| /* |
| ivtv driver initialization and card probing |
| Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com> |
| Copyright (C) 2004 Chris Kennedy <c@groovy.org> |
| Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* Main Driver file for the ivtv project: |
| * Driver for the Conexant CX23415/CX23416 chip. |
| * Author: Kevin Thayer (nufan_wfk at yahoo.com) |
| * License: GPL |
| * http://www.ivtvdriver.org |
| * |
| * ----- |
| * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com> |
| * and Takeru KOMORIYA<komoriya@paken.org> |
| * |
| * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org> |
| * using information provided by Jiun-Kuei Jung @ AVerMedia. |
| * |
| * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp> |
| * using information from T.Adachi,Takeru KOMORIYA and others :-) |
| * |
| * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX |
| * version by T.Adachi. Special thanks Mr.Suzuki |
| */ |
| |
| #include "ivtv-driver.h" |
| #include "ivtv-version.h" |
| #include "ivtv-fileops.h" |
| #include "ivtv-i2c.h" |
| #include "ivtv-firmware.h" |
| #include "ivtv-queue.h" |
| #include "ivtv-udma.h" |
| #include "ivtv-irq.h" |
| #include "ivtv-mailbox.h" |
| #include "ivtv-streams.h" |
| #include "ivtv-ioctl.h" |
| #include "ivtv-cards.h" |
| #include "ivtv-vbi.h" |
| #include "ivtv-routing.h" |
| #include "ivtv-controls.h" |
| #include "ivtv-gpio.h" |
| #include <linux/dma-mapping.h> |
| #include <media/tveeprom.h> |
| #include <media/saa7115.h> |
| #include <media/v4l2-chip-ident.h> |
| #include "tuner-xc2028.h" |
| |
| /* If you have already X v4l cards, then set this to X. This way |
| the device numbers stay matched. Example: you have a WinTV card |
| without radio and a PVR-350 with. Normally this would give a |
| video1 device together with a radio0 device for the PVR. By |
| setting this to 1 you ensure that radio0 is now also radio1. */ |
| int ivtv_first_minor; |
| |
| /* Callback for registering extensions */ |
| int (*ivtv_ext_init)(struct ivtv *); |
| EXPORT_SYMBOL(ivtv_ext_init); |
| |
| /* add your revision and whatnot here */ |
| static struct pci_device_id ivtv_pci_tbl[] = { |
| {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV15, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {PCI_VENDOR_ID_ICOMP, PCI_DEVICE_ID_IVTV16, |
| PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci,ivtv_pci_tbl); |
| |
| /* ivtv instance counter */ |
| static atomic_t ivtv_instance = ATOMIC_INIT(0); |
| |
| /* Parameter declarations */ |
| static int cardtype[IVTV_MAX_CARDS]; |
| static int tuner[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1 }; |
| static int radio[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1 }; |
| static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, -1, -1, -1, -1, -1 }; |
| |
| static unsigned int cardtype_c = 1; |
| static unsigned int tuner_c = 1; |
| static int radio_c = 1; |
| static unsigned int i2c_clock_period_c = 1; |
| static char pal[] = "---"; |
| static char secam[] = "--"; |
| static char ntsc[] = "-"; |
| |
| /* Buffers */ |
| |
| /* DMA Buffers, Default size in MB allocated */ |
| #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4 |
| #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2 |
| #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1 |
| /* Exception: size in kB for this stream (MB is overkill) */ |
| #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320 |
| #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1 |
| #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1 |
| /* Exception: size in kB for this stream (MB is way overkill) */ |
| #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64 |
| |
| static int enc_mpg_buffers = IVTV_DEFAULT_ENC_MPG_BUFFERS; |
| static int enc_yuv_buffers = IVTV_DEFAULT_ENC_YUV_BUFFERS; |
| static int enc_vbi_buffers = IVTV_DEFAULT_ENC_VBI_BUFFERS; |
| static int enc_pcm_buffers = IVTV_DEFAULT_ENC_PCM_BUFFERS; |
| static int dec_mpg_buffers = IVTV_DEFAULT_DEC_MPG_BUFFERS; |
| static int dec_yuv_buffers = IVTV_DEFAULT_DEC_YUV_BUFFERS; |
| static int dec_vbi_buffers = IVTV_DEFAULT_DEC_VBI_BUFFERS; |
| |
| static int ivtv_yuv_mode; |
| static int ivtv_yuv_threshold = -1; |
| static int ivtv_pci_latency = 1; |
| |
| int ivtv_debug; |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| int ivtv_fw_debug; |
| #endif |
| |
| static int tunertype = -1; |
| static int newi2c = -1; |
| |
| module_param_array(tuner, int, &tuner_c, 0644); |
| module_param_array(radio, int, &radio_c, 0644); |
| module_param_array(cardtype, int, &cardtype_c, 0644); |
| module_param_string(pal, pal, sizeof(pal), 0644); |
| module_param_string(secam, secam, sizeof(secam), 0644); |
| module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); |
| module_param_named(debug,ivtv_debug, int, 0644); |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| module_param_named(fw_debug, ivtv_fw_debug, int, 0644); |
| #endif |
| module_param(ivtv_pci_latency, int, 0644); |
| module_param(ivtv_yuv_mode, int, 0644); |
| module_param(ivtv_yuv_threshold, int, 0644); |
| module_param(ivtv_first_minor, int, 0644); |
| |
| module_param(enc_mpg_buffers, int, 0644); |
| module_param(enc_yuv_buffers, int, 0644); |
| module_param(enc_vbi_buffers, int, 0644); |
| module_param(enc_pcm_buffers, int, 0644); |
| module_param(dec_mpg_buffers, int, 0644); |
| module_param(dec_yuv_buffers, int, 0644); |
| module_param(dec_vbi_buffers, int, 0644); |
| |
| module_param(tunertype, int, 0644); |
| module_param(newi2c, int, 0644); |
| module_param_array(i2c_clock_period, int, &i2c_clock_period_c, 0644); |
| |
| MODULE_PARM_DESC(tuner, "Tuner type selection,\n" |
| "\t\t\tsee tuner.h for values"); |
| MODULE_PARM_DESC(radio, |
| "Enable or disable the radio. Use only if autodetection\n" |
| "\t\t\tfails. 0 = disable, 1 = enable"); |
| MODULE_PARM_DESC(cardtype, |
| "Only use this option if your card is not detected properly.\n" |
| "\t\tSpecify card type:\n" |
| "\t\t\t 1 = WinTV PVR 250\n" |
| "\t\t\t 2 = WinTV PVR 350\n" |
| "\t\t\t 3 = WinTV PVR-150 or PVR-500\n" |
| "\t\t\t 4 = AVerMedia M179\n" |
| "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n" |
| "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n" |
| "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n" |
