting Broadband Adapter */
+ outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+ outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+ outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+ outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+ outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+ outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+ outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+
+ register_pci_controller(&dreamcast_pci_controller);
+
+ return 0;
+}
+arch_initcall(gapspci_init);
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index a83dcf7..3d5296c 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -149,13 +149,10 @@
#define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
#define SH4_PCIPDR 0x220 /* Port IO Data Register */
-/* Flags */
-#define SH4_PCIC_NO_RESET 0x0001
-
/* arch/sh/kernel/drivers/pci/ops-sh4.c */
extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(void);
-int pci_fixup_pcic(void);
+int sh4_pci_check_direct(struct pci_channel *chan);
+int pci_fixup_pcic(struct pci_channel *chan);
struct sh4_pci_address_space {
unsigned long base;
@@ -165,16 +162,18 @@
struct sh4_pci_address_map {
struct sh4_pci_address_space window0;
struct sh4_pci_address_space window1;
- unsigned long flags;
};
-static inline void pci_write_reg(unsigned long val, unsigned long reg)
+static inline void pci_write_reg(struct pci_channel *chan,
+ unsigned long val, unsigned long reg)
{
- ctrl_outl(val, PCI_REG(reg));
+ ctrl_outl(val, chan->reg_base + reg);
}
-static inline unsigned long pci_read_reg(unsigned long reg)
+static inline unsigned long pci_read_reg(struct pci_channel *chan,
+ unsigned long reg)
{
- return ctrl_inl(PCI_REG(reg));
+ return ctrl_inl(chan->reg_base + reg);
}
+
#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 7a97438..cf43185 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -89,8 +89,21 @@
return IRQ_NONE;
}
-int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
+static struct resource sh5_io_resource = { /* place holder */ };
+static struct resource sh5_mem_resource = { /* place holder */ };
+
+static struct pci_channel sh5pci_controller = {
+ .pci_ops = &sh5_pci_ops,
+ .mem_resource = &sh5_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh5_io_resource,
+ .io_offset = 0x00000000,
+};
+
+static int __init sh5pci_init(void)
{
+ unsigned long memStart = __pa(memory_start);
+ unsigned long memSize = __pa(memory_end) - memStart;
u32 lsr0;
u32 uval;
@@ -197,32 +210,14 @@
SH5PCI_WRITE(AINTM, ~0);
SH5PCI_WRITE(PINTM, ~0);
+ sh5_io_resource.start = PCI_IO_AREA;
+ sh5_io_resource.end = PCI_IO_AREA + 0x10000;
+
+ sh5_mem_resource.start = memStart;
+ sh5_mem_resource.end = memStart + memSize;
+
+ register_pci_controller(&sh5pci_controller);
+
return 0;
}
-
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
- int i;
-
- if (dev) {
- for (i= 0; i < 3; i++) {
- bus->resource[i] =
- &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->name = bus->name;
- }
- bus->resource[0]->flags |= IORESOURCE_IO;
- bus->resource[1]->flags |= IORESOURCE_MEM;
-
- /* For now, propagate host limits to the bus;
- * we'll adjust them later. */
- bus->resource[0]->end = 64*1024 - 1 ;
- bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
- bus->resource[0]->start = PCIBIOS_MIN_IO;
- bus->resource[1]->start = PCIBIOS_MIN_MEM;
-
- /* Turn off downstream PF memory address range by default */
- bus->resource[2]->start = 1024*1024;
- bus->resource[2]->end = bus->resource[2]->start - 1;
- }
-}
+arch_initcall(sh5pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h
index 7cff3fc..f277628 100644
--- a/arch/sh/drivers/pci/pci-sh5.h
+++ b/arch/sh/drivers/pci/pci-sh5.h
@@ -107,7 +107,4 @@
extern struct pci_ops sh5_pci_ops;
-/* arch/sh/drivers/pci/pci-sh5.c */
-int sh5pci_init(unsigned long memStart, unsigned long memSize);
-
#endif /* __PCI_SH5_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 3065eb184..c4fa0bb1 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -1,114 +1,110 @@
/*
- * Low-Level PCI Support for the SH7751
+ * Low-Level PCI Support for the SH7751
*
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2003 - 2009 Paul Mundt
+ * Copyright (C) 2001 Dustin McIntire
*
- * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- * With cleanup by Paul van Gool <pvangool@mimotech.com>
+ * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
*
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#undef DEBUG
-
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/io.h>
#include "pci-sh4.h"
#include <asm/addrspace.h>
-#include <asm/io.h>
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
+static int __init __area_sdram_check(struct pci_channel *chan,
+ unsigned int area)
+{
+ unsigned long word;
+
+ word = __raw_readl(SH7751_BCR1);
+ /* check BCR for SDRAM in area */
+ if (((word >> area) & 1) == 0) {
+ printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
+ area, word);
+ return 0;
+ }
+ pci_write_reg(chan, word, SH4_PCIBCR1);
+
+ word = __raw_readw(SH7751_BCR2);
+ /* check BCR2 for 32bit SDRAM interface*/
+ if (((word >> (area << 1)) & 0x3) != 0x3) {
+ printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
+ area, word);
+ return 0;
+ }
+ pci_write_reg(chan, word, SH4_PCIBCR2);
+
+ return 1;
+}
+
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7785_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_channel sh7751_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .mem_resource = &sh7751_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh7751_io_resource,
+ .io_offset = 0x00000000,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+};
+
static int __init sh7751_pci_init(void)
{
+ struct pci_channel *chan = &sh7751_pci_controller;
unsigned int id;
+ u32 word, reg;
int ret;
- pr_debug("PCI: Starting intialization.\n");
+ printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+ chan->reg_base = 0xfe200000;
/* check for SH7751/SH7751R hardware */
- id = pci_read_reg(SH7751_PCICONF0);
+ id = pci_read_reg(chan, SH7751_PCICONF0);
if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
return -ENODEV;
}
- if ((ret = sh4_pci_check_direct()) != 0)
+ if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
- return pcibios_init_platform();
-}
-subsys_initcall(sh7751_pci_init);
-
-static int __init __area_sdram_check(unsigned int area)
-{
- u32 word;
-
- word = ctrl_inl(SH7751_BCR1);
- /* check BCR for SDRAM in area */
- if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
- area, word);
- return 0;
- }
- pci_write_reg(word, SH4_PCIBCR1);
-
- word = (u16)ctrl_inw(SH7751_BCR2);
- /* check BCR2 for 32bit SDRAM interface*/
- if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
- area, word);
- return 0;
- }
- pci_write_reg(word, SH4_PCIBCR2);
-
- return 1;
-}
-
-int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
-{
- u32 reg;
- u32 word;
-
/* Set the BCR's to enable PCI access */
reg = ctrl_inl(SH7751_BCR1);
reg |= 0x80000;
ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
- pci_write_reg(0, SH4_PCICLKR);
+ pci_write_reg(chan, 0, SH4_PCICLKR);
/* Clear Powerdown IRQ's (not done in reset) */
word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(word, SH4_PCIPINT);
-
- /*
- * This code is unused for some boards as it is done in the
- * bootloader and doing it here means the MAC addresses loaded
- * by the bootloader get lost.
- */
- if (!(map->flags & SH4_PCIC_NO_RESET)) {
- /* toggle PCI reset pin */
- word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
- pci_write_reg(word, SH4_PCICR);
- /* Wait for a long time... not 1 sec. but long enough */
- mdelay(100);
- word = SH4_PCICR_PREFIX;
- pci_write_reg(word, SH4_PCICR);
- }
+ pci_write_reg(chan, word, SH4_PCIPINT);
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
@@ -116,89 +112,77 @@
*/
word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(word, SH7751_PCICONF1);
+ pci_write_reg(chan, word, SH7751_PCICONF1);
/* define this host as the host bridge */
word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(word, SH7751_PCICONF2);
+ pci_write_reg(chan, word, SH7751_PCICONF2);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
- * Window0 = map->window0.size @ non-cached area base = SDRAM
- * Window1 = map->window1.size @ cached area base = SDRAM
*/
- word = map->window0.size - 1;
- pci_write_reg(word, SH4_PCILSR0);
- word = map->window1.size - 1;
- pci_write_reg(word, SH4_PCILSR1);
+ word = sh7751_pci_map.window0.size - 1;
+ pci_write_reg(chan, word, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(map->window0.base);
- pci_write_reg(word, SH4_PCILAR0);
- pci_write_reg(word, SH7751_PCICONF5);
- /* Set the values on window 1 PCI config registers */
- word = PHYSADDR(map->window1.base);
- pci_write_reg(word, SH4_PCILAR1);
- pci_write_reg(word, SH7751_PCICONF6);
+ word = P2SEGADDR(sh7751_pci_map.window0.base);
+ pci_write_reg(chan, word, SH4_PCILAR0);
+ pci_write_reg(chan, word, SH7751_PCICONF5);
/* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+ word = chan->mem_resource->start & SH4_PCIMBR_MASK;
pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(word , SH4_PCIMBR);
-
- /* Map IO space into PCI IO window
- * The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
- * PCI IO window base address
- */
- pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
- PCIBIOS_MIN_IO, (64 << 10),
- SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ pci_write_reg(chan, word , SH4_PCIMBR);
/* Make sure the MSB's of IO window are set to access PCI space
* correctly */
- word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+ word = chan->io_resource->start & SH4_PCIIOBR_MASK;
pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(word, SH4_PCIIOBR);
+ pci_write_reg(chan, word, SH4_PCIIOBR);
/* Set PCI WCRx, BCRx's, copy from BSC locations */
/* check BCR for SDRAM in specified area */
- switch (map->window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
+ switch (sh7751_pci_map.window0.base) {
+ case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+ case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+ case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+ case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+ case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+ case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+ case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
}
if (!word)
- return 0;
+ return -1;
/* configure the wait control registers */
word = ctrl_inl(SH7751_WCR1);
- pci_write_reg(word, SH4_PCIWCR1);
+ pci_write_reg(chan, word, SH4_PCIWCR1);
word = ctrl_inl(SH7751_WCR2);
- pci_write_reg(word, SH4_PCIWCR2);
+ pci_write_reg(chan, word, SH4_PCIWCR2);
word = ctrl_inl(SH7751_WCR3);
- pci_write_reg(word, SH4_PCIWCR3);
+ pci_write_reg(chan, word, SH4_PCIWCR3);
word = ctrl_inl(SH7751_MCR);
- pci_write_reg(word, SH4_PCIMCR);
+ pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
* DMA interrupts...
*/
- pci_fixup_pcic();
+ pci_fixup_pcic(chan);
/* SH7751 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(word, SH4_PCICR);
+ pci_write_reg(chan, word, SH4_PCICR);
- return 1;
+ __set_io_port_base(SH7751_PCI_IO_BASE);
+
+ register_pci_controller(chan);
+
+ return 0;
}
+arch_initcall(sh7751_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 68e3cb5..4983a4d 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -26,7 +26,6 @@
#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
-#define PCI_REG(n) (SH7751_PCIREG_BASE+ n)
#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
#define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
@@ -58,7 +57,7 @@
#define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
#define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
#define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
-#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
+#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
#define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
#define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
#define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
@@ -73,12 +72,12 @@
#define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
#define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
#define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
+ #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
#define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
#define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
#define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
+ #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
/* PCICONF7 - PCICONF10 are undefined */
#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
#define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
@@ -127,9 +126,4 @@
#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7751.c */
-int sh7751_pcic_init(struct sh4_pci_address_map *map);
-
#endif /* _PCI_SH7751_H_ */
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index bae6a2c..ae13ff9 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -1,19 +1,12 @@
/*
- * Low-Level PCI Support for the SH7780
+ * Low-Level PCI Support for the SH7780
*
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2005 - 2009 Paul Mundt
*
- * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- * With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#undef DEBUG
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -22,135 +15,137 @@
#include <linux/delay.h>
#include "pci-sh4.h"
-#define INTC_BASE 0xffd00000
-#define INTC_ICR0 (INTC_BASE+0x0)
-#define INTC_ICR1 (INTC_BASE+0x1c)
-#define INTC_INTPRI (INTC_BASE+0x10)
-#define INTC_INTREQ (INTC_BASE+0x24)
-#define INTC_INTMSK0 (INTC_BASE+0x44)
-#define INTC_INTMSK1 (INTC_BASE+0x48)
-#define INTC_INTMSK2 (INTC_BASE+0x40080)
-#define INTC_INTMSKCLR0 (INTC_BASE+0x64)
-#define INTC_INTMSKCLR1 (INTC_BASE+0x68)
-#define INTC_INTMSKCLR2 (INTC_BASE+0x40084)
-#define INTC_INT2MSKR (INTC_BASE+0x40038)
-#define INTC_INT2MSKCR (INTC_BASE+0x4003c)
+extern u8 pci_cache_line_size;
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
+static struct resource sh7785_io_resource = {
+ .name = "SH7785_IO",
+ .start = SH7780_PCI_IO_BASE,
+ .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+ .name = "SH7785_mem",
+ .start = SH7780_PCI_MEMORY_BASE,
+ .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_channel sh7780_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .mem_resource = &sh7785_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh7785_io_resource,
+ .io_offset = 0x00000000,
+};
+
+static struct sh4_pci_address_map sh7780_pci_map = {
+ .window0 = {
+#if defined(CONFIG_32BIT)
+ .base = SH7780_32BIT_DDR_BASE_ADDR,
+ .size = 0x40000000,
+#else
+ .base = SH7780_CS0_BASE_ADDR,
+ .size = 0x20000000,
+#endif
+ },
+};
+
static int __init sh7780_pci_init(void)
{
+ struct pci_channel *chan = &sh7780_pci_controller;
unsigned int id;
- int ret, match = 0;
+ const char *type = NULL;
+ int ret;
+ u32 word;
- pr_debug("PCI: Starting intialization.\n");
+ printk(KERN_NOTICE "PCI: Starting intialization.\n");
- ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
+ chan->reg_base = 0xfe040000;
- /* check for SH7780/SH7780R hardware */
- id = pci_read_reg(SH7780_PCIVID);
- if ((id & 0xffff) == SH7780_VENDOR_ID) {
- switch ((id >> 16) & 0xffff) {
- case SH7763_DEVICE_ID:
- case SH7780_DEVICE_ID:
- case SH7781_DEVICE_ID:
- case SH7785_DEVICE_ID:
- match = 1;
- break;
- }
- }
+ /* Enable CPU access to the PCIC registers. */
+ __raw_writel(PCIECR_ENBL, PCIECR);
- if (unlikely(!match)) {
- printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
+ id = __raw_readw(chan->reg_base + SH7780_PCIVID);
+ if (id != SH7780_VENDOR_ID) {
+ printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
- /* Setup the INTC */
- if (mach_is_7780se()) {
- /* ICR0: IRL=use separately */
- ctrl_outl(0x00C00020, INTC_ICR0);
- /* ICR1: detect low level(for 2ndcut) */
- ctrl_outl(0xAAAA0000, INTC_ICR1);
- /* INTPRI: priority=3(all) */
- ctrl_outl(0x33333333, INTC_INTPRI);
+ id = __raw_readw(chan->reg_base + SH7780_PCIDID);
+ type = (id == SH7763_DEVICE_ID) ? "SH7763" :
+ (id == SH7780_DEVICE_ID) ? "SH7780" :
+ (id == SH7781_DEVICE_ID) ? "SH7781" :
+ (id == SH7785_DEVICE_ID) ? "SH7785" :
+ NULL;
+ if (unlikely(!type)) {
+ printk(KERN_ERR "PCI: Found an unsupported Renesas host "
+ "controller, device id 0x%04x.\n", id);
+ return -EINVAL;
}
- if ((ret = sh4_pci_check_direct()) != 0)
+ printk(KERN_NOTICE "PCI: Found a Renesas %s host "
+ "controller, revision %d.\n", type,
+ __raw_readb(chan->reg_base + SH7780_PCIRID));
+
+ if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;
- return pcibios_init_platform();
-}
-core_initcall(sh7780_pci_init);
+ /*
+ * Set the class and sub-class codes.
+ */
+ __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
+ chan->reg_base + SH7780_PCIBCC);
+ __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
+ chan->reg_base + SH7780_PCISUB);
-int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
-{
- u32 word;
+ pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4;
/*
- * This code is unused for some boards as it is done in the
- * bootloader and doing it here means the MAC addresses loaded
- * by the bootloader get lost.
