| /* |
| * Copyright (c) 2012-2014 NVIDIA CORPORATION. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/clkdev.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/delay.h> |
| #include <linux/export.h> |
| #include <linux/clk/tegra.h> |
| #include <dt-bindings/clock/tegra210-car.h> |
| |
| #include "clk.h" |
| #include "clk-id.h" |
| |
| /* |
| * TEGRA210_CAR_BANK_COUNT: the number of peripheral clock register |
| * banks present in the Tegra210 CAR IP block. The banks are |
| * identified by single letters, e.g.: L, H, U, V, W, X, Y. See |
| * periph_regs[] in drivers/clk/tegra/clk.c |
| */ |
| #define TEGRA210_CAR_BANK_COUNT 7 |
| |
| #define CLK_SOURCE_CSITE 0x1d4 |
| #define CLK_SOURCE_EMC 0x19c |
| |
| #define PLLC_BASE 0x80 |
| #define PLLC_OUT 0x84 |
| #define PLLC_MISC0 0x88 |
| #define PLLC_MISC1 0x8c |
| #define PLLC_MISC2 0x5d0 |
| #define PLLC_MISC3 0x5d4 |
| |
| #define PLLC2_BASE 0x4e8 |
| #define PLLC2_MISC0 0x4ec |
| #define PLLC2_MISC1 0x4f0 |
| #define PLLC2_MISC2 0x4f4 |
| #define PLLC2_MISC3 0x4f8 |
| |
| #define PLLC3_BASE 0x4fc |
| #define PLLC3_MISC0 0x500 |
| #define PLLC3_MISC1 0x504 |
| #define PLLC3_MISC2 0x508 |
| #define PLLC3_MISC3 0x50c |
| |
| #define PLLM_BASE 0x90 |
| #define PLLM_MISC0 0x9c |
| #define PLLM_MISC1 0x98 |
| #define PLLP_BASE 0xa0 |
| #define PLLP_MISC0 0xac |
| #define PLLP_MISC1 0x680 |
| #define PLLA_BASE 0xb0 |
| #define PLLA_MISC0 0xbc |
| #define PLLA_MISC1 0xb8 |
| #define PLLA_MISC2 0x5d8 |
| #define PLLD_BASE 0xd0 |
| #define PLLD_MISC0 0xdc |
| #define PLLD_MISC1 0xd8 |
| #define PLLU_BASE 0xc0 |
| #define PLLU_OUTA 0xc4 |
| #define PLLU_MISC0 0xcc |
| #define PLLU_MISC1 0xc8 |
| #define PLLX_BASE 0xe0 |
| #define PLLX_MISC0 0xe4 |
| #define PLLX_MISC1 0x510 |
| #define PLLX_MISC2 0x514 |
| #define PLLX_MISC3 0x518 |
| #define PLLX_MISC4 0x5f0 |
| #define PLLX_MISC5 0x5f4 |
| #define PLLE_BASE 0xe8 |
| #define PLLE_MISC0 0xec |
| #define PLLD2_BASE 0x4b8 |
| #define PLLD2_MISC0 0x4bc |
| #define PLLD2_MISC1 0x570 |
| #define PLLD2_MISC2 0x574 |
| #define PLLD2_MISC3 0x578 |
| #define PLLE_AUX 0x48c |
| #define PLLRE_BASE 0x4c4 |
| #define PLLRE_MISC0 0x4c8 |
| #define PLLDP_BASE 0x590 |
| #define PLLDP_MISC 0x594 |
| |
| #define PLLC4_BASE 0x5a4 |
| #define PLLC4_MISC0 0x5a8 |
| #define PLLC4_OUT 0x5e4 |
| #define PLLMB_BASE 0x5e8 |
| #define PLLMB_MISC0 0x5ec |
| #define PLLA1_BASE 0x6a4 |
| #define PLLA1_MISC0 0x6a8 |
| #define PLLA1_MISC1 0x6ac |
| #define PLLA1_MISC2 0x6b0 |
| #define PLLA1_MISC3 0x6b4 |
| |
| #define PLLU_IDDQ_BIT 31 |
| #define PLLCX_IDDQ_BIT 27 |
| #define PLLRE_IDDQ_BIT 24 |
| #define PLLA_IDDQ_BIT 25 |
| #define PLLD_IDDQ_BIT 20 |
| #define PLLSS_IDDQ_BIT 18 |
| #define PLLM_IDDQ_BIT 5 |
| #define PLLMB_IDDQ_BIT 17 |
| #define PLLXP_IDDQ_BIT 3 |
| |
| #define PLLCX_RESET_BIT 30 |
| |
| #define PLL_BASE_LOCK BIT(27) |
| #define PLLCX_BASE_LOCK BIT(26) |
| #define PLLE_MISC_LOCK BIT(11) |
| #define PLLRE_MISC_LOCK BIT(27) |
| |
| #define PLL_MISC_LOCK_ENABLE 18 |
| #define PLLC_MISC_LOCK_ENABLE 24 |
| #define PLLDU_MISC_LOCK_ENABLE 22 |
| #define PLLU_MISC_LOCK_ENABLE 29 |
| #define PLLE_MISC_LOCK_ENABLE 9 |
| #define PLLRE_MISC_LOCK_ENABLE 30 |
| #define PLLSS_MISC_LOCK_ENABLE 30 |
| #define PLLP_MISC_LOCK_ENABLE 18 |
| #define PLLM_MISC_LOCK_ENABLE 4 |
| #define PLLMB_MISC_LOCK_ENABLE 16 |
| #define PLLA_MISC_LOCK_ENABLE 28 |
| #define PLLU_MISC_LOCK_ENABLE 29 |
| #define PLLD_MISC_LOCK_ENABLE 18 |
| |
| #define PLLA_SDM_DIN_MASK 0xffff |
| #define PLLA_SDM_EN_MASK BIT(26) |
| |
| #define PLLD_SDM_EN_MASK BIT(16) |
| |
| #define PLLD2_SDM_EN_MASK BIT(31) |
| #define PLLD2_SSC_EN_MASK BIT(30) |
| |
| #define PLLDP_SS_CFG 0x598 |
| #define PLLDP_SDM_EN_MASK BIT(31) |
| #define PLLDP_SSC_EN_MASK BIT(30) |
| #define PLLDP_SS_CTRL1 0x59c |
| #define PLLDP_SS_CTRL2 0x5a0 |
| |
| #define PMC_PLLM_WB0_OVERRIDE 0x1dc |
| #define PMC_PLLM_WB0_OVERRIDE_2 0x2b0 |
| |
| #define UTMIP_PLL_CFG2 0x488 |
| #define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6) |
| #define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24) |
| #define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25) |
| |
| #define UTMIP_PLL_CFG1 0x484 |
| #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) |
| #define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) |
| #define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17) |
| #define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16) |
| #define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15) |
| #define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14) |
| #define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12) |
| |
| #define UTMIPLL_HW_PWRDN_CFG0 0x52c |
| #define UTMIPLL_HW_PWRDN_CFG0_UTMIPLL_LOCK BIT(31) |
| #define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25) |
| #define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) |
| #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(7) |
| #define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) |
| #define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5) |
| #define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4) |
| #define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) |
| #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1) |
| #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0) |
| |
| #define PLLU_HW_PWRDN_CFG0 0x530 |
| #define PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE BIT(28) |
| #define PLLU_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24) |
| #define PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT BIT(7) |
| #define PLLU_HW_PWRDN_CFG0_USE_LOCKDET BIT(6) |
| #define PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2) |
| #define PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL BIT(0) |
| |
| #define XUSB_PLL_CFG0 0x534 |
| #define XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY 0x3ff |
| #define XUSB_PLL_CFG0_PLLU_LOCK_DLY_MASK (0x3ff << 14) |
| |
| #define SPARE_REG0 0x55c |
| #define CLK_M_DIVISOR_SHIFT 2 |
| #define CLK_M_DIVISOR_MASK 0x3 |
| |
| /* |
| * SDM fractional divisor is 16-bit 2's complement signed number within |
| * (-2^12 ... 2^12-1) range. Represented in PLL data structure as unsigned |
| * 16-bit value, with "0" divisor mapped to 0xFFFF. Data "0" is used to |
| * indicate that SDM is disabled. |
| * |
| * Effective ndiv value when SDM is enabled: ndiv + 1/2 + sdm_din/2^13 |
| */ |
| #define PLL_SDM_COEFF BIT(13) |
| #define sdin_din_to_data(din) ((u16)((din) ? : 0xFFFFU)) |
| #define sdin_data_to_din(dat) (((dat) == 0xFFFFU) ? 0 : (s16)dat) |
| |
| /* Tegra CPU clock and reset control regs */ |
| #define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 |
| |
| #ifdef CONFIG_PM_SLEEP |
| static struct cpu_clk_suspend_context { |
| u32 clk_csite_src; |
| } tegra210_cpu_clk_sctx; |
| #endif |
| |
| static void __iomem *clk_base; |
| static void __iomem *pmc_base; |
| |
| static unsigned long osc_freq; |
| static unsigned long pll_ref_freq; |
| |
| static DEFINE_SPINLOCK(pll_d_lock); |
| static DEFINE_SPINLOCK(pll_e_lock); |
| static DEFINE_SPINLOCK(pll_re_lock); |
| static DEFINE_SPINLOCK(pll_u_lock); |
| static DEFINE_SPINLOCK(emc_lock); |
| |
| /* possible OSC frequencies in Hz */ |
| static unsigned long tegra210_input_freq[] = { |
| [5] = 38400000, |
| [8] = 12000000, |
| }; |
| |
| static const char *mux_pllmcp_clkm[] = { |
| "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_c2", "pll_c3", |
| }; |
| #define mux_pllmcp_clkm_idx NULL |
| |
| #define PLL_ENABLE (1 << 30) |
| |
| #define PLLCX_MISC1_IDDQ (1 << 27) |
| #define PLLCX_MISC0_RESET (1 << 30) |
| |
| #define PLLCX_MISC0_DEFAULT_VALUE 0x40080000 |
| #define PLLCX_MISC0_WRITE_MASK 0x400ffffb |
| #define PLLCX_MISC1_DEFAULT_VALUE 0x08000000 |
| #define PLLCX_MISC1_WRITE_MASK 0x08003cff |
| #define PLLCX_MISC2_DEFAULT_VALUE 0x1f720f05 |
| #define PLLCX_MISC2_WRITE_MASK 0xffffff17 |
| #define PLLCX_MISC3_DEFAULT_VALUE 0x000000c4 |
| #define PLLCX_MISC3_WRITE_MASK 0x00ffffff |
| |
| /* PLLA */ |
| #define PLLA_BASE_IDDQ (1 << 25) |
| #define PLLA_BASE_LOCK (1 << 27) |
| |
| #define PLLA_MISC0_LOCK_ENABLE (1 << 28) |
| #define PLLA_MISC0_LOCK_OVERRIDE (1 << 27) |
| |
| #define PLLA_MISC2_EN_SDM (1 << 26) |
| #define PLLA_MISC2_EN_DYNRAMP (1 << 25) |
| |
| #define PLLA_MISC0_DEFAULT_VALUE 0x12000020 |
| #define PLLA_MISC0_WRITE_MASK 0x7fffffff |
| #define PLLA_MISC2_DEFAULT_VALUE 0x0 |
| #define PLLA_MISC2_WRITE_MASK 0x06ffffff |
| |
| /* PLLD */ |
| #define PLLD_MISC0_EN_SDM (1 << 16) |
| #define PLLD_MISC0_LOCK_OVERRIDE (1 << 17) |
| #define PLLD_MISC0_LOCK_ENABLE (1 << 18) |
| #define PLLD_MISC0_IDDQ (1 << 20) |
| #define PLLD_MISC0_DSI_CLKENABLE (1 << 21) |
| |
| #define PLLD_MISC0_DEFAULT_VALUE 0x00140000 |
| #define PLLD_MISC0_WRITE_MASK 0x3ff7ffff |
| #define PLLD_MISC1_DEFAULT_VALUE 0x20 |
| #define PLLD_MISC1_WRITE_MASK 0x00ffffff |
| |
| /* PLLD2 and PLLDP and PLLC4 */ |
| #define PLLDSS_BASE_LOCK (1 << 27) |
| #define PLLDSS_BASE_LOCK_OVERRIDE (1 << 24) |
| #define PLLDSS_BASE_IDDQ (1 << 18) |
| #define PLLDSS_BASE_REF_SEL_SHIFT 25 |
| #define PLLDSS_BASE_REF_SEL_MASK (0x3 << PLLDSS_BASE_REF_SEL_SHIFT) |
| |
| #define PLLDSS_MISC0_LOCK_ENABLE (1 << 30) |
| |
| #define PLLDSS_MISC1_CFG_EN_SDM (1 << 31) |
| #define PLLDSS_MISC1_CFG_EN_SSC (1 << 30) |
| |
| #define PLLD2_MISC0_DEFAULT_VALUE 0x40000020 |
| #define PLLD2_MISC1_CFG_DEFAULT_VALUE 0x10000000 |
| #define PLLD2_MISC2_CTRL1_DEFAULT_VALUE 0x0 |
| #define PLLD2_MISC3_CTRL2_DEFAULT_VALUE 0x0 |
| |
| #define PLLDP_MISC0_DEFAULT_VALUE 0x40000020 |
| #define PLLDP_MISC1_CFG_DEFAULT_VALUE 0xc0000000 |
| #define PLLDP_MISC2_CTRL1_DEFAULT_VALUE 0xf400f0da |
| #define PLLDP_MISC3_CTRL2_DEFAULT_VALUE 0x2004f400 |
| |
| #define PLLDSS_MISC0_WRITE_MASK 0x47ffffff |
| #define PLLDSS_MISC1_CFG_WRITE_MASK 0xf8000000 |
| #define PLLDSS_MISC2_CTRL1_WRITE_MASK 0xffffffff |
| #define PLLDSS_MISC3_CTRL2_WRITE_MASK 0xffffffff |
| |
| #define PLLC4_MISC0_DEFAULT_VALUE 0x40000000 |
| |
| /* PLLRE */ |
| #define PLLRE_MISC0_LOCK_ENABLE (1 << 30) |
| #define PLLRE_MISC0_LOCK_OVERRIDE (1 << 29) |
| #define PLLRE_MISC0_LOCK (1 << 27) |
| #define PLLRE_MISC0_IDDQ (1 << 24) |
| |
| #define PLLRE_BASE_DEFAULT_VALUE 0x0 |
| #define PLLRE_MISC0_DEFAULT_VALUE 0x41000000 |
| |
| #define PLLRE_BASE_DEFAULT_MASK 0x1c000000 |
| #define PLLRE_MISC0_WRITE_MASK 0x67ffffff |
| |
| /* PLLX */ |
| #define PLLX_USE_DYN_RAMP 1 |
| #define PLLX_BASE_LOCK (1 << 27) |
| |
| #define PLLX_MISC0_FO_G_DISABLE (0x1 << 28) |
| #define PLLX_MISC0_LOCK_ENABLE (0x1 << 18) |
| |
| #define PLLX_MISC2_DYNRAMP_STEPB_SHIFT 24 |
| #define PLLX_MISC2_DYNRAMP_STEPB_MASK (0xFF << PLLX_MISC2_DYNRAMP_STEPB_SHIFT) |
| #define PLLX_MISC2_DYNRAMP_STEPA_SHIFT 16 |
| #define PLLX_MISC2_DYNRAMP_STEPA_MASK (0xFF << PLLX_MISC2_DYNRAMP_STEPA_SHIFT) |
| #define PLLX_MISC2_NDIV_NEW_SHIFT 8 |
| #define PLLX_MISC2_NDIV_NEW_MASK (0xFF << PLLX_MISC2_NDIV_NEW_SHIFT) |
| #define PLLX_MISC2_LOCK_OVERRIDE (0x1 << 4) |
| #define PLLX_MISC2_DYNRAMP_DONE (0x1 << 2) |
| #define PLLX_MISC2_EN_DYNRAMP (0x1 << 0) |
| |
| #define PLLX_MISC3_IDDQ (0x1 << 3) |
| |
| #define PLLX_MISC0_DEFAULT_VALUE PLLX_MISC0_LOCK_ENABLE |
| #define PLLX_MISC0_WRITE_MASK 0x10c40000 |
| #define PLLX_MISC1_DEFAULT_VALUE 0x20 |
| #define PLLX_MISC1_WRITE_MASK 0x00ffffff |
| #define PLLX_MISC2_DEFAULT_VALUE 0x0 |
| #define PLLX_MISC2_WRITE_MASK 0xffffff11 |
| #define PLLX_MISC3_DEFAULT_VALUE PLLX_MISC3_IDDQ |
| #define PLLX_MISC3_WRITE_MASK 0x01ff0f0f |
| #define PLLX_MISC4_DEFAULT_VALUE 0x0 |
| #define PLLX_MISC4_WRITE_MASK 0x8000ffff |
| #define PLLX_MISC5_DEFAULT_VALUE 0x0 |
| #define PLLX_MISC5_WRITE_MASK 0x0000ffff |
| |
| #define PLLX_HW_CTRL_CFG 0x548 |
| #define PLLX_HW_CTRL_CFG_SWCTRL (0x1 << 0) |
| |
| /* PLLMB */ |
| #define PLLMB_BASE_LOCK (1 << 27) |
| |
| #define PLLMB_MISC0_LOCK_OVERRIDE (1 << 18) |
| #define PLLMB_MISC0_IDDQ (1 << 17) |