| "\t\t\t 8 = Adaptec AVC-2410\n" |
| "\t\t\t 9 = Adaptec AVC-2010\n" |
| "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n" |
| "\t\t\t11 = AOpen VA2000MAX-STN6\n" |
| "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n" |
| "\t\t\t13 = I/O Data GV-MVP/RX\n" |
| "\t\t\t14 = I/O Data GV-MVP/RX2E\n" |
| "\t\t\t15 = GOTVIEW PCI DVD\n" |
| "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n" |
| "\t\t\t17 = Yuan MPC622\n" |
| "\t\t\t18 = Digital Cowboy DCT-MTVP1\n" |
| "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n" |
| "\t\t\t20 = Club3D ZAP-TV1x01\n" |
| "\t\t\t21 = AverTV MCE 116 Plus\n" |
| "\t\t\t22 = ASUS Falcon2\n" |
| "\t\t\t23 = AverMedia PVR-150 Plus\n" |
| "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n" |
| "\t\t\t25 = AverMedia M104 (not yet working)\n" |
| "\t\t\t26 = Buffalo PC-MV5L/PCI\n" |
| "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n" |
| "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n" |
| "\t\t\t 0 = Autodetect (default)\n" |
| "\t\t\t-1 = Ignore this card\n\t\t"); |
| MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60"); |
| MODULE_PARM_DESC(secam, "Set SECAM standard: BGH, DK, L, LC"); |
| MODULE_PARM_DESC(ntsc, "Set NTSC standard: M, J (Japan), K (South Korea)"); |
| MODULE_PARM_DESC(tunertype, |
| "Specify tuner type:\n" |
| "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n" |
| "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n" |
| "\t\t\t-1 = Autodetect (default)\n"); |
| MODULE_PARM_DESC(debug, |
| "Debug level (bitmask). Default: 0\n" |
| "\t\t\t 1/0x0001: warning\n" |
| "\t\t\t 2/0x0002: info\n" |
| "\t\t\t 4/0x0004: mailbox\n" |
| "\t\t\t 8/0x0008: ioctl\n" |
| "\t\t\t 16/0x0010: file\n" |
| "\t\t\t 32/0x0020: dma\n" |
| "\t\t\t 64/0x0040: irq\n" |
| "\t\t\t 128/0x0080: decoder\n" |
| "\t\t\t 256/0x0100: yuv\n" |
| "\t\t\t 512/0x0200: i2c\n" |
| "\t\t\t1024/0x0400: high volume\n"); |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| MODULE_PARM_DESC(fw_debug, |
| "Enable code for debugging firmware problems. Default: 0\n"); |
| #endif |
| MODULE_PARM_DESC(ivtv_pci_latency, |
| "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n" |
| "\t\t\tDefault: Yes"); |
| MODULE_PARM_DESC(ivtv_yuv_mode, |
| "Specify the yuv playback mode:\n" |
| "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n" |
| "\t\t\tDefault: 0 (interlaced)"); |
| MODULE_PARM_DESC(ivtv_yuv_threshold, |
| "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n" |
| "\t\t\tDefault: 480"); |
| MODULE_PARM_DESC(enc_mpg_buffers, |
| "Encoder MPG Buffers (in MB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS)); |
| MODULE_PARM_DESC(enc_yuv_buffers, |
| "Encoder YUV Buffers (in MB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS)); |
| MODULE_PARM_DESC(enc_vbi_buffers, |
| "Encoder VBI Buffers (in MB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS)); |
| MODULE_PARM_DESC(enc_pcm_buffers, |
| "Encoder PCM buffers (in kB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS)); |
| MODULE_PARM_DESC(dec_mpg_buffers, |
| "Decoder MPG buffers (in MB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS)); |
| MODULE_PARM_DESC(dec_yuv_buffers, |
| "Decoder YUV buffers (in MB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS)); |
| MODULE_PARM_DESC(dec_vbi_buffers, |
| "Decoder VBI buffers (in kB)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS)); |
| MODULE_PARM_DESC(newi2c, |
| "Use new I2C implementation\n" |
| "\t\t\t-1 is autodetect, 0 is off, 1 is on\n" |
| "\t\t\tDefault is autodetect"); |
| MODULE_PARM_DESC(i2c_clock_period, |
| "Period of SCL for the I2C bus controlled by the CX23415/6\n" |
| "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n" |
| "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD)); |
| |
| MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card"); |
| |
| MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); |
| MODULE_DESCRIPTION("CX23415/CX23416 driver"); |
| MODULE_SUPPORTED_DEVICE |
| ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n" |
| "\t\t\tYuan MPG series and similar)"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_VERSION(IVTV_VERSION); |
| |
| #if defined(CONFIG_MODULES) && defined(MODULE) |
| static void request_module_async(struct work_struct *work) |
| { |
| struct ivtv *dev = container_of(work, struct ivtv, request_module_wk); |
| |
| /* Make sure ivtv-alsa module is loaded */ |
| request_module("ivtv-alsa"); |
| |
| /* Initialize ivtv-alsa for this instance of the cx18 device */ |
| if (ivtv_ext_init != NULL) |
| ivtv_ext_init(dev); |
| } |
| |
| static void request_modules(struct ivtv *dev) |
| { |
| INIT_WORK(&dev->request_module_wk, request_module_async); |
| schedule_work(&dev->request_module_wk); |
| } |
| |
| static void flush_request_modules(struct ivtv *dev) |
| { |
| flush_work_sync(&dev->request_module_wk); |
| } |
| #else |
| #define request_modules(dev) |
| #define flush_request_modules(dev) |
| #endif /* CONFIG_MODULES */ |
| |
| void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask) |
| { |
| itv->irqmask &= ~mask; |
| write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK); |
| } |
| |
| void ivtv_set_irq_mask(struct ivtv *itv, u32 mask) |
| { |
| itv->irqmask |= mask; |
| write_reg_sync(itv->irqmask, IVTV_REG_IRQMASK); |
| } |
| |
| int ivtv_set_output_mode(struct ivtv *itv, int mode) |
| { |
| int old_mode; |
| |
| spin_lock(&itv->lock); |
| old_mode = itv->output_mode; |
| if (old_mode == 0) |
| itv->output_mode = old_mode = mode; |
| spin_unlock(&itv->lock); |
| return old_mode; |
| } |
| |
| struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv) |
| { |
| switch (itv->output_mode) { |
| case OUT_MPG: |
| return &itv->streams[IVTV_DEC_STREAM_TYPE_MPG]; |
| case OUT_YUV: |
| return &itv->streams[IVTV_DEC_STREAM_TYPE_YUV]; |
| default: |
| return NULL; |
| } |
| } |
| |
| int ivtv_waitq(wait_queue_head_t *waitq) |
| { |
| DEFINE_WAIT(wait); |
| |
| prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE); |
| schedule(); |
| finish_wait(waitq, &wait); |
| return signal_pending(current) ? -EINTR : 0; |
| } |
| |
| /* Generic utility functions */ |
| int ivtv_msleep_timeout(unsigned int msecs, int intr) |
| { |
| int timeout = msecs_to_jiffies(msecs); |
| |
| do { |
| set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); |
