| What: /sys/bus/iio/devices/deviceX |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Hardware chip or device accessed by on communication port. |
| Corresponds to a grouping of sensor channels. X is the IIO |
| index of the device. |
| |
| What: /sys/bus/iio/devices/triggerX |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| An event driven driver of data capture to an in kernel buffer. |
| May be provided by a device driver that also has an IIO device |
| based on hardware generated events (e.g. data ready) or |
| provided by a separate driver for other hardware (e.g. |
| periodic timer, GPIO or high resolution timer). |
| Contains trigger type specific elements. These do not |
| generalize well and hence are not documented in this file. |
| X is the IIO index of the trigger. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Link to /sys/class/iio/deviceX/deviceX:buffer. X indicates |
| the device with which this buffer buffer is associated. |
| |
| What: /sys/bus/iio/devices/deviceX/name |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Description of the physical chip / device for device X. |
| Typically a part number. |
| |
| What: /sys/bus/iio/devices/deviceX/sampling_frequency |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Some devices have internal clocks. This parameter sets the |
| resulting sampling frequency. In many devices this |
| parameter has an effect on input filters etc rather than |
| simply controlling when the input is sampled. As this |
| effects datardy triggers, hardware buffers and the sysfs |
| direct access interfaces, it may be found in any of the |
| relevant directories. If it effects all of the above |
| then it is to be found in the base device directory as here. |
| |
| What: /sys/bus/iio/devices/deviceX/sampling_frequency_available |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| When the internal sampling clock can only take a small |
| discrete set of values, this file lists those available. |
| |
| What: /sys/bus/iio/devices/deviceX/inY_raw |
| What: /sys/bus/iio/devices/deviceX/inY_supply_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled no bias removal etc) voltage measurement from |
| channel Y. In special cases where the channel does not |
| correspond to externally available input one of the named |
| versions may be used. The number must always be specified and |
| unique to allow association with event codes. |
| |
| What: /sys/bus/iio/devices/deviceX/inY-inZ_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled) differential voltage measurement equivalent to |
| channel Y - channel Z where these channel numbers apply to the |
| physically equivalent inputs when non differential readings are |
| separately available. In differential only parts, then all that |
| is required is a consistent labeling. |
| |
| What: /sys/bus/iio/devices/deviceX/temp_raw |
| What: /sys/bus/iio/devices/deviceX/temp_x_raw |
| What: /sys/bus/iio/devices/deviceX/temp_y_raw |
| What: /sys/bus/iio/devices/deviceX/temp_z_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled no bias removal etc) temperature measurement. |
| It an axis is specified it generally means that the temperature |
| sensor is associated with one part of a compound device (e.g. |
| a gyroscope axis). |
| |
| What: /sys/bus/iio/devices/deviceX/accel_x_raw |
| What: /sys/bus/iio/devices/deviceX/accel_y_raw |
| What: /sys/bus/iio/devices/deviceX/accel_z_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Acceleration in direction x, y or z (may be arbitrarily assigned |
| but should match other such assignments on device) |
| channel m (not present if only one accelerometer channel at |
| this orientation). Has all of the equivalent parameters as per |
| inY. Units after application of scale and offset are m/s^2. |
| |
| What: /sys/bus/iio/devices/deviceX/gyro_x_raw |
| What: /sys/bus/iio/devices/deviceX/gyro_y_raw |
| What: /sys/bus/iio/devices/deviceX/gyro_z_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Angular velocity about axis x, y or z (may be arbitrarily |
| assigned) Data converted by application of offset then scale to |
| radians per second. Has all the equivalent parameters as |
| per inY. |
| |
| What: /sys/bus/iio/devices/deviceX/incli_x_raw |
| What: /sys/bus/iio/devices/deviceX/incli_y_raw |
| What: /sys/bus/iio/devices/deviceX/incli_z_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Inclination raw reading about axis x, y or z (may be |
| arbitrarily assigned). Data converted by application of offset |
| and scale to Degrees. |
| |
| What: /sys/bus/iio/devices/deviceX/magn_x_raw |
| What: /sys/bus/iio/devices/deviceX/magn_y_raw |
| What: /sys/bus/iio/devices/deviceX/magn_z_raw |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Magnetic field along axis x, y or z (may be arbitrarily |
| assigned) channel m (not present if only one magnetometer |