| #define PLLMB_MISC0_LOCK_ENABLE (1 << 16) |
| |
| #define PLLMB_MISC0_DEFAULT_VALUE 0x00030000 |
| #define PLLMB_MISC0_WRITE_MASK 0x0007ffff |
| |
| /* PLLP */ |
| #define PLLP_BASE_OVERRIDE (1 << 28) |
| #define PLLP_BASE_LOCK (1 << 27) |
| |
| #define PLLP_MISC0_LOCK_ENABLE (1 << 18) |
| #define PLLP_MISC0_LOCK_OVERRIDE (1 << 17) |
| #define PLLP_MISC0_IDDQ (1 << 3) |
| |
| #define PLLP_MISC1_HSIO_EN_SHIFT 29 |
| #define PLLP_MISC1_HSIO_EN (1 << PLLP_MISC1_HSIO_EN_SHIFT) |
| #define PLLP_MISC1_XUSB_EN_SHIFT 28 |
| #define PLLP_MISC1_XUSB_EN (1 << PLLP_MISC1_XUSB_EN_SHIFT) |
| |
| #define PLLP_MISC0_DEFAULT_VALUE 0x00040008 |
| #define PLLP_MISC1_DEFAULT_VALUE 0x0 |
| |
| #define PLLP_MISC0_WRITE_MASK 0xdc6000f |
| #define PLLP_MISC1_WRITE_MASK 0x70ffffff |
| |
| /* PLLU */ |
| #define PLLU_BASE_LOCK (1 << 27) |
| #define PLLU_BASE_OVERRIDE (1 << 24) |
| #define PLLU_BASE_CLKENABLE_USB (1 << 21) |
| #define PLLU_BASE_CLKENABLE_HSIC (1 << 22) |
| #define PLLU_BASE_CLKENABLE_ICUSB (1 << 23) |
| #define PLLU_BASE_CLKENABLE_48M (1 << 25) |
| #define PLLU_BASE_CLKENABLE_ALL (PLLU_BASE_CLKENABLE_USB |\ |
| PLLU_BASE_CLKENABLE_HSIC |\ |
| PLLU_BASE_CLKENABLE_ICUSB |\ |
| PLLU_BASE_CLKENABLE_48M) |
| |
| #define PLLU_MISC0_IDDQ (1 << 31) |
| #define PLLU_MISC0_LOCK_ENABLE (1 << 29) |
| #define PLLU_MISC1_LOCK_OVERRIDE (1 << 0) |
| |
| #define PLLU_MISC0_DEFAULT_VALUE 0xa0000000 |
| #define PLLU_MISC1_DEFAULT_VALUE 0x0 |
| |
| #define PLLU_MISC0_WRITE_MASK 0xbfffffff |
| #define PLLU_MISC1_WRITE_MASK 0x00000007 |
| |
| static inline void _pll_misc_chk_default(void __iomem *base, |
| struct tegra_clk_pll_params *params, |
| u8 misc_num, u32 default_val, u32 mask) |
| { |
| u32 boot_val = readl_relaxed(base + params->ext_misc_reg[misc_num]); |
| |
| boot_val &= mask; |
| default_val &= mask; |
| if (boot_val != default_val) { |
| pr_warn("boot misc%d 0x%x: expected 0x%x\n", |
| misc_num, boot_val, default_val); |
| pr_warn(" (comparison mask = 0x%x)\n", mask); |
| params->defaults_set = false; |
| } |
| } |
| |
| /* |
| * PLLCX: PLLC, PLLC2, PLLC3, PLLA1 |
| * Hybrid PLLs with dynamic ramp. Dynamic ramp is allowed for any transition |
| * that changes NDIV only, while PLL is already locked. |
| */ |
| static void pllcx_check_defaults(struct tegra_clk_pll_params *params) |
| { |
| u32 default_val; |
| |
| default_val = PLLCX_MISC0_DEFAULT_VALUE & (~PLLCX_MISC0_RESET); |
| _pll_misc_chk_default(clk_base, params, 0, default_val, |
| PLLCX_MISC0_WRITE_MASK); |
| |
| default_val = PLLCX_MISC1_DEFAULT_VALUE & (~PLLCX_MISC1_IDDQ); |
| _pll_misc_chk_default(clk_base, params, 1, default_val, |
| PLLCX_MISC1_WRITE_MASK); |
| |
| default_val = PLLCX_MISC2_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, params, 2, default_val, |
| PLLCX_MISC2_WRITE_MASK); |
| |
| default_val = PLLCX_MISC3_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, params, 3, default_val, |
| PLLCX_MISC3_WRITE_MASK); |
| } |
| |
| void tegra210_pllcx_set_defaults(const char *name, struct tegra_clk_pll *pllcx) |
| { |
| pllcx->params->defaults_set = true; |
| |
| if (readl_relaxed(clk_base + pllcx->params->base_reg) & |
| PLL_ENABLE) { |
| /* PLL is ON: only check if defaults already set */ |
| pllcx_check_defaults(pllcx->params); |
| pr_warn("%s already enabled. Postponing set full defaults\n", |
| name); |
| return; |
| } |
| |
| /* Defaults assert PLL reset, and set IDDQ */ |
| writel_relaxed(PLLCX_MISC0_DEFAULT_VALUE, |
| clk_base + pllcx->params->ext_misc_reg[0]); |
| writel_relaxed(PLLCX_MISC1_DEFAULT_VALUE, |
| clk_base + pllcx->params->ext_misc_reg[1]); |
| writel_relaxed(PLLCX_MISC2_DEFAULT_VALUE, |
| clk_base + pllcx->params->ext_misc_reg[2]); |
| writel_relaxed(PLLCX_MISC3_DEFAULT_VALUE, |
| clk_base + pllcx->params->ext_misc_reg[3]); |
| udelay(1); |
| } |
| |
| void _pllc_set_defaults(struct tegra_clk_pll *pllcx) |
| { |
| tegra210_pllcx_set_defaults("PLL_C", pllcx); |
| } |
| |
| void _pllc2_set_defaults(struct tegra_clk_pll *pllcx) |
| { |
| tegra210_pllcx_set_defaults("PLL_C2", pllcx); |
| } |
| |
| void _pllc3_set_defaults(struct tegra_clk_pll *pllcx) |
| { |
| tegra210_pllcx_set_defaults("PLL_C3", pllcx); |
| } |
| |
| void _plla1_set_defaults(struct tegra_clk_pll *pllcx) |
| { |
| tegra210_pllcx_set_defaults("PLL_A1", pllcx); |
| } |
| |
| /* |
| * PLLA |
| * PLL with dynamic ramp and fractional SDM. Dynamic ramp is not used. |
| * Fractional SDM is allowed to provide exact audio rates. |
| */ |
| void tegra210_plla_set_defaults(struct tegra_clk_pll *plla) |
| { |
| u32 mask; |
| u32 val = readl_relaxed(clk_base + plla->params->base_reg); |
| |
| plla->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| if (val & PLLA_BASE_IDDQ) { |
| pr_warn("PLL_A boot enabled with IDDQ set\n"); |
| plla->params->defaults_set = false; |
| } |
| |
| pr_warn("PLL_A already enabled. Postponing set full defaults\n"); |
| |
| val = PLLA_MISC0_DEFAULT_VALUE; /* ignore lock enable */ |
| mask = PLLA_MISC0_LOCK_ENABLE | PLLA_MISC0_LOCK_OVERRIDE; |
| _pll_misc_chk_default(clk_base, plla->params, 0, val, |
| ~mask & PLLA_MISC0_WRITE_MASK); |
| |
| val = PLLA_MISC2_DEFAULT_VALUE; /* ignore all but control bit */ |
| _pll_misc_chk_default(clk_base, plla->params, 2, val, |
| PLLA_MISC2_EN_DYNRAMP); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + plla->params->ext_misc_reg[0]); |
| val &= ~mask; |
| val |= PLLA_MISC0_DEFAULT_VALUE & mask; |
| writel_relaxed(val, clk_base + plla->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect, disable dynamic ramp and SDM */ |
| val |= PLLA_BASE_IDDQ; |
| writel_relaxed(val, clk_base + plla->params->base_reg); |
| writel_relaxed(PLLA_MISC0_DEFAULT_VALUE, |
| clk_base + plla->params->ext_misc_reg[0]); |
| writel_relaxed(PLLA_MISC2_DEFAULT_VALUE, |
| clk_base + plla->params->ext_misc_reg[2]); |
| udelay(1); |
| } |
| |
| /* |
| * PLLD |
| * PLL with fractional SDM. |
| */ |
| void tegra210_plld_set_defaults(struct tegra_clk_pll *plld) |
| { |
| u32 val; |
| u32 mask = 0xffff; |
| |
| plld->params->defaults_set = true; |
| |
| if (readl_relaxed(clk_base + plld->params->base_reg) & |
| PLL_ENABLE) { |
| pr_warn("PLL_D already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| val = PLLD_MISC1_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, plld->params, 1, |
| val, PLLD_MISC1_WRITE_MASK); |
| |
| /* ignore lock, DSI and SDM controls, make sure IDDQ not set */ |
| val = PLLD_MISC0_DEFAULT_VALUE & (~PLLD_MISC0_IDDQ); |
| mask |= PLLD_MISC0_DSI_CLKENABLE | PLLD_MISC0_LOCK_ENABLE | |
| PLLD_MISC0_LOCK_OVERRIDE | PLLD_MISC0_EN_SDM; |
| _pll_misc_chk_default(clk_base, plld->params, 0, val, |
| ~mask & PLLD_MISC0_WRITE_MASK); |
| |
| /* Enable lock detect */ |
| mask = PLLD_MISC0_LOCK_ENABLE | PLLD_MISC0_LOCK_OVERRIDE; |
| val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]); |
| val &= ~mask; |
| val |= PLLD_MISC0_DEFAULT_VALUE & mask; |
| writel_relaxed(val, clk_base + plld->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]); |
| val &= PLLD_MISC0_DSI_CLKENABLE; |
| val |= PLLD_MISC0_DEFAULT_VALUE; |
| /* set IDDQ, enable lock detect, disable SDM */ |
| writel_relaxed(val, clk_base + plld->params->ext_misc_reg[0]); |
| writel_relaxed(PLLD_MISC1_DEFAULT_VALUE, clk_base + |
| plld->params->ext_misc_reg[1]); |
| udelay(1); |
| } |
| |
| /* |
| * PLLD2, PLLDP |
| * PLL with fractional SDM and Spread Spectrum (SDM is a must if SSC is used). |
| */ |
| static void plldss_defaults(const char *pll_name, struct tegra_clk_pll *plldss, |
| u32 misc0_val, u32 misc1_val, u32 misc2_val, u32 misc3_val) |
| { |
| u32 default_val; |
| u32 val = readl_relaxed(clk_base + plldss->params->base_reg); |
| |
| plldss->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| pr_warn("%s already enabled. Postponing set full defaults\n", |
| pll_name); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| if (val & PLLDSS_BASE_IDDQ) { |
| pr_warn("plldss boot enabled with IDDQ set\n"); |
| plldss->params->defaults_set = false; |
| } |
| |
| /* ignore lock enable */ |
| default_val = misc0_val; |
| _pll_misc_chk_default(clk_base, plldss->params, 0, default_val, |
| PLLDSS_MISC0_WRITE_MASK & |
| (~PLLDSS_MISC0_LOCK_ENABLE)); |
| |
| /* |
| * If SSC is used, check all settings, otherwise just confirm |
| * that SSC is not used on boot as well. Do nothing when using |
| * this function for PLLC4 that has only MISC0. |
| */ |
| if (plldss->params->ssc_ctrl_en_mask) { |
| default_val = misc1_val; |
| _pll_misc_chk_default(clk_base, plldss->params, 1, |
| default_val, PLLDSS_MISC1_CFG_WRITE_MASK); |
| default_val = misc2_val; |
| _pll_misc_chk_default(clk_base, plldss->params, 2, |
| default_val, PLLDSS_MISC2_CTRL1_WRITE_MASK); |
| default_val = misc3_val; |
| _pll_misc_chk_default(clk_base, plldss->params, 3, |
| default_val, PLLDSS_MISC3_CTRL2_WRITE_MASK); |
| } else if (plldss->params->ext_misc_reg[1]) { |
| default_val = misc1_val; |
| _pll_misc_chk_default(clk_base, plldss->params, 1, |
| default_val, PLLDSS_MISC1_CFG_WRITE_MASK & |
| (~PLLDSS_MISC1_CFG_EN_SDM)); |
| } |
| |
| /* Enable lock detect */ |
| if (val & PLLDSS_BASE_LOCK_OVERRIDE) { |
| val &= ~PLLDSS_BASE_LOCK_OVERRIDE; |
| writel_relaxed(val, clk_base + |
| plldss->params->base_reg); |
| } |
| |
| val = readl_relaxed(clk_base + plldss->params->ext_misc_reg[0]); |
| val &= ~PLLDSS_MISC0_LOCK_ENABLE; |
| val |= misc0_val & PLLDSS_MISC0_LOCK_ENABLE; |
| writel_relaxed(val, clk_base + plldss->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect, configure SDM/SSC */ |
| val |= PLLDSS_BASE_IDDQ; |
| val &= ~PLLDSS_BASE_LOCK_OVERRIDE; |
| writel_relaxed(val, clk_base + plldss->params->base_reg); |
| |
| /* When using this function for PLLC4 exit here */ |
| if (!plldss->params->ext_misc_reg[1]) { |
| writel_relaxed(misc0_val, clk_base + |
| plldss->params->ext_misc_reg[0]); |
| udelay(1); |
| return; |
| } |
| |
| writel_relaxed(misc0_val, clk_base + |
| plldss->params->ext_misc_reg[0]); |
| /* if SSC used set by 1st enable */ |
| writel_relaxed(misc1_val & (~PLLDSS_MISC1_CFG_EN_SSC), |
| clk_base + plldss->params->ext_misc_reg[1]); |
| writel_relaxed(misc2_val, clk_base + plldss->params->ext_misc_reg[2]); |
| writel_relaxed(misc3_val, clk_base + plldss->params->ext_misc_reg[3]); |
| udelay(1); |
| } |
| |
| void tegra210_plld2_set_defaults(struct tegra_clk_pll *plld2) |
| { |
| plldss_defaults("PLL_D2", plld2, PLLD2_MISC0_DEFAULT_VALUE, |
| PLLD2_MISC1_CFG_DEFAULT_VALUE, |
| PLLD2_MISC2_CTRL1_DEFAULT_VALUE, |
| PLLD2_MISC3_CTRL2_DEFAULT_VALUE); |
| } |
| |
| void tegra210_plldp_set_defaults(struct tegra_clk_pll *plldp) |
| { |
| plldss_defaults("PLL_DP", plldp, PLLDP_MISC0_DEFAULT_VALUE, |
| PLLDP_MISC1_CFG_DEFAULT_VALUE, |
| PLLDP_MISC2_CTRL1_DEFAULT_VALUE, |
| PLLDP_MISC3_CTRL2_DEFAULT_VALUE); |
| } |
| |
| /* |
| * PLLC4 |
| * Base and misc0 layout is the same as PLLD2/PLLDP, but no SDM/SSC support. |
| * VCO is exposed to the clock tree via fixed 1/3 and 1/5 dividers. |
| */ |
| void tegra210_pllc4_set_defaults(struct tegra_clk_pll *pllc4) |
| { |
| plldss_defaults("PLL_C4", pllc4, PLLC4_MISC0_DEFAULT_VALUE, 0, 0, 0); |
| } |
| |
| /* |
| * PLLRE |
| * VCO is exposed to the clock tree directly along with post-divider output |
| */ |
| void tegra210_pllre_set_defaults(struct tegra_clk_pll *pllre) |
| { |
| u32 mask; |
| u32 val = readl_relaxed(clk_base + pllre->params->base_reg); |
| |
| pllre->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| pr_warn("PLL_RE already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| val &= PLLRE_BASE_DEFAULT_MASK; |
| if (val != PLLRE_BASE_DEFAULT_VALUE) { |
| pr_warn("pllre boot base 0x%x : expected 0x%x\n", |
| val, PLLRE_BASE_DEFAULT_VALUE); |
| pr_warn("(comparison mask = 0x%x)\n", |
| PLLRE_BASE_DEFAULT_MASK); |
| pllre->params->defaults_set = false; |
| } |
| |
| /* Ignore lock enable */ |
| val = PLLRE_MISC0_DEFAULT_VALUE & (~PLLRE_MISC0_IDDQ); |
| mask = PLLRE_MISC0_LOCK_ENABLE | PLLRE_MISC0_LOCK_OVERRIDE; |