| timeout = schedule_timeout(timeout); |
| if (intr) { |
| int ret = signal_pending(current); |
| |
| if (ret) |
| return ret; |
| } |
| } while (timeout); |
| return 0; |
| } |
| |
| /* Release ioremapped memory */ |
| static void ivtv_iounmap(struct ivtv *itv) |
| { |
| if (itv == NULL) |
| return; |
| |
| /* Release registers memory */ |
| if (itv->reg_mem != NULL) { |
| IVTV_DEBUG_INFO("releasing reg_mem\n"); |
| iounmap(itv->reg_mem); |
| itv->reg_mem = NULL; |
| } |
| /* Release io memory */ |
| if (itv->has_cx23415 && itv->dec_mem != NULL) { |
| IVTV_DEBUG_INFO("releasing dec_mem\n"); |
| iounmap(itv->dec_mem); |
| } |
| itv->dec_mem = NULL; |
| |
| /* Release io memory */ |
| if (itv->enc_mem != NULL) { |
| IVTV_DEBUG_INFO("releasing enc_mem\n"); |
| iounmap(itv->enc_mem); |
| itv->enc_mem = NULL; |
| } |
| } |
| |
| /* Hauppauge card? get values from tveeprom */ |
| void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv) |
| { |
| u8 eedata[256]; |
| |
| itv->i2c_client.addr = 0xA0 >> 1; |
| tveeprom_read(&itv->i2c_client, eedata, sizeof(eedata)); |
| tveeprom_hauppauge_analog(&itv->i2c_client, tv, eedata); |
| } |
| |
| static void ivtv_process_eeprom(struct ivtv *itv) |
| { |
| struct tveeprom tv; |
| int pci_slot = PCI_SLOT(itv->pdev->devfn); |
| |
| ivtv_read_eeprom(itv, &tv); |
| |
| /* Many thanks to Steven Toth from Hauppauge for providing the |
| model numbers */ |
| switch (tv.model) { |
| /* In a few cases the PCI subsystem IDs do not correctly |
| identify the card. A better method is to check the |
| model number from the eeprom instead. */ |
| case 30012 ... 30039: /* Low profile PVR250 */ |
| case 32000 ... 32999: |
| case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */ |
| case 48400 ... 48599: |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_250); |
| break; |
| case 48100 ... 48399: |
| case 48600 ... 48999: |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_350); |
| break; |
| case 23000 ... 23999: /* PVR500 */ |
| case 25000 ... 25999: /* Low profile PVR150 */ |
| case 26000 ... 26999: /* Regular PVR150 */ |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_150); |
| break; |
| case 0: |
| IVTV_ERR("Invalid EEPROM\n"); |
| return; |
| default: |
| IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv.model); |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_150); |
| break; |
| } |
| |
| switch (tv.model) { |
| /* Old style PVR350 (with an saa7114) uses this input for |
| the tuner. */ |
| case 48254: |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_350_V1); |
| break; |
| default: |
| break; |
| } |
| |
| itv->v4l2_cap = itv->card->v4l2_capabilities; |
| itv->card_name = itv->card->name; |
| itv->card_i2c = itv->card->i2c; |
| |
| /* If this is a PVR500 then it should be possible to detect whether it is the |
| first or second unit by looking at the subsystem device ID: is bit 4 is |
| set, then it is the second unit (according to info from Hauppauge). |
| |
| However, while this works for most cards, I have seen a few PVR500 cards |
| where both units have the same subsystem ID. |
| |
| So instead I look at the reported 'PCI slot' (which is the slot on the PVR500 |
| PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise |
| it is the second unit. It is possible that it is a different slot when ivtv is |
| used in Xen, in that case I ignore this card here. The worst that can happen |
| is that the card presents itself with a non-working radio device. |
| |
| This detection is needed since the eeprom reports incorrectly that a radio is |
| present on the second unit. */ |
| if (tv.model / 1000 == 23) { |
| static const struct ivtv_card_tuner_i2c ivtv_i2c_radio = { |
| .radio = { 0x60, I2C_CLIENT_END }, |
| .demod = { 0x43, I2C_CLIENT_END }, |
| .tv = { 0x61, I2C_CLIENT_END }, |
| }; |
| |
| itv->card_name = "WinTV PVR 500"; |
| itv->card_i2c = &ivtv_i2c_radio; |
| if (pci_slot == 8 || pci_slot == 9) { |
| int is_first = (pci_slot & 1) == 0; |
| |
| itv->card_name = is_first ? "WinTV PVR 500 (unit #1)" : |
| "WinTV PVR 500 (unit #2)"; |
| if (!is_first) { |
| IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n"); |
| tv.has_radio = 0; |
| } |
| } |
| } |
| IVTV_INFO("Autodetected %s\n", itv->card_name); |
| |
| switch (tv.tuner_hauppauge_model) { |
| case 85: |
| case 99: |
| case 112: |
| itv->pvr150_workaround = 1; |
| break; |
| default: |
| break; |
| } |
| if (tv.tuner_type == TUNER_ABSENT) |
| IVTV_ERR("tveeprom cannot autodetect tuner!\n"); |
| |
| if (itv->options.tuner == -1) |
| itv->options.tuner = tv.tuner_type; |
| if (itv->options.radio == -1) |
| itv->options.radio = (tv.has_radio != 0); |
| /* only enable newi2c if an IR blaster is present */ |
| if (itv->options.newi2c == -1 && tv.has_ir) { |
| itv->options.newi2c = (tv.has_ir & 4) ? 1 : 0; |
| if (itv->options.newi2c) { |
| IVTV_INFO("Reopen i2c bus for IR-blaster support\n"); |
| exit_ivtv_i2c(itv); |
| init_ivtv_i2c(itv); |
| } |
| } |
| |
| if (itv->std != 0) |
| /* user specified tuner standard */ |
| return; |
| |
| /* autodetect tuner standard */ |
| if (tv.tuner_formats & V4L2_STD_PAL) { |
| IVTV_DEBUG_INFO("PAL tuner detected\n"); |
| itv->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H; |
| } else if (tv.tuner_formats & V4L2_STD_NTSC) { |
| IVTV_DEBUG_INFO("NTSC tuner detected\n"); |
| itv->std |= V4L2_STD_NTSC_M; |
| } else if (tv.tuner_formats & V4L2_STD_SECAM) { |
| IVTV_DEBUG_INFO("SECAM tuner detected\n"); |
| itv->std |= V4L2_STD_SECAM_L; |
| } else { |
| IVTV_INFO("No tuner detected, default to NTSC-M\n"); |
| itv->std |= V4L2_STD_NTSC_M; |
| } |
| } |
| |
| static v4l2_std_id ivtv_parse_std(struct ivtv *itv) |
| { |
| switch (pal[0]) { |
| case '6': |
| tunertype = 0; |
| return V4L2_STD_PAL_60; |
| case 'b': |
| case 'B': |
| case 'g': |
| case 'G': |
| case 'h': |
| case 'H': |
| tunertype = 0; |
| return V4L2_STD_PAL_BG | V4L2_STD_PAL_H; |
| case 'n': |
| case 'N': |
| tunertype = 1; |
| if (pal[1] == 'c' || pal[1] == 'C') |
| return V4L2_STD_PAL_Nc; |
| return V4L2_STD_PAL_N; |
| case 'i': |
| case 'I': |
| tunertype = 0; |
| return V4L2_STD_PAL_I; |
| case 'd': |
| case 'D': |
| case 'k': |
| case 'K': |
| tunertype = 0; |
| return V4L2_STD_PAL_DK; |
| case 'M': |
| case 'm': |
| tunertype = 1; |