- */
- if (!(map->flags & SH4_PCIC_NO_RESET)) {
- /* toggle PCI reset pin */
- word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
- pci_write_reg(word, SH4_PCICR);
- /* Wait for a long time... not 1 sec. but long enough */
- mdelay(100);
- word = SH4_PCICR_PREFIX;
- pci_write_reg(word, SH4_PCICR);
- }
-
- /* set the command/status bits to:
- * Wait Cycle Control + Parity Enable + Bus Master +
- * Mem space enable
- */
- pci_write_reg(0x00000046, SH7780_PCICMD);
-
- /* define this host as the host bridge */
- word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(word, SH7780_PCIRID);
-
- /* Set IO and Mem windows to local address
+ * Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
- pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0);
- pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1);
+ pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
- pci_write_reg(map->window0.base, SH4_PCILAR0);
- pci_write_reg(map->window0.base, SH7780_PCIMBAR0);
- /* Set the values on window 1 PCI config registers */
- pci_write_reg(map->window1.base, SH4_PCILAR1);
- pci_write_reg(map->window1.base, SH7780_PCIMBAR1);
+ pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
+ pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
- /* Map IO space into PCI IO window
- * The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
- * PCI IO window base address
- */
- pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
- PCIBIOS_MIN_IO, (64 << 10),
- SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
- /* NOTE: I'm ignoring the PCI error IRQs for now..
- * TODO: add support for the internal error interrupts and
- * DMA interrupts...
- */
+ /* Set up standard PCI config registers */
+ __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
+ __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
+ __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
+ __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+
+ __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
- pci_fixup_pcic();
+ pci_fixup_pcic(chan);
+
+ pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
+ pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+ pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
+ pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+ /* Set IOBR for windows containing area specified in pci.h */
+ pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
+ SH7780_PCIIOBR);
+ pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
+ SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
- pci_write_reg(word, SH4_PCICR);
+ pci_write_reg(chan, word, SH4_PCICR);
- return 1;
+ __set_io_port_base(SH7780_PCI_IO_BASE);
+
+ register_pci_controller(chan);
+
+ return 0;
}
+arch_initcall(sh7780_pci_init);
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index 93adc71..4a52478 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -20,9 +20,8 @@
#define SH7785_DEVICE_ID 0x0007
/* SH7780 Control Registers */
-#define SH7780_PCI_VCR0 0xFE000000
-#define SH7780_PCI_VCR1 0xFE000004
-#define SH7780_PCI_VCR2 0xFE000008
+#define PCIECR 0xFE000008
+#define PCIECR_ENBL 0x01
/* SH7780 Specific Values */
#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
@@ -35,7 +34,6 @@
#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
-#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
/* SH7780 PCI Config Registers */
#define SH7780_PCIVID 0x000 /* Vendor ID */
@@ -67,11 +65,6 @@
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
-#define SH7780_PCICR 0x100 /* PCI Control Register */
-#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */
-#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
-#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
@@ -106,9 +99,4 @@
#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7780.c */
-int sh7780_pcic_init(struct sh4_pci_address_map *map);
-
#endif /* _PCI_SH7780_H_ */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 0d6ac7a1..54d77cb 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -1,67 +1,156 @@
/*
- * arch/sh/drivers/pci/pci.c
+ * New-style PCI core.
*
- * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org>
- * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (c) 2004 - 2009 Paul Mundt
+ * Copyright (c) 2002 M. R. Brown
*
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * These routines require the following board-specific routines:
- * void pcibios_fixup_irqs();
- *
- * See include/asm-sh/pci.h for more information.
+ * Modelled after arch/mips/pci/pci.c:
+ * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/types.h>
#include <linux/dma-debug.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+
+unsigned long PCIBIOS_MIN_IO = 0x0000;
+unsigned long PCIBIOS_MIN_MEM = 0;
+
+/*
+ * The PCI controller list.
+ */
+static struct pci_channel *hose_head, **hose_tail = &hose_head;
+
+static int pci_initialized;
+
+static void __devinit pcibios_scanbus(struct pci_channel *hose)
+{
+ static int next_busno;
+ struct pci_bus *bus;
+
+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224)
+ next_busno = 0;
+
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ pci_enable_bridges(bus);
+ }
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
+
+void __devinit register_pci_controller(struct pci_channel *hose)
+{
+ if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+ goto out;
+ if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
+ }
+
+ *hose_tail = hose;
+ hose_tail = &hose->next;
+
+ /*
+ * Do not panic here but later - this might hapen before console init.
+ */
+ if (!hose->io_map_base) {
+ printk(KERN_WARNING
+ "registering PCI controller with io_map_base unset\n");
+ }
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
+}
static int __init pcibios_init(void)
{
- struct pci_channel *p;
- struct pci_bus *bus;
- int busno;
+ struct pci_channel *hose;
-#ifdef CONFIG_PCI_AUTO
- /* assign resources */
- busno = 0;
- for (p = board_pci_channels; p->pci_ops != NULL; p++)
- busno = pciauto_assign_resources(busno, p) + 1;
-#endif
-
- /* scan the buses */
- busno = 0;
- for (p = board_pci_channels; p->pci_ops != NULL; p++) {
- bus = pci_scan_bus(busno, p->pci_ops, p);
- busno = bus->subordinate + 1;
- }
+ /* Scan all of the recorded PCI controllers. */
+ for (hose = hose_head; hose; hose = hose->next)
+ pcibios_scanbus(hose);
pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
dma_debug_add_bus(&pci_bus_type);
+ pci_initialized = 1;
+
return 0;
}
subsys_initcall(pcibios_init);
+static void pcibios_fixup_device_resources(struct pci_dev *dev,
+ struct pci_bus *bus)
+{
+ /* Update device resources. */
+ struct pci_channel *hose = bus->sysdata;
+ unsigned long offset = 0;
+ int i;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ if (!dev->resource[i].start)
+ continue;
+ if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
+ continue;
+ if (dev->resource[i].flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (dev->resource[i].flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ dev->resource[i].start += offset;
+ dev->resource[i].end += offset;
+ }
+}
+
/*
* Called after each bus is probed, but before its children
* are examined.
*/
-void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
- pci_read_bridge_bases(bus);
-}
+ struct pci_dev *dev = bus->self;
+ struct list_head *ln;
+ struct pci_channel *chan = bus->sysdata;
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
- __attribute__ ((weak));
+ if (!dev) {
+ bus->resource[0] = chan->io_resource;
+ bus->resource[1] = chan->mem_resource;
+ }
+
+ for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+ dev = pci_dev_b(ln);
+
+ if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ pcibios_fixup_device_resources(dev, bus);
+ }
+}
/*
* We need to avoid collisions with `mirrored' VGA ports
@@ -72,14 +161,58 @@
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
{
- if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
+ struct pci_dev *dev = data;
+ struct pci_channel *chan = dev->sysdata;
+ resource_size_t start = res->start;
+ if (res->flags & IORESOURCE_IO) {
+ if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
+ start = PCIBIOS_MIN_IO + chan->io_resource->start;
+
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400.
+ */
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
+ } else if (res->flags & IORESOURCE_MEM) {
+ if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
+ start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
}
+
+ res->start = start;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ struct pci_channel *hose = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (res->flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ region->start = res->start - offset;
+ region->end = res->end - offset;
+}
+
+void __devinit
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ struct pci_channel *hose = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (res->flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ res->start = region->start + offset;
+ res->end = region->end + offset;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
@@ -90,13 +223,21 @@
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
- if (!(mask & (1 << idx)))
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
continue;
+
r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because "
- "of resource collisions\n", pci_name(dev));
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
@@ -104,10 +245,8 @@
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
- printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n",
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
@@ -140,6 +279,43 @@
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ /*
+ * I/O space can be accessed via normal processor loads and stores on
+ * this platform but for now we elect not to do this and portable
+ * drivers should not do this anyway.
+ */
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ /*
+ * Ignore write-combine; for now only return uncached mappings.
+ */
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+}
+
+static void __iomem *ioport_map_pci(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
+{
+ struct pci_channel *chan = dev->sysdata;
+
+ if (!chan->io_map_base)
+ chan->io_map_base = generic_io_base;
+
+ return (void __iomem *)(chan->io_map_base + port);
+}
+
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
resource_size_t start = pci_resource_start(dev, bar);
@@ -151,20 +327,24 @@
if (maxlen && len > maxlen)
len = maxlen;
+ if (flags & IORESOURCE_IO)
+ return ioport_map_pci(dev, start, len);
+
/*
* Presently the IORESOURCE_MEM case is a bit special, most
* SH7751 style PCI controllers have PCI memory at a fixed
- * location in the address space where no remapping is desired
- * (typically at 0xfd000000, but is_pci_memaddr() will know
- * best). With the IORESOURCE_MEM case more care has to be taken
+ * location in the address space where no remapping is desired.
+ * With the IORESOURCE_MEM case more care has to be taken
* to inhibit page table mapping for legacy cores, but this is
* punted off to __ioremap().
* -- PFM.
*/
- if (flags & IORESOURCE_IO)
- return ioport_map(start, len);
- if (flags & IORESOURCE_MEM)
- return ioremap(start, len);
+ if (flags & IORESOURCE_MEM) {
+ if (flags & IORESOURCE_CACHEABLE)
+ return ioremap(start, len);
+
+ return ioremap_nocache(start, len);
+ }
return NULL;
}
@@ -175,3 +355,10 @@
iounmap(addr);
}
EXPORT_SYMBOL(pci_iounmap);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+#endif
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
index efd511d..8688a88 100644
--- a/arch/sh/include/asm/device.h
+++ b/arch/sh/include/asm/device.h
@@ -10,3 +10,5 @@
int platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize);
+void plat_early_device_setup(void);
+
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index df1d383..5b2e0fc 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -17,54 +17,29 @@
* external) PCI controllers.
*/
struct pci_channel {
- struct pci_ops *pci_ops;
- struct resource *io_resource;
- struct resource *mem_resource;
- int first_devfn;
- int last_devfn;
+ struct pci_channel *next;
+
+ struct pci_ops *pci_ops;
+ struct resource *io_resource;
+ struct resource *mem_resource;
+
+ unsigned long io_offset;
+ unsigned long mem_offset;
+
+ unsigned long reg_base;
+
+ unsigned long io_map_base;
};
-/*
- * Each board initializes this array and terminates it with a NULL entry.
- */
-extern struct pci_channel board_pci_channels[];
+extern void register_pci_controller(struct pci_channel *hose);
-#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start
-#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start
-
-/*
- * I/O routine helpers
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define PCI_IO_AREA 0xFE400000
-#define PCI_IO_SIZE 0x00400000
-#elif defined(CONFIG_CPU_SH5)
-extern unsigned long PCI_IO_AREA;
-#define PCI_IO_SIZE 0x00010000
-#else
-#define PCI_IO_AREA 0xFE240000
-#define PCI_IO_SIZE 0x00040000
-#endif
-
-#define PCI_MEM_SIZE 0x01000000
-
-#define SH4_PCIIOBR_MASK 0xFFFC0000
-#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
-
-#if defined(CONFIG_PCI)
-#define is_pci_ioaddr(port) \
- (((port) >= PCIBIOS_MIN_IO) && \
- ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
-#define is_pci_memaddr(port) \
- (((port) >= PCIBIOS_MIN_MEM) && \
- ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
-#else
-#define is_pci_ioaddr(port) (0)
-#define is_pci_memaddr(port) (0)
-#endif
+extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
struct pci_dev;
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
extern void pcibios_set_master(struct pci_dev *dev);
static inline void pcibios_penalize_isa_irq(int irq, int active)
@@ -123,22 +98,51 @@
}
#endif
-/* Board-specific fixup routines. */
-void pcibios_fixup(void);
-int pcibios_init_platform(void);
-int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
+#ifdef CONFIG_SUPERH32
+/*
+ * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
+ * at the end of the address space in a special non-translatable area.
+ */
+#define PCI_MEM_FIXED_START 0xfd000000
+#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000)
-#ifdef CONFIG_PCI_AUTO
-int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#define is_pci_memory_fixed_range(s, e) \
+ ((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
+#else
+#define is_pci_memory_fixed_range(s, e) (0)
#endif
-#endif /* __KERNEL__ */
+/* Board-specific fixup routines. */
+int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
-/* generic pci stuff */
-#include <asm-generic/pci.h>
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+/* Chances are this interrupt is wired PC-style ... */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
/* generic DMA-mapping stuff */
#include <asm-generic/pci-dma-compat.h>
+#endif /* __KERNEL__ */
#endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 1fd58b4..005c962 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -32,7 +32,7 @@
/* SH-4A types */
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
- CPU_SH7723, CPU_SHX3,
+ CPU_SH7723, CPU_SH7724, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366,
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
index 749d1c4..ccf1d99 100644
--- a/arch/sh/include/cpu-sh4/cpu/freq.h
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -25,6 +25,24 @@
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define FRQCRA 0xa4150000
+#define FRQCRB 0xa4150004
+#define VCLKCR 0xa4150048
+
+#define FCLKACR 0xa4150008
+#define FCLKBCR 0xa415000c
+#define FRQCR FRQCRA
+#define SCLKACR FCLKACR
+#define SCLKBCR FCLKBCR
+#define FCLKACR 0xa4150008
+#define FCLKBCR 0xa415000c
+#define IrDACLKCR 0xa4150018
+
+#define MSTPCR0 0xa4150030
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
new file mode 100644
index 0000000..34605c9e3
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -0,0 +1,255 @@
+#ifndef __ASM_SH7724_H__
+#define __ASM_SH7724_H__
+
+enum {
+ /* PTA */
+ GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+ GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+ /* PTB */
+ GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+ GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+ /* PTC */
+ GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+ GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+ /* PTD */
+ GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+ GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+ /* PTE */
+ GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+ GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+ /* PTF */
+ GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+ GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+ /* PTG */
+ GPIO_PTG5, GPIO_PTG4,
+ GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+ /* PTH */
+ GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+ GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+ /* PTJ */
+ GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
+ GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+ /* PTK */
+ GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+ GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+ /* PTL */
+ GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+ GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+ /* PTM */
+ GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+ GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+ /* PTN */
+ GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+ GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+ /* PTQ */
+ GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+ GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+ /* PTR */
+ GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+ GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+ /* PTS */
+ GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+ GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+ /* PTT */
+ GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
+ GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+ /* PTU */
+ GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+ GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+ /* PTV */
+ GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+ GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+ /* PTW */
+ GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+ GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+ /* PTX */
+ GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+ GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+ /* PTY */
+ GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+ GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+ /* PTZ */
+ GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+ GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+ /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
+ GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+ GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+ GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+ GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+ GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+ GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
+ GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
+ GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
+ GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+ GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
+ GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
+ GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+ GPIO_FN_IOIS16, GPIO_FN_WAIT,
+ GPIO_FN_BS,
+
+ /* KEYSC (PTA/PTB)*/
+ GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
+ GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
+
+ /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
+ GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+ GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
+ GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
+ GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
+ GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR,
+ GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
+ GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+ GPIO_FN_IDEINT, GPIO_FN_IDEIORDY,
+
+ /* TPU (PTB/PTR/PTS) */
+ GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+ GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
+
+ /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
+ GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+ GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+ GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+ GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+ GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+ GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+ GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN,
+ GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
+ GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK,
+
+ /* SCIF0 (PTF/PTM) */
+ GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
+
+ /* SCIF1 (PTL) */
+ GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
+
+ /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
+ GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
+ GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
+
+ /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
+ GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
+ GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
+ GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
+ GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
+
+ /* SCIF4 (PTE) */
+ GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
+
+ /* SCIF5 (PTS) */
+ GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
+
+ /* FSI (PTE/PTU/PTV) */
+ GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD,
+ GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK,
+ GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
+ GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK,
+ GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO,
+ GPIO_FN_FSIIASD,
+
+ /* AUD (PTG) */
+ GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
+ GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+
+ /* VIO (PTS) (common?) */
+ GPIO_FN_VIO_CKO,
+
+ /* VIO0 (PTH/PTK) */
+ GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
+ GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8,
+ GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4,
+ GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0,
+ GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK,
+ GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
+
+ /* VIO1 (PTK/PTS) */
+ GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
+ GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
+ GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
+
+ /* Eth (PTL/PTN/PTX) */
+ GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1,
+ GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1,
+ GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
+ GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV,
+ GPIO_FN_LNKSTA, GPIO_FN_MDIO,
+ GPIO_FN_MDC,
+
+ /* System (PTJ) */
+ GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
+
+ /* VOU (PTL/PTM/PTN*/
+ GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+ GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+ GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+ GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+ GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+
+ /* MSIOF0 (PTL/PTM) */
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_RSYNC,
+
+ /* MSIOF1 (PTV) */
+ GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD,
+ GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
+ GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
+ GPIO_FN_MSIOF1_RSYNC,
+
+ /* DMAC (PTU/PTX) */
+ GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
+ GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
+
+ /* SDHI0 (PTY) */
+ GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
+ GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0,
+
+ /* SDHI1 (PTW) */
+ GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+ GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0,
+
+ /* MMC (PTW/PTX)*/
+ GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
+ GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
+ GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
+
+ /* IrDA (PTX) */
+ GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
+
+ /* TSIF (PTX) */
+ GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
+ GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
+
+ /* IRQ (PTZ) */
+ GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
+ GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
+ GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
+};
+
+#endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
index 75fc900..0314d97 100644
--- a/arch/sh/include/mach-dreamcast/mach/pci.h
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -21,5 +21,7 @@
#define GAPSPCI_IRQ HW_EVENT_EXTERNAL
+extern struct pci_ops gapspci_pci_ops;
+
#endif /* __ASM_SH_DREAMCAST_PCI_H */
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 91e3677..973ff83 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -156,6 +156,12 @@
break;
}
break;
+ case 0x300b:
+ boot_cpu_data.type = CPU_SH7724;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_FPU;
+ break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */
boot_cpu_data.type = CPU_SHX3;
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 1a92361..afd6fba4 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
@@ -26,12 +27,14 @@
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
# Pinmux setup
pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 0e174af..1ccdfc5 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -130,6 +130,12 @@
* is quite simple..