| _pll_misc_chk_default(clk_base, pllre->params, 0, val, |
| ~mask & PLLRE_MISC0_WRITE_MASK); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + pllre->params->ext_misc_reg[0]); |
| val &= ~mask; |
| val |= PLLRE_MISC0_DEFAULT_VALUE & mask; |
| writel_relaxed(val, clk_base + pllre->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect */ |
| val &= ~PLLRE_BASE_DEFAULT_MASK; |
| val |= PLLRE_BASE_DEFAULT_VALUE & PLLRE_BASE_DEFAULT_MASK; |
| writel_relaxed(val, clk_base + pllre->params->base_reg); |
| writel_relaxed(PLLRE_MISC0_DEFAULT_VALUE, |
| clk_base + pllre->params->ext_misc_reg[0]); |
| udelay(1); |
| } |
| |
| static void pllx_get_dyn_steps(struct clk_hw *hw, u32 *step_a, u32 *step_b) |
| { |
| unsigned long input_rate; |
| |
| if (!IS_ERR_OR_NULL(hw->clk)) { |
| input_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); |
| /* cf rate */ |
| input_rate /= tegra_pll_get_fixed_mdiv(hw, input_rate); |
| } else { |
| input_rate = 38400000; |
| } |
| |
| switch (input_rate) { |
| case 12000000: |
| case 12800000: |
| case 13000000: |
| *step_a = 0x2B; |
| *step_b = 0x0B; |
| return; |
| case 19200000: |
| *step_a = 0x12; |
| *step_b = 0x08; |
| return; |
| case 38400000: |
| *step_a = 0x04; |
| *step_b = 0x05; |
| return; |
| default: |
| pr_err("%s: Unexpected reference rate %lu\n", |
| __func__, input_rate); |
| BUG(); |
| } |
| } |
| |
| static void pllx_check_defaults(struct tegra_clk_pll *pll) |
| { |
| u32 default_val; |
| |
| default_val = PLLX_MISC0_DEFAULT_VALUE; |
| /* ignore lock enable */ |
| _pll_misc_chk_default(clk_base, pll->params, 0, default_val, |
| PLLX_MISC0_WRITE_MASK & (~PLLX_MISC0_LOCK_ENABLE)); |
| |
| default_val = PLLX_MISC1_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, pll->params, 1, default_val, |
| PLLX_MISC1_WRITE_MASK); |
| |
| /* ignore all but control bit */ |
| default_val = PLLX_MISC2_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, pll->params, 2, |
| default_val, PLLX_MISC2_EN_DYNRAMP); |
| |
| default_val = PLLX_MISC3_DEFAULT_VALUE & (~PLLX_MISC3_IDDQ); |
| _pll_misc_chk_default(clk_base, pll->params, 3, default_val, |
| PLLX_MISC3_WRITE_MASK); |
| |
| default_val = PLLX_MISC4_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, pll->params, 4, default_val, |
| PLLX_MISC4_WRITE_MASK); |
| |
| default_val = PLLX_MISC5_DEFAULT_VALUE; |
| _pll_misc_chk_default(clk_base, pll->params, 5, default_val, |
| PLLX_MISC5_WRITE_MASK); |
| } |
| |
| void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx) |
| { |
| u32 val; |
| u32 step_a, step_b; |
| |
| pllx->params->defaults_set = true; |
| |
| /* Get ready dyn ramp state machine settings */ |
| pllx_get_dyn_steps(&pllx->hw, &step_a, &step_b); |
| val = PLLX_MISC2_DEFAULT_VALUE & (~PLLX_MISC2_DYNRAMP_STEPA_MASK) & |
| (~PLLX_MISC2_DYNRAMP_STEPB_MASK); |
| val |= step_a << PLLX_MISC2_DYNRAMP_STEPA_SHIFT; |
| val |= step_b << PLLX_MISC2_DYNRAMP_STEPB_SHIFT; |
| |
| if (readl_relaxed(clk_base + pllx->params->base_reg) & PLL_ENABLE) { |
| pr_warn("PLL_X already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| pllx_check_defaults(pllx); |
| |
| /* Configure dyn ramp, disable lock override */ |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[0]); |
| val &= ~PLLX_MISC0_LOCK_ENABLE; |
| val |= PLLX_MISC0_DEFAULT_VALUE & PLLX_MISC0_LOCK_ENABLE; |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* Enable lock detect and CPU output */ |
| writel_relaxed(PLLX_MISC0_DEFAULT_VALUE, clk_base + |
| pllx->params->ext_misc_reg[0]); |
| |
| /* Setup */ |
| writel_relaxed(PLLX_MISC1_DEFAULT_VALUE, clk_base + |
| pllx->params->ext_misc_reg[1]); |
| |
| /* Configure dyn ramp state machine, disable lock override */ |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]); |
| |
| /* Set IDDQ */ |
| writel_relaxed(PLLX_MISC3_DEFAULT_VALUE, clk_base + |
| pllx->params->ext_misc_reg[3]); |
| |
| /* Disable SDM */ |
| writel_relaxed(PLLX_MISC4_DEFAULT_VALUE, clk_base + |
| pllx->params->ext_misc_reg[4]); |
| writel_relaxed(PLLX_MISC5_DEFAULT_VALUE, clk_base + |
| pllx->params->ext_misc_reg[5]); |
| udelay(1); |
| } |
| |
| /* PLLMB */ |
| void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb) |
| { |
| u32 mask, val = readl_relaxed(clk_base + pllmb->params->base_reg); |
| |
| pllmb->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| pr_warn("PLL_MB already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| val = PLLMB_MISC0_DEFAULT_VALUE & (~PLLMB_MISC0_IDDQ); |
| mask = PLLMB_MISC0_LOCK_ENABLE | PLLMB_MISC0_LOCK_OVERRIDE; |
| _pll_misc_chk_default(clk_base, pllmb->params, 0, val, |
| ~mask & PLLMB_MISC0_WRITE_MASK); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + pllmb->params->ext_misc_reg[0]); |
| val &= ~mask; |
| val |= PLLMB_MISC0_DEFAULT_VALUE & mask; |
| writel_relaxed(val, clk_base + pllmb->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect */ |
| writel_relaxed(PLLMB_MISC0_DEFAULT_VALUE, |
| clk_base + pllmb->params->ext_misc_reg[0]); |
| udelay(1); |
| } |
| |
| /* |
| * PLLP |
| * VCO is exposed to the clock tree directly along with post-divider output. |
| * Both VCO and post-divider output rates are fixed at 408MHz and 204MHz, |
| * respectively. |
| */ |
| static void pllp_check_defaults(struct tegra_clk_pll *pll, bool enabled) |
| { |
| u32 val, mask; |
| |
| /* Ignore lock enable (will be set), make sure not in IDDQ if enabled */ |
| val = PLLP_MISC0_DEFAULT_VALUE & (~PLLP_MISC0_IDDQ); |
| mask = PLLP_MISC0_LOCK_ENABLE | PLLP_MISC0_LOCK_OVERRIDE; |
| if (!enabled) |
| mask |= PLLP_MISC0_IDDQ; |
| _pll_misc_chk_default(clk_base, pll->params, 0, val, |
| ~mask & PLLP_MISC0_WRITE_MASK); |
| |
| /* Ignore branch controls */ |
| val = PLLP_MISC1_DEFAULT_VALUE; |
| mask = PLLP_MISC1_HSIO_EN | PLLP_MISC1_XUSB_EN; |
| _pll_misc_chk_default(clk_base, pll->params, 1, val, |
| ~mask & PLLP_MISC1_WRITE_MASK); |
| } |
| |
| void tegra210_pllp_set_defaults(struct tegra_clk_pll *pllp) |
| { |
| u32 mask; |
| u32 val = readl_relaxed(clk_base + pllp->params->base_reg); |
| |
| pllp->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| pr_warn("PLL_P already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| pllp_check_defaults(pllp, true); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[0]); |
| mask = PLLP_MISC0_LOCK_ENABLE | PLLP_MISC0_LOCK_OVERRIDE; |
| val &= ~mask; |
| val |= PLLP_MISC0_DEFAULT_VALUE & mask; |
| writel_relaxed(val, clk_base + pllp->params->ext_misc_reg[0]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect */ |
| writel_relaxed(PLLP_MISC0_DEFAULT_VALUE, |
| clk_base + pllp->params->ext_misc_reg[0]); |
| |
| /* Preserve branch control */ |
| val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[1]); |
| mask = PLLP_MISC1_HSIO_EN | PLLP_MISC1_XUSB_EN; |
| val &= mask; |
| val |= ~mask & PLLP_MISC1_DEFAULT_VALUE; |
| writel_relaxed(val, clk_base + pllp->params->ext_misc_reg[1]); |
| udelay(1); |
| } |
| |
| /* |
| * PLLU |
| * VCO is exposed to the clock tree directly along with post-divider output. |
| * Both VCO and post-divider output rates are fixed at 480MHz and 240MHz, |
| * respectively. |
| */ |
| static void pllu_check_defaults(struct tegra_clk_pll *pll, bool hw_control) |
| { |
| u32 val, mask; |
| |
| /* Ignore lock enable (will be set) and IDDQ if under h/w control */ |
| val = PLLU_MISC0_DEFAULT_VALUE & (~PLLU_MISC0_IDDQ); |
| mask = PLLU_MISC0_LOCK_ENABLE | (hw_control ? PLLU_MISC0_IDDQ : 0); |
| _pll_misc_chk_default(clk_base, pll->params, 0, val, |
| ~mask & PLLU_MISC0_WRITE_MASK); |
| |
| val = PLLU_MISC1_DEFAULT_VALUE; |
| mask = PLLU_MISC1_LOCK_OVERRIDE; |
| _pll_misc_chk_default(clk_base, pll->params, 1, val, |
| ~mask & PLLU_MISC1_WRITE_MASK); |
| } |
| |
| void tegra210_pllu_set_defaults(struct tegra_clk_pll *pllu) |
| { |
| u32 val = readl_relaxed(clk_base + pllu->params->base_reg); |
| |
| pllu->params->defaults_set = true; |
| |
| if (val & PLL_ENABLE) { |
| pr_warn("PLL_U already enabled. Postponing set full defaults\n"); |
| |
| /* |
| * PLL is ON: check if defaults already set, then set those |
| * that can be updated in flight. |
| */ |
| pllu_check_defaults(pllu, false); |
| |
| /* Enable lock detect */ |
| val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[0]); |
| val &= ~PLLU_MISC0_LOCK_ENABLE; |
| val |= PLLU_MISC0_DEFAULT_VALUE & PLLU_MISC0_LOCK_ENABLE; |
| writel_relaxed(val, clk_base + pllu->params->ext_misc_reg[0]); |
| |
| val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[1]); |
| val &= ~PLLU_MISC1_LOCK_OVERRIDE; |
| val |= PLLU_MISC1_DEFAULT_VALUE & PLLU_MISC1_LOCK_OVERRIDE; |
| writel_relaxed(val, clk_base + pllu->params->ext_misc_reg[1]); |
| udelay(1); |
| |
| return; |
| } |
| |
| /* set IDDQ, enable lock detect */ |
| writel_relaxed(PLLU_MISC0_DEFAULT_VALUE, |
| clk_base + pllu->params->ext_misc_reg[0]); |
| writel_relaxed(PLLU_MISC1_DEFAULT_VALUE, |
| clk_base + pllu->params->ext_misc_reg[1]); |
| udelay(1); |
| } |
| |
| #define mask(w) ((1 << (w)) - 1) |
| #define divm_mask(p) mask(p->params->div_nmp->divm_width) |
| #define divn_mask(p) mask(p->params->div_nmp->divn_width) |
| #define divp_mask(p) (p->params->flags & TEGRA_PLLU ? PLLU_POST_DIVP_MASK :\ |
| mask(p->params->div_nmp->divp_width)) |
| |
| #define divm_shift(p) ((p)->params->div_nmp->divm_shift) |
| #define divn_shift(p) ((p)->params->div_nmp->divn_shift) |
| #define divp_shift(p) ((p)->params->div_nmp->divp_shift) |
| |
| #define divm_mask_shifted(p) (divm_mask(p) << divm_shift(p)) |
| #define divn_mask_shifted(p) (divn_mask(p) << divn_shift(p)) |
| #define divp_mask_shifted(p) (divp_mask(p) << divp_shift(p)) |
| |
| #define PLL_LOCKDET_DELAY 2 /* Lock detection safety delays */ |
| static int tegra210_wait_for_mask(struct tegra_clk_pll *pll, |
| u32 reg, u32 mask) |
| { |
| int i; |
| u32 val = 0; |
| |
| for (i = 0; i < pll->params->lock_delay / PLL_LOCKDET_DELAY + 1; i++) { |
| udelay(PLL_LOCKDET_DELAY); |
| val = readl_relaxed(clk_base + reg); |
| if ((val & mask) == mask) { |
| udelay(PLL_LOCKDET_DELAY); |
| return 0; |
| } |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int tegra210_pllx_dyn_ramp(struct tegra_clk_pll *pllx, |
| struct tegra_clk_pll_freq_table *cfg) |
| { |
| u32 val, base, ndiv_new_mask; |
| |
| ndiv_new_mask = (divn_mask(pllx) >> pllx->params->div_nmp->divn_shift) |
| << PLLX_MISC2_NDIV_NEW_SHIFT; |
| |
| val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[2]); |
| val &= (~ndiv_new_mask); |
| val |= cfg->n << PLLX_MISC2_NDIV_NEW_SHIFT; |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]); |
| udelay(1); |
| |
| val = readl_relaxed(clk_base + pllx->params->ext_misc_reg[2]); |
| val |= PLLX_MISC2_EN_DYNRAMP; |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]); |
| udelay(1); |
| |
| tegra210_wait_for_mask(pllx, pllx->params->ext_misc_reg[2], |
| PLLX_MISC2_DYNRAMP_DONE); |
| |
| base = readl_relaxed(clk_base + pllx->params->base_reg) & |
| (~divn_mask_shifted(pllx)); |
| base |= cfg->n << pllx->params->div_nmp->divn_shift; |
| writel_relaxed(base, clk_base + pllx->params->base_reg); |
| udelay(1); |
| |
| val &= ~PLLX_MISC2_EN_DYNRAMP; |
| writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]); |
| udelay(1); |
| |
| pr_debug("%s: dynamic ramp to m = %u n = %u p = %u, Fout = %lu kHz\n", |
| __clk_get_name(pllx->hw.clk), cfg->m, cfg->n, cfg->p, |
| cfg->input_rate / cfg->m * cfg->n / |
| pllx->params->pdiv_tohw[cfg->p].pdiv / 1000); |
| |
| return 0; |
| } |
| |
| /* |
| * Common configuration for PLLs with fixed input divider policy: |
| * - always set fixed M-value based on the reference rate |
| * - always set P-value value 1:1 for output rates above VCO minimum, and |
| * choose minimum necessary P-value for output rates below VCO maximum |
| * - calculate N-value based on selected M and P |
| * - calculate SDM_DIN fractional part |
| */ |
| static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw, |
| struct tegra_clk_pll_freq_table *cfg, |
| unsigned long rate, unsigned long input_rate) |
