drm/i915: move intel_crtc->fdi_lanes to pipe_config
We need this for two reasons:
- Correct handling of shared fdi lanes on ivb with fastboot.
- Handling fdi link bw limits when we only have two fdi lanes by
dithering down a bit.
Just search&replace in this patch, no functional change at all.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0d7cf31..c9c4741 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -181,7 +181,8 @@
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
- FDI_RX_PLL_ENABLE | ((intel_crtc->fdi_lanes - 1) << 19);
+ FDI_RX_PLL_ENABLE |
+ ((intel_crtc->config.fdi_lanes - 1) << 19);
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
udelay(220);
@@ -209,7 +210,7 @@
* port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
- ((intel_crtc->fdi_lanes - 1) << 1) |
+ ((intel_crtc->config.fdi_lanes - 1) << 1) |
hsw_ddi_buf_ctl_values[i / 2]);
POSTING_READ(DDI_BUF_CTL(PORT_E));
@@ -1022,7 +1023,7 @@
} else if (type == INTEL_OUTPUT_ANALOG) {
temp |= TRANS_DDI_MODE_SELECT_FDI;
- temp |= (intel_crtc->fdi_lanes - 1) << 1;
+ temp |= (intel_crtc->config.fdi_lanes - 1) << 1;
} else if (type == INTEL_OUTPUT_DISPLAYPORT ||
type == INTEL_OUTPUT_EDP) {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 983822e..a379977 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2420,7 +2420,7 @@
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
I915_WRITE(reg, temp | FDI_TX_ENABLE);
@@ -2518,7 +2518,7 @@
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_PATTERN_1;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2653,7 +2653,7 @@
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(7 << 19);
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
@@ -2755,7 +2755,7 @@
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~((0x7 << 19) | (0x7 << 16));
- temp |= (intel_crtc->fdi_lanes - 1) << 19;
+ temp |= (intel_crtc->config.fdi_lanes - 1) << 19;
temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
@@ -5398,12 +5398,12 @@
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
- pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
- if (intel_crtc->fdi_lanes > 4) {
+ pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
+ if (intel_crtc->config.fdi_lanes > 4) {
DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
- pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
+ pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 4;
+ intel_crtc->config.fdi_lanes = 4;
return false;
}
@@ -5416,28 +5416,28 @@
return true;
case PIPE_B:
if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
- intel_crtc->fdi_lanes > 2) {
+ intel_crtc->config.fdi_lanes > 2) {
DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
- pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
+ pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 2;
+ intel_crtc->config.fdi_lanes = 2;
return false;
}
- if (intel_crtc->fdi_lanes > 2)
+ if (intel_crtc->config.fdi_lanes > 2)
WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
else
cpt_enable_fdi_bc_bifurcation(dev);
return true;
case PIPE_C:
- if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) {
- if (intel_crtc->fdi_lanes > 2) {
+ if (!pipe_B_crtc->base.enabled || pipe_B_crtc->config.fdi_lanes <= 2) {
+ if (intel_crtc->config.fdi_lanes > 2) {
DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
- pipe_name(intel_crtc->pipe), intel_crtc->fdi_lanes);
+ pipe_name(intel_crtc->pipe), intel_crtc->config.fdi_lanes);
/* Clamp lanes to avoid programming the hw with bogus values. */
- intel_crtc->fdi_lanes = 2;
+ intel_crtc->config.fdi_lanes = 2;
return false;
}
@@ -5525,7 +5525,7 @@
lane = ironlake_get_lanes_required(target_clock, link_bw,
intel_crtc->config.pipe_bpp);
- intel_crtc->fdi_lanes = lane;
+ intel_crtc->config.fdi_lanes = lane;
if (intel_crtc->config.pixel_multiplier > 1)
link_bw *= intel_crtc->config.pixel_multiplier;
@@ -5752,7 +5752,7 @@
/* Note, this also computes intel_crtc->fdi_lanes which is used below in
* ironlake_check_fdi_lanes. */
- intel_crtc->fdi_lanes = 0;
+ intel_crtc->config.fdi_lanes = 0;
if (intel_crtc->config.has_pch_encoder)
ironlake_fdi_set_m_n(crtc);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index a8c6960..cc075a3 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -249,6 +249,9 @@
u32 pos;
u32 size;
} pch_pfit;
+
+ /* FDI lanes used, only valid if has_pch_encoder is set. */
+ int fdi_lanes;
};
struct intel_crtc {
@@ -267,7 +270,6 @@
bool lowfreq_avail;
struct intel_overlay *overlay;
struct intel_unpin_work *unpin_work;
- int fdi_lanes;
atomic_t unpin_work_count;