| at this orientation). Data converted by application of |
| offset then scale to Gauss. Has all the equivalent modifiers |
| as per inY. |
| |
| What: /sys/bus/iio/devices/deviceX/accel_x_peak_raw |
| What: /sys/bus/iio/devices/deviceX/accel_y_peak_raw |
| What: /sys/bus/iio/devices/deviceX/accel_z_peak_raw |
| KernelVersion: 2.6.36 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Some devices provide a store of the highest value seen since |
| some reset condition. These attributes allow access to this |
| and are otherwise the direct equivalent of the |
| <type>Y[_name]_raw attributes. |
| |
| What: /sys/bus/iio/devices/deviceX/accel_xyz_squared_peak_raw |
| KernelVersion: 2.6.36 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| A computed peak value based on the sum squared magnitude of |
| the underlying value in the specified directions. |
| |
| What: /sys/bus/iio/devices/deviceX/accel_offset |
| What: /sys/bus/iio/devices/deviceX/temp_offset |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| If known for a device, offset to be added to <type>[Y]_raw prior |
| to scaling by <type>[Y]_scale in order to obtain value in the |
| <type> units as specified in <type>[y]_raw documentation. |
| Not present if the offset is always 0 or unknown. If Y is not |
| present, then the offset applies to all in channels of <type>. |
| May be writable if a variable offset can be applied on the |
| device. Note that this is different to calibbias which |
| is for devices (or drivers) that apply offsets to compensate |
| for variation between different instances of the part, typically |
| adjusted by using some hardware supported calibration procedure. |
| |
| What: /sys/bus/iio/devices/deviceX/inY_scale |
| What: /sys/bus/iio/devices/deviceX/inY_supply_scale |
| What: /sys/bus/iio/devices/deviceX/in_scale |
| What: /sys/bus/iio/devices/deviceX/outY_scale |
| What: /sys/bus/iio/devices/deviceX/accel_scale |
| What: /sys/bus/iio/devices/deviceX/accel_peak_scale |
| What: /sys/bus/iio/devices/deviceX/gyro_scale |
| What: /sys/bus/iio/devices/deviceX/magn_scale |
| What: /sys/bus/iio/devices/deviceX/magn_x_scale |
| What: /sys/bus/iio/devices/deviceX/magn_y_scale |
| What: /sys/bus/iio/devices/deviceX/magn_z_scale |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| If known for a device, scale to be applied to <type>Y[_name]_raw |
| post addition of <type>[Y][_name]_offset in order to obtain the |
| measured value in <type> units as specified in |
| <type>[Y][_name]_raw documentation.. If shared across all in |
| channels then Y is not present and the value is called |
| <type>[Y][_name]_scale. The peak modifier means this value |
| is applied to <type>Y[_name]_peak_raw values. |
| |
| What: /sys/bus/iio/devices/deviceX/accel_x_calibbias |
| What: /sys/bus/iio/devices/deviceX/accel_y_calibbias |
| What: /sys/bus/iio/devices/deviceX/accel_z_calibbias |
| What: /sys/bus/iio/devices/deviceX/gyro_x_calibbias |
| What: /sys/bus/iio/devices/deviceX/gyro_y_calibbias |
| What: /sys/bus/iio/devices/deviceX/gyro_z_calibbias |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Hardware applied calibration offset. (assumed to fix production |
| inaccuracies). If shared across all channels, <type>_calibbias |
| is used. |
| |
| What /sys/bus/iio/devices/deviceX/inY_calibscale |
| What /sys/bus/iio/devices/deviceX/inY_supply_calibscale |
| What /sys/bus/iio/devices/deviceX/in_calibscale |
| What /sys/bus/iio/devices/deviceX/accel_x_calibscale |
| What /sys/bus/iio/devices/deviceX/accel_y_calibscale |
| What /sys/bus/iio/devices/deviceX/accel_z_calibscale |
| What /sys/bus/iio/devices/deviceX/gyro_x_calibscale |
| What /sys/bus/iio/devices/deviceX/gyro_y_calibscale |
| What /sys/bus/iio/devices/deviceX/gyro_z_calibscale |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Hardware applied calibration scale factor. (assumed to fix |
| production inaccuracies). If shared across all channels, |
| <type>_calibscale is used. |
| |
| What: /sys/bus/iio/devices/deviceX/accel_scale_available |
| KernelVersion: 2.635 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| If a discrete set of scale values are available, they |
| are listed in this attribute. |
| |
| What: /sys/bus/iio/devices/deviceX/outY_raw |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled, no bias etc.) output voltage for |
| channel Y. The number must always be specified and |
| unique if the output corresponds to a single channel. |
| |
| What: /sys/bus/iio/devices/deviceX/outY&Z_raw |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled, no bias etc.) output voltage for an aggregate of |
| channel Y, channel Z, etc. This interface is available in cases |
| where a single output sets the value for multiple channels |
| simultaneously. |
| |
| What: /sys/bus/iio/devices/deviceX/deviceX:eventY |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Configuration of which hardware generated events are passed up |