*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define STCPLL(frqcr) ((((frqcr >> 24) & 0x3f) + 1) * 2)
+#else
+#define STCPLL(frqcr) (((frqcr >> 24) & 0x1f) + 1)
+#endif
+
/*
* Instead of having two separate multipliers/divisors set, like this:
*
@@ -139,13 +145,17 @@
* I created the divisors2 array, which is used to calculate rate like
* rate = parent * 2 / divisors2[ divisor ];
*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+static int divisors2[] = { 4, 1, 8, 12, 16, 24, 32, 1, 48, 64, 72, 96, 1, 144 };
+#else
static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 };
+#endif
static void master_clk_recalc(struct clk *clk)
{
unsigned frqcr = ctrl_inl(FRQCR);
- clk->rate = CONFIG_SH_PCLK_FREQ * (((frqcr >> 24) & 0x1f) + 1);
+ clk->rate = CONFIG_SH_PCLK_FREQ * STCPLL(frqcr);
}
static void master_clk_init(struct clk *clk)
@@ -161,13 +171,30 @@
{
unsigned long frqcr = ctrl_inl(FRQCR);
- clk->rate = clk->parent->rate / (((frqcr >> 24) & 0x1f) + 1);
+ clk->rate = clk->parent->rate / STCPLL(frqcr);
}
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define MASTERDIVS { 12, 16, 24, 30, 32, 36, 48 }
+#define STCMASK 0x3f
+#define DIVCALC(div) (div/2-1)
+#define FRQCRKICK 0x80000000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define MASTERDIVS { 6, 8, 12, 16 }
+#define STCMASK 0x1f
+#define DIVCALC(div) (div-1)
+#define FRQCRKICK 0x00000000
+#else
+#define MASTERDIVS { 2, 3, 4, 6, 8, 16 }
+#define STCMASK 0x1f
+#define DIVCALC(div) (div-1)
+#define FRQCRKICK 0x00000000
+#endif
+
static int master_clk_setrate(struct clk *clk, unsigned long rate, int id)
{
int div = rate / clk->rate;
- int master_divs[] = { 2, 3, 4, 6, 8, 16 };
+ int master_divs[] = MASTERDIVS;
int index;
unsigned long frqcr;
@@ -180,8 +207,9 @@
div = master_divs[index - 1];
frqcr = ctrl_inl(FRQCR);
- frqcr &= ~(0xF << 24);
- frqcr |= ( (div-1) << 24);
+ frqcr &= ~(STCMASK << 24);
+ frqcr |= (DIVCALC(div) << 24);
+ frqcr |= FRQCRKICK;
ctrl_outl(frqcr, FRQCR);
return 0;
@@ -377,6 +405,7 @@
/* clear FRQCR bits */
frqcr &= ~(ctx.mask << ctx.shift);
frqcr |= div << ctx.shift;
+ frqcr |= FRQCRKICK;
/* ...and perform actual change */
ctrl_outl(frqcr, FRQCR);
@@ -542,8 +571,8 @@
.flags = CLK_RATE_PROPAGATES,
};
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
-
+#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\
+ !defined(CONFIG_CPU_SUBTYPE_SH7724)
/*
* these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
* methods of clk_ops determine which register they should access by
@@ -560,15 +589,16 @@
.arch_flags = SCLKBCR,
.ops = &sh7722_siu_clk_ops,
};
+#endif /* CONFIG_CPU_SUBTYPE_SH7343, SH7724 */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
static struct clk sh7722_irda_clock = {
.name = "irda_clk",
.arch_flags = IrDACLKCR,
.ops = &sh7722_siu_clk_ops,
};
#endif
-#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
static struct clk sh7722_video_clock = {
.name = "video_clk",
@@ -715,6 +745,61 @@
MSTPCR("vpu0", "bus_clk", 2, 1),
MSTPCR("lcdc0", "bus_clk", 2, 0),
#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+ /* See Datasheet : Overview -> Block Diagram */
+ MSTPCR("tlb0", "cpu_clk", 0, 31),
+ MSTPCR("ic0", "cpu_clk", 0, 30),
+ MSTPCR("oc0", "cpu_clk", 0, 29),
+ MSTPCR("rs0", "bus_clk", 0, 28),
+ MSTPCR("ilmem0", "cpu_clk", 0, 27),
+ MSTPCR("l2c0", "sh_clk", 0, 26),
+ MSTPCR("fpu0", "cpu_clk", 0, 24),
+ MSTPCR("intc0", "peripheral_clk", 0, 22),
+ MSTPCR("dmac0", "bus_clk", 0, 21),
+ MSTPCR("sh0", "sh_clk", 0, 20),
+ MSTPCR("hudi0", "peripheral_clk", 0, 19),
+ MSTPCR("ubc0", "cpu_clk", 0, 17),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15),
+ MSTPCR("cmt0", "r_clk", 0, 14),
+ MSTPCR("rwdt0", "r_clk", 0, 13),
+ MSTPCR("dmac1", "bus_clk", 0, 12),
+ MSTPCR("tmu1", "peripheral_clk", 0, 10),
+ MSTPCR("scif0", "peripheral_clk", 0, 9),
+ MSTPCR("scif1", "peripheral_clk", 0, 8),
+ MSTPCR("scif2", "peripheral_clk", 0, 7),
+ MSTPCR("scif3", "bus_clk", 0, 6),
+ MSTPCR("scif4", "bus_clk", 0, 5),
+ MSTPCR("scif5", "bus_clk", 0, 4),
+ MSTPCR("msiof0", "bus_clk", 0, 2),
+ MSTPCR("msiof1", "bus_clk", 0, 1),
+ MSTPCR("keysc0", "r_clk", 1, 12),
+ MSTPCR("rtc0", "r_clk", 1, 11),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9),
+ MSTPCR("i2c1", "peripheral_clk", 1, 8),
+ MSTPCR("mmc0", "bus_clk", 2, 29),
+ MSTPCR("eth0", "bus_clk", 2, 28),
+ MSTPCR("atapi0", "bus_clk", 2, 26),
+ MSTPCR("tpu0", "bus_clk", 2, 25),
+ MSTPCR("irda0", "peripheral_clk", 2, 24),
+ MSTPCR("tsif0", "bus_clk", 2, 22),
+ MSTPCR("usb1", "bus_clk", 2, 21),
+ MSTPCR("usb0", "bus_clk", 2, 20),
+ MSTPCR("2dg0", "bus_clk", 2, 19),
+ MSTPCR("sdhi0", "bus_clk", 2, 18),
+ MSTPCR("sdhi1", "bus_clk", 2, 17),
+ MSTPCR("veu1", "bus_clk", 2, 15),
+ MSTPCR("ceu1", "bus_clk", 2, 13),
+ MSTPCR("beu1", "bus_clk", 2, 12),
+ MSTPCR("2ddmac0", "sh_clk", 2, 10),
+ MSTPCR("spu0", "bus_clk", 2, 9),
+ MSTPCR("jpu0", "bus_clk", 2, 6),
+ MSTPCR("vou0", "bus_clk", 2, 5),
+ MSTPCR("beu0", "bus_clk", 2, 4),
+ MSTPCR("ceu0", "bus_clk", 2, 3),
+ MSTPCR("veu0", "bus_clk", 2, 2),
+ MSTPCR("vpu0", "bus_clk", 2, 1),
+ MSTPCR("lcdc0", "bus_clk", 2, 0),
+#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7343)
MSTPCR("uram0", "umem_clk", 0, 28),
MSTPCR("xymem0", "bus_clk", 0, 26),
@@ -786,12 +871,15 @@
&sh7722_sh_clock,
&sh7722_peripheral_clock,
&sh7722_sdram_clock,
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
+#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\
+ !defined(CONFIG_CPU_SUBTYPE_SH7724)
&sh7722_siu_a_clock,
&sh7722_siu_b_clock,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
- &sh7722_irda_clock,
#endif
+/* 7724 should support FSI clock */
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
+ &sh7722_irda_clock,
#endif
&sh7722_video_clock,
};
diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
new file mode 100644
index 0000000..1af0f95
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c
@@ -0,0 +1,2230 @@
+/*
+ * SH7724 Pinmux
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Pinmux
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7724.h>
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+ PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+ PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+ PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+ PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+ PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+ PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+ PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+ PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+ PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+ PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+ PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+ PTG5_DATA, PTG4_DATA,
+ PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+ PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+ PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+ PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
+ PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+ PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+ PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+ PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+ PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+ PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+ PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+ PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+ PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+ PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+ PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+ PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+ PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+ PTS6_DATA, PTS5_DATA, PTS4_DATA,
+ PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+ PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+ PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+ PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+ PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+ PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+ PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+ PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+ PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+ PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+ PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+ PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+ PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+ PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+ PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+ PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+ PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+ PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+ PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+ PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+ PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+ PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+ PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
+ PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+ PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+ PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+ PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+ PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+ PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+ PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+ PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+ PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+ PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+ PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+ PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+ PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+ PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+ PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
+ PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+ PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+ PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+ PTS6_IN, PTS5_IN, PTS4_IN,
+ PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+ PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
+ PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+ PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
+ PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+ PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+ PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+ PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+ PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+ PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+ PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+ PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+ PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+ PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+ PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PTA7_IN_PU, PTA6_IN_PU, PTA5_IN_PU, PTA4_IN_PU,
+ PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU,
+ PTB7_IN_PU, PTB6_IN_PU, PTB5_IN_PU, PTB4_IN_PU,
+ PTB3_IN_PU, PTB2_IN_PU, PTB1_IN_PU, PTB0_IN_PU,
+ PTC7_IN_PU, PTC6_IN_PU, PTC5_IN_PU, PTC4_IN_PU,
+ PTC3_IN_PU, PTC2_IN_PU, PTC1_IN_PU, PTC0_IN_PU,
+ PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU,
+ PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU, PTD0_IN_PU,
+ PTE7_IN_PU, PTE6_IN_PU, PTE5_IN_PU, PTE4_IN_PU,
+ PTE3_IN_PU, PTE2_IN_PU, PTE1_IN_PU, PTE0_IN_PU,
+ PTF7_IN_PU, PTF6_IN_PU, PTF5_IN_PU, PTF4_IN_PU,
+ PTF3_IN_PU, PTF2_IN_PU, PTF1_IN_PU, PTF0_IN_PU,
+ PTH7_IN_PU, PTH6_IN_PU, PTH5_IN_PU, PTH4_IN_PU,
+ PTH3_IN_PU, PTH2_IN_PU, PTH1_IN_PU, PTH0_IN_PU,
+ PTJ3_IN_PU, PTJ2_IN_PU, PTJ1_IN_PU, PTJ0_IN_PU,
+ PTK7_IN_PU, PTK6_IN_PU, PTK5_IN_PU, PTK4_IN_PU,
+ PTK3_IN_PU, PTK2_IN_PU, PTK1_IN_PU, PTK0_IN_PU,
+ PTL7_IN_PU, PTL6_IN_PU, PTL5_IN_PU, PTL4_IN_PU,
+ PTL3_IN_PU, PTL2_IN_PU, PTL1_IN_PU, PTL0_IN_PU,
+ PTM7_IN_PU, PTM6_IN_PU, PTM5_IN_PU, PTM4_IN_PU,
+ PTM3_IN_PU, PTM2_IN_PU, PTM1_IN_PU, PTM0_IN_PU,
+ PTN7_IN_PU, PTN6_IN_PU, PTN5_IN_PU, PTN4_IN_PU,
+ PTN3_IN_PU, PTN2_IN_PU, PTN1_IN_PU, PTN0_IN_PU,
+ PTQ7_IN_PU, PTQ6_IN_PU, PTQ5_IN_PU, PTQ4_IN_PU,
+ PTQ3_IN_PU, PTQ2_IN_PU, PTQ1_IN_PU, PTQ0_IN_PU,
+ PTR7_IN_PU, PTR6_IN_PU, PTR5_IN_PU, PTR4_IN_PU,
+ PTR3_IN_PU, PTR2_IN_PU, PTR1_IN_PU, PTR0_IN_PU,
+ PTS6_IN_PU, PTS5_IN_PU, PTS4_IN_PU,
+ PTS3_IN_PU, PTS2_IN_PU, PTS1_IN_PU, PTS0_IN_PU,
+ PTT7_IN_PU, PTT6_IN_PU, PTT5_IN_PU, PTT4_IN_PU,
+ PTT3_IN_PU, PTT2_IN_PU, PTT1_IN_PU, PTT0_IN_PU,
+ PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU,
+ PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+ PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU,
+ PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+ PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU,
+ PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU,
+ PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU,
+ PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU,
+ PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU,
+ PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU,
+ PTZ7_IN_PU, PTZ6_IN_PU, PTZ5_IN_PU, PTZ4_IN_PU,
+ PTZ3_IN_PU, PTZ2_IN_PU, PTZ1_IN_PU, PTZ0_IN_PU,
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+ PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+ PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+ PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+ PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+ PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+ PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+ PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+ PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
+ PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+ PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+ PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+ PTG5_OUT, PTG4_OUT,
+ PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+ PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+ PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+ PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
+ PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+ PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+ PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+ PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+ PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+ PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+ PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+ PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+ PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+ PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+ PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+ PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+ PTR1_OUT, PTR0_OUT,
+ PTS6_OUT, PTS5_OUT, PTS4_OUT,
+ PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+ PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
+ PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+ PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
+ PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+ PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+ PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+ PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+ PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+ PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+ PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+ PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+ PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+ PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+ PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+ PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+ PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+ PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+ PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+ PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+ PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+ PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+ PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
+ PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+ PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+ PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+ PTG5_FN, PTG4_FN,
+ PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+ PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+ PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+ PTJ7_FN, PTJ6_FN, PTJ5_FN,
+ PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+ PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+ PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+ PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+ PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+ PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
+ PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+ PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+ PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+ PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
+ PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+ PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+ PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+ PTS6_FN, PTS5_FN, PTS4_FN,
+ PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+ PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
+ PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+ PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
+ PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+ PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+ PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+ PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+ PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+ PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+ PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+ PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+ PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+ PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+ PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+
+ PSA15_0, PSA15_1,
+ PSA14_0, PSA14_1,
+ PSA13_0, PSA13_1,
+ PSA12_0, PSA12_1,
+ PSA10_0, PSA10_1,
+ PSA9_0, PSA9_1,
+ PSA8_0, PSA8_1,
+ PSA7_0, PSA7_1,
+ PSA6_0, PSA6_1,
+ PSA5_0, PSA5_1,
+ PSA3_0, PSA3_1,
+ PSA2_0, PSA2_1,
+ PSA1_0, PSA1_1,
+ PSA0_0, PSA0_1,
+
+ PSB14_0, PSB14_1,
+ PSB13_0, PSB13_1,
+ PSB12_0, PSB12_1,
+ PSB11_0, PSB11_1,
+ PSB10_0, PSB10_1,
+ PSB9_0, PSB9_1,
+ PSB8_0, PSB8_1,
+ PSB7_0, PSB7_1,
+ PSB6_0, PSB6_1,
+ PSB5_0, PSB5_1,
+ PSB4_0, PSB4_1,
+ PSB3_0, PSB3_1,
+ PSB2_0, PSB2_1,
+ PSB1_0, PSB1_1,
+ PSB0_0, PSB0_1,
+
+ PSC15_0, PSC15_1,
+ PSC14_0, PSC14_1,
+ PSC13_0, PSC13_1,
+ PSC12_0, PSC12_1,
+ PSC11_0, PSC11_1,
+ PSC10_0, PSC10_1,
+ PSC9_0, PSC9_1,
+ PSC8_0, PSC8_1,
+ PSC7_0, PSC7_1,
+ PSC6_0, PSC6_1,
+ PSC5_0, PSC5_1,
+ PSC4_0, PSC4_1,
+ PSC2_0, PSC2_1,
+ PSC1_0, PSC1_1,
+ PSC0_0, PSC0_1,
+
+ PSD15_0, PSD15_1,
+ PSD14_0, PSD14_1,
+ PSD13_0, PSD13_1,
+ PSD12_0, PSD12_1,
+ PSD11_0, PSD11_1,
+ PSD10_0, PSD10_1,
+ PSD9_0, PSD9_1,
+ PSD8_0, PSD8_1,
+ PSD7_0, PSD7_1,
+ PSD6_0, PSD6_1,
+ PSD5_0, PSD5_1,
+ PSD4_0, PSD4_1,
+ PSD3_0, PSD3_1,
+ PSD2_0, PSD2_1,
+ PSD1_0, PSD1_1,
+ PSD0_0, PSD0_1,
+
+ PSE15_0, PSE15_1,
+ PSE14_0, PSE14_1,
+ PSE13_0, PSE13_1,
+ PSE12_0, PSE12_1,
+ PSE11_0, PSE11_1,
+ PSE10_0, PSE10_1,
+ PSE9_0, PSE9_1,
+ PSE8_0, PSE8_1,
+ PSE7_0, PSE7_1,
+ PSE6_0, PSE6_1,
+ PSE5_0, PSE5_1,
+ PSE4_0, PSE4_1,
+ PSE3_0, PSE3_1,
+ PSE2_0, PSE2_1,
+ PSE1_0, PSE1_1,
+ PSE0_0, PSE0_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ /*PTA*/
+ D23_MARK, KEYOUT2_MARK, IDED15_MARK,
+ D22_MARK, KEYOUT1_MARK, IDED14_MARK,
+ D21_MARK, KEYOUT0_MARK, IDED13_MARK,
+ D20_MARK, KEYIN4_MARK, IDED12_MARK,
+ D19_MARK, KEYIN3_MARK, IDED11_MARK,
+ D18_MARK, KEYIN2_MARK, IDED10_MARK,
+ D17_MARK, KEYIN1_MARK, IDED9_MARK,
+ D16_MARK, KEYIN0_MARK, IDED8_MARK,
+
+ /*PTB*/
+ D31_MARK, TPUTO1_MARK, IDEA1_MARK,