| return V4L2_STD_PAL_M; |
| case '-': |
| break; |
| default: |
| IVTV_WARN("pal= argument not recognised\n"); |
| return 0; |
| } |
| |
| switch (secam[0]) { |
| case 'b': |
| case 'B': |
| case 'g': |
| case 'G': |
| case 'h': |
| case 'H': |
| tunertype = 0; |
| return V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; |
| case 'd': |
| case 'D': |
| case 'k': |
| case 'K': |
| tunertype = 0; |
| return V4L2_STD_SECAM_DK; |
| case 'l': |
| case 'L': |
| tunertype = 0; |
| if (secam[1] == 'C' || secam[1] == 'c') |
| return V4L2_STD_SECAM_LC; |
| return V4L2_STD_SECAM_L; |
| case '-': |
| break; |
| default: |
| IVTV_WARN("secam= argument not recognised\n"); |
| return 0; |
| } |
| |
| switch (ntsc[0]) { |
| case 'm': |
| case 'M': |
| tunertype = 1; |
| return V4L2_STD_NTSC_M; |
| case 'j': |
| case 'J': |
| tunertype = 1; |
| return V4L2_STD_NTSC_M_JP; |
| case 'k': |
| case 'K': |
| tunertype = 1; |
| return V4L2_STD_NTSC_M_KR; |
| case '-': |
| break; |
| default: |
| IVTV_WARN("ntsc= argument not recognised\n"); |
| return 0; |
| } |
| |
| /* no match found */ |
| return 0; |
| } |
| |
| static void ivtv_process_options(struct ivtv *itv) |
| { |
| const char *chipname; |
| int i, j; |
| |
| itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers * 1024; |
| itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers * 1024; |
| itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers * 1024; |
| itv->options.kilobytes[IVTV_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers; |
| itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_MPG] = dec_mpg_buffers * 1024; |
| itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_YUV] = dec_yuv_buffers * 1024; |
| itv->options.kilobytes[IVTV_DEC_STREAM_TYPE_VBI] = dec_vbi_buffers; |
| itv->options.cardtype = cardtype[itv->instance]; |
| itv->options.tuner = tuner[itv->instance]; |
| itv->options.radio = radio[itv->instance]; |
| |
| itv->options.i2c_clock_period = i2c_clock_period[itv->instance]; |
| if (itv->options.i2c_clock_period == -1) |
| itv->options.i2c_clock_period = IVTV_DEFAULT_I2C_CLOCK_PERIOD; |
| else if (itv->options.i2c_clock_period < 10) |
| itv->options.i2c_clock_period = 10; |
| else if (itv->options.i2c_clock_period > 4500) |
| itv->options.i2c_clock_period = 4500; |
| |
| itv->options.newi2c = newi2c; |
| if (tunertype < -1 || tunertype > 1) { |
| IVTV_WARN("Invalid tunertype argument, will autodetect instead\n"); |
| tunertype = -1; |
| } |
| itv->std = ivtv_parse_std(itv); |
| if (itv->std == 0 && tunertype >= 0) |
| itv->std = tunertype ? V4L2_STD_MN : (V4L2_STD_ALL & ~V4L2_STD_MN); |
| itv->has_cx23415 = (itv->pdev->device == PCI_DEVICE_ID_IVTV15); |
| chipname = itv->has_cx23415 ? "cx23415" : "cx23416"; |
| if (itv->options.cardtype == -1) { |
| IVTV_INFO("Ignore card (detected %s based chip)\n", chipname); |
| return; |
| } |
| if ((itv->card = ivtv_get_card(itv->options.cardtype - 1))) { |
| IVTV_INFO("User specified %s card (detected %s based chip)\n", |
| itv->card->name, chipname); |
| } else if (itv->options.cardtype != 0) { |
| IVTV_ERR("Unknown user specified type, trying to autodetect card\n"); |
| } |
| if (itv->card == NULL) { |
| if (itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE || |
| itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT1 || |
| itv->pdev->subsystem_vendor == IVTV_PCI_ID_HAUPPAUGE_ALT2) { |
| itv->card = ivtv_get_card(itv->has_cx23415 ? IVTV_CARD_PVR_350 : IVTV_CARD_PVR_150); |
| IVTV_INFO("Autodetected Hauppauge card (%s based)\n", |
| chipname); |
| } |
| } |
| if (itv->card == NULL) { |
| for (i = 0; (itv->card = ivtv_get_card(i)); i++) { |
| if (itv->card->pci_list == NULL) |
| continue; |
| for (j = 0; itv->card->pci_list[j].device; j++) { |
| if (itv->pdev->device != |
| itv->card->pci_list[j].device) |
| continue; |
| if (itv->pdev->subsystem_vendor != |
| itv->card->pci_list[j].subsystem_vendor) |
| continue; |
| if (itv->pdev->subsystem_device != |
| itv->card->pci_list[j].subsystem_device) |
| continue; |
| IVTV_INFO("Autodetected %s card (%s based)\n", |
| itv->card->name, chipname); |
| goto done; |
| } |
| } |
| } |
| done: |
| |
| if (itv->card == NULL) { |
| itv->card = ivtv_get_card(IVTV_CARD_PVR_150); |
| IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n", |
| itv->pdev->vendor, itv->pdev->device); |
| IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n", |
| itv->pdev->subsystem_vendor, itv->pdev->subsystem_device); |
| IVTV_ERR(" %s based\n", chipname); |
| IVTV_ERR("Defaulting to %s card\n", itv->card->name); |
| IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n"); |
| IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n"); |
| IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n"); |
| } |
| itv->v4l2_cap = itv->card->v4l2_capabilities; |
| itv->card_name = itv->card->name; |
| itv->card_i2c = itv->card->i2c; |
| } |
| |
| /* Precondition: the ivtv structure has been memset to 0. Only |
| the dev and num fields have been filled in. |
| No assumptions on the card type may be made here (see ivtv_init_struct2 |
| for that). |
| */ |
| static int ivtv_init_struct1(struct ivtv *itv) |
| { |
| struct sched_param param = { .sched_priority = 99 }; |
| |
| itv->base_addr = pci_resource_start(itv->pdev, 0); |
| itv->enc_mbox.max_mbox = 2; /* the encoder has 3 mailboxes (0-2) */ |
| itv->dec_mbox.max_mbox = 1; /* the decoder has 2 mailboxes (0-1) */ |
| |
| mutex_init(&itv->serialize_lock); |
| mutex_init(&itv->i2c_bus_lock); |
| mutex_init(&itv->udma.lock); |
| |
| spin_lock_init(&itv->lock); |
| spin_lock_init(&itv->dma_reg_lock); |
| |
| init_kthread_worker(&itv->irq_worker); |
| itv->irq_worker_task = kthread_run(kthread_worker_fn, &itv->irq_worker, |
| itv->v4l2_dev.name); |
| if (IS_ERR(itv->irq_worker_task)) { |
| IVTV_ERR("Could not create ivtv task\n"); |
| return -1; |
| } |
| /* must use the FIFO scheduler as it is realtime sensitive */ |
| sched_setscheduler(itv->irq_worker_task, SCHED_FIFO, ¶m); |
| |
| init_kthread_work(&itv->irq_work, ivtv_irq_work_handler); |
| |
| /* Initial settings */ |
| itv->cxhdl.port = CX2341X_PORT_MEMORY; |
| itv->cxhdl.capabilities = CX2341X_CAP_HAS_SLICED_VBI; |
| init_waitqueue_head(&itv->eos_waitq); |
| init_waitqueue_head(&itv->event_waitq); |
| init_waitqueue_head(&itv->vsync_waitq); |