| { |
| struct tegra_clk_pll *pll = to_clk_pll(hw); |
| struct tegra_clk_pll_params *params = pll->params; |
| int p; |
| unsigned long cf, p_rate; |
| u32 pdiv; |
| |
| if (!rate) |
| return -EINVAL; |
| |
| if (!(params->flags & TEGRA_PLL_VCO_OUT)) { |
| p = DIV_ROUND_UP(params->vco_min, rate); |
| p = params->round_p_to_pdiv(p, &pdiv); |
| } else { |
| p = rate >= params->vco_min ? 1 : -EINVAL; |
| } |
| |
| if (IS_ERR_VALUE(p)) |
| return -EINVAL; |
| |
| cfg->m = tegra_pll_get_fixed_mdiv(hw, input_rate); |
| cfg->p = p; |
| |
| /* Store P as HW value, as that is what is expected */ |
| cfg->p = tegra_pll_p_div_to_hw(pll, cfg->p); |
| |
| p_rate = rate * p; |
| if (p_rate > params->vco_max) |
| p_rate = params->vco_max; |
| cf = input_rate / cfg->m; |
| cfg->n = p_rate / cf; |
| |
| cfg->sdm_data = 0; |
| if (params->sdm_ctrl_reg) { |
| unsigned long rem = p_rate - cf * cfg->n; |
| /* If ssc is enabled SDM enabled as well, even for integer n */ |
| if (rem || params->ssc_ctrl_reg) { |
| u64 s = rem * PLL_SDM_COEFF; |
| |
| do_div(s, cf); |
| s -= PLL_SDM_COEFF / 2; |
| cfg->sdm_data = sdin_din_to_data(s); |
| } |
| } |
| |
| cfg->input_rate = input_rate; |
| cfg->output_rate = rate; |
| |
| return 0; |
| } |
| |
| /* |
| * clk_pll_set_gain - set gain to m, n to calculate correct VCO rate |
| * |
| * @cfg: struct tegra_clk_pll_freq_table * cfg |
| * |
| * For Normal mode: |
| * Fvco = Fref * NDIV / MDIV |
| * |
| * For fractional mode: |
| * Fvco = Fref * (NDIV + 0.5 + SDM_DIN / PLL_SDM_COEFF) / MDIV |
| */ |
| static void tegra210_clk_pll_set_gain(struct tegra_clk_pll_freq_table *cfg) |
| { |
| cfg->n = cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 + |
| sdin_data_to_din(cfg->sdm_data); |
| cfg->m *= PLL_SDM_COEFF; |
| } |
| |
| unsigned long tegra210_clk_adjust_vco_min(struct tegra_clk_pll_params *params, |
| unsigned long parent_rate) |
| { |
| unsigned long vco_min = params->vco_min; |
| |
| params->vco_min += DIV_ROUND_UP(parent_rate, PLL_SDM_COEFF); |
| vco_min = min(vco_min, params->vco_min); |
| |
| return vco_min; |
| } |
| |
| static struct div_nmp pllx_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| }; |
| /* |
| * PLL post divider maps - two types: quasi-linear and exponential |
| * post divider. |
| */ |
| #define PLL_QLIN_PDIV_MAX 16 |
| static const struct pdiv_map pll_qlin_pdiv_to_hw[] = { |
| { .pdiv = 1, .hw_val = 0 }, |
| { .pdiv = 2, .hw_val = 1 }, |
| { .pdiv = 3, .hw_val = 2 }, |
| { .pdiv = 4, .hw_val = 3 }, |
| { .pdiv = 5, .hw_val = 4 }, |
| { .pdiv = 6, .hw_val = 5 }, |
| { .pdiv = 8, .hw_val = 6 }, |
| { .pdiv = 9, .hw_val = 7 }, |
| { .pdiv = 10, .hw_val = 8 }, |
| { .pdiv = 12, .hw_val = 9 }, |
| { .pdiv = 15, .hw_val = 10 }, |
| { .pdiv = 16, .hw_val = 11 }, |
| { .pdiv = 18, .hw_val = 12 }, |
| { .pdiv = 20, .hw_val = 13 }, |
| { .pdiv = 24, .hw_val = 14 }, |
| { .pdiv = 30, .hw_val = 15 }, |
| { .pdiv = 32, .hw_val = 16 }, |
| }; |
| |
| static u32 pll_qlin_p_to_pdiv(u32 p, u32 *pdiv) |
| { |
| int i; |
| |
| if (p) { |
| for (i = 0; i <= PLL_QLIN_PDIV_MAX; i++) { |
| if (p <= pll_qlin_pdiv_to_hw[i].pdiv) { |
| if (pdiv) |
| *pdiv = i; |
| return pll_qlin_pdiv_to_hw[i].pdiv; |
| } |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| #define PLL_EXPO_PDIV_MAX 7 |
| static const struct pdiv_map pll_expo_pdiv_to_hw[] = { |
| { .pdiv = 1, .hw_val = 0 }, |
| { .pdiv = 2, .hw_val = 1 }, |
| { .pdiv = 4, .hw_val = 2 }, |
| { .pdiv = 8, .hw_val = 3 }, |
| { .pdiv = 16, .hw_val = 4 }, |
| { .pdiv = 32, .hw_val = 5 }, |
| { .pdiv = 64, .hw_val = 6 }, |
| { .pdiv = 128, .hw_val = 7 }, |
| }; |
| |
| static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv) |
| { |
| if (p) { |
| u32 i = fls(p); |
| |
| if (i == ffs(p)) |
| i--; |
| |
| if (i <= PLL_EXPO_PDIV_MAX) { |
| if (pdiv) |
| *pdiv = i; |
| return 1 << i; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static struct tegra_clk_pll_freq_table pll_x_freq_table[] = { |
| /* 1 GHz */ |
| { 12000000, 1000000000, 166, 1, 1, 0 }, /* actual: 996.0 MHz */ |
| { 13000000, 1000000000, 153, 1, 1, 0 }, /* actual: 994.0 MHz */ |
| { 38400000, 1000000000, 156, 3, 1, 0 }, /* actual: 998.4 MHz */ |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_x_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 38400000, |
| .vco_min = 1350000000, |
| .vco_max = 3000000000UL, |
| .base_reg = PLLX_BASE, |
| .misc_reg = PLLX_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLL_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .ext_misc_reg[0] = PLLX_MISC0, |
| .ext_misc_reg[1] = PLLX_MISC1, |
| .ext_misc_reg[2] = PLLX_MISC2, |
| .ext_misc_reg[3] = PLLX_MISC3, |
| .ext_misc_reg[4] = PLLX_MISC4, |
| .ext_misc_reg[5] = PLLX_MISC5, |
| .iddq_reg = PLLX_MISC3, |
| .iddq_bit_idx = PLLXP_IDDQ_BIT, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .mdiv_default = 2, |
| .dyn_ramp_reg = PLLX_MISC2, |
| .stepa_shift = 16, |
| .stepb_shift = 24, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllx_nmp, |
| .freq_table = pll_x_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .dyn_ramp = tegra210_pllx_dyn_ramp, |
| .set_defaults = tegra210_pllx_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct div_nmp pllc_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 10, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_cx_freq_table[] = { |
| { 12000000, 510000000, 85, 1, 1, 0 }, |
| { 13000000, 510000000, 78, 1, 1, 0 }, /* actual: 507.0 MHz */ |
| { 38400000, 510000000, 79, 3, 1, 0 }, /* actual: 505.6 MHz */ |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_c_params = { |
| .input_min = 12000000, |
| .input_max = 700000000, |
| .cf_min = 12000000, |
| .cf_max = 50000000, |
| .vco_min = 600000000, |
| .vco_max = 1200000000, |
| .base_reg = PLLC_BASE, |
| .misc_reg = PLLC_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_delay = 300, |
| .iddq_reg = PLLC_MISC1, |
| .iddq_bit_idx = PLLCX_IDDQ_BIT, |
| .reset_reg = PLLC_MISC0, |
| .reset_bit_idx = PLLCX_RESET_BIT, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLC_MISC0, |
| .ext_misc_reg[1] = PLLC_MISC1, |
| .ext_misc_reg[2] = PLLC_MISC2, |
| .ext_misc_reg[3] = PLLC_MISC3, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .mdiv_default = 3, |
| .div_nmp = &pllc_nmp, |
| .freq_table = pll_cx_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = _pllc_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct div_nmp pllcx_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 10, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_params pll_c2_params = { |
| .input_min = 12000000, |
| .input_max = 700000000, |
| .cf_min = 12000000, |
| .cf_max = 50000000, |
| .vco_min = 600000000, |
| .vco_max = 1200000000, |
| .base_reg = PLLC2_BASE, |
| .misc_reg = PLLC2_MISC0, |
| .iddq_reg = PLLC2_MISC1, |
| .iddq_bit_idx = PLLCX_IDDQ_BIT, |
| .reset_reg = PLLC2_MISC0, |
| .reset_bit_idx = PLLCX_RESET_BIT, |
| .lock_mask = PLLCX_BASE_LOCK, |
| .lock_delay = 300, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .mdiv_default = 3, |
| .div_nmp = &pllcx_nmp, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLC2_MISC0, |
| .ext_misc_reg[1] = PLLC2_MISC1, |
| .ext_misc_reg[2] = PLLC2_MISC2, |
| .ext_misc_reg[3] = PLLC2_MISC3, |
| .freq_table = pll_cx_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = _pllc2_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct tegra_clk_pll_params pll_c3_params = { |
| .input_min = 12000000, |
| .input_max = 700000000, |
| .cf_min = 12000000, |
| .cf_max = 50000000, |
| .vco_min = 600000000, |
| .vco_max = 1200000000, |
| .base_reg = PLLC3_BASE, |
| .misc_reg = PLLC3_MISC0, |
| .lock_mask = PLLCX_BASE_LOCK, |
| .lock_delay = 300, |
| .iddq_reg = PLLC3_MISC1, |
| .iddq_bit_idx = PLLCX_IDDQ_BIT, |
| .reset_reg = PLLC3_MISC0, |
| .reset_bit_idx = PLLCX_RESET_BIT, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .mdiv_default = 3, |
| .div_nmp = &pllcx_nmp, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLC3_MISC0, |
| .ext_misc_reg[1] = PLLC3_MISC1, |
| .ext_misc_reg[2] = PLLC3_MISC2, |
| .ext_misc_reg[3] = PLLC3_MISC3, |
| .freq_table = pll_cx_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = _pllc3_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct div_nmp pllss_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 19, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_c4_vco_freq_table[] = { |
| { 12000000, 600000000, 50, 1, 0, 0 }, |
| { 13000000, 600000000, 46, 1, 0, 0 }, /* actual: 598.0 MHz */ |
| { 38400000, 600000000, 62, 4, 0, 0 }, /* actual: 595.2 MHz */ |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static const struct clk_div_table pll_vco_post_div_table[] = { |
| { .val = 0, .div = 1 }, |
| { .val = 1, .div = 2 }, |
| { .val = 2, .div = 3 }, |
| { .val = 3, .div = 4 }, |
| { .val = 4, .div = 5 }, |
| { .val = 5, .div = 6 }, |
| { .val = 6, .div = 8 }, |
| { .val = 7, .div = 10 }, |
| { .val = 8, .div = 12 }, |
| { .val = 9, .div = 16 }, |
| { .val = 10, .div = 12 }, |
| { .val = 11, .div = 16 }, |
| { .val = 12, .div = 20 }, |
| { .val = 13, .div = 24 }, |
| { .val = 14, .div = 32 }, |
| { .val = 0, .div = 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_c4_vco_params = { |
| .input_min = 9600000, |
| .input_max = 800000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 500000000, |
| .vco_max = 1080000000, |
| .base_reg = PLLC4_BASE, |
| .misc_reg = PLLC4_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLC4_MISC0, |
| .iddq_reg = PLLC4_BASE, |
| .iddq_bit_idx = PLLSS_IDDQ_BIT, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .mdiv_default = 3, |
| .div_nmp = &pllss_nmp, |
| .freq_table = pll_c4_vco_freq_table, |
| .set_defaults = tegra210_pllc4_set_defaults, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE | |
| TEGRA_PLL_VCO_OUT, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_m_freq_table[] = { |
| { 12000000, 800000000, 66, 1, 0, 0 }, /* actual: 792.0 MHz */ |
| { 13000000, 800000000, 61, 1, 0, 0 }, /* actual: 793.0 MHz */ |
| { 38400000, 297600000, 93, 4, 2, 0 }, |
| { 38400000, 400000000, 125, 4, 2, 0 }, |
| { 38400000, 532800000, 111, 4, 1, 0 }, |
| { 38400000, 665600000, 104, 3, 1, 0 }, |
| { 38400000, 800000000, 125, 3, 1, 0 }, |
| { 38400000, 931200000, 97, 4, 0, 0 }, |
| { 38400000, 1065600000, 111, 4, 0, 0 }, |
| { 38400000, 1200000000, 125, 4, 0, 0 }, |
| { 38400000, 1331200000, 104, 3, 0, 0 }, |
| { 38400000, 1459200000, 76, 2, 0, 0 }, |
| { 38400000, 1600000000, 125, 3, 0, 0 }, |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct div_nmp pllm_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .override_divm_shift = 0, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .override_divn_shift = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| .override_divp_shift = 27, |
| }; |
| |
| static struct tegra_clk_pll_params pll_m_params = { |
| .input_min = 9600000, |
| .input_max = 500000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 800000000, |
| .vco_max = 1866000000, |
| .base_reg = PLLM_BASE, |
| .misc_reg = PLLM_MISC1, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLM_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .iddq_reg = PLLM_MISC0, |
| .iddq_bit_idx = PLLM_IDDQ_BIT, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLM_MISC0, |
| .ext_misc_reg[0] = PLLM_MISC1, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllm_nmp, |
| .pmc_divnm_reg = PMC_PLLM_WB0_OVERRIDE, |
| .pmc_divp_reg = PMC_PLLM_WB0_OVERRIDE_2, |
| .freq_table = pll_m_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct tegra_clk_pll_params pll_mb_params = { |
| .input_min = 9600000, |
| .input_max = 500000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 800000000, |
| .vco_max = 1866000000, |
| .base_reg = PLLMB_BASE, |
| .misc_reg = PLLMB_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLMB_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .iddq_reg = PLLMB_MISC0, |