| to user-space. |
| |
| What: /sys/bus/iio/devices/deviceX:event/dev |
| What: /sys/bus/iio/devices/deviceX:eventY/dev |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| major:minor character device numbers for the event line Y of |
| device X. |
| |
| What: /sys/.../deviceX:eventY/accel_x_thresh_rising_en |
| What: /sys/.../deviceX:eventY/accel_x_thresh_falling_en |
| What: /sys/.../deviceX:eventY/accel_y_thresh_rising_en |
| What: /sys/.../deviceX:eventY/accel_y_thresh_falling_en |
| What: /sys/.../deviceX:eventY/accel_z_thresh_rising_en |
| What: /sys/.../deviceX:eventY/accel_z_thresh_falling_en |
| What: /sys/.../deviceX:eventY/gyro_x_thresh_rising_en |
| What: /sys/.../deviceX:eventY/gyro_x_thresh_falling_en |
| What: /sys/.../deviceX:eventY/gyro_y_thresh_rising_en |
| What: /sys/.../deviceX:eventY/gyro_y_thresh_falling_en |
| What: /sys/.../deviceX:eventY/gyro_z_thresh_rising_en |
| What: /sys/.../deviceX:eventY/gyro_z_thresh_falling_en |
| What: /sys/.../deviceX:eventY/magn_x_thresh_rising_en |
| What: /sys/.../deviceX:eventY/magn_x_thresh_falling_en |
| What: /sys/.../deviceX:eventY/magn_y_thresh_rising_en |
| What: /sys/.../deviceX:eventY/magn_y_thresh_falling_en |
| What: /sys/.../deviceX:eventY/magn_z_thresh_rising_en |
| What: /sys/.../deviceX:eventY/magn_z_thresh_falling_en |
| What: /sys/.../deviceX:eventY/inZ_supply_thresh_rising_en |
| What: /sys/.../deviceX:eventY/inZ_supply_thresh_falling_en |
| What: /sys/.../deviceX:eventY/inZ_thresh_rising_en |
| What: /sys/.../deviceX:eventY/inZ_thresh_falling_en |
| What: /sys/.../deviceX:eventY/temp_thresh_rising_en |
| What: /sys/.../deviceX:eventY/temp_thresh_falling_en |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Event generated when channel passes a threshold in the specified |
| (_rising|_falling) direction. If the direction is not specified, |
| then either the device will report an event which ever direction |
| a single threshold value is called in (e.g. |
| <type>[Z][_name]_<raw|input>_thresh_value) or |
| <type>[Z][_name]_<raw|input>_thresh_rising_value and |
| <type>[Z][_name]_<raw|input>_thresh_falling_value may take |
| different values, but the device can only enable both thresholds |
| or neither. |
| Note the driver will assume the last p events requested are |
| to be enabled where p is however many it supports (which may |
| vary depending on the exact set requested. So if you want to be |
| sure you have set what you think you have, check the contents of |
| these attributes after everything is configured. Drivers may |
| have to buffer any parameters so that they are consistent when |
| a given event type is enabled a future point (and not those for |
| whatever event was previously enabled). |
| |
| What: /sys/.../deviceX:eventY/accel_x_roc_rising_en |
| What: /sys/.../deviceX:eventY/accel_x_roc_falling_en |
| What: /sys/.../deviceX:eventY/accel_y_roc_rising_en |
| What: /sys/.../deviceX:eventY/accel_y_roc_falling_en |
| What: /sys/.../deviceX:eventY/accel_z_roc_rising_en |
| What: /sys/.../deviceX:eventY/accel_z_roc_falling_en |
| What: /sys/.../deviceX:eventY/gyro_x_roc_rising_en |
| What: /sys/.../deviceX:eventY/gyro_x_roc_falling_en |
| What: /sys/.../deviceX:eventY/gyro_y_roc_rising_en |
| What: /sys/.../deviceX:eventY/gyro_y_roc_falling_en |
| What: /sys/.../deviceX:eventY/gyro_z_roc_rising_en |
| What: /sys/.../deviceX:eventY/gyro_z_roc_falling_en |
| What: /sys/.../deviceX:eventY/magn_x_roc_rising_en |
| What: /sys/.../deviceX:eventY/magn_x_roc_falling_en |
| What: /sys/.../deviceX:eventY/magn_y_roc_rising_en |
| What: /sys/.../deviceX:eventY/magn_y_roc_falling_en |
| What: /sys/.../deviceX:eventY/magn_z_roc_rising_en |
| What: /sys/.../deviceX:eventY/magn_z_roc_falling_en |
| What: /sys/.../deviceX:eventY/inZ_supply_roc_rising_en |
| What: /sys/.../deviceX:eventY/inZ_supply_roc_falling_en |
| What: /sys/.../deviceX:eventY/inZ_roc_rising_en |
| What: /sys/.../deviceX:eventY/inZ_roc_falling_en |
| What: /sys/.../deviceX:eventY/temp_roc_rising_en |
| What: /sys/.../deviceX:eventY/temp_roc_falling_en |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Event generated when channel passes a threshold on the rate of |
| change (1st differential) in the specified (_rising|_falling) |
| direction. If the direction is not specified, then either the |
| device will report an event which ever direction a single |
| threshold value is called in (e.g. |
| <type>[Z][_name]_<raw|input>_roc_value) or |
| <type>[Z][_name]_<raw|input>_roc_rising_value and |
| <type>[Z][_name]_<raw|input>_roc_falling_value may take |
| different values, but the device can only enable both rate of |
| change thresholds or neither. |
| Note the driver will assume the last p events requested are |
| to be enabled where p is however many it supports (which may |
