V4L/DVB (3318b): sem2mutex: drivers/media/, #2
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 1c1557d..671fc52 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -362,12 +362,12 @@
return -EBUSY;
}
- init_MUTEX(&dev->fileop_lock); /* to 1 == available */
+ mutex_init(&dev->fileop_lock); /* to 1 == available */
spin_lock_init(&dev->queue_lock);
init_waitqueue_head(&dev->wait_frame);
init_waitqueue_head(&dev->wait_stream);
- down(&dev->lock);
+ mutex_lock(&dev->lock);
if (dev->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
em28xx_set_alternate(dev);
@@ -404,8 +404,8 @@
dev->state |= DEV_INITIALIZED;
- err:
- up(&dev->lock);
+err:
+ mutex_unlock(&dev->lock);
up_read(&em28xx_disconnect);
return errCode;
}
@@ -447,7 +447,7 @@
em28xx_videodbg("users=%d\n", dev->users);
- down(&dev->lock);
+ mutex_lock(&dev->lock);
em28xx_uninit_isoc(dev);
@@ -456,7 +456,7 @@
/* the device is already disconnect, free the remaining resources */
if (dev->state & DEV_DISCONNECTED) {
em28xx_release_resources(dev);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
kfree(dev);
return 0;
}
@@ -472,7 +472,7 @@
dev->users--;
wake_up_interruptible_nr(&dev->open, 1);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -496,7 +496,7 @@
em28xx_videodbg("V4L2_BUF_TYPE_VBI_CAPTURE is set\n");
em28xx_videodbg("not supported yet! ...\n");
if (copy_to_user(buf, "", 1)) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EFAULT;
}
return (1);
@@ -505,38 +505,38 @@
em28xx_videodbg("V4L2_BUF_TYPE_SLICED_VBI_CAPTURE is set\n");
em28xx_videodbg("not supported yet! ...\n");
if (copy_to_user(buf, "", 1)) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EFAULT;
}
return (1);
}
- if (down_interruptible(&dev->fileop_lock))
+ if (mutex_lock_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
em28xx_videodbg("device not present\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
em28xx_videodbg("device misconfigured; close and open it again\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EIO;
}
if (dev->io == IO_MMAP) {
em28xx_videodbg ("IO method is set to mmap; close and open"
" the device again to choose the read method\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EINVAL;
}
if (dev->io == IO_NONE) {
if (!em28xx_request_buffers(dev, EM28XX_NUM_READ_FRAMES)) {
em28xx_errdev("read failed, not enough memory\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -ENOMEM;
}
dev->io = IO_READ;
@@ -545,13 +545,13 @@
}
if (!count) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return 0;
}
if (list_empty(&dev->outqueue)) {
if (filp->f_flags & O_NONBLOCK) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EAGAIN;
}
ret = wait_event_interruptible
@@ -559,11 +559,11 @@
(!list_empty(&dev->outqueue)) ||
(dev->state & DEV_DISCONNECTED));
if (ret) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return ret;
}
if (dev->state & DEV_DISCONNECTED) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -ENODEV;
}
}
@@ -582,12 +582,12 @@
count = f->buf.length;
if (copy_to_user(buf, f->bufmem, count)) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EFAULT;
}
*f_pos += count;
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return count;
}
@@ -601,7 +601,7 @@
unsigned int mask = 0;
struct em28xx *dev = filp->private_data;
- if (down_interruptible(&dev->fileop_lock))
+ if (mutex_lock_interruptible(&dev->fileop_lock))
return POLLERR;
if (dev->state & DEV_DISCONNECTED) {
@@ -627,13 +627,13 @@
if (!list_empty(&dev->outqueue))
mask |= POLLIN | POLLRDNORM;
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return mask;
}
}
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return POLLERR;
}
@@ -673,25 +673,25 @@
struct em28xx *dev = filp->private_data;
- if (down_interruptible(&dev->fileop_lock))
+ if (mutex_lock_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
em28xx_videodbg("mmap: device not present\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
em28xx_videodbg ("mmap: Device is misconfigured; close and "
"open it again\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EIO;
}
if (dev->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
size != PAGE_ALIGN(dev->frame[0].buf.length)) {
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EINVAL;
}
@@ -701,7 +701,7 @@
}
if (i == dev->num_frames) {