| .iddq_bit_idx = PLLMB_IDDQ_BIT, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLMB_MISC0, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllm_nmp, |
| .freq_table = pll_m_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = tegra210_pllmb_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| |
| static struct tegra_clk_pll_freq_table pll_e_freq_table[] = { |
| /* PLLE special case: use cpcon field to store cml divider value */ |
| { 672000000, 100000000, 125, 42, 0, 13 }, |
| { 624000000, 100000000, 125, 39, 0, 13 }, |
| { 336000000, 100000000, 125, 21, 0, 13 }, |
| { 312000000, 100000000, 200, 26, 0, 14 }, |
| { 38400000, 100000000, 125, 2, 0, 14 }, |
| { 12000000, 100000000, 200, 1, 0, 14 }, |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct div_nmp plle_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 24, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_params pll_e_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 38400000, |
| .vco_min = 1600000000, |
| .vco_max = 2500000000U, |
| .base_reg = PLLE_BASE, |
| .misc_reg = PLLE_MISC0, |
| .aux_reg = PLLE_AUX, |
| .lock_mask = PLLE_MISC_LOCK, |
| .lock_enable_bit_idx = PLLE_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .div_nmp = &plle_nmp, |
| .freq_table = pll_e_freq_table, |
| .flags = TEGRA_PLL_FIXED | TEGRA_PLL_LOCK_MISC | TEGRA_PLL_USE_LOCK | |
| TEGRA_PLL_HAS_LOCK_ENABLE, |
| .fixed_rate = 100000000, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_re_vco_freq_table[] = { |
| { 12000000, 672000000, 56, 1, 0, 0 }, |
| { 13000000, 672000000, 51, 1, 0, 0 }, /* actual: 663.0 MHz */ |
| { 38400000, 672000000, 70, 4, 0, 0 }, |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct div_nmp pllre_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 16, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_params pll_re_vco_params = { |
| .input_min = 9600000, |
| .input_max = 800000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 350000000, |
| .vco_max = 700000000, |
| .base_reg = PLLRE_BASE, |
| .misc_reg = PLLRE_MISC0, |
| .lock_mask = PLLRE_MISC_LOCK, |
| .lock_enable_bit_idx = PLLRE_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .ext_misc_reg[0] = PLLRE_MISC0, |
| .iddq_reg = PLLRE_MISC0, |
| .iddq_bit_idx = PLLRE_IDDQ_BIT, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllre_nmp, |
| .freq_table = pll_re_vco_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_LOCK_MISC | |
| TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_VCO_OUT, |
| .set_defaults = tegra210_pllre_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct div_nmp pllp_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 10, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_p_freq_table[] = { |
| { 12000000, 408000000, 34, 1, 0, 0 }, |
| { 38400000, 408000000, 85, 8, 0, 0 }, /* cf = 4.8MHz, allowed exception */ |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_p_params = { |
| .input_min = 9600000, |
| .input_max = 800000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 350000000, |
| .vco_max = 700000000, |
| .base_reg = PLLP_BASE, |
| .misc_reg = PLLP_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLP_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .iddq_reg = PLLP_MISC0, |
| .iddq_bit_idx = PLLXP_IDDQ_BIT, |
| .ext_misc_reg[0] = PLLP_MISC0, |
| .ext_misc_reg[1] = PLLP_MISC1, |
| .div_nmp = &pllp_nmp, |
| .freq_table = pll_p_freq_table, |
| .fixed_rate = 408000000, |
| .flags = TEGRA_PLL_FIXED | TEGRA_PLL_USE_LOCK | |
| TEGRA_PLL_HAS_LOCK_ENABLE | TEGRA_PLL_VCO_OUT, |
| .set_defaults = tegra210_pllp_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct tegra_clk_pll_params pll_a1_params = { |
| .input_min = 12000000, |
| .input_max = 700000000, |
| .cf_min = 12000000, |
| .cf_max = 50000000, |
| .vco_min = 600000000, |
| .vco_max = 1200000000, |
| .base_reg = PLLA1_BASE, |
| .misc_reg = PLLA1_MISC0, |
| .lock_mask = PLLCX_BASE_LOCK, |
| .lock_delay = 300, |
| .iddq_reg = PLLA1_MISC0, |
| .iddq_bit_idx = PLLCX_IDDQ_BIT, |
| .reset_reg = PLLA1_MISC0, |
| .reset_bit_idx = PLLCX_RESET_BIT, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllc_nmp, |
| .ext_misc_reg[0] = PLLA1_MISC0, |
| .ext_misc_reg[1] = PLLA1_MISC1, |
| .ext_misc_reg[2] = PLLA1_MISC2, |
| .ext_misc_reg[3] = PLLA1_MISC3, |
| .freq_table = pll_cx_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = _plla1_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| static struct div_nmp plla_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_a_freq_table[] = { |
| { 12000000, 282240000, 47, 1, 1, 1, 0xf148 }, /* actual: 282240234 */ |
| { 12000000, 368640000, 61, 1, 1, 1, 0xfe15 }, /* actual: 368640381 */ |
| { 12000000, 240000000, 60, 1, 2, 1, 0 }, |
| { 13000000, 282240000, 43, 1, 1, 1, 0xfd7d }, /* actual: 282239807 */ |
| { 13000000, 368640000, 56, 1, 1, 1, 0x06d8 }, /* actual: 368640137 */ |
| { 13000000, 240000000, 55, 1, 2, 1, 0 }, /* actual: 238.3 MHz */ |
| { 38400000, 282240000, 44, 3, 1, 1, 0xf333 }, /* actual: 282239844 */ |
| { 38400000, 368640000, 57, 3, 1, 1, 0x0333 }, /* actual: 368639844 */ |
| { 38400000, 240000000, 75, 3, 3, 1, 0 }, |
| { 0, 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_a_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 19200000, |
| .vco_min = 500000000, |
| .vco_max = 1000000000, |
| .base_reg = PLLA_BASE, |
| .misc_reg = PLLA_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLA_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .iddq_reg = PLLA_BASE, |
| .iddq_bit_idx = PLLA_IDDQ_BIT, |
| .div_nmp = &plla_nmp, |
| .sdm_din_reg = PLLA_MISC1, |
| .sdm_din_mask = PLLA_SDM_DIN_MASK, |
| .sdm_ctrl_reg = PLLA_MISC2, |
| .sdm_ctrl_en_mask = PLLA_SDM_EN_MASK, |
| .ext_misc_reg[0] = PLLA_MISC0, |
| .ext_misc_reg[1] = PLLA_MISC1, |
| .ext_misc_reg[2] = PLLA_MISC2, |
| .freq_table = pll_a_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_MDIV_NEW | |
| TEGRA_PLL_HAS_LOCK_ENABLE, |
| .set_defaults = tegra210_plla_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| .set_gain = tegra210_clk_pll_set_gain, |
| .adjust_vco = tegra210_clk_adjust_vco_min, |
| }; |
| |
| static struct div_nmp plld_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 11, |
| .divn_width = 8, |
| .divp_shift = 20, |
| .divp_width = 3, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_d_freq_table[] = { |
| { 12000000, 594000000, 99, 1, 1, 0, 0 }, |
| { 13000000, 594000000, 91, 1, 1, 0, 0xfc4f }, /* actual: 594000183 */ |
| { 38400000, 594000000, 30, 1, 1, 0, 0x0e00 }, |
| { 0, 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_d_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 38400000, |
| .vco_min = 750000000, |
| .vco_max = 1500000000, |
| .base_reg = PLLD_BASE, |
| .misc_reg = PLLD_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLD_MISC_LOCK_ENABLE, |
| .lock_delay = 1000, |
| .iddq_reg = PLLD_MISC0, |
| .iddq_bit_idx = PLLD_IDDQ_BIT, |
| .round_p_to_pdiv = pll_expo_p_to_pdiv, |
| .pdiv_tohw = pll_expo_pdiv_to_hw, |
| .div_nmp = &plld_nmp, |
| .sdm_din_reg = PLLD_MISC0, |
| .sdm_din_mask = PLLA_SDM_DIN_MASK, |
| .sdm_ctrl_reg = PLLD_MISC0, |
| .sdm_ctrl_en_mask = PLLD_SDM_EN_MASK, |
| .ext_misc_reg[0] = PLLD_MISC0, |
| .ext_misc_reg[1] = PLLD_MISC1, |
| .freq_table = pll_d_freq_table, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .mdiv_default = 1, |
| .set_defaults = tegra210_plld_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| .set_gain = tegra210_clk_pll_set_gain, |
| .adjust_vco = tegra210_clk_adjust_vco_min, |
| }; |
| |
| static struct tegra_clk_pll_freq_table tegra210_pll_d2_freq_table[] = { |
| { 12000000, 594000000, 99, 1, 1, 0, 0xf000 }, |
| { 13000000, 594000000, 91, 1, 1, 0, 0xfc4f }, /* actual: 594000183 */ |
| { 38400000, 594000000, 30, 1, 1, 0, 0x0e00 }, |
| { 0, 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| /* s/w policy, always tegra_pll_ref */ |
| static struct tegra_clk_pll_params pll_d2_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 38400000, |
| .vco_min = 750000000, |
| .vco_max = 1500000000, |
| .base_reg = PLLD2_BASE, |
| .misc_reg = PLLD2_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .iddq_reg = PLLD2_BASE, |
| .iddq_bit_idx = PLLSS_IDDQ_BIT, |
| .sdm_din_reg = PLLD2_MISC3, |
| .sdm_din_mask = PLLA_SDM_DIN_MASK, |
| .sdm_ctrl_reg = PLLD2_MISC1, |
| .sdm_ctrl_en_mask = PLLD2_SDM_EN_MASK, |
| .ssc_ctrl_reg = PLLD2_MISC1, |
| .ssc_ctrl_en_mask = PLLD2_SSC_EN_MASK, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllss_nmp, |
| .ext_misc_reg[0] = PLLD2_MISC0, |
| .ext_misc_reg[1] = PLLD2_MISC1, |
| .ext_misc_reg[2] = PLLD2_MISC2, |
| .ext_misc_reg[3] = PLLD2_MISC3, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .mdiv_default = 1, |
| .freq_table = tegra210_pll_d2_freq_table, |
| .set_defaults = tegra210_plld2_set_defaults, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| .set_gain = tegra210_clk_pll_set_gain, |
| .adjust_vco = tegra210_clk_adjust_vco_min, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_dp_freq_table[] = { |
| { 12000000, 270000000, 90, 1, 3, 0, 0xf000 }, |
| { 13000000, 270000000, 83, 1, 3, 0, 0xf000 }, /* actual: 269.8 MHz */ |
| { 38400000, 270000000, 28, 1, 3, 0, 0xf400 }, |
| { 0, 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_dp_params = { |
| .input_min = 12000000, |
| .input_max = 800000000, |
| .cf_min = 12000000, |
| .cf_max = 38400000, |
| .vco_min = 750000000, |
| .vco_max = 1500000000, |
| .base_reg = PLLDP_BASE, |
| .misc_reg = PLLDP_MISC, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLSS_MISC_LOCK_ENABLE, |
| .lock_delay = 300, |
| .iddq_reg = PLLDP_BASE, |
| .iddq_bit_idx = PLLSS_IDDQ_BIT, |
| .sdm_din_reg = PLLDP_SS_CTRL2, |
| .sdm_din_mask = PLLA_SDM_DIN_MASK, |
| .sdm_ctrl_reg = PLLDP_SS_CFG, |
| .sdm_ctrl_en_mask = PLLDP_SDM_EN_MASK, |
| .ssc_ctrl_reg = PLLDP_SS_CFG, |
| .ssc_ctrl_en_mask = PLLDP_SSC_EN_MASK, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllss_nmp, |
| .ext_misc_reg[0] = PLLDP_MISC, |
| .ext_misc_reg[1] = PLLDP_SS_CFG, |
| .ext_misc_reg[2] = PLLDP_SS_CTRL1, |
| .ext_misc_reg[3] = PLLDP_SS_CTRL2, |
| .max_p = PLL_QLIN_PDIV_MAX, |
| .mdiv_default = 1, |
| .freq_table = pll_dp_freq_table, |
| .set_defaults = tegra210_plldp_set_defaults, |
| .flags = TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| .set_gain = tegra210_clk_pll_set_gain, |
| .adjust_vco = tegra210_clk_adjust_vco_min, |
| }; |
| |
| static struct div_nmp pllu_nmp = { |
| .divm_shift = 0, |
| .divm_width = 8, |
| .divn_shift = 8, |
| .divn_width = 8, |
| .divp_shift = 16, |
| .divp_width = 5, |
| }; |
| |
| static struct tegra_clk_pll_freq_table pll_u_freq_table[] = { |
| { 12000000, 480000000, 40, 1, 0, 0 }, |
| { 13000000, 480000000, 36, 1, 0, 0 }, /* actual: 468.0 MHz */ |
| { 38400000, 480000000, 25, 2, 0, 0 }, |
| { 0, 0, 0, 0, 0, 0 }, |
| }; |
| |
| static struct tegra_clk_pll_params pll_u_vco_params = { |
| .input_min = 9600000, |
| .input_max = 800000000, |
| .cf_min = 9600000, |
| .cf_max = 19200000, |
| .vco_min = 350000000, |
| .vco_max = 700000000, |
| .base_reg = PLLU_BASE, |
| .misc_reg = PLLU_MISC0, |
| .lock_mask = PLL_BASE_LOCK, |
| .lock_enable_bit_idx = PLLU_MISC_LOCK_ENABLE, |
| .lock_delay = 1000, |
| .iddq_reg = PLLU_MISC0, |
| .iddq_bit_idx = PLLU_IDDQ_BIT, |
| .ext_misc_reg[0] = PLLU_MISC0, |
| .ext_misc_reg[1] = PLLU_MISC1, |
| .round_p_to_pdiv = pll_qlin_p_to_pdiv, |
| .pdiv_tohw = pll_qlin_pdiv_to_hw, |
| .div_nmp = &pllu_nmp, |
| .freq_table = pll_u_freq_table, |
| .flags = TEGRA_PLLU | TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE | |
| TEGRA_PLL_VCO_OUT, |
| .set_defaults = tegra210_pllu_set_defaults, |
| .calc_rate = tegra210_pll_fixed_mdiv_cfg, |
| }; |
| |
| struct utmi_clk_param { |
| /* Oscillator Frequency in KHz */ |
| u32 osc_frequency; |
| /* UTMIP PLL Enable Delay Count */ |
| u8 enable_delay_count; |
| /* UTMIP PLL Stable count */ |
| u16 stable_count; |
| /* UTMIP PLL Active delay count */ |
| u8 active_delay_count; |
| /* UTMIP PLL Xtal frequency count */ |
| u16 xtal_freq_count; |