+ D30_MARK, TPUTO0_MARK, IDEA0_MARK,
+ D29_MARK, IODREQ_MARK,
+ D28_MARK, IDECS0_MARK,
+ D27_MARK, IDECS1_MARK,
+ D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK,
+ D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK,
+ D24_MARK, KEYOUT3_MARK, IDEINT_MARK,
+
+ /*PTC*/
+ LCDD7_MARK,
+ LCDD6_MARK,
+ LCDD5_MARK,
+ LCDD4_MARK,
+ LCDD3_MARK,
+ LCDD2_MARK,
+ LCDD1_MARK,
+ LCDD0_MARK,
+
+ /*PTD*/
+ LCDD15_MARK,
+ LCDD14_MARK,
+ LCDD13_MARK,
+ LCDD12_MARK,
+ LCDD11_MARK,
+ LCDD10_MARK,
+ LCDD9_MARK,
+ LCDD8_MARK,
+
+ /*PTE*/
+ FSIMCKB_MARK,
+ FSIMCKA_MARK,
+ LCDD21_MARK, SCIF2_L_TXD_MARK,
+ LCDD20_MARK, SCIF4_SCK_MARK,
+ LCDD19_MARK, SCIF4_RXD_MARK,
+ LCDD18_MARK, SCIF4_TXD_MARK,
+ LCDD17_MARK,
+ LCDD16_MARK,
+
+ /*PTF*/
+ LCDVSYN_MARK,
+ LCDDISP_MARK, LCDRS_MARK,
+ LCDHSYN_MARK, LCDCS_MARK,
+ LCDDON_MARK,
+ LCDDCK_MARK, LCDWR_MARK,
+ LCDVEPWC_MARK, SCIF0_TXD_MARK,
+ LCDD23_MARK, SCIF2_L_SCK_MARK,
+ LCDD22_MARK, SCIF2_L_RXD_MARK,
+
+ /*PTG*/
+ AUDCK_MARK,
+ AUDSYNC_MARK,
+ AUDATA3_MARK,
+ AUDATA2_MARK,
+ AUDATA1_MARK,
+ AUDATA0_MARK,
+
+ /*PTH*/
+ VIO0_VD_MARK,
+ VIO0_CLK_MARK,
+ VIO0_D7_MARK,
+ VIO0_D6_MARK,
+ VIO0_D5_MARK,
+ VIO0_D4_MARK,
+ VIO0_D3_MARK,
+ VIO0_D2_MARK,
+
+ /*PTJ*/
+ PDSTATUS_MARK,
+ STATUS2_MARK,
+ STATUS0_MARK,
+ A25_MARK, BS_MARK,
+ A24_MARK,
+ A23_MARK,
+ A22_MARK,
+
+ /*PTK*/
+ VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK,
+ VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK,
+ VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK,
+ VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK,
+ VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK,
+ VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK,
+ VIO0_FLD_MARK,
+ VIO0_HD_MARK,
+
+ /*PTL*/
+ DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK,
+ DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK,
+ DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK,
+ DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK,
+ DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK,
+ DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK,
+ DV_D15_MARK,
+ DV_D14_MARK, MSIOF0_MCK_MARK,
+
+ /*PTM*/
+ DV_D13_MARK, MSIOF0_TSCK_MARK,
+ DV_D12_MARK, MSIOF0_RXD_MARK,
+ DV_D11_MARK, MSIOF0_TXD_MARK,
+ DV_D10_MARK, MSIOF0_TSYNC_MARK,
+ DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK,
+ DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK,
+ LCDVCPWC_MARK, SCIF0_RXD_MARK,
+ LCDRD_MARK, SCIF0_SCK_MARK,
+
+ /*PTN*/
+ VIO0_D1_MARK,
+ VIO0_D0_MARK,
+ DV_CLKI_MARK,
+ DV_CLK_MARK, SCIF2_V_SCK_MARK,
+ DV_VSYNC_MARK, SCIF2_V_RXD_MARK,
+ DV_HSYNC_MARK, SCIF2_V_TXD_MARK,
+ DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK,
+ DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK,
+
+ /*PTQ*/
+ D7_MARK,
+ D6_MARK,
+ D5_MARK,
+ D4_MARK,
+ D3_MARK,
+ D2_MARK,
+ D1_MARK,
+ D0_MARK,
+
+ /*PTR*/
+ CS6B_CE1B_MARK,
+ CS6A_CE2B_MARK,
+ CS5B_CE1A_MARK,
+ CS5A_CE2A_MARK,
+ IOIS16_MARK, LCDLCLK_MARK,
+ WAIT_MARK,
+ WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK,
+ WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK,
+
+ /*PTS*/
+ VIO_CKO_MARK,
+ VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK,
+ VIO1_HD_MARK, SCIF5_SCK_MARK,
+ VIO1_VD_MARK, SCIF5_RXD_MARK,
+ VIO1_CLK_MARK, SCIF5_TXD_MARK,
+ VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK,
+ VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK,
+
+ /*PTT*/
+ D15_MARK,
+ D14_MARK,
+ D13_MARK,
+ D12_MARK,
+ D11_MARK,
+ D10_MARK,
+ D9_MARK,
+ D8_MARK,
+
+ /*PTU*/
+ DMAC_DACK0_MARK,
+ DMAC_DREQ0_MARK,
+ FSIOASD_MARK,
+ FSIIABCK_MARK,
+ FSIIALRCK_MARK,
+ FSIOABCK_MARK,
+ FSIOALRCK_MARK,
+ CLKAUDIOAO_MARK,
+
+ /*PTV*/
+ FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK,
+ FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK,
+ FSIIBBCK_MARK, MSIOF1_RXD_MARK,
+ FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK,
+ FSIOBBCK_MARK, MSIOF1_TSCK_MARK,
+ FSIOBLRCK_MARK, MSIOF1_TXD_MARK,
+ CLKAUDIOBO_MARK, MSIOF1_MCK_MARK,
+ FSIIASD_MARK,
+
+ /*PTW*/
+ MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK,
+ MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK,
+ MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK,
+ MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK,
+ MMC_D3_MARK, SDHI1D1_MARK,
+ MMC_D2_MARK, SDHI1D0_MARK,
+ MMC_D1_MARK, SDHI1CMD_MARK,
+ MMC_D0_MARK, SDHI1CLK_MARK,
+
+ /*PTX*/
+ DMAC_DACK1_MARK, IRDA_OUT_MARK,
+ DMAC_DREQ1_MARK, IRDA_IN_MARK,
+ TSIF_TS0_SDAT_MARK, LNKSTA_MARK,
+ TSIF_TS0_SCK_MARK, MDIO_MARK,
+ TSIF_TS0_SDEN_MARK, MDC_MARK,
+ TSIF_TS0_SPSYNC_MARK,
+ MMC_CLK_MARK,
+ MMC_CMD_MARK,
+
+ /*PTY*/
+ SDHI0CD_MARK,
+ SDHI0WP_MARK,
+ SDHI0D3_MARK,
+ SDHI0D2_MARK,
+ SDHI0D1_MARK,
+ SDHI0D0_MARK,
+ SDHI0CMD_MARK,
+ SDHI0CLK_MARK,
+
+ /*PTZ*/
+ INTC_IRQ7_MARK, SCIF3_I_CTS_MARK,
+ INTC_IRQ6_MARK, SCIF3_I_RTS_MARK,
+ INTC_IRQ5_MARK, SCIF3_I_SCK_MARK,
+ INTC_IRQ4_MARK, SCIF3_I_RXD_MARK,
+ INTC_IRQ3_MARK, SCIF3_I_TXD_MARK,
+ INTC_IRQ2_MARK,
+ INTC_IRQ1_MARK,
+ INTC_IRQ0_MARK,
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ /* PTA GPIO */
+ PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT, PTA7_IN_PU),
+ PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT, PTA6_IN_PU),
+ PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT, PTA5_IN_PU),
+ PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU),
+ PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU),
+ PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU),
+ PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU),
+ PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU),
+
+ /* PTB GPIO */
+ PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT, PTB7_IN_PU),
+ PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT, PTB6_IN_PU),
+ PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT, PTB5_IN_PU),
+ PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT, PTB4_IN_PU),
+ PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT, PTB3_IN_PU),
+ PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU),
+ PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU),
+ PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT, PTB0_IN_PU),
+
+ /* PTC GPIO */
+ PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT, PTC7_IN_PU),
+ PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT, PTC6_IN_PU),
+ PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT, PTC5_IN_PU),
+ PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT, PTC4_IN_PU),
+ PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT, PTC3_IN_PU),
+ PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT, PTC2_IN_PU),
+ PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT, PTC1_IN_PU),
+ PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT, PTC0_IN_PU),
+
+ /* PTD GPIO */
+ PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT, PTD7_IN_PU),
+ PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT, PTD6_IN_PU),
+ PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT, PTD5_IN_PU),
+ PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT, PTD4_IN_PU),
+ PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT, PTD3_IN_PU),
+ PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT, PTD2_IN_PU),
+ PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT, PTD1_IN_PU),
+ PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT, PTD0_IN_PU),
+
+ /* PTE GPIO */
+ PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT, PTE7_IN_PU),
+ PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT, PTE6_IN_PU),
+ PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT, PTE5_IN_PU),
+ PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT, PTE4_IN_PU),
+ PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT, PTE3_IN_PU),
+ PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT, PTE2_IN_PU),
+ PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT, PTE1_IN_PU),
+ PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT, PTE0_IN_PU),
+
+ /* PTF GPIO */
+ PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT, PTF7_IN_PU),
+ PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT, PTF6_IN_PU),
+ PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT, PTF5_IN_PU),
+ PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT, PTF4_IN_PU),
+ PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT, PTF3_IN_PU),
+ PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT, PTF2_IN_PU),
+ PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT, PTF1_IN_PU),
+ PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT, PTF0_IN_PU),
+
+ /* PTG GPIO */
+ PINMUX_DATA(PTG5_DATA, PTG5_OUT),
+ PINMUX_DATA(PTG4_DATA, PTG4_OUT),
+ PINMUX_DATA(PTG3_DATA, PTG3_OUT),
+ PINMUX_DATA(PTG2_DATA, PTG2_OUT),
+ PINMUX_DATA(PTG1_DATA, PTG1_OUT),
+ PINMUX_DATA(PTG0_DATA, PTG0_OUT),
+
+ /* PTH GPIO */
+ PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT, PTH7_IN_PU),
+ PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT, PTH6_IN_PU),
+ PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT, PTH5_IN_PU),
+ PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT, PTH4_IN_PU),
+ PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT, PTH3_IN_PU),
+ PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT, PTH2_IN_PU),
+ PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT, PTH1_IN_PU),
+ PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT, PTH0_IN_PU),
+
+ /* PTJ GPIO */
+ PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
+ PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
+ PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
+ PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT, PTJ3_IN_PU),
+ PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT, PTJ2_IN_PU),
+ PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT, PTJ1_IN_PU),
+ PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT, PTJ0_IN_PU),
+
+ /* PTK GPIO */
+ PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT, PTK7_IN_PU),
+ PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT, PTK6_IN_PU),
+ PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT, PTK5_IN_PU),
+ PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT, PTK4_IN_PU),
+ PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT, PTK3_IN_PU),
+ PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT, PTK2_IN_PU),
+ PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT, PTK1_IN_PU),
+ PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT, PTK0_IN_PU),
+
+ /* PTL GPIO */
+ PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT, PTL7_IN_PU),
+ PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT, PTL6_IN_PU),
+ PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT, PTL5_IN_PU),
+ PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT, PTL4_IN_PU),
+ PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT, PTL3_IN_PU),
+ PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT, PTL2_IN_PU),
+ PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT, PTL1_IN_PU),
+ PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT, PTL0_IN_PU),
+
+ /* PTM GPIO */
+ PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT, PTM7_IN_PU),
+ PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT, PTM6_IN_PU),
+ PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT, PTM5_IN_PU),
+ PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT, PTM4_IN_PU),
+ PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT, PTM3_IN_PU),
+ PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT, PTM2_IN_PU),
+ PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT, PTM1_IN_PU),
+ PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT, PTM0_IN_PU),
+
+ /* PTN GPIO */
+ PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT, PTN7_IN_PU),
+ PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT, PTN6_IN_PU),
+ PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT, PTN5_IN_PU),
+ PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT, PTN4_IN_PU),
+ PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT, PTN3_IN_PU),
+ PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT, PTN2_IN_PU),
+ PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT, PTN1_IN_PU),
+ PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT, PTN0_IN_PU),
+
+ /* PTQ GPIO */
+ PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT, PTQ7_IN_PU),
+ PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT, PTQ6_IN_PU),
+ PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT, PTQ5_IN_PU),
+ PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT, PTQ4_IN_PU),
+ PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT, PTQ3_IN_PU),
+ PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT, PTQ2_IN_PU),
+ PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT, PTQ1_IN_PU),
+ PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT, PTQ0_IN_PU),
+
+ /* PTR GPIO */
+ PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT, PTR7_IN_PU),
+ PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT, PTR6_IN_PU),
+ PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT, PTR5_IN_PU),
+ PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT, PTR4_IN_PU),
+ PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_IN_PU),
+ PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_IN_PU),
+ PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT, PTR1_IN_PU),
+ PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT, PTR0_IN_PU),
+
+ /* PTS GPIO */
+ PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT, PTS6_IN_PU),
+ PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT, PTS5_IN_PU),
+ PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT, PTS4_IN_PU),
+ PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT, PTS3_IN_PU),
+ PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT, PTS2_IN_PU),
+ PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT, PTS1_IN_PU),
+ PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT, PTS0_IN_PU),
+
+ /* PTT GPIO */
+ PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT, PTT7_IN_PU),
+ PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT, PTT6_IN_PU),
+ PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT, PTT5_IN_PU),
+ PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT, PTT4_IN_PU),
+ PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT, PTT3_IN_PU),
+ PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT, PTT2_IN_PU),
+ PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT, PTT1_IN_PU),
+ PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT, PTT0_IN_PU),
+
+ /* PTU GPIO */
+ PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT, PTU7_IN_PU),
+ PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT, PTU6_IN_PU),
+ PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT, PTU5_IN_PU),
+ PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT, PTU4_IN_PU),
+ PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT, PTU3_IN_PU),
+ PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT, PTU2_IN_PU),
+ PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT, PTU1_IN_PU),
+ PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT, PTU0_IN_PU),
+
+ /* PTV GPIO */
+ PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT, PTV7_IN_PU),
+ PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT, PTV6_IN_PU),
+ PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT, PTV5_IN_PU),
+ PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT, PTV4_IN_PU),
+ PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT, PTV3_IN_PU),
+ PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT, PTV2_IN_PU),
+ PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT, PTV1_IN_PU),
+ PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT, PTV0_IN_PU),
+
+ /* PTW GPIO */
+ PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT, PTW7_IN_PU),
+ PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT, PTW6_IN_PU),
+ PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT, PTW5_IN_PU),
+ PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT, PTW4_IN_PU),
+ PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT, PTW3_IN_PU),
+ PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT, PTW2_IN_PU),
+ PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT, PTW1_IN_PU),
+ PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT, PTW0_IN_PU),
+
+ /* PTX GPIO */
+ PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT, PTX7_IN_PU),
+ PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT, PTX6_IN_PU),
+ PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT, PTX5_IN_PU),
+ PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT, PTX4_IN_PU),
+ PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT, PTX3_IN_PU),
+ PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT, PTX2_IN_PU),
+ PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT, PTX1_IN_PU),
+ PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT, PTX0_IN_PU),
+
+ /* PTY GPIO */
+ PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT, PTY7_IN_PU),
+ PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT, PTY6_IN_PU),
+ PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT, PTY5_IN_PU),
+ PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT, PTY4_IN_PU),
+ PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT, PTY3_IN_PU),
+ PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT, PTY2_IN_PU),
+ PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT, PTY1_IN_PU),
+ PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT, PTY0_IN_PU),
+
+ /* PTZ GPIO */
+ PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT, PTZ7_IN_PU),
+ PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT, PTZ6_IN_PU),
+ PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT, PTZ5_IN_PU),
+ PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT, PTZ4_IN_PU),
+ PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT, PTZ3_IN_PU),
+ PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT, PTZ2_IN_PU),
+ PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT, PTZ1_IN_PU),
+ PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT, PTZ0_IN_PU),
+
+ /* PTA FN */
+ PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN),
+ PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN),
+ PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN),
+ PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN),
+ PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN),
+ PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN),
+ PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN),
+ PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN),
+
+ PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN),
+ PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN),
+ PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN),
+ PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN),
+ PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN),
+ PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN),
+ PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN),
+ PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN),
+
+ PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN),
+ PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN),
+ PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN),
+ PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN),
+ PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN),
+ PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN),
+ PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN),
+ PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN),
+
+ /* PTB FN */
+ PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN),
+ PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN),
+ PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN),
+ PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN),
+ PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN),
+ PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN),
+ PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN),
+ PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN),
+
+ PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN),
+ PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN),
+ PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN),
+ PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN),
+ PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN),
+ PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN),
+ PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN),
+ PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN),
+
+ PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN),
+ PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN),
+
+ PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN),
+ PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN),
+ PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN),
+
+ /* PTC FN */
+ PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
+ PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
+ PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
+ PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
+ PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
+ PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
+ PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
+ PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
+
+ /* PTD FN */
+ PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
+ PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
+ PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
+ PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
+ PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
+ PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
+ PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN),
+ PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN),
+
+ /* PTE FN */
+ PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
+ PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
+
+ PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN),
+ PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN),
+ PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN),
+ PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN),
+ PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN),
+ PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN),
+
+ PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN),
+ PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN),
+ PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN),
+ PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN),
+
+ /* PTF FN */
+ PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN),
+ PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN),
+ PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN),
+ PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN),
+ PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN),
+ PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN),
+ PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN),
+ PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN),
+
+ PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN),
+ PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN),
+ PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN),
+
+ PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN),
+ PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN),
+ PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN),
+
+ /* PTG FN */
+ PINMUX_DATA(AUDCK_MARK, PTG5_FN),
+ PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
+ PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
+ PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
+ PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
+ PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
+
+ /* PTH FN */
+ PINMUX_DATA(VIO0_VD_MARK, PTH7_FN),
+ PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
+ PINMUX_DATA(VIO0_D7_MARK, PTH5_FN),
+ PINMUX_DATA(VIO0_D6_MARK, PTH4_FN),
+ PINMUX_DATA(VIO0_D5_MARK, PTH3_FN),
+ PINMUX_DATA(VIO0_D4_MARK, PTH2_FN),
+ PINMUX_DATA(VIO0_D3_MARK, PTH1_FN),
+ PINMUX_DATA(VIO0_D2_MARK, PTH0_FN),
+
+ /* PTJ FN */
+ PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN),
+ PINMUX_DATA(STATUS2_MARK, PTJ6_FN),
+ PINMUX_DATA(STATUS0_MARK, PTJ5_FN),
+ PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN),
+ PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN),
+ PINMUX_DATA(A24_MARK, PTJ2_FN),
+ PINMUX_DATA(A23_MARK, PTJ1_FN),
+ PINMUX_DATA(A22_MARK, PTJ0_FN),
+
+ /* PTK FN */
+ PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN),
+ PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN),
+ PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN),
+ PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN),
+ PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN),
+ PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN),
+
+ PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN),
+ PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN),
+ PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN),
+ PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN),
+ PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN),
+ PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN),
+
+ PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN),
+ PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN),
+ PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN),
+ PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN),
+ PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN),
+ PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN),
+
+ PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN),
+ PINMUX_DATA(VIO0_HD_MARK, PTK0_FN),
+
+ /* PTL FN */
+ PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN),
+ PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN),
+ PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN),
+ PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN),
+ PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN),
+ PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN),
+ PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN),
+ PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN),
+
+ PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN),
+ PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN),
+ PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN),
+ PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN),
+ PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN),
+ PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN),
+
+ PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN),
+ PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN),
+ PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN),
+ PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN),
+ PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN),
+ PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN),
+
+ PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN),
+
+ /* PTM FN */
+ PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN),
+ PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN),
+ PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN),
+ PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN),
+ PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN),
+ PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN),
+
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN),
+
+ PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN),
+ PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN),
+
+ PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN),
+ PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN),
+
+ /* PTN FN */
+ PINMUX_DATA(VIO0_D1_MARK, PTN7_FN),
+ PINMUX_DATA(VIO0_D0_MARK, PTN6_FN),
+
+ PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN),
+ PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN),
+ PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN),
+ PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN),
+ PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN),
+ PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN),
+
+ PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN),
+ PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN),
+ PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN),
+ PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN),
+ PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN),
+
+ PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN),
+ PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN),
+
+ /* PTQ FN */
+ PINMUX_DATA(D7_MARK, PTQ7_FN),
+ PINMUX_DATA(D6_MARK, PTQ6_FN),
+ PINMUX_DATA(D5_MARK, PTQ5_FN),
+ PINMUX_DATA(D4_MARK, PTQ4_FN),
+ PINMUX_DATA(D3_MARK, PTQ3_FN),
+ PINMUX_DATA(D2_MARK, PTQ2_FN),
+ PINMUX_DATA(D1_MARK, PTQ1_FN),
+ PINMUX_DATA(D0_MARK, PTQ0_FN),
+
+ /* PTR FN */
+ PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
+ PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
+ PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
+ PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
+ PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN),
+ PINMUX_DATA(WAIT_MARK, PTR2_FN),
+ PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN),
+ PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN),
+
+ PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN),
+
+ PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN),
+
+ PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN),
+ PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN),
+ PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN),
+
+ /* PTS FN */
+ PINMUX_DATA(VIO_CKO_MARK, PTS6_FN),
+
+ PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN),
+
+ PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN),
+
+ PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN),
+ PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN),
+ PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN),
+ PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN),
+ PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN),
+ PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN),
+
+ PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN),
+ PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN),
+ PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN),
+
+ PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN),
+ PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN),
+
+ PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN),
+ PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN),
+
+ /* PTT FN */
+ PINMUX_DATA(D15_MARK, PTT7_FN),
+ PINMUX_DATA(D14_MARK, PTT6_FN),
+ PINMUX_DATA(D13_MARK, PTT5_FN),
+ PINMUX_DATA(D12_MARK, PTT4_FN),
+ PINMUX_DATA(D11_MARK, PTT3_FN),
+ PINMUX_DATA(D10_MARK, PTT2_FN),
+ PINMUX_DATA(D9_MARK, PTT1_FN),
+ PINMUX_DATA(D8_MARK, PTT0_FN),
+
+ /* PTU FN */
+ PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
+ PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
+
+ PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN),
+ PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN),
+ PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN),
+ PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN),
+ PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN),
+ PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN),
+
+ /* PTV FN */
+ PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN),
+ PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN),
+ PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN),
+ PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN),
+ PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN),
+ PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN),
+ PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN),
+ PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN),
+
+ PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN),
+ PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN),
+ PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN),
+ PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN),
+ PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN),
+ PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN),
+ PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN),
+
+ /* PTW FN */
+ PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN),
+ PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN),
+ PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN),
+ PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN),
+ PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN),
+ PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN),
+ PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN),
+ PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN),
+
+ PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN),
+ PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN),
+ PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN),
+ PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN),
+ PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN),
+ PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN),
+ PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN),
+ PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN),
+
+ PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN),
+ PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN),
+ PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN),
+ PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN),
+
+ /* PTX FN */
+ PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN),
+ PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN),
+
+ PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN),
+ PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN),
+
+ PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN),
+ PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN),
+ PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN),
+ PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN),
+
+ PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN),
+ PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN),
+ PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN),
+
+ PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
+ PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
+
+ /* PTY FN */
+ PINMUX_DATA(SDHI0CD_MARK, PTY7_FN),
+ PINMUX_DATA(SDHI0WP_MARK, PTY6_FN),
+ PINMUX_DATA(SDHI0D3_MARK, PTY5_FN),
+ PINMUX_DATA(SDHI0D2_MARK, PTY4_FN),
+ PINMUX_DATA(SDHI0D1_MARK, PTY3_FN),
+ PINMUX_DATA(SDHI0D0_MARK, PTY2_FN),
+ PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
+ PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
+
+ /* PTZ FN */
+ PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN),
+ PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN),
+ PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN),
+ PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN),
+ PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN),
+ PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN),
+ PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN),
+ PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN),
+
+ PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN),
+ PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN),
+ PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN),
+ PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN),
+ PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ /* PTA */
+ PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+ PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+ PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+ PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+ PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+ PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+ PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+ PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+ /* PTB */
+ PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+ PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+ PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+ PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+ PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+ PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+ PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+ PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+ /* PTC */
+ PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+ PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+ PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+ PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+ PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+ PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+ PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+ PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+ /* PTD */
+ PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+ PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+ PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+ PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+ PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+ PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+ PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+ PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+ /* PTE */
+ PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+ PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+ PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+ PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+ PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+ PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+ PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+ PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+ /* PTF */
+ PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+ PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+ PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+ PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+ PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+ PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+ PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+ PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+ /* PTG */
+ PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+ PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+ PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+ PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+ PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+ PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+ /* PTH */
+ PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+ PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+ PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+ PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+ PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+ PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+ PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+ PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+ /* PTJ */
+ PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+ PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+ PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+ PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+ PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+ PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+ PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+ /* PTK */
+ PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+ PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+ PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+ PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+ PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+ PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+ PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+ PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+ /* PTL */
+ PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+ PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+ PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+ PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+ PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+ PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+ PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+ PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+ /* PTM */
+ PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+ PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+ PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+ PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+ PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+ PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+ PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+ PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+ /* PTN */
+ PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+ PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+ PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+ PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+ PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+ PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+ PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+ PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+ /* PTQ */
+ PINMUX_GPIO(GPIO_PTQ7, PTQ7_DATA),
+ PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+ PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+ PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+ PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+ PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+ PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+ PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+ /* PTR */
+ PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+ PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+ PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+ PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+ PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+ PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+ PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+ PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+ /* PTS */
+ PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+ PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+ PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+ PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+ PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+ PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+ PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+ /* PTT */
+ PINMUX_GPIO(GPIO_PTT7, PTT7_DATA),
+ PINMUX_GPIO(GPIO_PTT6, PTT6_DATA),
+ PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+ PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+ PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+ PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+ PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+ PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+ /* PTU */
+ PINMUX_GPIO(GPIO_PTU7, PTU7_DATA),
+ PINMUX_GPIO(GPIO_PTU6, PTU6_DATA),
+ PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+ PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+ PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+ PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+ PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+ PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+ /* PTV */
+ PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+ PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+ PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+ PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+ PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+ PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+ PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+ PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+ /* PTW */
+ PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+ PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+ PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+ PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+ PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+ PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+ PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+ PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+ /* PTX */
+ PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+ PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+ PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+ PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+ PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+ PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+ PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+ PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+ /* PTY */
+ PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+ PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+ PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+ PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+ PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+ PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+ PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+ PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+ /* PTZ */
+ PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+ PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+ PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+ PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+ PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+ PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+ PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+ PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+ /* BSC */
+ PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+ PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+ PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+ PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+ PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+ PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+ PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+ PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+ PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+ PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+ PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+ PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+ PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+ PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+ PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+ PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+ PINMUX_GPIO(GPIO_FN_D15, D15_MARK),
+ PINMUX_GPIO(GPIO_FN_D14, D14_MARK),
+ PINMUX_GPIO(GPIO_FN_D13, D13_MARK),
+ PINMUX_GPIO(GPIO_FN_D12, D12_MARK),
+ PINMUX_GPIO(GPIO_FN_D11, D11_MARK),
+ PINMUX_GPIO(GPIO_FN_D10, D10_MARK),
+ PINMUX_GPIO(GPIO_FN_D9, D9_MARK),
+ PINMUX_GPIO(GPIO_FN_D8, D8_MARK),
+ PINMUX_GPIO(GPIO_FN_D7, D7_MARK),
+ PINMUX_GPIO(GPIO_FN_D6, D6_MARK),
+ PINMUX_GPIO(GPIO_FN_D5, D5_MARK),
+ PINMUX_GPIO(GPIO_FN_D4, D4_MARK),
+ PINMUX_GPIO(GPIO_FN_D3, D3_MARK),
+ PINMUX_GPIO(GPIO_FN_D2, D2_MARK),
+ PINMUX_GPIO(GPIO_FN_D1, D1_MARK),
+ PINMUX_GPIO(GPIO_FN_D0, D0_MARK),
+ PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+ PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+ PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+ PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+ PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK),
+ PINMUX_GPIO(GPIO_FN_CS6A_CE2B, CS6A_CE2B_MARK),
+ PINMUX_GPIO(GPIO_FN_CS5B_CE1A, CS5B_CE1A_MARK),
+ PINMUX_GPIO(GPIO_FN_CS5A_CE2A, CS5A_CE2A_MARK),
+ PINMUX_GPIO(GPIO_FN_WE3_ICIOWR, WE3_ICIOWR_MARK),
+ PINMUX_GPIO(GPIO_FN_WE2_ICIORD, WE2_ICIORD_MARK),
+ PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+ PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK),
+ PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+
+ /* KEYSC */
+ PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5, KEYOUT5_IN5_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6, KEYOUT4_IN6_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN4, KEYIN4_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN3, KEYIN3_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN2, KEYIN2_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN1, KEYIN1_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN0, KEYIN0_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT3, KEYOUT3_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT2, KEYOUT2_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT1, KEYOUT1_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT0, KEYOUT0_MARK),
+
+ /* ATAPI */
+ PINMUX_GPIO(GPIO_FN_IDED15, IDED15_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED14, IDED14_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED13, IDED13_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED12, IDED12_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED11, IDED11_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED10, IDED10_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED9, IDED9_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED8, IDED8_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED7, IDED7_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED6, IDED6_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED5, IDED5_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED4, IDED4_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED3, IDED3_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED2, IDED2_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED1, IDED1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED0, IDED0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA2, IDEA2_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA1, IDEA1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA0, IDEA0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIOWR, IDEIOWR_MARK),
+ PINMUX_GPIO(GPIO_FN_IODREQ, IODREQ_MARK),
+ PINMUX_GPIO(GPIO_FN_IDECS0, IDECS0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDECS1, IDECS1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIORD, IDEIORD_MARK),
+ PINMUX_GPIO(GPIO_FN_DIRECTION, DIRECTION_MARK),
+ PINMUX_GPIO(GPIO_FN_EXBUF_ENB, EXBUF_ENB_MARK),
+ PINMUX_GPIO(GPIO_FN_IDERST, IDERST_MARK),
+ PINMUX_GPIO(GPIO_FN_IODACK, IODACK_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEINT, IDEINT_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIORDY, IDEIORDY_MARK),
+
+ /* TPU */
+ PINMUX_GPIO(GPIO_FN_TPUTO3, TPUTO3_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO2, TPUTO2_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO1, TPUTO1_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO0, TPUTO0_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTI3, TPUTI3_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTI2, TPUTI2_MARK),
+
+ /* LCDC */
+ PINMUX_GPIO(GPIO_FN_LCDD23, LCDD23_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD22, LCDD22_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD21, LCDD21_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD20, LCDD20_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD19, LCDD19_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD18, LCDD18_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD17, LCDD17_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD16, LCDD16_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD15, LCDD15_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD14, LCDD14_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD13, LCDD13_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD12, LCDD12_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD11, LCDD11_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD10, LCDD10_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD9, LCDD9_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD8, LCDD8_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD7, LCDD7_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD6, LCDD6_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD5, LCDD5_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD4, LCDD4_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD3, LCDD3_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD2, LCDD2_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD1, LCDD1_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD0, LCDD0_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVSYN, LCDVSYN_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDISP, LCDDISP_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDRS, LCDRS_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDHSYN, LCDHSYN_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDCS, LCDCS_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDON, LCDDON_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDCK, LCDDCK_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDWR, LCDWR_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVEPWC, LCDVEPWC_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVCPWC, LCDVCPWC_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDRD, LCDRD_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDLCLK, LCDLCLK_MARK),
+
+ /* SCIF0 */
+ PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+
+ /* SCIF1 */
+ PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+
+ /* SCIF2 */
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_TXD, SCIF2_L_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_SCK, SCIF2_L_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_RXD, SCIF2_L_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_TXD, SCIF2_V_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_SCK, SCIF2_V_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_RXD, SCIF2_V_RXD_MARK),
+
+ /* SCIF3 */
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_SCK, SCIF3_V_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_RXD, SCIF3_V_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_TXD, SCIF3_V_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_CTS, SCIF3_V_CTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_RTS, SCIF3_V_RTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_SCK, SCIF3_I_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_RXD, SCIF3_I_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_TXD, SCIF3_I_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_CTS, SCIF3_I_CTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_RTS, SCIF3_I_RTS_MARK),
+
+ /* SCIF4 */
+ PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK),
+
+ /* SCIF5 */
+ PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK),
+
+ /* FSI */
+ PINMUX_GPIO(GPIO_FN_FSIMCKB, FSIMCKB_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIMCKA, FSIMCKA_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOASD, FSIOASD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIABCK, FSIIABCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIALRCK, FSIIALRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOABCK, FSIOABCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOALRCK, FSIOALRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_CLKAUDIOAO, CLKAUDIOAO_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBSD, FSIIBSD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBSD, FSIOBSD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBBCK, FSIIBBCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBLRCK, FSIIBLRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBBCK, FSIOBBCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBLRCK, FSIOBLRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_CLKAUDIOBO, CLKAUDIOBO_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIASD, FSIIASD_MARK),
+
+ /* AUD */
+ PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+
+ /* VIO */
+ PINMUX_GPIO(GPIO_FN_VIO_CKO, VIO_CKO_MARK),
+
+ /* VIO0 */
+ PINMUX_GPIO(GPIO_FN_VIO0_D15, VIO0_D15_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D14, VIO0_D14_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D13, VIO0_D13_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D12, VIO0_D12_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D11, VIO0_D11_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D10, VIO0_D10_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D9, VIO0_D9_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D8, VIO0_D8_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D7, VIO0_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D6, VIO0_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D5, VIO0_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D4, VIO0_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D3, VIO0_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D2, VIO0_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D1, VIO0_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D0, VIO0_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_VD, VIO0_VD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_CLK, VIO0_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_FLD, VIO0_FLD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_HD, VIO0_HD_MARK),
+
+ /* VIO1 */
+ PINMUX_GPIO(GPIO_FN_VIO1_D7, VIO1_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D6, VIO1_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D5, VIO1_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D4, VIO1_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D3, VIO1_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D2, VIO1_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D1, VIO1_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D0, VIO1_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_FLD, VIO1_FLD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_HD, VIO1_HD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_VD, VIO1_VD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_CLK, VIO1_CLK_MARK),
+
+ /* Eth */
+ PINMUX_GPIO(GPIO_FN_RMII_RXD0, RMII_RXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_RXD1, RMII_RXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TXD0, RMII_TXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TXD1, RMII_TXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_REF_CLK, RMII_REF_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TX_EN, RMII_TX_EN_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_RX_ER, RMII_RX_ER_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_CRS_DV, RMII_CRS_DV_MARK),
+ PINMUX_GPIO(GPIO_FN_LNKSTA, LNKSTA_MARK),
+ PINMUX_GPIO(GPIO_FN_MDIO, MDIO_MARK),
+ PINMUX_GPIO(GPIO_FN_MDC, MDC_MARK),
+
+ /* System */
+ PINMUX_GPIO(GPIO_FN_PDSTATUS, PDSTATUS_MARK),
+ PINMUX_GPIO(GPIO_FN_STATUS2, STATUS2_MARK),
+ PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+
+ /* VOU */
+ PINMUX_GPIO(GPIO_FN_DV_D15, DV_D15_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D14, DV_D14_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D13, DV_D13_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D12, DV_D12_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D11, DV_D11_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D10, DV_D10_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D9, DV_D9_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D8, DV_D8_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D7, DV_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D6, DV_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D5, DV_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D4, DV_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D3, DV_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D2, DV_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D1, DV_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D0, DV_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_CLKI, DV_CLKI_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_CLK, DV_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_VSYNC, DV_VSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_HSYNC, DV_HSYNC_MARK),
