i2c-parport: Add SMBus alert support
Add support for the SMBus alert mechanism to the i2c-parport driver.
The ADM1032 evaluation board at least is properly wired for this.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Trent Piepho <tpiepho@freescale.com>
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 056af18..220fca7 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -1,7 +1,7 @@
/* ------------------------------------------------------------------------ *
* i2c-parport.c I2C bus over parallel port *
* ------------------------------------------------------------------------ *
- Copyright (C) 2003-2007 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
Based on older i2c-philips-par.c driver
Copyright (C) 1995-2000 Simon G. Vogl
@@ -31,6 +31,7 @@
#include <linux/parport.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-smbus.h>
#include "i2c-parport.h"
/* ----- Device list ------------------------------------------------------ */
@@ -39,6 +40,8 @@
struct pardevice *pdev;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo_data;
+ struct i2c_smbus_alert_setup alert_data;
+ struct i2c_client *ara;
struct i2c_par *next;
};
@@ -144,6 +147,19 @@
/* ----- I2c and parallel port call-back functions and structures --------- */
+void i2c_parport_irq(void *data)
+{
+ struct i2c_par *adapter = data;
+ struct i2c_client *ara = adapter->ara;
+
+ if (ara) {
+ dev_dbg(&ara->dev, "SMBus alert received\n");
+ i2c_handle_smbus_alert(ara);
+ } else
+ dev_dbg(&adapter->adapter.dev,
+ "SMBus alert received but no ARA client!\n");
+}
+
static void i2c_parport_attach (struct parport *port)
{
struct i2c_par *adapter;
@@ -155,8 +171,9 @@
}
pr_debug("i2c-parport: attaching to %s\n", port->name);
+ parport_disable_irq(port);
adapter->pdev = parport_register_device(port, "i2c-parport",
- NULL, NULL, NULL, PARPORT_FLAG_EXCL, NULL);
+ NULL, NULL, i2c_parport_irq, PARPORT_FLAG_EXCL, adapter);
if (!adapter->pdev) {
printk(KERN_ERR "i2c-parport: Unable to register with parport\n");
goto ERROR0;
@@ -197,6 +214,18 @@
goto ERROR1;
}
+ /* Setup SMBus alert if supported */
+ if (adapter_parm[type].smbus_alert) {
+ adapter->alert_data.alert_edge_triggered = 1;
+ adapter->ara = i2c_setup_smbus_alert(&adapter->adapter,
+ &adapter->alert_data);
+ if (adapter->ara)
+ parport_enable_irq(port);
+ else
+ printk(KERN_WARNING "i2c-parport: Failed to register "
+ "ARA client\n");
+ }
+
/* Add the new adapter to the list */
adapter->next = adapter_list;
adapter_list = adapter;
@@ -217,6 +246,10 @@
for (prev = NULL, adapter = adapter_list; adapter;
prev = adapter, adapter = adapter->next) {
if (adapter->pdev->port == port) {
+ if (adapter->ara) {
+ parport_disable_irq(port);
+ i2c_unregister_device(adapter->ara);
+ }
i2c_del_adapter(&adapter->adapter);
/* Un-init if needed (power off...) */