| }; |
| |
| static const struct utmi_clk_param utmi_parameters[] = { |
| { |
| .osc_frequency = 38400000, .enable_delay_count = 0x0, |
| .stable_count = 0x0, .active_delay_count = 0x6, |
| .xtal_freq_count = 0x80 |
| }, { |
| .osc_frequency = 13000000, .enable_delay_count = 0x02, |
| .stable_count = 0x33, .active_delay_count = 0x05, |
| .xtal_freq_count = 0x7f |
| }, { |
| .osc_frequency = 19200000, .enable_delay_count = 0x03, |
| .stable_count = 0x4b, .active_delay_count = 0x06, |
| .xtal_freq_count = 0xbb |
| }, { |
| .osc_frequency = 12000000, .enable_delay_count = 0x02, |
| .stable_count = 0x2f, .active_delay_count = 0x08, |
| .xtal_freq_count = 0x76 |
| }, { |
| .osc_frequency = 26000000, .enable_delay_count = 0x04, |
| .stable_count = 0x66, .active_delay_count = 0x09, |
| .xtal_freq_count = 0xfe |
| }, { |
| .osc_frequency = 16800000, .enable_delay_count = 0x03, |
| .stable_count = 0x41, .active_delay_count = 0x0a, |
| .xtal_freq_count = 0xa4 |
| }, |
| }; |
| |
| static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = { |
| [tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true }, |
| [tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true }, |
| [tegra_clk_timer] = { .dt_id = TEGRA210_CLK_TIMER, .present = true }, |
| [tegra_clk_uarta_8] = { .dt_id = TEGRA210_CLK_UARTA, .present = true }, |
| [tegra_clk_sdmmc2_9] = { .dt_id = TEGRA210_CLK_SDMMC2, .present = true }, |
| [tegra_clk_i2s1] = { .dt_id = TEGRA210_CLK_I2S1, .present = true }, |
| [tegra_clk_i2c1] = { .dt_id = TEGRA210_CLK_I2C1, .present = true }, |
| [tegra_clk_sdmmc1_9] = { .dt_id = TEGRA210_CLK_SDMMC1, .present = true }, |
| [tegra_clk_sdmmc4_9] = { .dt_id = TEGRA210_CLK_SDMMC4, .present = true }, |
| [tegra_clk_pwm] = { .dt_id = TEGRA210_CLK_PWM, .present = true }, |
| [tegra_clk_i2s2] = { .dt_id = TEGRA210_CLK_I2S2, .present = true }, |
| [tegra_clk_usbd] = { .dt_id = TEGRA210_CLK_USBD, .present = true }, |
| [tegra_clk_isp_9] = { .dt_id = TEGRA210_CLK_ISP, .present = true }, |
| [tegra_clk_disp2_8] = { .dt_id = TEGRA210_CLK_DISP2, .present = true }, |
| [tegra_clk_disp1_8] = { .dt_id = TEGRA210_CLK_DISP1, .present = true }, |
| [tegra_clk_host1x_9] = { .dt_id = TEGRA210_CLK_HOST1X, .present = true }, |
| [tegra_clk_i2s0] = { .dt_id = TEGRA210_CLK_I2S0, .present = true }, |
| [tegra_clk_apbdma] = { .dt_id = TEGRA210_CLK_APBDMA, .present = true }, |
| [tegra_clk_kfuse] = { .dt_id = TEGRA210_CLK_KFUSE, .present = true }, |
| [tegra_clk_sbc1_9] = { .dt_id = TEGRA210_CLK_SBC1, .present = true }, |
| [tegra_clk_sbc2_9] = { .dt_id = TEGRA210_CLK_SBC2, .present = true }, |
| [tegra_clk_sbc3_9] = { .dt_id = TEGRA210_CLK_SBC3, .present = true }, |
| [tegra_clk_i2c5] = { .dt_id = TEGRA210_CLK_I2C5, .present = true }, |
| [tegra_clk_csi] = { .dt_id = TEGRA210_CLK_CSI, .present = true }, |
| [tegra_clk_i2c2] = { .dt_id = TEGRA210_CLK_I2C2, .present = true }, |
| [tegra_clk_uartc_8] = { .dt_id = TEGRA210_CLK_UARTC, .present = true }, |
| [tegra_clk_mipi_cal] = { .dt_id = TEGRA210_CLK_MIPI_CAL, .present = true }, |
| [tegra_clk_emc] = { .dt_id = TEGRA210_CLK_EMC, .present = true }, |
| [tegra_clk_usb2] = { .dt_id = TEGRA210_CLK_USB2, .present = true }, |
| [tegra_clk_bsev] = { .dt_id = TEGRA210_CLK_BSEV, .present = true }, |
| [tegra_clk_uartd_8] = { .dt_id = TEGRA210_CLK_UARTD, .present = true }, |
| [tegra_clk_i2c3] = { .dt_id = TEGRA210_CLK_I2C3, .present = true }, |
| [tegra_clk_sbc4_9] = { .dt_id = TEGRA210_CLK_SBC4, .present = true }, |
| [tegra_clk_sdmmc3_9] = { .dt_id = TEGRA210_CLK_SDMMC3, .present = true }, |
| [tegra_clk_pcie] = { .dt_id = TEGRA210_CLK_PCIE, .present = true }, |
| [tegra_clk_owr_8] = { .dt_id = TEGRA210_CLK_OWR, .present = true }, |
| [tegra_clk_afi] = { .dt_id = TEGRA210_CLK_AFI, .present = true }, |
| [tegra_clk_csite_8] = { .dt_id = TEGRA210_CLK_CSITE, .present = true }, |
| [tegra_clk_soc_therm_8] = { .dt_id = TEGRA210_CLK_SOC_THERM, .present = true }, |
| [tegra_clk_dtv] = { .dt_id = TEGRA210_CLK_DTV, .present = true }, |
| [tegra_clk_i2cslow] = { .dt_id = TEGRA210_CLK_I2CSLOW, .present = true }, |
| [tegra_clk_tsec_8] = { .dt_id = TEGRA210_CLK_TSEC, .present = true }, |
| [tegra_clk_xusb_host] = { .dt_id = TEGRA210_CLK_XUSB_HOST, .present = true }, |
| [tegra_clk_csus] = { .dt_id = TEGRA210_CLK_CSUS, .present = true }, |
| [tegra_clk_mselect] = { .dt_id = TEGRA210_CLK_MSELECT, .present = true }, |
| [tegra_clk_tsensor] = { .dt_id = TEGRA210_CLK_TSENSOR, .present = true }, |
| [tegra_clk_i2s3] = { .dt_id = TEGRA210_CLK_I2S3, .present = true }, |
| [tegra_clk_i2s4] = { .dt_id = TEGRA210_CLK_I2S4, .present = true }, |
| [tegra_clk_i2c4] = { .dt_id = TEGRA210_CLK_I2C4, .present = true }, |
| [tegra_clk_d_audio] = { .dt_id = TEGRA210_CLK_D_AUDIO, .present = true }, |
| [tegra_clk_hda2codec_2x_8] = { .dt_id = TEGRA210_CLK_HDA2CODEC_2X, .present = true }, |
| [tegra_clk_spdif_2x] = { .dt_id = TEGRA210_CLK_SPDIF_2X, .present = true }, |
| [tegra_clk_actmon] = { .dt_id = TEGRA210_CLK_ACTMON, .present = true }, |
| [tegra_clk_extern1] = { .dt_id = TEGRA210_CLK_EXTERN1, .present = true }, |
| [tegra_clk_extern2] = { .dt_id = TEGRA210_CLK_EXTERN2, .present = true }, |
| [tegra_clk_extern3] = { .dt_id = TEGRA210_CLK_EXTERN3, .present = true }, |
| [tegra_clk_sata_oob_8] = { .dt_id = TEGRA210_CLK_SATA_OOB, .present = true }, |
| [tegra_clk_sata_8] = { .dt_id = TEGRA210_CLK_SATA, .present = true }, |
| [tegra_clk_hda_8] = { .dt_id = TEGRA210_CLK_HDA, .present = true }, |
| [tegra_clk_hda2hdmi] = { .dt_id = TEGRA210_CLK_HDA2HDMI, .present = true }, |
| [tegra_clk_cilab] = { .dt_id = TEGRA210_CLK_CILAB, .present = true }, |
| [tegra_clk_cilcd] = { .dt_id = TEGRA210_CLK_CILCD, .present = true }, |
| [tegra_clk_cile] = { .dt_id = TEGRA210_CLK_CILE, .present = true }, |
| [tegra_clk_dsialp] = { .dt_id = TEGRA210_CLK_DSIALP, .present = true }, |
| [tegra_clk_dsiblp] = { .dt_id = TEGRA210_CLK_DSIBLP, .present = true }, |
| [tegra_clk_entropy_8] = { .dt_id = TEGRA210_CLK_ENTROPY, .present = true }, |
| [tegra_clk_xusb_ss] = { .dt_id = TEGRA210_CLK_XUSB_SS, .present = true }, |
| [tegra_clk_i2c6] = { .dt_id = TEGRA210_CLK_I2C6, .present = true }, |
| [tegra_clk_vim2_clk] = { .dt_id = TEGRA210_CLK_VIM2_CLK, .present = true }, |
| [tegra_clk_clk72Mhz_8] = { .dt_id = TEGRA210_CLK_CLK72MHZ, .present = true }, |
| [tegra_clk_vic03_8] = { .dt_id = TEGRA210_CLK_VIC03, .present = true }, |
| [tegra_clk_dpaux] = { .dt_id = TEGRA210_CLK_DPAUX, .present = true }, |
| [tegra_clk_sor0] = { .dt_id = TEGRA210_CLK_SOR0, .present = true }, |
| [tegra_clk_sor0_lvds] = { .dt_id = TEGRA210_CLK_SOR0_LVDS, .present = true }, |
| [tegra_clk_gpu] = { .dt_id = TEGRA210_CLK_GPU, .present = true }, |
| [tegra_clk_pll_g_ref] = { .dt_id = TEGRA210_CLK_PLL_G_REF, .present = true, }, |
| [tegra_clk_uartb_8] = { .dt_id = TEGRA210_CLK_UARTB, .present = true }, |
| [tegra_clk_vfir] = { .dt_id = TEGRA210_CLK_VFIR, .present = true }, |
| [tegra_clk_spdif_in_8] = { .dt_id = TEGRA210_CLK_SPDIF_IN, .present = true }, |
| [tegra_clk_spdif_out] = { .dt_id = TEGRA210_CLK_SPDIF_OUT, .present = true }, |
| [tegra_clk_vi_10] = { .dt_id = TEGRA210_CLK_VI, .present = true }, |
| [tegra_clk_vi_sensor_8] = { .dt_id = TEGRA210_CLK_VI_SENSOR, .present = true }, |
| [tegra_clk_fuse] = { .dt_id = TEGRA210_CLK_FUSE, .present = true }, |
| [tegra_clk_fuse_burn] = { .dt_id = TEGRA210_CLK_FUSE_BURN, .present = true }, |
| [tegra_clk_clk_32k] = { .dt_id = TEGRA210_CLK_CLK_32K, .present = true }, |
| [tegra_clk_clk_m] = { .dt_id = TEGRA210_CLK_CLK_M, .present = true }, |
| [tegra_clk_clk_m_div2] = { .dt_id = TEGRA210_CLK_CLK_M_DIV2, .present = true }, |
| [tegra_clk_clk_m_div4] = { .dt_id = TEGRA210_CLK_CLK_M_DIV4, .present = true }, |
| [tegra_clk_pll_ref] = { .dt_id = TEGRA210_CLK_PLL_REF, .present = true }, |
| [tegra_clk_pll_c] = { .dt_id = TEGRA210_CLK_PLL_C, .present = true }, |
| [tegra_clk_pll_c_out1] = { .dt_id = TEGRA210_CLK_PLL_C_OUT1, .present = true }, |
| [tegra_clk_pll_c2] = { .dt_id = TEGRA210_CLK_PLL_C2, .present = true }, |
| [tegra_clk_pll_c3] = { .dt_id = TEGRA210_CLK_PLL_C3, .present = true }, |
| [tegra_clk_pll_m] = { .dt_id = TEGRA210_CLK_PLL_M, .present = true }, |
| [tegra_clk_pll_m_out1] = { .dt_id = TEGRA210_CLK_PLL_M_OUT1, .present = true }, |
| [tegra_clk_pll_p] = { .dt_id = TEGRA210_CLK_PLL_P, .present = true }, |
| [tegra_clk_pll_p_out1] = { .dt_id = TEGRA210_CLK_PLL_P_OUT1, .present = true }, |
| [tegra_clk_pll_p_out3] = { .dt_id = TEGRA210_CLK_PLL_P_OUT3, .present = true }, |
| [tegra_clk_pll_p_out4_cpu] = { .dt_id = TEGRA210_CLK_PLL_P_OUT4, .present = true }, |
| [tegra_clk_pll_p_out_hsio] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_HSIO, .present = true }, |
| [tegra_clk_pll_p_out_xusb] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_XUSB, .present = true }, |
| [tegra_clk_pll_p_out_cpu] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_CPU, .present = true }, |
| [tegra_clk_pll_p_out_adsp] = { .dt_id = TEGRA210_CLK_PLL_P_OUT_ADSP, .present = true }, |
| [tegra_clk_pll_a] = { .dt_id = TEGRA210_CLK_PLL_A, .present = true }, |
| [tegra_clk_pll_a_out0] = { .dt_id = TEGRA210_CLK_PLL_A_OUT0, .present = true }, |
| [tegra_clk_pll_d] = { .dt_id = TEGRA210_CLK_PLL_D, .present = true }, |
| [tegra_clk_pll_d_out0] = { .dt_id = TEGRA210_CLK_PLL_D_OUT0, .present = true }, |
| [tegra_clk_pll_d2] = { .dt_id = TEGRA210_CLK_PLL_D2, .present = true }, |
| [tegra_clk_pll_d2_out0] = { .dt_id = TEGRA210_CLK_PLL_D2_OUT0, .present = true }, |
| [tegra_clk_pll_u] = { .dt_id = TEGRA210_CLK_PLL_U, .present = true }, |
| [tegra_clk_pll_u_out] = { .dt_id = TEGRA210_CLK_PLL_U_OUT, .present = true }, |
| [tegra_clk_pll_u_out1] = { .dt_id = TEGRA210_CLK_PLL_U_OUT1, .present = true }, |
| [tegra_clk_pll_u_out2] = { .dt_id = TEGRA210_CLK_PLL_U_OUT2, .present = true }, |
| [tegra_clk_pll_u_480m] = { .dt_id = TEGRA210_CLK_PLL_U_480M, .present = true }, |
| [tegra_clk_pll_u_60m] = { .dt_id = TEGRA210_CLK_PLL_U_60M, .present = true }, |
| [tegra_clk_pll_u_48m] = { .dt_id = TEGRA210_CLK_PLL_U_48M, .present = true }, |
| [tegra_clk_pll_x] = { .dt_id = TEGRA210_CLK_PLL_X, .present = true }, |
| [tegra_clk_pll_x_out0] = { .dt_id = TEGRA210_CLK_PLL_X_OUT0, .present = true }, |
| [tegra_clk_pll_re_vco] = { .dt_id = TEGRA210_CLK_PLL_RE_VCO, .present = true }, |
| [tegra_clk_pll_re_out] = { .dt_id = TEGRA210_CLK_PLL_RE_OUT, .present = true }, |
| [tegra_clk_spdif_in_sync] = { .dt_id = TEGRA210_CLK_SPDIF_IN_SYNC, .present = true }, |
| [tegra_clk_i2s0_sync] = { .dt_id = TEGRA210_CLK_I2S0_SYNC, .present = true }, |
| [tegra_clk_i2s1_sync] = { .dt_id = TEGRA210_CLK_I2S1_SYNC, .present = true }, |
| [tegra_clk_i2s2_sync] = { .dt_id = TEGRA210_CLK_I2S2_SYNC, .present = true }, |
| [tegra_clk_i2s3_sync] = { .dt_id = TEGRA210_CLK_I2S3_SYNC, .present = true }, |
| [tegra_clk_i2s4_sync] = { .dt_id = TEGRA210_CLK_I2S4_SYNC, .present = true }, |
| [tegra_clk_vimclk_sync] = { .dt_id = TEGRA210_CLK_VIMCLK_SYNC, .present = true }, |
| [tegra_clk_audio0] = { .dt_id = TEGRA210_CLK_AUDIO0, .present = true }, |
| [tegra_clk_audio1] = { .dt_id = TEGRA210_CLK_AUDIO1, .present = true }, |
| [tegra_clk_audio2] = { .dt_id = TEGRA210_CLK_AUDIO2, .present = true }, |
| [tegra_clk_audio3] = { .dt_id = TEGRA210_CLK_AUDIO3, .present = true }, |
| [tegra_clk_audio4] = { .dt_id = TEGRA210_CLK_AUDIO4, .present = true }, |
| [tegra_clk_spdif] = { .dt_id = TEGRA210_CLK_SPDIF, .present = true }, |
| [tegra_clk_clk_out_1] = { .dt_id = TEGRA210_CLK_CLK_OUT_1, .present = true }, |
| [tegra_clk_clk_out_2] = { .dt_id = TEGRA210_CLK_CLK_OUT_2, .present = true }, |
| [tegra_clk_clk_out_3] = { .dt_id = TEGRA210_CLK_CLK_OUT_3, .present = true }, |
| [tegra_clk_blink] = { .dt_id = TEGRA210_CLK_BLINK, .present = true }, |
| [tegra_clk_xusb_gate] = { .dt_id = TEGRA210_CLK_XUSB_GATE, .present = true }, |
| [tegra_clk_xusb_host_src_8] = { .dt_id = TEGRA210_CLK_XUSB_HOST_SRC, .present = true }, |