| init_waitqueue_head(&itv->dma_waitq); |
| init_timer(&itv->dma_timer); |
| itv->dma_timer.function = ivtv_unfinished_dma; |
| itv->dma_timer.data = (unsigned long)itv; |
| |
| itv->cur_dma_stream = -1; |
| itv->cur_pio_stream = -1; |
| |
| /* Ctrls */ |
| itv->speed = 1000; |
| |
| /* VBI */ |
| itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE; |
| itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced; |
| |
| /* Init the sg table for osd/yuv output */ |
| sg_init_table(itv->udma.SGlist, IVTV_DMA_SG_OSD_ENT); |
| |
| /* OSD */ |
| itv->osd_global_alpha_state = 1; |
| itv->osd_global_alpha = 255; |
| |
| /* YUV */ |
| atomic_set(&itv->yuv_info.next_dma_frame, -1); |
| itv->yuv_info.lace_mode = ivtv_yuv_mode; |
| itv->yuv_info.lace_threshold = ivtv_yuv_threshold; |
| itv->yuv_info.max_frames_buffered = 3; |
| itv->yuv_info.track_osd = 1; |
| return 0; |
| } |
| |
| /* Second initialization part. Here the card type has been |
| autodetected. */ |
| static void ivtv_init_struct2(struct ivtv *itv) |
| { |
| int i; |
| |
| for (i = 0; i < IVTV_CARD_MAX_VIDEO_INPUTS; i++) |
| if (itv->card->video_inputs[i].video_type == 0) |
| break; |
| itv->nof_inputs = i; |
| for (i = 0; i < IVTV_CARD_MAX_AUDIO_INPUTS; i++) |
| if (itv->card->audio_inputs[i].audio_type == 0) |
| break; |
| itv->nof_audio_inputs = i; |
| |
| if (itv->card->hw_all & IVTV_HW_CX25840) { |
| itv->vbi.sliced_size = 288; /* multiple of 16, real size = 284 */ |
| } else { |
| itv->vbi.sliced_size = 64; /* multiple of 16, real size = 52 */ |
| } |
| |
| /* Find tuner input */ |
| for (i = 0; i < itv->nof_inputs; i++) { |
| if (itv->card->video_inputs[i].video_type == |
| IVTV_CARD_INPUT_VID_TUNER) |
| break; |
| } |
| if (i == itv->nof_inputs) |
| i = 0; |
| itv->active_input = i; |
| itv->audio_input = itv->card->video_inputs[i].audio_index; |
| } |
| |
| static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev, |
| const struct pci_device_id *pci_id) |
| { |
| u16 cmd; |
| unsigned char pci_latency; |
| |
| IVTV_DEBUG_INFO("Enabling pci device\n"); |
| |
| if (pci_enable_device(pdev)) { |
| IVTV_ERR("Can't enable device!\n"); |
| return -EIO; |
| } |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| IVTV_ERR("No suitable DMA available.\n"); |
| return -EIO; |
| } |
| if (!request_mem_region(itv->base_addr, IVTV_ENCODER_SIZE, "ivtv encoder")) { |
| IVTV_ERR("Cannot request encoder memory region.\n"); |
| return -EIO; |
| } |
| |
| if (!request_mem_region(itv->base_addr + IVTV_REG_OFFSET, |
| IVTV_REG_SIZE, "ivtv registers")) { |
| IVTV_ERR("Cannot request register memory region.\n"); |
| release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); |
| return -EIO; |
| } |
| |
| if (itv->has_cx23415 && |
| !request_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, |
| IVTV_DECODER_SIZE, "ivtv decoder")) { |
| IVTV_ERR("Cannot request decoder memory region.\n"); |
| release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); |
| release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); |
| return -EIO; |
| } |
| |
| /* Check for bus mastering */ |
| pci_read_config_word(pdev, PCI_COMMAND, &cmd); |
| if (!(cmd & PCI_COMMAND_MASTER)) { |
| IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n"); |
| pci_set_master(pdev); |
| pci_read_config_word(pdev, PCI_COMMAND, &cmd); |
| if (!(cmd & PCI_COMMAND_MASTER)) { |
| IVTV_ERR("Bus Mastering is not enabled\n"); |
| return -ENXIO; |
| } |
| } |
| IVTV_DEBUG_INFO("Bus Mastering Enabled.\n"); |
| |
| pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); |
| |
| if (pci_latency < 64 && ivtv_pci_latency) { |
| IVTV_INFO("Unreasonably low latency timer, " |
| "setting to 64 (was %d)\n", pci_latency); |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64); |
| pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); |
| } |
| /* This config space value relates to DMA latencies. The |
| default value 0x8080 is too low however and will lead |
| to DMA errors. 0xffff is the max value which solves |
| these problems. */ |
| pci_write_config_dword(pdev, 0x40, 0xffff); |
| |
| IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, " |
| "irq: %d, latency: %d, memory: 0x%llx\n", |
| pdev->device, pdev->revision, pdev->bus->number, |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), |
| pdev->irq, pci_latency, (u64)itv->base_addr); |
| |
| return 0; |
| } |
| |
| static void ivtv_load_and_init_modules(struct ivtv *itv) |
| { |
| u32 hw = itv->card->hw_all; |
| unsigned i; |
| |
| /* check which i2c devices are actually found */ |
| for (i = 0; i < 32; i++) { |
| u32 device = 1 << i; |
| |
| if (!(device & hw)) |
| continue; |
| if (device == IVTV_HW_GPIO || device == IVTV_HW_TVEEPROM) { |
| /* GPIO and TVEEPROM do not use i2c probing */ |
| itv->hw_flags |= device; |
| continue; |
| } |
| if (ivtv_i2c_register(itv, i) == 0) |
| itv->hw_flags |= device; |
| } |
| |
| /* probe for legacy IR controllers that aren't in card definitions */ |
| if ((itv->hw_flags & IVTV_HW_IR_ANY) == 0) |
| ivtv_i2c_new_ir_legacy(itv); |
| |
| if (itv->card->hw_all & IVTV_HW_CX25840) |
| itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840); |
| else if (itv->card->hw_all & IVTV_HW_SAA717X) |
| itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA717X); |
| else if (itv->card->hw_all & IVTV_HW_SAA7114) |
| itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7114); |
| else |
| itv->sd_video = ivtv_find_hw(itv, IVTV_HW_SAA7115); |
| itv->sd_audio = ivtv_find_hw(itv, itv->card->hw_audio_ctrl); |
| itv->sd_muxer = ivtv_find_hw(itv, itv->card->hw_muxer); |
| |
| hw = itv->hw_flags; |
| |
| if (itv->card->type == IVTV_CARD_CX23416GYC) { |
| /* Several variations of this card exist, detect which card |
| type should be used. */ |
| if ((hw & (IVTV_HW_UPD64031A | IVTV_HW_UPD6408X)) == 0) |
| itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS); |
| else if ((hw & IVTV_HW_UPD64031A) == 0) |
| itv->card = ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR); |
| } |
| else if (itv->card->type == IVTV_CARD_GV_MVPRX || |
| itv->card->type == IVTV_CARD_GV_MVPRX2E) { |
| /* The crystal frequency of GVMVPRX is 24.576MHz */ |
| v4l2_subdev_call(itv->sd_video, video, s_crystal_freq, |
| SAA7115_FREQ_24_576_MHZ, SAA7115_FREQ_FL_UCGC); |
| } |
| |
| if (hw & IVTV_HW_CX25840) { |