| vary depending on the exact set requested. So if you want to be |
| sure you have set what you think you have, check the contents of |
| these attributes after everything is configured. Drivers may |
| have to buffer any parameters so that they are consistent when |
| a given event type is enabled a future point (and not those for |
| whatever event was previously enabled). |
| |
| What: /sys/.../deviceX:eventY/accel_x_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/accel_x_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/accel_y_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/accel_y_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/accel_z_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/accel_z_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/gyro_x_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/gyro_x_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/gyro_y_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/gyro_y_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/gyro_z_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/gyro_z_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/magn_x_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/magn_x_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/magn_y_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/magn_y_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/magn_z_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/magn_z_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/inZ_supply_raw_thresh_rising_value |
| What: /sys/.../deviceX:eventY/inZ_supply_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/inZ_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/inZ_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/temp_raw_thresh_falling_value |
| What: /sys/.../deviceX:eventY/temp_raw_thresh_falling_value |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Specifies the value of threshold that the device is comparing |
| against for the events enabled by |
| <type>Z[_name]_thresh[_rising|falling]_en. |
| If separate attributes exist for the two directions, but |
| direction is not specified for this attribute, then a single |
| threshold value applies to both directions. |
| The raw or input element of the name indicates whether the |
| value is in raw device units or in processed units (as _raw |
| and _input do on sysfs direct channel read attributes). |
| |
| What: /sys/.../deviceX:eventY/accel_x_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/accel_x_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/accel_y_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/accel_y_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/accel_z_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/accel_z_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/gyro_x_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/gyro_x_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/gyro_y_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/gyro_y_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/gyro_z_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/gyro_z_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/magn_x_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/magn_x_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/magn_y_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/magn_y_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/magn_z_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/magn_z_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/inZ_supply_raw_roc_rising_value |
| What: /sys/.../deviceX:eventY/inZ_supply_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/inZ_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/inZ_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/temp_raw_roc_falling_value |
| What: /sys/.../deviceX:eventY/temp_raw_roc_falling_value |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Specifies the value of rate of change threshold that the |
| device is comparing against for the events enabled by |
| <type>[Z][_name]_roc[_rising|falling]_en. |
| If separate attributes exist for the two directions, |
| but direction is not specified for this attribute, |
| then a single threshold value applies to both directions. |
| The raw or input element of the name indicates whether the |
| value is in raw device units or in processed units (as _raw |
| and _input do on sysfs direct channel read attributes). |
| |
| What: /sys/.../deviceX:eventY/accel_x_thresh_rising_period |
| What: /sys/.../deviceX:eventY/accel_x_thresh_falling_period |
| hat: /sys/.../deviceX:eventY/accel_x_roc_rising_period |
| What: /sys/.../deviceX:eventY/accel_x_roc_falling_period |
| What: /sys/.../deviceX:eventY/accel_y_thresh_rising_period |
| What: /sys/.../deviceX:eventY/accel_y_thresh_falling_period |
| What: /sys/.../deviceX:eventY/accel_y_roc_rising_period |
