[POWERPC] Add initial iomega StorCenter board port.
Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Wilcox <andy@protium.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 8924095..6c80837 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -9,6 +9,8 @@
select FSL_SOC
select PPC_UDBG_16550 if SERIAL_8250
select DEFAULT_UIMAGE
+ select MPC10X_OPENPIC
+ select MPC10X_BRIDGE
help
Select LINKSTATION if configuring for one of PPC- (MPC8241)
based NAS systems from Buffalo Technology. So far only
@@ -16,6 +18,19 @@
Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
Terastation systems should be supported too.
+config STORCENTER
+ bool "IOMEGA StorCenter"
+ depends on EMBEDDED6xx
+ select MPIC
+ select FSL_SOC
+ select PPC_UDBG_16550 if SERIAL_8250
+ select WANT_DEVICE_TREE
+ select MPC10X_OPENPIC
+ select MPC10X_BRIDGE
+ help
+ Select STORCENTER if configuring for the iomega StorCenter
+ with an 8241 CPU in it.
+
config MPC7448HPC2
bool "Freescale MPC7448HPC2(Taiga)"
depends on EMBEDDED6xx
@@ -23,6 +38,7 @@
select DEFAULT_UIMAGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
+ select TSI108_BRIDGE
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
@@ -33,6 +49,7 @@
select TSI108_BRIDGE
select PPC_UDBG_16550
select WANT_DEVICE_TREE
+ select TSI108_BRIDGE
help
Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
Board with TSI108/9 bridge (Hickory/Holly)
@@ -48,17 +65,13 @@
config TSI108_BRIDGE
bool
- depends on MPC7448HPC2 || PPC_HOLLY
select PCI
select MPIC
select MPIC_WEIRD
- default y
config MPC10X_BRIDGE
bool
- depends on LINKSTATION
select PPC_INDIRECT_PCI
- default y
config MV64X60
bool
@@ -67,8 +80,6 @@
config MPC10X_OPENPIC
bool
- depends on LINKSTATION
- default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"