| itv->vbi.raw_decoder_line_size = 1444; |
| itv->vbi.raw_decoder_sav_odd_field = 0x20; |
| itv->vbi.raw_decoder_sav_even_field = 0x60; |
| itv->vbi.sliced_decoder_line_size = 272; |
| itv->vbi.sliced_decoder_sav_odd_field = 0xB0; |
| itv->vbi.sliced_decoder_sav_even_field = 0xF0; |
| } |
| |
| if (hw & IVTV_HW_SAA711X) { |
| struct v4l2_dbg_chip_ident v; |
| |
| /* determine the exact saa711x model */ |
| itv->hw_flags &= ~IVTV_HW_SAA711X; |
| |
| v.match.type = V4L2_CHIP_MATCH_I2C_DRIVER; |
| strlcpy(v.match.name, "saa7115", sizeof(v.match.name)); |
| ivtv_call_hw(itv, IVTV_HW_SAA711X, core, g_chip_ident, &v); |
| if (v.ident == V4L2_IDENT_SAA7114) { |
| itv->hw_flags |= IVTV_HW_SAA7114; |
| /* VBI is not yet supported by the saa7114 driver. */ |
| itv->v4l2_cap &= ~(V4L2_CAP_SLICED_VBI_CAPTURE|V4L2_CAP_VBI_CAPTURE); |
| } else { |
| itv->hw_flags |= IVTV_HW_SAA7115; |
| } |
| itv->vbi.raw_decoder_line_size = 1443; |
| itv->vbi.raw_decoder_sav_odd_field = 0x25; |
| itv->vbi.raw_decoder_sav_even_field = 0x62; |
| itv->vbi.sliced_decoder_line_size = 51; |
| itv->vbi.sliced_decoder_sav_odd_field = 0xAB; |
| itv->vbi.sliced_decoder_sav_even_field = 0xEC; |
| } |
| |
| if (hw & IVTV_HW_SAA717X) { |
| itv->vbi.raw_decoder_line_size = 1443; |
| itv->vbi.raw_decoder_sav_odd_field = 0x25; |
| itv->vbi.raw_decoder_sav_even_field = 0x62; |
| itv->vbi.sliced_decoder_line_size = 51; |
| itv->vbi.sliced_decoder_sav_odd_field = 0xAB; |
| itv->vbi.sliced_decoder_sav_even_field = 0xEC; |
| } |
| } |
| |
| static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) |
| { |
| int retval = 0; |
| int vbi_buf_size; |
| struct ivtv *itv; |
| |
| itv = kzalloc(sizeof(struct ivtv), GFP_ATOMIC); |
| if (itv == NULL) |
| return -ENOMEM; |
| itv->pdev = pdev; |
| itv->instance = v4l2_device_set_name(&itv->v4l2_dev, "ivtv", |
| &ivtv_instance); |
| |
| retval = v4l2_device_register(&pdev->dev, &itv->v4l2_dev); |
| if (retval) { |
| kfree(itv); |
| return retval; |
| } |
| IVTV_INFO("Initializing card %d\n", itv->instance); |
| |
| ivtv_process_options(itv); |
| if (itv->options.cardtype == -1) { |
| retval = -ENODEV; |
| goto err; |
| } |
| if (ivtv_init_struct1(itv)) { |
| retval = -ENOMEM; |
| goto err; |
| } |
| retval = cx2341x_handler_init(&itv->cxhdl, 50); |
| if (retval) |
| goto err; |
| itv->v4l2_dev.ctrl_handler = &itv->cxhdl.hdl; |
| itv->cxhdl.ops = &ivtv_cxhdl_ops; |
| itv->cxhdl.priv = itv; |
| itv->cxhdl.func = ivtv_api_func; |
| |
| IVTV_DEBUG_INFO("base addr: 0x%llx\n", (u64)itv->base_addr); |
| |
| /* PCI Device Setup */ |
| retval = ivtv_setup_pci(itv, pdev, pci_id); |
| if (retval == -EIO) |
| goto free_worker; |
| if (retval == -ENXIO) |
| goto free_mem; |
| |
| /* map io memory */ |
| IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", |
| (u64)itv->base_addr + IVTV_ENCODER_OFFSET, IVTV_ENCODER_SIZE); |
| itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET, |
| IVTV_ENCODER_SIZE); |
| if (!itv->enc_mem) { |
| IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " |
| "encoder memory\n"); |
| IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of " |
| "vmalloc address space for this window\n"); |
| IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); |
| IVTV_ERR("Use the vmalloc= kernel command line option to set " |
| "VmallocTotal to a larger value\n"); |
| retval = -ENOMEM; |
| goto free_mem; |
| } |
| |
| if (itv->has_cx23415) { |
| IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", |
| (u64)itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); |
| itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET, |
| IVTV_DECODER_SIZE); |
| if (!itv->dec_mem) { |
| IVTV_ERR("ioremap failed. Can't get a window into " |
| "CX23415 decoder memory\n"); |
| IVTV_ERR("Each capture card with a CX23415 needs 8 MB " |
| "of vmalloc address space for this window\n"); |
| IVTV_ERR("Check the output of 'grep Vmalloc " |
| "/proc/meminfo'\n"); |
| IVTV_ERR("Use the vmalloc= kernel command line option " |
| "to set VmallocTotal to a larger value\n"); |
| retval = -ENOMEM; |
| goto free_mem; |
| } |
| } |
| else { |
| itv->dec_mem = itv->enc_mem; |
| } |
| |
| /* map registers memory */ |
| IVTV_DEBUG_INFO("attempting ioremap at 0x%llx len 0x%08x\n", |
| (u64)itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); |
| itv->reg_mem = |
| ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); |
| if (!itv->reg_mem) { |
| IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 " |
| "register space\n"); |
| IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of " |
| "vmalloc address space for this window\n"); |
| IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n"); |
| IVTV_ERR("Use the vmalloc= kernel command line option to set " |
| "VmallocTotal to a larger value\n"); |
| retval = -ENOMEM; |
| goto free_io; |
| } |
| |
| retval = ivtv_gpio_init(itv); |
| if (retval) |
| goto free_io; |
| |
| /* active i2c */ |
| IVTV_DEBUG_INFO("activating i2c...\n"); |
| if (init_ivtv_i2c(itv)) { |
| IVTV_ERR("Could not initialize i2c\n"); |
| goto free_io; |
| } |
| |
| if (itv->card->hw_all & IVTV_HW_TVEEPROM) { |
| /* Based on the model number the cardtype may be changed. |
| The PCI IDs are not always reliable. */ |
| ivtv_process_eeprom(itv); |
| } |
| if (itv->card->comment) |
| IVTV_INFO("%s", itv->card->comment); |
| if (itv->card->v4l2_capabilities == 0) { |
| /* card was detected but is not supported */ |
| retval = -ENODEV; |
| goto free_i2c; |
| } |
| |
| if (itv->std == 0) { |
| itv->std = V4L2_STD_NTSC_M; |
| } |
| |
| if (itv->options.tuner == -1) { |
| int i; |
| |
| for (i = 0; i < IVTV_CARD_MAX_TUNERS; i++) { |
| if ((itv->std & itv->card->tuners[i].std) == 0) |
| continue; |
| itv->options.tuner = itv->card->tuners[i].tuner; |
| break; |
| } |
| } |
| /* if no tuner was found, then pick the first tuner in the card list */ |
| if (itv->options.tuner == -1 && itv->card->tuners[0].std) { |
| itv->std = itv->card->tuners[0].std; |
| if (itv->std & V4L2_STD_PAL) |
| itv->std = V4L2_STD_PAL_BG | V4L2_STD_PAL_H; |
| else if (itv->std & V4L2_STD_NTSC) |
| itv->std = V4L2_STD_NTSC_M; |
| else if (itv->std & V4L2_STD_SECAM) |
| itv->std = V4L2_STD_SECAM_L; |
| itv->options.tuner = itv->card->tuners[0].tuner; |
| } |
| if (itv->options.radio == -1) |