em28xx_videodbg("mmap: user supplied mapping address is out of range\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EINVAL;
}
@@ -713,7 +713,7 @@
while (size > 0) { /* size is page-aligned */
if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
em28xx_videodbg("mmap: vm_insert_page failed\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EAGAIN;
}
start += PAGE_SIZE;
@@ -725,7 +725,7 @@
vma->vm_private_data = &dev->frame[i];
em28xx_vm_open(vma);
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return 0;
}
@@ -1125,7 +1125,7 @@
if (i == TVNORMS)
return -EINVAL;
- down(&dev->lock);
+ mutex_lock(&dev->lock);
dev->tvnorm = &tvnorms[i];
em28xx_set_norm(dev, dev->width, dev->height);
@@ -1135,7 +1135,7 @@
em28xx_i2c_call_clients(dev, VIDIOC_S_STD,
&dev->tvnorm->id);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -1189,9 +1189,9 @@
if (0 == INPUT(*index)->type)
return -EINVAL;
- down(&dev->lock);
+ mutex_lock(&dev->lock);
video_mux(dev, *index);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
@@ -1338,10 +1338,10 @@
/* t->signal = 0xffff;*/
/* em28xx_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/
/* No way to get signal strength? */
- down(&dev->lock);
+ mutex_lock(&dev->lock);
em28xx_i2c_call_clients(dev, DECODER_GET_STATUS,
&status);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
t->signal =
(status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
@@ -1363,10 +1363,10 @@
t->rangehigh = 0xffffffffUL; /* FIXME: set correct range */
/* t->signal = 0xffff; */
/* No way to get signal strength? */
- down(&dev->lock);
+ mutex_lock(&dev->lock);
em28xx_i2c_call_clients(dev, DECODER_GET_STATUS,
&status);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
t->signal =
(status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
@@ -1394,10 +1394,10 @@
if (V4L2_TUNER_ANALOG_TV != f->type)
return -EINVAL;
- down(&dev->lock);
+ mutex_lock(&dev->lock);
dev->ctl_freq = f->frequency;
em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
return 0;
}
case VIDIOC_CROPCAP:
@@ -1660,25 +1660,25 @@
int ret = 0;
struct em28xx *dev = filp->private_data;
- if (down_interruptible(&dev->fileop_lock))
+ if (mutex_lock_interruptible(&dev->fileop_lock))
return -ERESTARTSYS;
if (dev->state & DEV_DISCONNECTED) {
em28xx_errdev("v4l2 ioctl: device not present\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -ENODEV;
}
if (dev->state & DEV_MISCONFIGURED) {
em28xx_errdev
("v4l2 ioctl: device is misconfigured; close and open it again\n");
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return -EIO;
}
ret = video_usercopy(inode, filp, cmd, arg, em28xx_video_do_ioctl);
- up(&dev->fileop_lock);
+ mutex_unlock(&dev->fileop_lock);
return ret;
}
@@ -1712,7 +1712,7 @@
dev->udev = udev;
dev->model = model;
- init_MUTEX(&dev->lock);
+ mutex_init(&dev->lock);
init_waitqueue_head(&dev->open);
dev->em28xx_write_regs = em28xx_write_regs;
@@ -1788,7 +1788,7 @@
return -ENOMEM;
}
- down(&dev->lock);
+ mutex_lock(&dev->lock);
/* register i2c bus */
em28xx_i2c_register(dev);
@@ -1798,7 +1798,7 @@
/* configure the device */
em28xx_config_i2c(dev);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
errCode = em28xx_config(dev);
@@ -1849,12 +1849,12 @@
list_add_tail(&dev->devlist,&em28xx_devlist);
/* register v4l2 device */
- down(&dev->lock);
+ mutex_lock(&dev->lock);
if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]))) {
em28xx_errdev("unable to register video device (error=%i).\n",
retval);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
list_del(&dev->devlist);
video_device_release(dev->vdev);
kfree(dev);
@@ -1865,7 +1865,7 @@
if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]) < 0) {
printk("unable to register vbi device\n");
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
list_del(&dev->devlist);
video_device_release(dev->vbi_dev);
video_device_release(dev->vdev);
@@ -1886,7 +1886,7 @@
}
video_mux(dev, 0);
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
dev->vdev->minor-MINOR_VFL_TYPE_GRABBER_MIN,
@@ -2035,7 +2035,7 @@
down_write(&em28xx_disconnect);
- down(&dev->lock);
+ mutex_lock(&dev->lock);
em28xx_info("disconnecting %s\n", dev->vdev->name);
@@ -2057,7 +2057,7 @@
em28xx_release_resources(dev);
}
- up(&dev->lock);
+ mutex_unlock(&dev->lock);
if (!dev->users) {
kfree(dev->alt_max_pkt_size);