| What: /sys/.../deviceX:eventY/accel_y_roc_falling_period |
| What: /sys/.../deviceX:eventY/accel_z_thresh_rising_period |
| What: /sys/.../deviceX:eventY/accel_z_thresh_falling_period |
| What: /sys/.../deviceX:eventY/accel_z_roc_rising_period |
| What: /sys/.../deviceX:eventY/accel_z_roc_falling_period |
| What: /sys/.../deviceX:eventY/gyro_x_thresh_rising_period |
| What: /sys/.../deviceX:eventY/gyro_x_thresh_falling_period |
| What: /sys/.../deviceX:eventY/gyro_x_roc_rising_period |
| What: /sys/.../deviceX:eventY/gyro_x_roc_falling_period |
| What: /sys/.../deviceX:eventY/gyro_y_thresh_rising_period |
| What: /sys/.../deviceX:eventY/gyro_y_thresh_falling_period |
| What: /sys/.../deviceX:eventY/gyro_y_roc_rising_period |
| What: /sys/.../deviceX:eventY/gyro_y_roc_falling_period |
| What: /sys/.../deviceX:eventY/gyro_z_thresh_rising_period |
| What: /sys/.../deviceX:eventY/gyro_z_thresh_falling_period |
| What: /sys/.../deviceX:eventY/gyro_z_roc_rising_period |
| What: /sys/.../deviceX:eventY/gyro_z_roc_falling_period |
| What: /sys/.../deviceX:eventY/magn_x_thresh_rising_period |
| What: /sys/.../deviceX:eventY/magn_x_thresh_falling_period |
| What: /sys/.../deviceX:eventY/magn_x_roc_rising_period |
| What: /sys/.../deviceX:eventY/magn_x_roc_falling_period |
| What: /sys/.../deviceX:eventY/magn_y_thresh_rising_period |
| What: /sys/.../deviceX:eventY/magn_y_thresh_falling_period |
| What: /sys/.../deviceX:eventY/magn_y_roc_rising_period |
| What: /sys/.../deviceX:eventY/magn_y_roc_falling_period |
| What: /sys/.../deviceX:eventY/magn_z_thresh_rising_period |
| What: /sys/.../deviceX:eventY/magn_z_thresh_falling_period |
| What: /sys/.../deviceX:eventY/magn_z_roc_rising_period |
| What: /sys/.../deviceX:eventY/magn_z_roc_falling_period |
| What: /sys/.../deviceX:eventY/inZ_supply_thresh_rising_period |
| What: /sys/.../deviceX:eventY/inZ_supply_thresh_falling_period |
| What: /sys/.../deviceX:eventY/inz_supply_roc_rising_period |
| What: /sys/.../deviceX:eventY/inZ_supply_roc_falling_period |
| What: /sys/.../deviceX:eventY/inZ_thresh_rising_period |
| What: /sys/.../deviceX:eventY/inZ_thresh_falling_period |
| What: /sys/.../deviceX:eventY/inZ_roc_rising_period |
| What: /sys/.../deviceX:eventY/inZ_roc_falling_period |
| What: /sys/.../deviceX:eventY/temp_thresh_rising_period |
| What: /sys/.../deviceX:eventY/temp_thresh_falling_period |
| What: /sys/.../deviceX:eventY/temp_roc_rising_period |
| What: /sys/.../deviceX:eventY/temp_roc_falling_period |
| What: /sys/.../deviceX:eventY/accel_x&y&z_mag_falling_period |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Period of time (in seconds) for which the condition must be |
| met before an event is generated. If direction is not |
| specified then this period applies to both directions. |
| |
| What: /sys/.../deviceX:eventY/accel_mag_en |
| What: /sys/.../deviceX:eventY/accel_mag_rising_en |
| What: /sys/.../deviceX:eventY/accel_mag_falling_en |
| What: /sys/.../deviceX:eventY/accel_x_mag_en |
| What: /sys/.../deviceX:eventY/accel_x_mag_rising_en |
| What: /sys/.../deviceX:eventY/accel_x_mag_falling_en |
| What: /sys/.../deviceX:eventY/accel_y_mag_en |
| What: /sys/.../deviceX:eventY/accel_y_mag_rising_en |
| What: /sys/.../deviceX:eventY/accel_y_mag_falling_en |
| What: /sys/.../deviceX:eventY/accel_z_mag_en |
| What: /sys/.../deviceX:eventY/accel_z_mag_rising_en |
| What: /sys/.../deviceX:eventY/accel_z_mag_falling_en |
| What: /sys/.../deviceX:eventY/accel_x&y&z_mag_rising_en |
| What: /sys/.../deviceX:eventY/accel_x&y&z_mag_falling_en |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Similar to accel_x_thresh[_rising|_falling]_en, but here the |
| magnitude of the channel is compared to the threshold, not its |
| signed value. |
| |
| What: /sys/.../accel_raw_mag_value |
| What: /sys/.../accel_x_raw_mag_rising_value |
| What: /sys/.../accel_y_raw_mag_rising_value |
| What: /sys/.../accel_z_raw_mag_rising_value |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| The value to which the magnitude of the channel is compared. If |
| number or direction is not specified, applies to all channels of |
| this type. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer:event/dev |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Buffer for device X event character device major:minor numbers. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer:access/dev |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Buffer for device X access character device major:minor numbers. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/trigger |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| The name of the trigger source being used, as per string given |