| itv->options.radio = (itv->card->radio_input.audio_type != 0); |
| |
| /* The card is now fully identified, continue with card-specific |
| initialization. */ |
| ivtv_init_struct2(itv); |
| |
| ivtv_load_and_init_modules(itv); |
| |
| if (itv->std & V4L2_STD_525_60) { |
| itv->is_60hz = 1; |
| itv->is_out_60hz = 1; |
| } else { |
| itv->is_50hz = 1; |
| itv->is_out_50hz = 1; |
| } |
| |
| itv->yuv_info.osd_full_w = 720; |
| itv->yuv_info.osd_full_h = itv->is_out_50hz ? 576 : 480; |
| itv->yuv_info.v4l2_src_w = itv->yuv_info.osd_full_w; |
| itv->yuv_info.v4l2_src_h = itv->yuv_info.osd_full_h; |
| |
| cx2341x_handler_set_50hz(&itv->cxhdl, itv->is_50hz); |
| |
| itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_MPG] = 0x08000; |
| itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_PCM] = 0x01200; |
| itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_MPG] = 0x10000; |
| itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_YUV] = 0x10000; |
| itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_YUV] = 0x08000; |
| |
| /* Setup VBI Raw Size. Should be big enough to hold PAL. |
| It is possible to switch between PAL and NTSC, so we need to |
| take the largest size here. */ |
| /* 1456 is multiple of 16, real size = 1444 */ |
| itv->vbi.raw_size = 1456; |
| /* We use a buffer size of 1/2 of the total size needed for a |
| frame. This is actually very useful, since we now receive |
| a field at a time and that makes 'compressing' the raw data |
| down to size by stripping off the SAV codes a lot easier. |
| Note: having two different buffer sizes prevents standard |
| switching on the fly. We need to find a better solution... */ |
| vbi_buf_size = itv->vbi.raw_size * (itv->is_60hz ? 24 : 36) / 2; |
| itv->stream_buf_size[IVTV_ENC_STREAM_TYPE_VBI] = vbi_buf_size; |
| itv->stream_buf_size[IVTV_DEC_STREAM_TYPE_VBI] = sizeof(struct v4l2_sliced_vbi_data) * 36; |
| |
| if (itv->options.radio > 0) |
| itv->v4l2_cap |= V4L2_CAP_RADIO; |
| |
| if (itv->options.tuner > -1) { |
| struct tuner_setup setup; |
| |
| setup.addr = ADDR_UNSET; |
| setup.type = itv->options.tuner; |
| setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */ |
| if (itv->options.radio > 0) |
| setup.mode_mask |= T_RADIO; |
| setup.tuner_callback = (setup.type == TUNER_XC2028) ? |
| ivtv_reset_tuner_gpio : NULL; |
| ivtv_call_all(itv, tuner, s_type_addr, &setup); |
| if (setup.type == TUNER_XC2028) { |
| static struct xc2028_ctrl ctrl = { |
| .fname = XC2028_DEFAULT_FIRMWARE, |
| .max_len = 64, |
| }; |
| struct v4l2_priv_tun_config cfg = { |
| .tuner = itv->options.tuner, |
| .priv = &ctrl, |
| }; |
| ivtv_call_all(itv, tuner, s_config, &cfg); |
| } |
| } |
| |
| /* The tuner is fixed to the standard. The other inputs (e.g. S-Video) |
| are not. */ |
| itv->tuner_std = itv->std; |
| |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { |
| struct v4l2_ctrl_handler *hdl = itv->v4l2_dev.ctrl_handler; |
| |
| itv->ctrl_pts = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, |
| V4L2_CID_MPEG_VIDEO_DEC_PTS, 0, 0, 0, 0); |
| itv->ctrl_frame = v4l2_ctrl_new_std(hdl, &ivtv_hdl_out_ops, |
| V4L2_CID_MPEG_VIDEO_DEC_FRAME, 0, 0, 0, 0); |
| /* Note: V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO is not supported, |
| mask that menu item. */ |
| itv->ctrl_audio_playback = |
| v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, |
| V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK, |
| V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, |
| 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, |
| V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO); |
| itv->ctrl_audio_multilingual_playback = |
| v4l2_ctrl_new_std_menu(hdl, &ivtv_hdl_out_ops, |
| V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK, |
| V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO, |
| 1 << V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO, |
| V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT); |
| if (hdl->error) { |
| retval = hdl->error; |
| goto free_i2c; |
| } |
| v4l2_ctrl_cluster(2, &itv->ctrl_pts); |
| v4l2_ctrl_cluster(2, &itv->ctrl_audio_playback); |
| ivtv_call_all(itv, video, s_std_output, itv->std); |
| /* Turn off the output signal. The mpeg decoder is not yet |
| active so without this you would get a green image until the |
| mpeg decoder becomes active. */ |
| ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0); |
| } |
| |
| /* clear interrupt mask, effectively disabling interrupts */ |
| ivtv_set_irq_mask(itv, 0xffffffff); |
| |
| /* Register IRQ */ |
| retval = request_irq(itv->pdev->irq, ivtv_irq_handler, |
| IRQF_SHARED | IRQF_DISABLED, itv->v4l2_dev.name, (void *)itv); |
| if (retval) { |
| IVTV_ERR("Failed to register irq %d\n", retval); |
| goto free_i2c; |
| } |
| |
| retval = ivtv_streams_setup(itv); |
| if (retval) { |
| IVTV_ERR("Error %d setting up streams\n", retval); |
| goto free_irq; |
| } |
| retval = ivtv_streams_register(itv); |
| if (retval) { |
| IVTV_ERR("Error %d registering devices\n", retval); |
| goto free_streams; |
| } |
| IVTV_INFO("Initialized card: %s\n", itv->card_name); |
| |
| /* Load ivtv submodules (ivtv-alsa) */ |
| request_modules(itv); |
| return 0; |
| |
| free_streams: |
| ivtv_streams_cleanup(itv, 1); |
| free_irq: |
| free_irq(itv->pdev->irq, (void *)itv); |
| free_i2c: |
| v4l2_ctrl_handler_free(&itv->cxhdl.hdl); |
| exit_ivtv_i2c(itv); |
| free_io: |
| ivtv_iounmap(itv); |
| free_mem: |
| release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); |
| release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); |
| if (itv->has_cx23415) |
| release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); |
| free_worker: |
| kthread_stop(itv->irq_worker_task); |
| err: |
| if (retval == 0) |
| retval = -ENODEV; |
| IVTV_ERR("Error %d on initialization\n", retval); |
| |
| v4l2_device_unregister(&itv->v4l2_dev); |
| kfree(itv); |
| return retval; |
| } |
| |
| int ivtv_init_on_first_open(struct ivtv *itv) |
| { |
| struct v4l2_frequency vf; |
| /* Needed to call ioctls later */ |
| struct ivtv_open_id fh; |
| int fw_retry_count = 3; |
| int video_input; |
| |
| fh.itv = itv; |
| fh.type = IVTV_ENC_STREAM_TYPE_MPG; |
| |
| if (test_bit(IVTV_F_I_FAILED, &itv->i_flags)) |
| return -ENXIO; |
| |
| if (test_and_set_bit(IVTV_F_I_INITED, &itv->i_flags)) |