+
+ /* MSIOF0 */
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RXD, MSIOF0_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TXD, MSIOF0_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_MCK, MSIOF0_MCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TSCK, MSIOF0_TSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_SS1, MSIOF0_SS1_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_SS2, MSIOF0_SS2_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TSYNC, MSIOF0_TSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RSCK, MSIOF0_RSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RSYNC, MSIOF0_RSYNC_MARK),
+
+ /* MSIOF1 */
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RXD, MSIOF1_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TXD, MSIOF1_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_MCK, MSIOF1_MCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TSCK, MSIOF1_TSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_SS1, MSIOF1_SS1_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_SS2, MSIOF1_SS2_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TSYNC, MSIOF1_TSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RSCK, MSIOF1_RSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RSYNC, MSIOF1_RSYNC_MARK),
+
+ /* DMAC */
+ PINMUX_GPIO(GPIO_FN_DMAC_DACK0, DMAC_DACK0_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DREQ0, DMAC_DREQ0_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DACK1, DMAC_DACK1_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DREQ1, DMAC_DREQ1_MARK),
+
+ /* SDHI0 */
+ PINMUX_GPIO(GPIO_FN_SDHI0CD, SDHI0CD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0WP, SDHI0WP_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0CMD, SDHI0CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0CLK, SDHI0CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D3, SDHI0D3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D2, SDHI0D2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D1, SDHI0D1_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D0, SDHI0D0_MARK),
+
+ /* SDHI1 */
+ PINMUX_GPIO(GPIO_FN_SDHI1CD, SDHI1CD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1WP, SDHI1WP_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1CMD, SDHI1CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1CLK, SDHI1CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D3, SDHI1D3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D2, SDHI1D2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D1, SDHI1D1_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D0, SDHI1D0_MARK),
+
+ /* MMC */
+ PINMUX_GPIO(GPIO_FN_MMC_D7, MMC_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D6, MMC_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D5, MMC_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D4, MMC_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D3, MMC_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D2, MMC_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D1, MMC_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D0, MMC_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_CLK, MMC_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_CMD, MMC_CMD_MARK),
+
+ /* IrDA */
+ PINMUX_GPIO(GPIO_FN_IRDA_OUT, IRDA_OUT_MARK),
+ PINMUX_GPIO(GPIO_FN_IRDA_IN, IRDA_IN_MARK),
+
+ /* TSIF */
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDAT, TSIF_TS0_SDAT_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SCK, TSIF_TS0_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDEN, TSIF_TS0_SDEN_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SPSYNC, TSIF_TS0_SPSYNC_MARK),
+
+ /* IRQ */
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ7, INTC_IRQ7_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ6, INTC_IRQ6_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ5, INTC_IRQ5_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ4, INTC_IRQ4_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ3, INTC_IRQ3_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ2, INTC_IRQ2_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ1, INTC_IRQ1_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ0, INTC_IRQ0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+ PTA7_FN, PTA7_OUT, PTA7_IN_PU, PTA7_IN,
+ PTA6_FN, PTA6_OUT, PTA6_IN_PU, PTA6_IN,
+ PTA5_FN, PTA5_OUT, PTA5_IN_PU, PTA5_IN,
+ PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN,
+ PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN,
+ PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN,
+ PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN,
+ PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN }
+ },
+ { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+ PTB7_FN, PTB7_OUT, PTB7_IN_PU, PTB7_IN,
+ PTB6_FN, PTB6_OUT, PTB6_IN_PU, PTB6_IN,
+ PTB5_FN, PTB5_OUT, PTB5_IN_PU, PTB5_IN,
+ PTB4_FN, PTB4_OUT, PTB4_IN_PU, PTB4_IN,
+ PTB3_FN, PTB3_OUT, PTB3_IN_PU, PTB3_IN,
+ PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN,
+ PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN,
+ PTB0_FN, PTB0_OUT, PTB0_IN_PU, PTB0_IN }
+ },
+ { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+ PTC7_FN, PTC7_OUT, PTC7_IN_PU, PTC7_IN,
+ PTC6_FN, PTC6_OUT, PTC6_IN_PU, PTC6_IN,
+ PTC5_FN, PTC5_OUT, PTC5_IN_PU, PTC5_IN,
+ PTC4_FN, PTC4_OUT, PTC4_IN_PU, PTC4_IN,
+ PTC3_FN, PTC3_OUT, PTC3_IN_PU, PTC3_IN,
+ PTC2_FN, PTC2_OUT, PTC2_IN_PU, PTC2_IN,
+ PTC1_FN, PTC1_OUT, PTC1_IN_PU, PTC1_IN,
+ PTC0_FN, PTC0_OUT, PTC0_IN_PU, PTC0_IN }
+ },
+ { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+ PTD7_FN, PTD7_OUT, PTD7_IN_PU, PTD7_IN,
+ PTD6_FN, PTD6_OUT, PTD6_IN_PU, PTD6_IN,
+ PTD5_FN, PTD5_OUT, PTD5_IN_PU, PTD5_IN,
+ PTD4_FN, PTD4_OUT, PTD4_IN_PU, PTD4_IN,
+ PTD3_FN, PTD3_OUT, PTD3_IN_PU, PTD3_IN,
+ PTD2_FN, PTD2_OUT, PTD2_IN_PU, PTD2_IN,
+ PTD1_FN, PTD1_OUT, PTD1_IN_PU, PTD1_IN,
+ PTD0_FN, PTD0_OUT, PTD0_IN_PU, PTD0_IN }
+ },
+ { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+ PTE7_FN, PTE7_OUT, PTE7_IN_PU, PTE7_IN,
+ PTE6_FN, PTE6_OUT, PTE6_IN_PU, PTE6_IN,
+ PTE5_FN, PTE5_OUT, PTE5_IN_PU, PTE5_IN,
+ PTE4_FN, PTE4_OUT, PTE4_IN_PU, PTE4_IN,
+ PTE3_FN, PTE3_OUT, PTE3_IN_PU, PTE3_IN,
+ PTE2_FN, PTE2_OUT, PTE2_IN_PU, PTE2_IN,
+ PTE1_FN, PTE1_OUT, PTE1_IN_PU, PTE1_IN,
+ PTE0_FN, PTE0_OUT, PTE0_IN_PU, PTE0_IN }
+ },
+ { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+ PTF7_FN, PTF7_OUT, PTF7_IN_PU, PTF7_IN,
+ PTF6_FN, PTF6_OUT, PTF6_IN_PU, PTF6_IN,
+ PTF5_FN, PTF5_OUT, PTF5_IN_PU, PTF5_IN,
+ PTF4_FN, PTF4_OUT, PTF4_IN_PU, PTF4_IN,
+ PTF3_FN, PTF3_OUT, PTF3_IN_PU, PTF3_IN,
+ PTF2_FN, PTF2_OUT, PTF2_IN_PU, PTF2_IN,
+ PTF1_FN, PTF1_OUT, PTF1_IN_PU, PTF1_IN,
+ PTF0_FN, PTF0_OUT, PTF0_IN_PU, PTF0_IN }
+ },
+ { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PTG5_FN, PTG5_OUT, 0, 0,
+ PTG4_FN, PTG4_OUT, 0, 0,
+ PTG3_FN, PTG3_OUT, 0, 0,
+ PTG2_FN, PTG2_OUT, 0, 0,
+ PTG1_FN, PTG1_OUT, 0, 0,
+ PTG0_FN, PTG0_OUT, 0, 0 }
+ },
+ { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+ PTH7_FN, PTH7_OUT, PTH7_IN_PU, PTH7_IN,
+ PTH6_FN, PTH6_OUT, PTH6_IN_PU, PTH6_IN,
+ PTH5_FN, PTH5_OUT, PTH5_IN_PU, PTH5_IN,
+ PTH4_FN, PTH4_OUT, PTH4_IN_PU, PTH4_IN,
+ PTH3_FN, PTH3_OUT, PTH3_IN_PU, PTH3_IN,
+ PTH2_FN, PTH2_OUT, PTH2_IN_PU, PTH2_IN,
+ PTH1_FN, PTH1_OUT, PTH1_IN_PU, PTH1_IN,
+ PTH0_FN, PTH0_OUT, PTH0_IN_PU, PTH0_IN }
+ },
+ { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+ PTJ7_FN, PTJ7_OUT, 0, 0,
+ PTJ6_FN, PTJ6_OUT, 0, 0,
+ PTJ5_FN, PTJ5_OUT, 0, 0,
+ 0, 0, 0, 0,
+ PTJ3_FN, PTJ3_OUT, PTJ3_IN_PU, PTJ3_IN,
+ PTJ2_FN, PTJ2_OUT, PTJ2_IN_PU, PTJ2_IN,
+ PTJ1_FN, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN,
+ PTJ0_FN, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN }
+ },
+ { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+ PTK7_FN, PTK7_OUT, PTK7_IN_PU, PTK7_IN,
+ PTK6_FN, PTK6_OUT, PTK6_IN_PU, PTK6_IN,
+ PTK5_FN, PTK5_OUT, PTK5_IN_PU, PTK5_IN,
+ PTK4_FN, PTK4_OUT, PTK4_IN_PU, PTK4_IN,
+ PTK3_FN, PTK3_OUT, PTK3_IN_PU, PTK3_IN,
+ PTK2_FN, PTK2_OUT, PTK2_IN_PU, PTK2_IN,
+ PTK1_FN, PTK1_OUT, PTK1_IN_PU, PTK1_IN,
+ PTK0_FN, PTK0_OUT, PTK0_IN_PU, PTK0_IN }
+ },
+ { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+ PTL7_FN, PTL7_OUT, PTL7_IN_PU, PTL7_IN,
+ PTL6_FN, PTL6_OUT, PTL6_IN_PU, PTL6_IN,
+ PTL5_FN, PTL5_OUT, PTL5_IN_PU, PTL5_IN,
+ PTL4_FN, PTL4_OUT, PTL4_IN_PU, PTL4_IN,
+ PTL3_FN, PTL3_OUT, PTL3_IN_PU, PTL3_IN,
+ PTL2_FN, PTL2_OUT, PTL2_IN_PU, PTL2_IN,
+ PTL1_FN, PTL1_OUT, PTL1_IN_PU, PTL1_IN,
+ PTL0_FN, PTL0_OUT, PTL0_IN_PU, PTL0_IN }
+ },
+ { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+ PTM7_FN, PTM7_OUT, PTM7_IN_PU, PTM7_IN,
+ PTM6_FN, PTM6_OUT, PTM6_IN_PU, PTM6_IN,
+ PTM5_FN, PTM5_OUT, PTM5_IN_PU, PTM5_IN,
+ PTM4_FN, PTM4_OUT, PTM4_IN_PU, PTM4_IN,
+ PTM3_FN, PTM3_OUT, PTM3_IN_PU, PTM3_IN,
+ PTM2_FN, PTM2_OUT, PTM2_IN_PU, PTM2_IN,
+ PTM1_FN, PTM1_OUT, PTM1_IN_PU, PTM1_IN,
+ PTM0_FN, PTM0_OUT, PTM0_IN_PU, PTM0_IN }
+ },
+ { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) {
+ PTN7_FN, PTN7_OUT, PTN7_IN_PU, PTN7_IN,
+ PTN6_FN, PTN6_OUT, PTN6_IN_PU, PTN6_IN,
+ PTN5_FN, PTN5_OUT, PTN5_IN_PU, PTN5_IN,
+ PTN4_FN, PTN4_OUT, PTN4_IN_PU, PTN4_IN,
+ PTN3_FN, PTN3_OUT, PTN3_IN_PU, PTN3_IN,
+ PTN2_FN, PTN2_OUT, PTN2_IN_PU, PTN2_IN,
+ PTN1_FN, PTN1_OUT, PTN1_IN_PU, PTN1_IN,
+ PTN0_FN, PTN0_OUT, PTN0_IN_PU, PTN0_IN }
+ },
+ { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) {
+ PTQ7_FN, PTQ7_OUT, PTQ7_IN_PU, PTQ7_IN,
+ PTQ6_FN, PTQ6_OUT, PTQ6_IN_PU, PTQ6_IN,
+ PTQ5_FN, PTQ5_OUT, PTQ5_IN_PU, PTQ5_IN,
+ PTQ4_FN, PTQ4_OUT, PTQ4_IN_PU, PTQ4_IN,
+ PTQ3_FN, PTQ3_OUT, PTQ3_IN_PU, PTQ3_IN,
+ PTQ2_FN, PTQ2_OUT, PTQ2_IN_PU, PTQ2_IN,
+ PTQ1_FN, PTQ1_OUT, PTQ1_IN_PU, PTQ1_IN,
+ PTQ0_FN, PTQ0_OUT, PTQ0_IN_PU, PTQ0_IN }
+ },
+ { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) {
+ PTR7_FN, PTR7_OUT, PTR7_IN_PU, PTR7_IN,
+ PTR6_FN, PTR6_OUT, PTR6_IN_PU, PTR6_IN,
+ PTR5_FN, PTR5_OUT, PTR5_IN_PU, PTR5_IN,
+ PTR4_FN, PTR4_OUT, PTR4_IN_PU, PTR4_IN,
+ PTR3_FN, 0, PTR3_IN_PU, PTR3_IN,
+ PTR2_FN, 0, PTR2_IN_PU, PTR2_IN,
+ PTR1_FN, PTR1_OUT, PTR1_IN_PU, PTR1_IN,
+ PTR0_FN, PTR0_OUT, PTR0_IN_PU, PTR0_IN }
+ },
+ { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) {
+ 0, 0, 0, 0,
+ PTS6_FN, PTS6_OUT, PTS6_IN_PU, PTS6_IN,
+ PTS5_FN, PTS5_OUT, PTS5_IN_PU, PTS5_IN,
+ PTS4_FN, PTS4_OUT, PTS4_IN_PU, PTS4_IN,
+ PTS3_FN, PTS3_OUT, PTS3_IN_PU, PTS3_IN,
+ PTS2_FN, PTS2_OUT, PTS2_IN_PU, PTS2_IN,
+ PTS1_FN, PTS1_OUT, PTS1_IN_PU, PTS1_IN,
+ PTS0_FN, PTS0_OUT, PTS0_IN_PU, PTS0_IN }
+ },
+ { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) {
+ PTT7_FN, PTT7_OUT, PTT7_IN_PU, PTT7_IN,
+ PTT6_FN, PTT6_OUT, PTT6_IN_PU, PTT6_IN,
+ PTT5_FN, PTT5_OUT, PTT5_IN_PU, PTT5_IN,
+ PTT4_FN, PTT4_OUT, PTT4_IN_PU, PTT4_IN,
+ PTT3_FN, PTT3_OUT, PTT3_IN_PU, PTT3_IN,
+ PTT2_FN, PTT2_OUT, PTT2_IN_PU, PTT2_IN,
+ PTT1_FN, PTT1_OUT, PTT1_IN_PU, PTT1_IN,
+ PTT0_FN, PTT0_OUT, PTT0_IN_PU, PTT0_IN }
+ },
+ { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) {
+ PTU7_FN, PTU7_OUT, PTU7_IN_PU, PTU7_IN,
+ PTU6_FN, PTU6_OUT, PTU6_IN_PU, PTU6_IN,
+ PTU5_FN, PTU5_OUT, PTU5_IN_PU, PTU5_IN,
+ PTU4_FN, PTU4_OUT, PTU4_IN_PU, PTU4_IN,
+ PTU3_FN, PTU3_OUT, PTU3_IN_PU, PTU3_IN,
+ PTU2_FN, PTU2_OUT, PTU2_IN_PU, PTU2_IN,
+ PTU1_FN, PTU1_OUT, PTU1_IN_PU, PTU1_IN,
+ PTU0_FN, PTU0_OUT, PTU0_IN_PU, PTU0_IN }
+ },
+ { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) {
+ PTV7_FN, PTV7_OUT, PTV7_IN_PU, PTV7_IN,
+ PTV6_FN, PTV6_OUT, PTV6_IN_PU, PTV6_IN,
+ PTV5_FN, PTV5_OUT, PTV5_IN_PU, PTV5_IN,
+ PTV4_FN, PTV4_OUT, PTV4_IN_PU, PTV4_IN,
+ PTV3_FN, PTV3_OUT, PTV3_IN_PU, PTV3_IN,
+ PTV2_FN, PTV2_OUT, PTV2_IN_PU, PTV2_IN,
+ PTV1_FN, PTV1_OUT, PTV1_IN_PU, PTV1_IN,
+ PTV0_FN, PTV0_OUT, PTV0_IN_PU, PTV0_IN }
+ },
+ { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) {
+ PTW7_FN, PTW7_OUT, PTW7_IN_PU, PTW7_IN,
+ PTW6_FN, PTW6_OUT, PTW6_IN_PU, PTW6_IN,
+ PTW5_FN, PTW5_OUT, PTW5_IN_PU, PTW5_IN,
+ PTW4_FN, PTW4_OUT, PTW4_IN_PU, PTW4_IN,
+ PTW3_FN, PTW3_OUT, PTW3_IN_PU, PTW3_IN,
+ PTW2_FN, PTW2_OUT, PTW2_IN_PU, PTW2_IN,
+ PTW1_FN, PTW1_OUT, PTW1_IN_PU, PTW1_IN,
+ PTW0_FN, PTW0_OUT, PTW0_IN_PU, PTW0_IN }
+ },
+ { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) {
+ PTX7_FN, PTX7_OUT, PTX7_IN_PU, PTX7_IN,
+ PTX6_FN, PTX6_OUT, PTX6_IN_PU, PTX6_IN,
+ PTX5_FN, PTX5_OUT, PTX5_IN_PU, PTX5_IN,
+ PTX4_FN, PTX4_OUT, PTX4_IN_PU, PTX4_IN,
+ PTX3_FN, PTX3_OUT, PTX3_IN_PU, PTX3_IN,
+ PTX2_FN, PTX2_OUT, PTX2_IN_PU, PTX2_IN,
+ PTX1_FN, PTX1_OUT, PTX1_IN_PU, PTX1_IN,
+ PTX0_FN, PTX0_OUT, PTX0_IN_PU, PTX0_IN }
+ },
+ { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) {
+ PTY7_FN, PTY7_OUT, PTY7_IN_PU, PTY7_IN,
+ PTY6_FN, PTY6_OUT, PTY6_IN_PU, PTY6_IN,
+ PTY5_FN, PTY5_OUT, PTY5_IN_PU, PTY5_IN,
+ PTY4_FN, PTY4_OUT, PTY4_IN_PU, PTY4_IN,
+ PTY3_FN, PTY3_OUT, PTY3_IN_PU, PTY3_IN,
+ PTY2_FN, PTY2_OUT, PTY2_IN_PU, PTY2_IN,
+ PTY1_FN, PTY1_OUT, PTY1_IN_PU, PTY1_IN,
+ PTY0_FN, PTY0_OUT, PTY0_IN_PU, PTY0_IN }
+ },
+ { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) {
+ PTZ7_FN, PTZ7_OUT, PTZ7_IN_PU, PTZ7_IN,
+ PTZ6_FN, PTZ6_OUT, PTZ6_IN_PU, PTZ6_IN,
+ PTZ5_FN, PTZ5_OUT, PTZ5_IN_PU, PTZ5_IN,
+ PTZ4_FN, PTZ4_OUT, PTZ4_IN_PU, PTZ4_IN,
+ PTZ3_FN, PTZ3_OUT, PTZ3_IN_PU, PTZ3_IN,
+ PTZ2_FN, PTZ2_OUT, PTZ2_IN_PU, PTZ2_IN,
+ PTZ1_FN, PTZ1_OUT, PTZ1_IN_PU, PTZ1_IN,
+ PTZ0_FN, PTZ0_OUT, PTZ0_IN_PU, PTZ0_IN }
+ },
+ { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1) {
+ PSA15_0, PSA15_1,
+ PSA14_0, PSA14_1,
+ PSA13_0, PSA13_1,
+ PSA12_0, PSA12_1,
+ 0, 0,
+ PSA10_0, PSA10_1,
+ PSA9_0, PSA9_1,
+ PSA8_0, PSA8_1,
+ PSA7_0, PSA7_1,
+ PSA6_0, PSA6_1,
+ PSA5_0, PSA5_1,
+ 0, 0,
+ PSA3_0, PSA3_1,
+ PSA2_0, PSA2_1,
+ PSA1_0, PSA1_1,
+ PSA0_0, PSA0_1}
+ },
+ { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1) {
+ 0, 0,
+ PSB14_0, PSB14_1,
+ PSB13_0, PSB13_1,
+ PSB12_0, PSB12_1,
+ PSB11_0, PSB11_1,
+ PSB10_0, PSB10_1,
+ PSB9_0, PSB9_1,
+ PSB8_0, PSB8_1,
+ PSB7_0, PSB7_1,
+ PSB6_0, PSB6_1,
+ PSB5_0, PSB5_1,
+ PSB4_0, PSB4_1,
+ PSB3_0, PSB3_1,
+ PSB2_0, PSB2_1,
+ PSB1_0, PSB1_1,
+ PSB0_0, PSB0_1}
+ },
+ { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1) {
+ PSC15_0, PSC15_1,
+ PSC14_0, PSC14_1,
+ PSC13_0, PSC13_1,
+ PSC12_0, PSC12_1,
+ PSC11_0, PSC11_1,
+ PSC10_0, PSC10_1,
+ PSC9_0, PSC9_1,
+ PSC8_0, PSC8_1,
+ PSC7_0, PSC7_1,
+ PSC6_0, PSC6_1,
+ PSC5_0, PSC5_1,
+ PSC4_0, PSC4_1,
+ 0, 0,
+ PSC2_0, PSC2_1,
+ PSC1_0, PSC1_1,
+ PSC0_0, PSC0_1}
+ },
+ { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1) {
+ PSD15_0, PSD15_1,
+ PSD14_0, PSD14_1,
+ PSD13_0, PSD13_1,
+ PSD12_0, PSD12_1,
+ PSD11_0, PSD11_1,
+ PSD10_0, PSD10_1,
+ PSD9_0, PSD9_1,
+ PSD8_0, PSD8_1,
+ PSD7_0, PSD7_1,
+ PSD6_0, PSD6_1,
+ PSD5_0, PSD5_1,
+ PSD4_0, PSD4_1,
+ PSD3_0, PSD3_1,
+ PSD2_0, PSD2_1,
+ PSD1_0, PSD1_1,
+ PSD0_0, PSD0_1}
+ },
+ { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1) {
+ PSE15_0, PSE15_1,
+ PSE14_0, PSE14_1,
+ PSE13_0, PSE13_1,
+ PSE12_0, PSE12_1,
+ PSE11_0, PSE11_1,
+ PSE10_0, PSE10_1,
+ PSE9_0, PSE9_1,
+ PSE8_0, PSE8_1,
+ PSE7_0, PSE7_1,
+ PSE6_0, PSE6_1,
+ PSE5_0, PSE5_1,
+ PSE4_0, PSE4_1,
+ PSE3_0, PSE3_1,
+ PSE2_0, PSE2_1,
+ PSE1_0, PSE1_1,
+ PSE0_0, PSE0_1}
+ },
+ {}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PADR", 0xa4050120, 8) {
+ PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+ PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+ },
+ { PINMUX_DATA_REG("PBDR", 0xa4050122, 8) {
+ PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+ PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+ },
+ { PINMUX_DATA_REG("PCDR", 0xa4050124, 8) {
+ PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+ PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+ },
+ { PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+ PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+ PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+ },
+ { PINMUX_DATA_REG("PEDR", 0xa4050128, 8) {
+ PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+ PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+ },
+ { PINMUX_DATA_REG("PFDR", 0xa405012a, 8) {
+ PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+ PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+ },
+ { PINMUX_DATA_REG("PGDR", 0xa405012c, 8) {
+ 0, 0, PTG5_DATA, PTG4_DATA,
+ PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+ },
+ { PINMUX_DATA_REG("PHDR", 0xa405012e, 8) {
+ PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+ PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+ },
+ { PINMUX_DATA_REG("PJDR", 0xa4050130, 8) {
+ PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
+ PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+ },
+ { PINMUX_DATA_REG("PKDR", 0xa4050132, 8) {
+ PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+ PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+ },
+ { PINMUX_DATA_REG("PLDR", 0xa4050134, 8) {
+ PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+ PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+ },
+ { PINMUX_DATA_REG("PMDR", 0xa4050136, 8) {
+ PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+ PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+ },
+ { PINMUX_DATA_REG("PNDR", 0xa4050138, 8) {
+ PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+ PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+ },
+ { PINMUX_DATA_REG("PQDR", 0xa405013a, 8) {
+ PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+ PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+ },
+ { PINMUX_DATA_REG("PRDR", 0xa405013c, 8) {
+ PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+ PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+ },
+ { PINMUX_DATA_REG("PSDR", 0xa405013e, 8) {
+ 0, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+ PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+ },
+ { PINMUX_DATA_REG("PTDR", 0xa4050160, 8) {
+ PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+ PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+ },
+ { PINMUX_DATA_REG("PUDR", 0xa4050162, 8) {
+ PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+ PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+ },
+ { PINMUX_DATA_REG("PVDR", 0xa4050164, 8) {
+ PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+ PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+ },
+ { PINMUX_DATA_REG("PWDR", 0xa4050166, 8) {
+ PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+ PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+ },
+ { PINMUX_DATA_REG("PXDR", 0xa4050168, 8) {
+ PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+ PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+ },
+ { PINMUX_DATA_REG("PYDR", 0xa405016a, 8) {
+ PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+ PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+ },
+ { PINMUX_DATA_REG("PZDR", 0xa405016c, 8) {
+ PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+ PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info sh7724_pinmux_info = {
+ .name = "sh7724_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PTA7,
+ .last_gpio = GPIO_FN_INTC_IRQ0,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+ return register_pinmux(&sh7724_pinmux_info);
+}
+arch_initcall(plat_pinmux_setup);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index c154938..cb5b4db 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -234,6 +234,16 @@
}
__initcall(sh7343_devices_setup);
+static struct platform_device *sh7343_early_devices[] __initdata = {
+ &cmt_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7343_early_devices,
+ ARRAY_SIZE(sh7343_early_devices));
+}
+
enum {
UNUSED = 0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 93ecf8e..2a771f4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -226,6 +226,16 @@
}
__initcall(sh7366_devices_setup);
+static struct platform_device *sh7366_early_devices[] __initdata = {
+ &cmt_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7366_early_devices,
+ ARRAY_SIZE(sh7366_early_devices));
+}
+
enum {
UNUSED=0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 406747f..793c50d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -269,6 +269,16 @@
