ARM: dts: imx6qdl-sabreauto: Support debug LED
The D9 LED controlled by gpio on the imx6qdl-sabreauto
CPU board is a debug LED according to the board design.
This patch adds the relevant device tree nodes to the
imx6qdl-sabreauto device tree file to support this LED.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 33e9bff..009abd6 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -10,11 +10,24 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
memory {
reg = <0x10000000 0x80000000>;
};
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ user {
+ label = "debug";
+ gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif",
"fsl,imx-sabreauto-spdif";
@@ -217,6 +230,12 @@
>;
};
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
+ >;
+ };
+
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1