blob: 85ea8a8e658ef52641702a614d4d75b4e2857e60 [file] [log] [blame]
/*
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00mac
Abstract: rt2x00 generic mac80211 routines.
*/
/*
* Set enviroment defines for rt2x00.h
*/
#define DRV_NAME "rt2x00lib"
#include <linux/kernel.h>
#include <linux/module.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
struct data_ring *ring,
struct sk_buff *frag_skb,
struct ieee80211_tx_control *control)
{
struct sk_buff *skb;
int size;
if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
size = sizeof(struct ieee80211_cts);
else
size = sizeof(struct ieee80211_rts);
skb = dev_alloc_skb(size + rt2x00dev->hw->extra_tx_headroom);
if (!skb) {
WARNING(rt2x00dev, "Failed to create RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
skb_put(skb, size);
if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id,
frag_skb->data, frag_skb->len, control,
(struct ieee80211_cts *)(skb->data));
else
ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id,
frag_skb->data, frag_skb->len, control,
(struct ieee80211_rts *)(skb->data));
if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) {
WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
return NETDEV_TX_BUSY;
}
return NETDEV_TX_OK;
}
int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_tx_control *control)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
struct data_ring *ring;
u16 frame_control;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
* Note that we can only stop the TX queues inside the TX path
* due to possible race conditions in mac80211.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
return 0;
}
/*
* Determine which ring to put packet on.
*/
ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
if (unlikely(!ring)) {
ERROR(rt2x00dev,
"Attempt to send packet over invalid queue %d.\n"
"Please file bug report to %s.\n",
control->queue, DRV_PROJECT);
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
/*
* If CTS/RTS is required. and this frame is not CTS or RTS,
* create and queue that frame first. But make sure we have
* at least enough entries available to send this CTS/RTS
* frame as well as the data frame.
*/
frame_control = le16_to_cpu(ieee80211hdr->frame_control);
if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) &&
(control->flags & (IEEE80211_TXCTL_USE_RTS_CTS |
IEEE80211_TXCTL_USE_CTS_PROTECT))) {
if (rt2x00_ring_free(ring) <= 1)
return NETDEV_TX_BUSY;
if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control))
return NETDEV_TX_BUSY;
}
if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control))
return NETDEV_TX_BUSY;
if (rt2x00dev->ops->lib->kick_tx_queue)
rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
return NETDEV_TX_OK;
}
EXPORT_SYMBOL_GPL(rt2x00mac_tx);
int rt2x00mac_start(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
int status;
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
test_bit(DEVICE_STARTED, &rt2x00dev->flags))
return 0;
/*
* If this is the first interface which is added,
* we should load the firmware now.
*/
if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
status = rt2x00lib_load_firmware(rt2x00dev);
if (status)
return status;
}
/*
* Initialize the device.
*/
status = rt2x00lib_initialize(rt2x00dev);
if (status)
return status;
/*
* Enable radio.
*/
status = rt2x00lib_enable_radio(rt2x00dev);
if (status) {
rt2x00lib_uninitialize(rt2x00dev);
return status;
}
__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_start);
void rt2x00mac_stop(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return;
/*
* Perhaps we can add something smarter here,
* but for now just disabling the radio should do.
*/
rt2x00lib_disable_radio(rt2x00dev);
__clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
}
EXPORT_SYMBOL_GPL(rt2x00mac_stop);
int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
/* FIXME: Beaconing is broken in rt2x00. */
if (conf->type == IEEE80211_IF_TYPE_IBSS ||
conf->type == IEEE80211_IF_TYPE_AP) {
ERROR(rt2x00dev,
"rt2x00 does not support Adhoc or Master mode");
return -EOPNOTSUPP;
}
/*
* Don't allow interfaces to be added while
* either the device has disappeared or when
* another interface is already present.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
is_interface_present(intf))
return -ENOBUFS;
intf->id = conf->if_id;
intf->type = conf->type;
if (conf->type == IEEE80211_IF_TYPE_AP)
memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
/*
* The MAC adddress must be configured after the device
* has been initialized. Otherwise the device can reset
* the MAC registers.