}
__initcall(sh7722_devices_setup);
+static struct platform_device *sh7722_early_devices[] __initdata = {
+ &cmt_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7722_early_devices,
+ ARRAY_SIZE(sh7722_early_devices));
+}
+
enum {
UNUSED=0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a800466..dbb4494 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -280,6 +280,16 @@
}
__initcall(sh7723_devices_setup);
+static struct platform_device *sh7723_early_devices[] __initdata = {
+ &cmt_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7723_early_devices,
+ ARRAY_SIZE(sh7723_early_devices));
+}
+
enum {
UNUSED=0,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
new file mode 100644
index 0000000..8429396
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -0,0 +1,556 @@
+/*
+ * SH7724 Setup
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Setup
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+
+/* Serial */
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ }, {
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ }, {
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ }, {
+ .mapbase = 0xa4e30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 56, 56, 56, 56 },
+ }, {
+ .mapbase = 0xa4e40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 88, 88, 88, 88 },
+ }, {
+ .mapbase = 0xa4e50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 109, 109, 109, 109 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+/* RTC */
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xa465fec0,
+ .end = 0xa465fec0 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 69,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 70,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 68,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+/* I2C0 */
+static struct resource iic0_resources[] = {
+ [0] = {
+ .name = "IIC0",
+ .start = 0x04470000,
+ .end = 0x04470018 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 96,
+ .end = 99,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic0_device = {
+ .name = "i2c-sh_mobile",
+ .id = 0, /* "i2c0" clock */
+ .num_resources = ARRAY_SIZE(iic0_resources),
+ .resource = iic0_resources,
+};
+
+/* I2C1 */
+static struct resource iic1_resources[] = {
+ [0] = {
+ .name = "IIC1",
+ .start = 0x04750000,
+ .end = 0x04750018 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 92,
+ .end = 95,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic1_device = {
+ .name = "i2c-sh_mobile",
+ .id = 1, /* "i2c1" clock */
+ .num_resources = ARRAY_SIZE(iic1_resources),
+ .resource = iic1_resources,
+};
+
+/* VPU */
+static struct uio_info vpu_platform_data = {
+ .name = "VPU5F",
+ .version = "0",
+ .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+ [0] = {
+ .name = "VPU",
+ .start = 0xfe900000,
+ .end = 0xfe902807,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device vpu_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 0,
+ .dev = {
+ .platform_data = &vpu_platform_data,
+ },
+ .resource = vpu_resources,
+ .num_resources = ARRAY_SIZE(vpu_resources),
+};
+
+/* VEU0 */
+static struct uio_info veu0_platform_data = {
+ .name = "VEU3F0",
+ .version = "0",
+ .irq = 83,
+};
+
+static struct resource veu0_resources[] = {
+ [0] = {
+ .name = "VEU3F0",
+ .start = 0xfe920000,
+ .end = 0xfe9200cb - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device veu0_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 1,
+ .dev = {
+ .platform_data = &veu0_platform_data,
+ },
+ .resource = veu0_resources,
+ .num_resources = ARRAY_SIZE(veu0_resources),
+};
+
+/* VEU1 */
+static struct uio_info veu1_platform_data = {
+ .name = "VEU3F1",
+ .version = "0",
+ .irq = 54,
+};
+
+static struct resource veu1_resources[] = {
+ [0] = {
+ .name = "VEU3F1",
+ .start = 0xfe924000,
+ .end = 0xfe9240cb - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device veu1_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 2,
+ .dev = {
+ .platform_data = &veu1_platform_data,
+ },
+ .resource = veu1_resources,
+ .num_resources = ARRAY_SIZE(veu1_resources),
+};
+
+static struct sh_cmt_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
+static struct platform_device *sh7724_devices[] __initdata = {
+ &cmt_device,
+ &sci_device,
+ &rtc_device,
+ &iic0_device,
+ &iic1_device,
+ &vpu_device,
+ &veu0_device,
+ &veu1_device,
+};
+
+static int __init sh7724_devices_setup(void)
+{
+ clk_always_enable("vpu0"); /* VPU */
+ clk_always_enable("veu1"); /* VEU3F1 */
+ clk_always_enable("veu0"); /* VEU3F0 */
+
+ platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+ platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+ platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
+ return platform_add_devices(sh7724_devices,
+ ARRAY_SIZE(sh7724_devices));
+}
+device_initcall(sh7724_devices_setup);
+
+static struct platform_device *sh7724_early_devices[] __initdata = {
+ &cmt_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7724_early_devices,
+ ARRAY_SIZE(sh7724_early_devices));
+}
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ HUDI,
+ DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
+ _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK,
+ DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
+ VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI,
+ SCIFA_SCIFA0,
+ VPU_VPUI,
+ TPU_TPUI,
+ CEU21I,
+ BEU21I,
+ USB_USI0,
+ ATAPI,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
+ DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
+ KEYSC_KEYI,
+ SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
+ VEU3F0I,
+ MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+ SPU_SPUI0, SPU_SPUI1,
+ SCIFA_SCIFA1,
+/* ICB_ICBI, */
+ ETHI,
+ I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+ I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+ SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2,
+ CMT_CMTI,
+ TSIF_TSIFI,
+/* ICB_LMBI, */
+ FSI_FSI,
+ SCIFA_SCIFA2,
+ TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+ IRDA_IRDAI,
+ SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2,
+ JPU_JPUI,
+ MMC_MMCI0, MMC_MMCI1, MMC_MMCI2,
+ LCDC_LCDCI,
+ TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+
+ /* interrupt groups */
+ DMAC1A, _2DG, DMAC0A, VIO, RTC,
+ DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+ INTC_VECT(DMAC1A_DEI0, 0x700),
+ INTC_VECT(DMAC1A_DEI1, 0x720),
+ INTC_VECT(DMAC1A_DEI2, 0x740),
+ INTC_VECT(DMAC1A_DEI3, 0x760),
+
+ INTC_VECT(_2DG_TRI, 0x780),
+ INTC_VECT(_2DG_INI, 0x7A0),
+ INTC_VECT(_2DG_CEI, 0x7C0),
+ INTC_VECT(_2DG_BRK, 0x7E0),
+
+ INTC_VECT(DMAC0A_DEI0, 0x800),
+ INTC_VECT(DMAC0A_DEI1, 0x820),
+ INTC_VECT(DMAC0A_DEI2, 0x840),
+ INTC_VECT(DMAC0A_DEI3, 0x860),
+
+ INTC_VECT(VIO_CEU20I, 0x880),
+ INTC_VECT(VIO_BEU20I, 0x8A0),
+ INTC_VECT(VIO_VEU3F1, 0x8C0),
+ INTC_VECT(VIO_VOUI, 0x8E0),
+
+ INTC_VECT(SCIFA_SCIFA0, 0x900),
+ INTC_VECT(VPU_VPUI, 0x980),
+ INTC_VECT(TPU_TPUI, 0x9A0),
+ INTC_VECT(CEU21I, 0x9E0),
+ INTC_VECT(BEU21I, 0xA00),
+ INTC_VECT(USB_USI0, 0xA20),
+ INTC_VECT(ATAPI, 0xA60),
+
+ INTC_VECT(RTC_ATI, 0xA80),
+ INTC_VECT(RTC_PRI, 0xAA0),
+ INTC_VECT(RTC_CUI, 0xAC0),
+
+ INTC_VECT(DMAC1B_DEI4, 0xB00),
+ INTC_VECT(DMAC1B_DEI5, 0xB20),
+ INTC_VECT(DMAC1B_DADERR, 0xB40),
+
+ INTC_VECT(DMAC0B_DEI4, 0xB80),
+ INTC_VECT(DMAC0B_DEI5, 0xBA0),
+ INTC_VECT(DMAC0B_DADERR, 0xBC0),
+
+ INTC_VECT(KEYSC_KEYI, 0xBE0),
+ INTC_VECT(SCIF_SCIF0, 0xC00),
+ INTC_VECT(SCIF_SCIF1, 0xC20),
+ INTC_VECT(SCIF_SCIF2, 0xC40),
+ INTC_VECT(VEU3F0I, 0xC60),
+ INTC_VECT(MSIOF_MSIOFI0, 0xC80),
+ INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
+ INTC_VECT(SPU_SPUI0, 0xCC0),
+ INTC_VECT(SPU_SPUI1, 0xCE0),
+ INTC_VECT(SCIFA_SCIFA1, 0xD00),
+
+/* INTC_VECT(ICB_ICBI, 0xD20), */
+ INTC_VECT(ETHI, 0xD60),
+
+ INTC_VECT(I2C1_ALI, 0xD80),
+ INTC_VECT(I2C1_TACKI, 0xDA0),
+ INTC_VECT(I2C1_WAITI, 0xDC0),
+ INTC_VECT(I2C1_DTEI, 0xDE0),
+
+ INTC_VECT(I2C0_ALI, 0xE00),
+ INTC_VECT(I2C0_TACKI, 0xE20),
+ INTC_VECT(I2C0_WAITI, 0xE40),
+ INTC_VECT(I2C0_DTEI, 0xE60),
+
+ INTC_VECT(SDHI0_SDHII0, 0xE80),
+ INTC_VECT(SDHI0_SDHII1, 0xEA0),
+ INTC_VECT(SDHI0_SDHII2, 0xEC0),
+
+ INTC_VECT(CMT_CMTI, 0xF00),
+ INTC_VECT(TSIF_TSIFI, 0xF20),
+/* INTC_VECT(ICB_LMBI, 0xF60), */
+ INTC_VECT(FSI_FSI, 0xF80),
+ INTC_VECT(SCIFA_SCIFA2, 0xFA0),
+
+ INTC_VECT(TMU0_TUNI0, 0x400),
+ INTC_VECT(TMU0_TUNI1, 0x420),
+ INTC_VECT(TMU0_TUNI2, 0x440),
+
+ INTC_VECT(IRDA_IRDAI, 0x480),
+
+ INTC_VECT(SDHI1_SDHII0, 0x4E0),
+ INTC_VECT(SDHI1_SDHII1, 0x500),
+ INTC_VECT(SDHI1_SDHII2, 0x520),
+
+ INTC_VECT(JPU_JPUI, 0x560),
+
+ INTC_VECT(MMC_MMCI0, 0x580),
+ INTC_VECT(MMC_MMCI1, 0x5A0),
+ INTC_VECT(MMC_MMCI2, 0x5C0),
+
+ INTC_VECT(LCDC_LCDCI, 0xF40),
+
+ INTC_VECT(TMU1_TUNI0, 0x920),
+ INTC_VECT(TMU1_TUNI1, 0x940),
+ INTC_VECT(TMU1_TUNI2, 0x960),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
+ INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK),
+ INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
+ INTC_GROUP(VIO, VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI),
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
+ INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
+ INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+ INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+ INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2),
+ INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2),
+ INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
+ INTC_GROUP(MMC, MMC_MMCI0, MMC_MMCI1, MMC_MMCI2),
+};
+
+/* FIXMEEEEEEEEEEEEEEEEEEE !!!!! */
+/* very bad manual !! */
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+ { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+ /*SDHII3?*/0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } },
+ { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+ { VIO_VOUI, VIO_VEU3F1, VIO_BEU20I, VIO_CEU20I,
+ DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
+ { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+ { 0, 0, 0, VPU_VPUI, ATAPI, ETHI, 0, /*SCIFA3*/SCIFA_SCIFA0 } },
+ { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+ { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
+ SPU_SPUI1, SPU_SPUI0, BEU21I, IRDA_IRDAI } },
+ { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+ { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
+ JPU_JPUI, 0, 0, LCDC_LCDCI } },
+ { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+ { KEYSC_KEYI, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
+ VEU3F0I, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
+ { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+ { 0, 0, /*ICB_ICBI*/0, /*SCIFA4*/SCIFA_SCIFA1,
+ CEU21I, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
+ { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+ { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+ I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
+ { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+ { /*SDHII3*/0, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0,
+ 0, 0, /*SCIFA5*/SCIFA_SCIFA2, FSI_FSI } },
+ { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+ { 0, 0, 0, CMT_CMTI, 0, /*USB1*/0, USB_USI0, 0 } },
+ { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+ { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
+ 0, RTC_ATI, RTC_PRI, RTC_CUI } },
+ { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+ { _2DG_BRK, _2DG_CEI, _2DG_INI, _2DG_TRI,
+ 0, TPU_TPUI, /*ICB_LMBI*/0, TSIF_TSIFI } },
+ { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+ { 0, 0, 0, 0, 0, 0, 0, 0/*2DDMAC*/ } },
+ { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
+ TMU0_TUNI2, IRDA_IRDAI } },
+ { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU_JPUI, LCDC_LCDCI,
+ DMAC1A, BEU21I } },
+ { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
+ TMU1_TUNI2, SPU } },
+ { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMC, 0, ATAPI } },
+ { 0xa4080010, 0, 16, 4, /* IPRE */
+ { DMAC0A, /*BEU?VEU?*/VIO, /*SCIFA3*/SCIFA_SCIFA0, /*VPU5F*/
+ VPU_VPUI } },
+ { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B,
+ USB_USI0, CMT_CMTI } },
+ { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
+ SCIF_SCIF2, VEU3F0I } },
+ { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+ I2C1, I2C0 } },
+ { 0xa4080020, 0, 16, 4, /* IPRI */ { /*SCIFA4*/SCIFA_SCIFA1, /*ICB*/0,
+ TSIF_TSIFI, _2DG/*ICB?*/ } },
+ { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU21I, ETHI, FSI_FSI, SDHI1 } },
+ { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, /*ICB?*/0, SDHI0 } },
+ { 0xa408002c, 0, 16, 4, /* IPRL */ { /*SCIFA5*/SCIFA_SCIFA2, 0,
+ TPU_TPUI, /*2DDMAC*/0 } },
+ { 0xa4140010, 0, 32, 4, /* INTPRI00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xa414001c, 16, 2, /* ICR1 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+ { 0xa4140024, 0, 8, /* INTREQ00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups,
+ mask_registers, prio_registers, sense_registers,
+ ack_registers);
+
+void __init plat_irq_setup(void)
+{
+ register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index 29cf458..4f85fff 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -12,6 +12,7 @@
* for more details.
*/
#include <linux/module.h>
+#include <linux/pci.h>
#include <asm/machvec.h>
#include <asm/io.h>
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 04a6004..38515a7 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -29,6 +29,7 @@
#include <linux/mmzone.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -328,6 +329,10 @@
early_param("elfcorehdr", parse_elfcorehdr);
#endif
+void __init __attribute__ ((weak)) plat_early_device_setup(void)
+{
+}
+
void __init setup_arch(char **cmdline_p)
{
enable_mmu();
@@ -381,6 +386,8 @@
parse_early_param();
+ plat_early_device_setup();
+
sh_mv_setup();
/*
@@ -435,7 +442,8 @@
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
- [CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
+ [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
+ [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 1700d24..c770413 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <linux/clockchips.h>
#include <linux/mc146818rtc.h> /* for rtc_lock */
+#include <linux/platform_device.h>
#include <linux/smp.h>
#include <asm/clock.h>
#include <asm/rtc.h>
@@ -229,6 +230,14 @@
#endif
/*
+ * Make sure all compiled-in early timers register themselves.
+ * Run probe() for one "earlytimer" device.
+ */
+ early_platform_driver_register_all("earlytimer");
+ if (early_platform_driver_probe("earlytimer", 1, 0))
+ return;
+
+ /*
* Find the timer to use as the system timer, it will be
* initialized for us.
*/
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index 60cc486..da2f418 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -46,17 +46,15 @@
return NULL;
/*
- * If we're on an SH7751 or SH7780 PCI controller, PCI memory is
- * mapped at the end of the address space (typically 0xfd000000)
- * in a non-translatable area, so mapping through page tables for
- * this area is not only pointless, but also fundamentally
- * broken. Just return the physical address instead.
+ * If we're in the fixed PCI memory range, mapping through page
+ * tables is not only pointless, but also fundamentally broken.
+ * Just return the physical address instead.
*
* For boards that map a small PCI memory aperture somewhere in
* P1/P2 space, ioremap() will already do the right thing,
* and we'll never get this far.
*/
- if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
+ if (is_pci_memory_fixed_range(phys_addr, size))
return (void __iomem *)phys_addr;
#if !defined(CONFIG_PMB_FIXED)
@@ -121,7 +119,9 @@
unsigned long seg = PXSEG(vaddr);
struct vm_struct *p;
- if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
+ if (seg < P3SEG || vaddr >= P3_ADDR_MAX)
+ return;
+ if (is_pci_memory_fixed_range(vaddr, 0))
return;
#ifdef CONFIG_PMB
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index 1b9d430..44f4e31 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -109,6 +109,7 @@
case CPU_SH7785:
case CPU_SH7786:
case CPU_SH7723:
+ case CPU_SH7724:
case CPU_SHX3:
lmodel = &op_model_sh4a_ops;
break;
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index 1c92c39..c247564 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -47,6 +47,7 @@
unsigned long rate;
spinlock_t lock;
struct clock_event_device ced;
+ struct clocksource cs;
unsigned long total_cycles;
};
@@ -376,6 +377,68 @@
spin_unlock_irqrestore(&p->lock, flags);
}
+static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
+{
+ return container_of(cs, struct sh_cmt_priv, cs);
+}
+
+static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
+{
+ struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+ unsigned long flags, raw;
+ unsigned long value;
+ int has_wrapped;
+
+ spin_lock_irqsave(&p->lock, flags);
+ value = p->total_cycles;
+ raw = sh_cmt_get_counter(p, &has_wrapped);
+
+ if (unlikely(has_wrapped))
+ raw = p->match_value;
+ spin_unlock_irqrestore(&p->lock, flags);
+
+ return value + raw;
+}
+
+static int sh_cmt_clocksource_enable(struct clocksource *cs)
+{
+ struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+ int ret;
+
+ p->total_cycles = 0;
+
+ ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
+ if (ret)
+ return ret;
+
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 0;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+ return 0;
+}
+
+static void sh_cmt_clocksource_disable(struct clocksource *cs)
+{
+ sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE);
+}
+
+static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clocksource *cs = &p->cs;
+
+ cs->name = name;
+ cs->rating = rating;
+ cs->read = sh_cmt_clocksource_read;
+ cs->enable = sh_cmt_clocksource_enable;
+ cs->disable = sh_cmt_clocksource_disable;
+ cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ pr_info("sh_cmt: %s used as clock source\n", cs->name);
+ clocksource_register(cs);
+ return 0;
+}
+
static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced)
{
return container_of(ced, struct sh_cmt_priv, ced);
@@ -483,6 +546,9 @@
if (clockevent_rating)
sh_cmt_register_clockevent(p, name, clockevent_rating);
+ if (clocksource_rating)
+ sh_cmt_register_clocksource(p, name, clocksource_rating);
+
return 0;
}
@@ -566,9 +632,19 @@
static int __devinit sh_cmt_probe(struct platform_device *pdev)
{
struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+ struct sh_cmt_config *cfg = pdev->dev.platform_data;
int ret;
- p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p) {
+ pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name);
+ return 0;
+ }
+
+ if (is_early_platform_device(pdev))
+ p = alloc_bootmem(sizeof(*p));
+ else
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+
if (p == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
return -ENOMEM;
@@ -576,7 +652,10 @@
ret = sh_cmt_setup(p, pdev);
if (ret) {
- kfree(p);
+ if (is_early_platform_device(pdev))
+ free_bootmem(__pa(p), sizeof(*p));
+ else
+ kfree(p);
platform_set_drvdata(pdev, NULL);
}
@@ -606,6 +685,7 @@
platform_driver_unregister(&sh_cmt_device_driver);
}
+early_platform_init("earlytimer", &sh_cmt_device_driver);
module_init(sh_cmt_init);
module_exit(sh_cmt_exit);
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d0aa82d..84cc651 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -91,6 +91,9 @@
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
@@ -361,7 +364,8 @@
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
@@ -390,7 +394,8 @@
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
@@ -604,6 +609,17 @@
return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCFSR 0x0010
+# define SCASSR 0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->type == PORT_SCIF)
+ return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
+ if (port->type == PORT_SCIFA)
+ return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
@@ -757,7 +773,8 @@
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
if (port->type == PORT_SCIF)