| return 0; |
| |
| while (--fw_retry_count > 0) { |
| /* load firmware */ |
| if (ivtv_firmware_init(itv) == 0) |
| break; |
| if (fw_retry_count > 1) |
| IVTV_WARN("Retry loading firmware\n"); |
| } |
| |
| if (fw_retry_count == 0) { |
| set_bit(IVTV_F_I_FAILED, &itv->i_flags); |
| return -ENXIO; |
| } |
| |
| /* Try and get firmware versions */ |
| IVTV_DEBUG_INFO("Getting firmware version..\n"); |
| ivtv_firmware_versions(itv); |
| |
| if (itv->card->hw_all & IVTV_HW_CX25840) |
| v4l2_subdev_call(itv->sd_video, core, load_fw); |
| |
| vf.tuner = 0; |
| vf.type = V4L2_TUNER_ANALOG_TV; |
| vf.frequency = 6400; /* the tuner 'baseline' frequency */ |
| |
| /* Set initial frequency. For PAL/SECAM broadcasts no |
| 'default' channel exists AFAIK. */ |
| if (itv->std == V4L2_STD_NTSC_M_JP) { |
| vf.frequency = 1460; /* ch. 1 91250*16/1000 */ |
| } |
| else if (itv->std & V4L2_STD_NTSC_M) { |
| vf.frequency = 1076; /* ch. 4 67250*16/1000 */ |
| } |
| |
| video_input = itv->active_input; |
| itv->active_input++; /* Force update of input */ |
| ivtv_s_input(NULL, &fh, video_input); |
| |
| /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code |
| in one place. */ |
| itv->std++; /* Force full standard initialization */ |
| itv->std_out = itv->std; |
| ivtv_s_frequency(NULL, &fh, &vf); |
| |
| if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) { |
| /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes |
| the mpeg decoder so now the saa7127 receives a proper |
| signal. */ |
| ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 1); |
| ivtv_init_mpeg_decoder(itv); |
| } |
| |
| /* On a cx23416 this seems to be able to enable DMA to the chip? */ |
| if (!itv->has_cx23415) |
| write_reg_sync(0x03, IVTV_REG_DMACONTROL); |
| |
| ivtv_s_std_enc(itv, &itv->tuner_std); |
| |
| /* Default interrupts enabled. For the PVR350 this includes the |
| decoder VSYNC interrupt, which is always on. It is not only used |
| during decoding but also by the OSD. |
| Some old PVR250 cards had a cx23415, so testing for that is too |
| general. Instead test if the card has video output capability. */ |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { |
| ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT | IVTV_IRQ_DEC_VSYNC); |
| ivtv_set_osd_alpha(itv); |
| ivtv_s_std_dec(itv, &itv->tuner_std); |
| } else { |
| ivtv_clear_irq_mask(itv, IVTV_IRQ_MASK_INIT); |
| } |
| |
| /* Setup initial controls */ |
| cx2341x_handler_setup(&itv->cxhdl); |
| return 0; |
| } |
| |
| static void ivtv_remove(struct pci_dev *pdev) |
| { |
| struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); |
| struct ivtv *itv = to_ivtv(v4l2_dev); |
| int i; |
| |
| IVTV_DEBUG_INFO("Removing card\n"); |
| |
| flush_request_modules(itv); |
| |
| if (test_bit(IVTV_F_I_INITED, &itv->i_flags)) { |
| /* Stop all captures */ |
| IVTV_DEBUG_INFO("Stopping all streams\n"); |
| if (atomic_read(&itv->capturing) > 0) |
| ivtv_stop_all_captures(itv); |
| |
| /* Stop all decoding */ |
| IVTV_DEBUG_INFO("Stopping decoding\n"); |
| |
| /* Turn off the TV-out */ |
| if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) |
| ivtv_call_hw(itv, IVTV_HW_SAA7127, video, s_stream, 0); |
| if (atomic_read(&itv->decoding) > 0) { |
| int type; |
| |
| if (test_bit(IVTV_F_I_DEC_YUV, &itv->i_flags)) |
| type = IVTV_DEC_STREAM_TYPE_YUV; |
| else |
| type = IVTV_DEC_STREAM_TYPE_MPG; |
| ivtv_stop_v4l2_decode_stream(&itv->streams[type], |
| V4L2_DEC_CMD_STOP_TO_BLACK | V4L2_DEC_CMD_STOP_IMMEDIATELY, 0); |
| } |
| ivtv_halt_firmware(itv); |
| } |
| |
| /* Interrupts */ |
| ivtv_set_irq_mask(itv, 0xffffffff); |
| del_timer_sync(&itv->dma_timer); |
| |
| /* Kill irq worker */ |
| flush_kthread_worker(&itv->irq_worker); |
| kthread_stop(itv->irq_worker_task); |
| |
| ivtv_streams_cleanup(itv, 1); |
| ivtv_udma_free(itv); |
| |
| v4l2_ctrl_handler_free(&itv->cxhdl.hdl); |
| |
| exit_ivtv_i2c(itv); |
| |
| free_irq(itv->pdev->irq, (void *)itv); |
| ivtv_iounmap(itv); |
| |
| release_mem_region(itv->base_addr, IVTV_ENCODER_SIZE); |
| release_mem_region(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE); |
| if (itv->has_cx23415) |
| release_mem_region(itv->base_addr + IVTV_DECODER_OFFSET, IVTV_DECODER_SIZE); |
| |
| pci_disable_device(itv->pdev); |
| for (i = 0; i < IVTV_VBI_FRAMES; i++) |
| kfree(itv->vbi.sliced_mpeg_data[i]); |
| |
| printk(KERN_INFO "ivtv: Removed %s\n", itv->card_name); |
| |
| v4l2_device_unregister(&itv->v4l2_dev); |
| kfree(itv); |
| } |
| |
| /* define a pci_driver for card detection */ |
| static struct pci_driver ivtv_pci_driver = { |
| .name = "ivtv", |
| .id_table = ivtv_pci_tbl, |
| .probe = ivtv_probe, |
| .remove = ivtv_remove, |
| }; |
| |
| static int __init module_start(void) |
| { |
| printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION); |
| |
| /* Validate parameters */ |
| if (ivtv_first_minor < 0 || ivtv_first_minor >= IVTV_MAX_CARDS) { |
| printk(KERN_ERR "ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n", |
| IVTV_MAX_CARDS - 1); |
| return -1; |
| } |
| |
| if (ivtv_debug < 0 || ivtv_debug > 2047) { |
| ivtv_debug = 0; |
| printk(KERN_INFO "ivtv: Debug value must be >= 0 and <= 2047\n"); |
| } |
| |
| if (pci_register_driver(&ivtv_pci_driver)) { |
| printk(KERN_ERR "ivtv: Error detecting PCI card\n"); |
| return -ENODEV; |
| } |
| printk(KERN_INFO "ivtv: End initialization\n"); |
| return 0; |
| } |
| |
| static void __exit module_cleanup(void) |
| { |
| pci_unregister_driver(&ivtv_pci_driver); |
| } |
| |
| /* Note: These symbols are exported because they are used by the ivtvfb |
| framebuffer module and an infrared module for the IR-blaster. */ |
| EXPORT_SYMBOL(ivtv_set_irq_mask); |
| EXPORT_SYMBOL(ivtv_api); |
| EXPORT_SYMBOL(ivtv_vapi); |
| EXPORT_SYMBOL(ivtv_vapi_result); |
| EXPORT_SYMBOL(ivtv_clear_irq_mask); |
| EXPORT_SYMBOL(ivtv_debug); |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| EXPORT_SYMBOL(ivtv_fw_debug); |
| #endif |
| EXPORT_SYMBOL(ivtv_reset_ir_gpio); |
| EXPORT_SYMBOL(ivtv_udma_setup); |
| EXPORT_SYMBOL(ivtv_udma_unmap); |
| EXPORT_SYMBOL(ivtv_udma_alloc); |
| EXPORT_SYMBOL(ivtv_udma_prepare); |
| EXPORT_SYMBOL(ivtv_init_on_first_open); |
| EXPORT_SYMBOL(ivtv_firmware_check); |
| |
| module_init(module_start); |
| module_exit(module_cleanup); |