*/
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_type(rt2x00dev, conf->type);
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_add_interface);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
/*
* Don't allow interfaces to be remove while
* either the device has disappeared or when
* no interface is present.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
!is_interface_present(intf))
return;
intf->id = 0;
intf->type = INVALID_INTERFACE;
memset(&intf->bssid, 0x00, ETH_ALEN);
memset(&intf->mac, 0x00, ETH_ALEN);
/*
* Make sure the bssid and mac address registers
* are cleared to prevent false ACKing of frames.
*/
rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
rt2x00lib_config_type(rt2x00dev, intf->type);
}
EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
* Check if we need to disable the radio,
* if this is not the case, at least the RX must be disabled.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
if (!conf->radio_enabled)
rt2x00lib_disable_radio(rt2x00dev);
else
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
}
rt2x00lib_config(rt2x00dev, conf, 0);
/*
* Reenable RX only if the radio should be on.
*/
if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
else if (conf->radio_enabled)
return rt2x00lib_enable_radio(rt2x00dev);
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_config);
int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
struct ieee80211_if_conf *conf)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct interface *intf = &rt2x00dev->interface;
int status;
/*
* Mac80211 might be calling this function while we are trying
* to remove the device or perhaps suspending it.
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
return 0;
/*
* If the given type does not match the configured type,
* there has been a problem.
*/
if (conf->type != intf->type)
return -EINVAL;
/*
* If the interface does not work in master mode,
* then the bssid value in the interface structure
* should now be set.
*/
if (conf->type != IEEE80211_IF_TYPE_AP)
memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
/*
* We only need to initialize the beacon when master mode is enabled.
*/
if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon)
return 0;
status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
conf->beacon,
conf->beacon_control);
if (status)
dev_kfree_skb(conf->beacon);
return status;
}
EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
int rt2x00mac_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
/*
* The dot11ACKFailureCount, dot11RTSFailureCount and
* dot11RTSSuccessCount are updated in interrupt time.
* dot11FCSErrorCount is updated in the link tuner.
*/
memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats));
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_get_stats);
int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
unsigned int i;
for (i = 0; i < hw->queues; i++)
memcpy(&stats->data[i], &rt2x00dev->tx[i].stats,
sizeof(rt2x00dev->tx[i].stats));
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats);
void rt2x00mac_erp_ie_changed(struct ieee80211_hw *hw, u8 changes,
int cts_protection, int preamble)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
int short_preamble;
int ack_timeout;
int ack_consume_time;
int difs;
/*
* We only support changing preamble mode.
*/
if (!(changes & IEEE80211_ERP_CHANGE_PREAMBLE))
return;
short_preamble = !preamble;
preamble = !!(preamble) ? PREAMBLE : SHORT_PREAMBLE;
difs = (hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
SHORT_DIFS : DIFS;
ack_timeout = difs + PLCP + preamble + get_duration(ACK_SIZE, 10);
ack_consume_time = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
if (short_preamble)
__set_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags);
else
__clear_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags);
rt2x00dev->ops->lib->config_preamble(rt2x00dev, short_preamble,
ack_timeout, ack_consume_time);
}
EXPORT_SYMBOL_GPL(rt2x00mac_erp_ie_changed);
int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
const struct ieee80211_tx_queue_params *params)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct data_ring *ring;
ring = rt2x00lib_get_ring(rt2x00dev, queue);
if (unlikely(!ring))
return -EINVAL;
/*
* The passed variables are stored as real value ((2^n)-1).
* Ralink registers require to know the bit number 'n'.
*/
if (params->cw_min)
ring->tx_params.cw_min = fls(params->cw_min);
else
ring->tx_params.cw_min = 5; /* cw_min: 2^5 = 32. */
if (params->cw_max)
ring->tx_params.cw_max = fls(params->cw_max);
else
ring->tx_params.cw_max = 10; /* cw_min: 2^10 = 1024. */
if (params->aifs)
ring->tx_params.aifs = params->aifs;
else
ring->tx_params.aifs = 2;
INFO(rt2x00dev,
"Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
queue, ring->tx_params.cw_min, ring->tx_params.cw_max,
ring->tx_params.aifs);
return 0;
}
EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);