staging: comedi: das08: Replace printk calls
Replace the printk calls with dev_info, dev_err, etc. Some of the
printk strings were missing newlines on the end.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c
index 901411e..680384c 100644
--- a/drivers/staging/comedi/drivers/das08.c
+++ b/drivers/staging/comedi/drivers/das08.c
@@ -274,7 +274,7 @@
/* clear over-range bits for 16-bit boards */
if (thisboard->ai_nbits == 16)
if (inb(dev->iobase + DAS08_MSB) & 0x80)
- printk(KERN_INFO "das08: over-range\n");
+ dev_info(dev->class_dev, "over-range\n");
/* trigger conversion */
outb_p(0, dev->iobase + DAS08_TRIG_12BIT);
@@ -284,7 +284,7 @@
break;
}
if (i == TIMEOUT) {
- printk(KERN_ERR "das08: timeout\n");
+ dev_err(dev->class_dev, "timeout\n");
return -ETIME;
}
msb = inb(dev->iobase + DAS08_MSB);
@@ -529,11 +529,7 @@
struct comedi_insn *insn, unsigned int *data)
{
int chan = insn->chanspec;
-
- /* printk("Reading counter channel %d ",chan); */
data[0] = i8254_read_channel(&devpriv->i8254, chan);
- /* printk("=> 0x%08X\n",data[0]); */
-
return 1;
}
@@ -542,10 +538,7 @@
struct comedi_insn *insn, unsigned int *data)
{
int chan = insn->chanspec;
-
- /* printk("Writing counter channel %d with 0x%04X\n",chan,data[0]); */
i8254_write_channel(&devpriv->i8254, chan, data[0]);
-
return 1;
}
@@ -948,15 +941,14 @@
if (ret < 0)
return ret;
- printk(KERN_INFO "comedi%d: das08: ", dev->minor);
+ dev_info(dev->class_dev, "attach\n");
if (IS_ENABLED(CONFIG_COMEDI_DAS08_PCI) && thisboard->bustype == pci) {
unsigned long pci_iobase = 0;
struct pci_dev *pdev = NULL;
if (it->options[0] || it->options[1]) {
- printk("bus %i slot %i ",
+ dev_info(dev->class_dev, "pci bus %i slot %i\n",
it->options[0], it->options[1]);
}
- printk("\n");
/* find card */
for_each_pci_dev(pdev) {
if (pdev->vendor == PCI_VENDOR_ID_COMPUTERBOARDS
@@ -973,21 +965,21 @@
}
}
if (!pdev) {
- printk(KERN_ERR "No pci das08 cards found\n");
+ dev_err(dev->class_dev, "No pci das08 cards found\n");
return -EIO;
}
devpriv->pdev = pdev;
/* enable PCI device and reserve I/O spaces */
if (comedi_pci_enable(pdev, DRV_NAME)) {
- printk(KERN_ERR " Error enabling PCI device and "
- "requesting regions\n");
+ dev_err(dev->class_dev,
+ "Error enabling PCI device and requesting regions\n");
return -EIO;
}
/* read base addresses */
pci_iobase = pci_resource_start(pdev, 1);
iobase = pci_resource_start(pdev, 2);
- printk(KERN_INFO "pcibase 0x%lx iobase 0x%lx\n",
- pci_iobase, iobase);
+ dev_info(dev->class_dev, "pcibase 0x%lx iobase 0x%lx\n",
+ pci_iobase, iobase);
devpriv->pci_iobase = pci_iobase;
#if 0
/* We could enable to pci-das08's interrupt here to make it possible
@@ -1003,9 +995,9 @@
} else if (IS_ENABLED(CONFIG_COMEDI_DAS08_ISA) &&
(thisboard->bustype == isa || thisboard->bustype == pc104)) {
iobase = it->options[0];
- printk(KERN_INFO " iobase 0x%lx\n", iobase);
+ dev_info(dev->class_dev, "iobase 0x%lx\n", iobase);
if (!request_region(iobase, thisboard->iosize, DRV_NAME)) {
- printk(KERN_ERR " I/O port conflict\n");
+ dev_err(dev->class_dev, "I/O port conflict\n");
return -EIO;
}
} else