| in /sys/class/iio/triggerY/name. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/length |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Number of scans contained by the buffer. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/bytes_per_datum |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Bytes per scan. Due to alignment fun, the scan may be larger |
| than implied directly by the scan_element parameters. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/enable |
| KernelVersion: 2.6.35 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Actually start the buffer capture up. Will start trigger |
| if first device and appropriate. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Directory containing interfaces for elements that will be |
| captured for a single triggered sample set in the buffer. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_x_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_y_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_z_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_x_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_y_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_z_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_x_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_y_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_z_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/timestamp_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/inY_supply_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/inY_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/inY-inZ_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/incli_x_en |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/incli_y_en |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Scan element control for triggered data capture. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_type |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_type |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_type |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/incli_type |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/inY_type |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/in-in_type |
| What: /sys/.../deviceX:buffer/scan_elements/inY_supply_type |
| What: /sys/.../deviceX:buffer/scan_elements/timestamp_type |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Description of the scan element data storage within the buffer |
| and hence the form in which it is read from user-space. |
| Form is [s|u]bits/storagebits[>>shift]. s or u specifies if |
| signed (2's complement) or unsigned. bits is the number of bits |
| of data and storagebits is the space (after padding) that it |
| occupies in the buffer. shift if specified, is the shift that |
| needs to be applied prior to masking out unused bits. Some |
| devices put their data in the middle of the transferred elements |
| with additional information on both sides. Note that some |
| devices will have additional information in the unused bits |
| so to get a clean value, the bits value must be used to mask |
| the buffer output value appropriately. The storagebits value |
| also specifies the data alignment. So s48/64>>2 will be a |
| signed 48 bit integer stored in a 64 bit location aligned to |
| a a64 bit boundary. To obtain the clean value, shift right 2 |
| and apply a mask to zero the top 16 bits of the result. |
| For other storage combinations this attribute will be extended |
| appropriately. |
| |
| What: /sys/.../deviceX:buffer/scan_elements/accel_type_available |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| If the type parameter can take one of a small set of values, |
| this attribute lists them. |
| |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/inY_index |
| What: /sys/.../deviceX:buffer/scan_elements/inY_supply_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_x_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_y_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/accel_z_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_x_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_y_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/gyro_z_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_x_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_y_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/magn_z_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/incli_x_index |
| What: /sys/bus/iio/devices/deviceX:buffer/scan_elements/incli_y_index |
| What: /sys/.../deviceX:buffer/scan_elements/timestamp_index |
| KernelVersion: 2.6.37 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| A single positive integer specifying the position of this |
| scan element in the buffer. Note these are not dependent on |
| what is enabled and may not be contiguous. Thus for user-space |
| to establish the full layout these must be used in conjunction |
| with all _en attributes to establish which channels are present, |
| and the relevant _type attributes to establish the data storage |
| format. |