| [tegra_clk_xusb_falcon_src_8] = { .dt_id = TEGRA210_CLK_XUSB_FALCON_SRC, .present = true }, |
| [tegra_clk_xusb_fs_src] = { .dt_id = TEGRA210_CLK_XUSB_FS_SRC, .present = true }, |
| [tegra_clk_xusb_ss_src_8] = { .dt_id = TEGRA210_CLK_XUSB_SS_SRC, .present = true }, |
| [tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA210_CLK_XUSB_SS_DIV2, .present = true }, |
| [tegra_clk_xusb_dev_src_8] = { .dt_id = TEGRA210_CLK_XUSB_DEV_SRC, .present = true }, |
| [tegra_clk_xusb_dev] = { .dt_id = TEGRA210_CLK_XUSB_DEV, .present = true }, |
| [tegra_clk_xusb_hs_src_4] = { .dt_id = TEGRA210_CLK_XUSB_HS_SRC, .present = true }, |
| [tegra_clk_xusb_ssp_src] = { .dt_id = TEGRA210_CLK_XUSB_SSP_SRC, .present = true }, |
| [tegra_clk_usb2_hsic_trk] = { .dt_id = TEGRA210_CLK_USB2_HSIC_TRK, .present = true }, |
| [tegra_clk_hsic_trk] = { .dt_id = TEGRA210_CLK_HSIC_TRK, .present = true }, |
| [tegra_clk_usb2_trk] = { .dt_id = TEGRA210_CLK_USB2_TRK, .present = true }, |
| [tegra_clk_sclk] = { .dt_id = TEGRA210_CLK_SCLK, .present = true }, |
| [tegra_clk_sclk_mux] = { .dt_id = TEGRA210_CLK_SCLK_MUX, .present = true }, |
| [tegra_clk_hclk] = { .dt_id = TEGRA210_CLK_HCLK, .present = true }, |
| [tegra_clk_pclk] = { .dt_id = TEGRA210_CLK_PCLK, .present = true }, |
| [tegra_clk_cclk_g] = { .dt_id = TEGRA210_CLK_CCLK_G, .present = true }, |
| [tegra_clk_cclk_lp] = { .dt_id = TEGRA210_CLK_CCLK_LP, .present = true }, |
| [tegra_clk_dfll_ref] = { .dt_id = TEGRA210_CLK_DFLL_REF, .present = true }, |
| [tegra_clk_dfll_soc] = { .dt_id = TEGRA210_CLK_DFLL_SOC, .present = true }, |
| [tegra_clk_vi_sensor2_8] = { .dt_id = TEGRA210_CLK_VI_SENSOR2, .present = true }, |
| [tegra_clk_pll_p_out5] = { .dt_id = TEGRA210_CLK_PLL_P_OUT5, .present = true }, |
| [tegra_clk_pll_c4] = { .dt_id = TEGRA210_CLK_PLL_C4, .present = true }, |
| [tegra_clk_pll_dp] = { .dt_id = TEGRA210_CLK_PLL_DP, .present = true }, |
| [tegra_clk_audio0_mux] = { .dt_id = TEGRA210_CLK_AUDIO0_MUX, .present = true }, |
| [tegra_clk_audio1_mux] = { .dt_id = TEGRA210_CLK_AUDIO1_MUX, .present = true }, |
| [tegra_clk_audio2_mux] = { .dt_id = TEGRA210_CLK_AUDIO2_MUX, .present = true }, |
| [tegra_clk_audio3_mux] = { .dt_id = TEGRA210_CLK_AUDIO3_MUX, .present = true }, |
| [tegra_clk_audio4_mux] = { .dt_id = TEGRA210_CLK_AUDIO4_MUX, .present = true }, |
| [tegra_clk_spdif_mux] = { .dt_id = TEGRA210_CLK_SPDIF_MUX, .present = true }, |
| [tegra_clk_clk_out_1_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_1_MUX, .present = true }, |
| [tegra_clk_clk_out_2_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_2_MUX, .present = true }, |
| [tegra_clk_clk_out_3_mux] = { .dt_id = TEGRA210_CLK_CLK_OUT_3_MUX, .present = true }, |
| [tegra_clk_maud] = { .dt_id = TEGRA210_CLK_MAUD, .present = true }, |
| [tegra_clk_mipibif] = { .dt_id = TEGRA210_CLK_MIPIBIF, .present = true }, |
| [tegra_clk_qspi] = { .dt_id = TEGRA210_CLK_QSPI, .present = true }, |
| [tegra_clk_sdmmc_legacy] = { .dt_id = TEGRA210_CLK_SDMMC_LEGACY, .present = true }, |
| [tegra_clk_tsecb] = { .dt_id = TEGRA210_CLK_TSECB, .present = true }, |
| [tegra_clk_uartape] = { .dt_id = TEGRA210_CLK_UARTAPE, .present = true }, |
| [tegra_clk_vi_i2c] = { .dt_id = TEGRA210_CLK_VI_I2C, .present = true }, |
| [tegra_clk_ape] = { .dt_id = TEGRA210_CLK_APE, .present = true }, |
| [tegra_clk_dbgapb] = { .dt_id = TEGRA210_CLK_DBGAPB, .present = true }, |
| [tegra_clk_nvdec] = { .dt_id = TEGRA210_CLK_NVDEC, .present = true }, |
| [tegra_clk_nvenc] = { .dt_id = TEGRA210_CLK_NVENC, .present = true }, |
| [tegra_clk_nvjpg] = { .dt_id = TEGRA210_CLK_NVJPG, .present = true }, |
| [tegra_clk_pll_c4_out0] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT0, .present = true }, |
| [tegra_clk_pll_c4_out1] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT1, .present = true }, |
| [tegra_clk_pll_c4_out2] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT2, .present = true }, |
| [tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true }, |
| }; |
| |
| static struct tegra_devclk devclks[] __initdata = { |
| { .con_id = "clk_m", .dt_id = TEGRA210_CLK_CLK_M }, |
| { .con_id = "pll_ref", .dt_id = TEGRA210_CLK_PLL_REF }, |
| { .con_id = "clk_32k", .dt_id = TEGRA210_CLK_CLK_32K }, |
| { .con_id = "clk_m_div2", .dt_id = TEGRA210_CLK_CLK_M_DIV2 }, |
| { .con_id = "clk_m_div4", .dt_id = TEGRA210_CLK_CLK_M_DIV4 }, |
| { .con_id = "pll_c", .dt_id = TEGRA210_CLK_PLL_C }, |
| { .con_id = "pll_c_out1", .dt_id = TEGRA210_CLK_PLL_C_OUT1 }, |
| { .con_id = "pll_c2", .dt_id = TEGRA210_CLK_PLL_C2 }, |
| { .con_id = "pll_c3", .dt_id = TEGRA210_CLK_PLL_C3 }, |
| { .con_id = "pll_p", .dt_id = TEGRA210_CLK_PLL_P }, |
| { .con_id = "pll_p_out1", .dt_id = TEGRA210_CLK_PLL_P_OUT1 }, |
| { .con_id = "pll_p_out2", .dt_id = TEGRA210_CLK_PLL_P_OUT2 }, |
| { .con_id = "pll_p_out3", .dt_id = TEGRA210_CLK_PLL_P_OUT3 }, |
| { .con_id = "pll_p_out4", .dt_id = TEGRA210_CLK_PLL_P_OUT4 }, |
| { .con_id = "pll_m", .dt_id = TEGRA210_CLK_PLL_M }, |
| { .con_id = "pll_m_out1", .dt_id = TEGRA210_CLK_PLL_M_OUT1 }, |
| { .con_id = "pll_x", .dt_id = TEGRA210_CLK_PLL_X }, |
| { .con_id = "pll_x_out0", .dt_id = TEGRA210_CLK_PLL_X_OUT0 }, |
| { .con_id = "pll_u", .dt_id = TEGRA210_CLK_PLL_U }, |
| { .con_id = "pll_u_out", .dt_id = TEGRA210_CLK_PLL_U_OUT }, |
| { .con_id = "pll_u_out1", .dt_id = TEGRA210_CLK_PLL_U_OUT1 }, |
| { .con_id = "pll_u_out2", .dt_id = TEGRA210_CLK_PLL_U_OUT2 }, |
| { .con_id = "pll_u_480M", .dt_id = TEGRA210_CLK_PLL_U_480M }, |
| { .con_id = "pll_u_60M", .dt_id = TEGRA210_CLK_PLL_U_60M }, |
| { .con_id = "pll_u_48M", .dt_id = TEGRA210_CLK_PLL_U_48M }, |
| { .con_id = "pll_d", .dt_id = TEGRA210_CLK_PLL_D }, |
| { .con_id = "pll_d_out0", .dt_id = TEGRA210_CLK_PLL_D_OUT0 }, |
| { .con_id = "pll_d2", .dt_id = TEGRA210_CLK_PLL_D2 }, |
| { .con_id = "pll_d2_out0", .dt_id = TEGRA210_CLK_PLL_D2_OUT0 }, |
| { .con_id = "pll_a", .dt_id = TEGRA210_CLK_PLL_A }, |
| { .con_id = "pll_a_out0", .dt_id = TEGRA210_CLK_PLL_A_OUT0 }, |
| { .con_id = "pll_re_vco", .dt_id = TEGRA210_CLK_PLL_RE_VCO }, |
| { .con_id = "pll_re_out", .dt_id = TEGRA210_CLK_PLL_RE_OUT }, |
| { .con_id = "spdif_in_sync", .dt_id = TEGRA210_CLK_SPDIF_IN_SYNC }, |
| { .con_id = "i2s0_sync", .dt_id = TEGRA210_CLK_I2S0_SYNC }, |
| { .con_id = "i2s1_sync", .dt_id = TEGRA210_CLK_I2S1_SYNC }, |
| { .con_id = "i2s2_sync", .dt_id = TEGRA210_CLK_I2S2_SYNC }, |
| { .con_id = "i2s3_sync", .dt_id = TEGRA210_CLK_I2S3_SYNC }, |
| { .con_id = "i2s4_sync", .dt_id = TEGRA210_CLK_I2S4_SYNC }, |
| { .con_id = "vimclk_sync", .dt_id = TEGRA210_CLK_VIMCLK_SYNC }, |
| { .con_id = "audio0", .dt_id = TEGRA210_CLK_AUDIO0 }, |
| { .con_id = "audio1", .dt_id = TEGRA210_CLK_AUDIO1 }, |
| { .con_id = "audio2", .dt_id = TEGRA210_CLK_AUDIO2 }, |
| { .con_id = "audio3", .dt_id = TEGRA210_CLK_AUDIO3 }, |
| { .con_id = "audio4", .dt_id = TEGRA210_CLK_AUDIO4 }, |
| { .con_id = "spdif", .dt_id = TEGRA210_CLK_SPDIF }, |
| { .con_id = "spdif_2x", .dt_id = TEGRA210_CLK_SPDIF_2X }, |
| { .con_id = "extern1", .dev_id = "clk_out_1", .dt_id = TEGRA210_CLK_EXTERN1 }, |
| { .con_id = "extern2", .dev_id = "clk_out_2", .dt_id = TEGRA210_CLK_EXTERN2 }, |
| { .con_id = "extern3", .dev_id = "clk_out_3", .dt_id = TEGRA210_CLK_EXTERN3 }, |
| { .con_id = "blink", .dt_id = TEGRA210_CLK_BLINK }, |
| { .con_id = "cclk_g", .dt_id = TEGRA210_CLK_CCLK_G }, |
| { .con_id = "cclk_lp", .dt_id = TEGRA210_CLK_CCLK_LP }, |
| { .con_id = "sclk", .dt_id = TEGRA210_CLK_SCLK }, |
| { .con_id = "hclk", .dt_id = TEGRA210_CLK_HCLK }, |
| { .con_id = "pclk", .dt_id = TEGRA210_CLK_PCLK }, |
| { .con_id = "fuse", .dt_id = TEGRA210_CLK_FUSE }, |
| { .dev_id = "rtc-tegra", .dt_id = TEGRA210_CLK_RTC }, |
| { .dev_id = "timer", .dt_id = TEGRA210_CLK_TIMER }, |
| { .con_id = "pll_c4_out0", .dt_id = TEGRA210_CLK_PLL_C4_OUT0 }, |
| { .con_id = "pll_c4_out1", .dt_id = TEGRA210_CLK_PLL_C4_OUT1 }, |
| { .con_id = "pll_c4_out2", .dt_id = TEGRA210_CLK_PLL_C4_OUT2 }, |
| { .con_id = "pll_c4_out3", .dt_id = TEGRA210_CLK_PLL_C4_OUT3 }, |
| { .con_id = "dpaux", .dt_id = TEGRA210_CLK_DPAUX }, |
| { .con_id = "sor0", .dt_id = TEGRA210_CLK_SOR0 }, |
| }; |
| |
| static struct tegra_audio_clk_info tegra210_audio_plls[] = { |
| { "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_ref" }, |
| { "pll_a1", &pll_a1_params, tegra_clk_pll_a1, "pll_ref" }, |
| }; |
| |
| static struct clk **clks; |
| |
| static void tegra210_utmi_param_configure(void __iomem *clk_base) |
| { |
| u32 reg; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) { |
| if (osc_freq == utmi_parameters[i].osc_frequency) |
| break; |
| } |
| |
| if (i >= ARRAY_SIZE(utmi_parameters)) { |
| pr_err("%s: Unexpected oscillator freq %lu\n", __func__, |
| osc_freq); |
| return; |
| } |
| |
| reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); |
| reg |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE | |
| PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT | |
| PLLU_HW_PWRDN_CFG0_USE_LOCKDET; |
| reg &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL | |
| PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL); |
| writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); |
| |
| reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0); |
| reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE; |
| writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0); |
| udelay(1); |
| |
| reg = readl_relaxed(clk_base + PLLU_BASE); |
| reg &= ~PLLU_BASE_CLKENABLE_USB; |
| writel_relaxed(reg, clk_base + PLLU_BASE); |
| |
| reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE; |
| writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| |
| udelay(10); |
| |
| reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); |
| |
| /* Program UTMIP PLL stable and active counts */ |
| /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */ |
| reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0); |
| reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count); |
| |
| reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0); |
| |
| reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i]. |
| active_delay_count); |
| writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); |
| |
| /* Program UTMIP PLL delay and oscillator frequency counts */ |
| reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); |
| reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0); |
| |
| reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i]. |
| enable_delay_count); |
| |
| reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0); |
| reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i]. |
| xtal_freq_count); |
| |
| reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN; |
| writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); |
| |
| /* Remove power downs from UTMIP PLL control bits */ |
| reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); |
| reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; |
| reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; |
| writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); |
| udelay(1); |
| |
| /* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */ |
| reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2); |
| reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP; |
| reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP; |
| reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP; |
| reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN; |
| reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN; |
| reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN; |
| writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2); |
| |
| /* Setup HW control of UTMIPLL */ |
| reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1); |
| reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN; |
| reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP; |
| writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1); |
| |
| reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET; |
| reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL; |
| writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| |
| udelay(1); |
| |
| reg = readl_relaxed(clk_base + XUSB_PLL_CFG0); |
| reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY; |
| writel_relaxed(reg, clk_base + XUSB_PLL_CFG0); |
| |
| udelay(1); |
| |
| /* Enable HW control UTMIPLL */ |
| reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE; |
| writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0); |
| } |
| |
| static __init void tegra210_periph_clk_init(void __iomem *clk_base, |
| void __iomem *pmc_base) |
| { |
| struct clk *clk; |
| |
| /* xusb_ss_div2 */ |
| clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0, |
| 1, 2); |
| clks[TEGRA210_CLK_XUSB_SS_DIV2] = clk; |
| |
| /* pll_d_dsi_out */ |
| clk = clk_register_gate(NULL, "pll_d_dsi_out", "pll_d_out0", 0, |
| clk_base + PLLD_MISC0, 21, 0, &pll_d_lock); |
| clks[TEGRA210_CLK_PLL_D_DSI_OUT] = clk; |
| |
| /* dsia */ |
| clk = tegra_clk_register_periph_gate("dsia", "pll_d_dsi_out", 0, |
| clk_base, 0, 48, |
| periph_clk_enb_refcnt); |
| clks[TEGRA210_CLK_DSIA] = clk; |
| |
| /* dsib */ |
| clk = tegra_clk_register_periph_gate("dsib", "pll_d_dsi_out", 0, |
| clk_base, 0, 82, |
| periph_clk_enb_refcnt); |
| clks[TEGRA210_CLK_DSIB] = clk; |
| |
| /* emc mux */ |
| clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm, |
| ARRAY_SIZE(mux_pllmcp_clkm), 0, |
| clk_base + CLK_SOURCE_EMC, |
| 29, 3, 0, &emc_lock); |
| |
| clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC, |
| &emc_lock); |
| clks[TEGRA210_CLK_MC] = clk; |
| |
| /* cml0 */ |
| clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX, |
| 0, 0, &pll_e_lock); |
| clk_register_clkdev(clk, "cml0", NULL); |
| clks[TEGRA210_CLK_CML0] = clk; |
| |
| /* cml1 */ |
| clk = clk_register_gate(NULL, "cml1", "pll_e", 0, clk_base + PLLE_AUX, |
| 1, 0, &pll_e_lock); |
| clk_register_clkdev(clk, "cml1", NULL); |
| clks[TEGRA210_CLK_CML1] = clk; |
| |
| tegra_periph_clk_init(clk_base, pmc_base, tegra210_clks, &pll_p_params); |
| } |
| |
| static void __init tegra210_pll_init(void __iomem *clk_base, |
| void __iomem *pmc) |
| { |
| u32 val; |
| struct clk *clk; |
| |
| /* PLLC */ |
| clk = tegra_clk_register_pllxc_tegra210("pll_c", "pll_ref", clk_base, |
| pmc, 0, &pll_c_params, NULL); |
| if (!WARN_ON(IS_ERR(clk))) |
| clk_register_clkdev(clk, "pll_c", NULL); |
| clks[TEGRA210_CLK_PLL_C] = clk; |
| |
| /* PLLC_OUT1 */ |
| clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c", |
| clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP, |
| 8, 8, 1, NULL); |
| clk = tegra_clk_register_pll_out("pll_c_out1", "pll_c_out1_div", |
| clk_base + PLLC_OUT, 1, 0, |
| CLK_SET_RATE_PARENT, 0, NULL); |
| clk_register_clkdev(clk, "pll_c_out1", NULL); |
| clks[TEGRA210_CLK_PLL_C_OUT1] = clk; |
| |
| /* PLLC_UD */ |
| clk = clk_register_fixed_factor(NULL, "pll_c_ud", "pll_c", |
| CLK_SET_RATE_PARENT, 1, 1); |
| clk_register_clkdev(clk, "pll_c_ud", NULL); |
| clks[TEGRA210_CLK_PLL_C_UD] = clk; |
| |
| /* PLLC2 */ |
| clk = tegra_clk_register_pllc_tegra210("pll_c2", "pll_ref", clk_base, |
| pmc, 0, &pll_c2_params, NULL); |
| clk_register_clkdev(clk, "pll_c2", NULL); |
| clks[TEGRA210_CLK_PLL_C2] = clk; |
| |
| /* PLLC3 */ |
| clk = tegra_clk_register_pllc_tegra210("pll_c3", "pll_ref", clk_base, |
| pmc, 0, &pll_c3_params, NULL); |
| clk_register_clkdev(clk, "pll_c3", NULL); |
| clks[TEGRA210_CLK_PLL_C3] = clk; |
| |
| /* PLLM */ |
| clk = tegra_clk_register_pllm("pll_m", "osc", clk_base, pmc, |
| CLK_SET_RATE_GATE, &pll_m_params, NULL); |
| clk_register_clkdev(clk, "pll_m", NULL); |
| clks[TEGRA210_CLK_PLL_M] = clk; |
| |
| /* PLLMB */ |
| clk = tegra_clk_register_pllmb("pll_mb", "osc", clk_base, pmc, |
| CLK_SET_RATE_GATE, &pll_mb_params, NULL); |
| clk_register_clkdev(clk, "pll_mb", NULL); |
| clks[TEGRA210_CLK_PLL_MB] = clk; |
| |
| clk_register_clkdev(clk, "pll_m_out1", NULL); |
| clks[TEGRA210_CLK_PLL_M_OUT1] = clk; |
| |
| /* PLLM_UD */ |
| clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", |
| CLK_SET_RATE_PARENT, 1, 1); |
| clk_register_clkdev(clk, "pll_m_ud", NULL); |
| clks[TEGRA210_CLK_PLL_M_UD] = clk; |
| |
| /* PLLU_VCO */ |
| val = readl(clk_base + pll_u_vco_params.base_reg); |
| val &= ~BIT(24); /* disable PLLU_OVERRIDE */ |
| writel(val, clk_base + pll_u_vco_params.base_reg); |
| |
| clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc, |
| 0, &pll_u_vco_params, &pll_u_lock, pll_ref_freq); |
| clk_register_clkdev(clk, "pll_u_vco", NULL); |
| clks[TEGRA210_CLK_PLL_U] = clk; |
| |
| /* PLLU_OUT */ |
| clk = clk_register_divider_table(NULL, "pll_u_out", "pll_u_vco", 0, |
| clk_base + PLLU_BASE, 16, 4, 0, |
| pll_vco_post_div_table, NULL); |
| clk_register_clkdev(clk, "pll_u_out", NULL); |
| clks[TEGRA210_CLK_PLL_U_OUT] = clk; |
| |
| /* PLLU_OUT1 */ |
| clk = tegra_clk_register_divider("pll_u_out1_div", "pll_u_out", |
| clk_base + PLLU_OUTA, 0, |
| TEGRA_DIVIDER_ROUND_UP, |
| 8, 8, 1, &pll_u_lock); |
| clk = tegra_clk_register_pll_out("pll_u_out1", "pll_u_out1_div", |
| clk_base + PLLU_OUTA, 1, 0, |
| CLK_SET_RATE_PARENT, 0, &pll_u_lock); |
| clk_register_clkdev(clk, "pll_u_out1", NULL); |
| clks[TEGRA210_CLK_PLL_U_OUT1] = clk; |
| |
| /* PLLU_OUT2 */ |
| clk = tegra_clk_register_divider("pll_u_out2_div", "pll_u_out", |
| clk_base + PLLU_OUTA, 0, |
| TEGRA_DIVIDER_ROUND_UP, |
| 24, 8, 1, &pll_u_lock); |
| clk = tegra_clk_register_pll_out("pll_u_out2", "pll_u_out2_div", |
| clk_base + PLLU_OUTA, 17, 16, |
| CLK_SET_RATE_PARENT, 0, &pll_u_lock); |
| clk_register_clkdev(clk, "pll_u_out2", NULL); |
| clks[TEGRA210_CLK_PLL_U_OUT2] = clk; |
| |
| tegra210_utmi_param_configure(clk_base); |
| |
| /* PLLU_480M */ |
| clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco", |
| CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, |
| 22, 0, &pll_u_lock); |
| clk_register_clkdev(clk, "pll_u_480M", NULL); |
| clks[TEGRA210_CLK_PLL_U_480M] = clk; |
| |
| /* PLLU_60M */ |
| clk = clk_register_gate(NULL, "pll_u_60M", "pll_u_out2", |
| CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, |
| 23, 0, NULL); |
| clk_register_clkdev(clk, "pll_u_60M", NULL); |
| clks[TEGRA210_CLK_PLL_U_60M] = clk; |
| |
| /* PLLU_48M */ |
| clk = clk_register_gate(NULL, "pll_u_48M", "pll_u_out1", |
| CLK_SET_RATE_PARENT, clk_base + PLLU_BASE, |
| 25, 0, NULL); |
| clk_register_clkdev(clk, "pll_u_48M", NULL); |
| clks[TEGRA210_CLK_PLL_U_48M] = clk; |
| |
| /* PLLD */ |
| clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc, 0, |
| &pll_d_params, &pll_d_lock); |
| clk_register_clkdev(clk, "pll_d", NULL); |
| clks[TEGRA210_CLK_PLL_D] = clk; |
| |
| /* PLLD_OUT0 */ |
| clk = clk_register_fixed_factor(NULL, "pll_d_out0", "pll_d", |
| CLK_SET_RATE_PARENT, 1, 2); |
| clk_register_clkdev(clk, "pll_d_out0", NULL); |
| clks[TEGRA210_CLK_PLL_D_OUT0] = clk; |
| |
| /* PLLRE */ |
| clk = tegra_clk_register_pllre("pll_re_vco", "pll_ref", clk_base, pmc, |
| 0, &pll_re_vco_params, &pll_re_lock, pll_ref_freq); |
| clk_register_clkdev(clk, "pll_re_vco", NULL); |
| clks[TEGRA210_CLK_PLL_RE_VCO] = clk; |
| |
| clk = clk_register_divider_table(NULL, "pll_re_out", "pll_re_vco", 0, |
| clk_base + PLLRE_BASE, 16, 5, 0, |
| pll_vco_post_div_table, &pll_re_lock); |
| clk_register_clkdev(clk, "pll_re_out", NULL); |
| clks[TEGRA210_CLK_PLL_RE_OUT] = clk; |
| |
| /* PLLE */ |
| clk = tegra_clk_register_plle_tegra210("pll_e", "pll_ref", |
| clk_base, 0, &pll_e_params, NULL); |
| clk_register_clkdev(clk, "pll_e", NULL); |
| clks[TEGRA210_CLK_PLL_E] = clk; |
| |
| /* PLLC4 */ |
| clk = tegra_clk_register_pllre("pll_c4_vco", "pll_ref", clk_base, pmc, |
| 0, &pll_c4_vco_params, NULL, pll_ref_freq); |
| clk_register_clkdev(clk, "pll_c4_vco", NULL); |
| clks[TEGRA210_CLK_PLL_C4] = clk; |
| |
| /* PLLC4_OUT0 */ |
| clk = clk_register_divider_table(NULL, "pll_c4_out0", "pll_c4_vco", 0, |
| clk_base + PLLC4_BASE, 19, 4, 0, |
| pll_vco_post_div_table, NULL); |
| clk_register_clkdev(clk, "pll_c4_out0", NULL); |
| clks[TEGRA210_CLK_PLL_C4_OUT0] = clk; |
| |
| /* PLLC4_OUT1 */ |
| clk = clk_register_fixed_factor(NULL, "pll_c4_out1", "pll_c4_vco", |
| CLK_SET_RATE_PARENT, 1, 3); |
| clk_register_clkdev(clk, "pll_c4_out1", NULL); |
| clks[TEGRA210_CLK_PLL_C4_OUT1] = clk; |
| |
| /* PLLC4_OUT2 */ |
| clk = clk_register_fixed_factor(NULL, "pll_c4_out2", "pll_c4_vco", |
| CLK_SET_RATE_PARENT, 1, 5); |
| clk_register_clkdev(clk, "pll_c4_out2", NULL); |
| clks[TEGRA210_CLK_PLL_C4_OUT2] = clk; |
| |
| /* PLLC4_OUT3 */ |
| clk = tegra_clk_register_divider("pll_c4_out3_div", "pll_c4_out0", |
| clk_base + PLLC4_OUT, 0, TEGRA_DIVIDER_ROUND_UP, |
| 8, 8, 1, NULL); |
| clk = tegra_clk_register_pll_out("pll_c4_out3", "pll_c4_out3_div", |
| clk_base + PLLC4_OUT, 1, 0, |
| CLK_SET_RATE_PARENT, 0, NULL); |
| clk_register_clkdev(clk, "pll_c4_out3", NULL); |
| clks[TEGRA210_CLK_PLL_C4_OUT3] = clk; |
| |
| /* PLLDP */ |
| clk = tegra_clk_register_pllss_tegra210("pll_dp", "pll_ref", clk_base, |
| 0, &pll_dp_params, NULL); |
| clk_register_clkdev(clk, "pll_dp", NULL); |
| clks[TEGRA210_CLK_PLL_DP] = clk; |
| |
| /* PLLD2 */ |
| clk = tegra_clk_register_pllss_tegra210("pll_d2", "pll_ref", clk_base, |
| 0, &pll_d2_params, NULL); |
| clk_register_clkdev(clk, "pll_d2", NULL); |
| clks[TEGRA210_CLK_PLL_D2] = clk; |
| |
| /* PLLD2_OUT0 */ |
| clk = clk_register_fixed_factor(NULL, "pll_d2_out0", "pll_d2", |
| CLK_SET_RATE_PARENT, 1, 1); |
| clk_register_clkdev(clk, "pll_d2_out0", NULL); |
| clks[TEGRA210_CLK_PLL_D2_OUT0] = clk; |
| |
| /* PLLP_OUT2 */ |
| clk = clk_register_fixed_factor(NULL, "pll_p_out2", "pll_p", |
| CLK_SET_RATE_PARENT, 1, 2); |
| clk_register_clkdev(clk, "pll_p_out2", NULL); |
| clks[TEGRA210_CLK_PLL_P_OUT2] = clk; |
| |
| } |
| |
| /* Tegra210 CPU clock and reset control functions */ |
| static void tegra210_wait_cpu_in_reset(u32 cpu) |
| { |
| unsigned int reg; |
| |
| do { |
| reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); |
| cpu_relax(); |
| } while (!(reg & (1 << cpu))); /* check CPU been reset or not */ |
| } |
| |
| static void tegra210_disable_cpu_clock(u32 cpu) |
| { |
| /* flow controller would take care in the power sequence. */ |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static void tegra210_cpu_clock_suspend(void) |
| { |
| /* switch coresite to clk_m, save off original source */ |
| tegra210_cpu_clk_sctx.clk_csite_src = |
| readl(clk_base + CLK_SOURCE_CSITE); |
| writel(3 << 30, clk_base + CLK_SOURCE_CSITE); |
| } |
| |
| static void tegra210_cpu_clock_resume(void) |
| { |
| writel(tegra210_cpu_clk_sctx.clk_csite_src, |
| clk_base + CLK_SOURCE_CSITE); |
| } |
| #endif |
| |
| static struct tegra_cpu_car_ops tegra210_cpu_car_ops = { |
| .wait_for_reset = tegra210_wait_cpu_in_reset, |
| .disable_clock = tegra210_disable_cpu_clock, |
| #ifdef CONFIG_PM_SLEEP |
| .suspend = tegra210_cpu_clock_suspend, |
| .resume = tegra210_cpu_clock_resume, |
| #endif |
| }; |
| |
| static const struct of_device_id pmc_match[] __initconst = { |
| { .compatible = "nvidia,tegra210-pmc" }, |
| { }, |
| }; |
| |
| static struct tegra_clk_init_table init_table[] __initdata = { |
| { TEGRA210_CLK_UARTA, TEGRA210_CLK_PLL_P, 408000000, 0 }, |
| { TEGRA210_CLK_UARTB, TEGRA210_CLK_PLL_P, 408000000, 0 }, |
| { TEGRA210_CLK_UARTC, TEGRA210_CLK_PLL_P, 408000000, 0 }, |
| { TEGRA210_CLK_UARTD, TEGRA210_CLK_PLL_P, 408000000, 0 }, |
| { TEGRA210_CLK_PLL_A, TEGRA210_CLK_CLK_MAX, 564480000, 1 }, |
| { TEGRA210_CLK_PLL_A_OUT0, TEGRA210_CLK_CLK_MAX, 11289600, 1 }, |
| { TEGRA210_CLK_EXTERN1, TEGRA210_CLK_PLL_A_OUT0, 0, 1 }, |
| { TEGRA210_CLK_CLK_OUT_1_MUX, TEGRA210_CLK_EXTERN1, 0, 1 }, |
| { TEGRA210_CLK_CLK_OUT_1, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| { TEGRA210_CLK_I2S0, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, |
| { TEGRA210_CLK_I2S1, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, |
| { TEGRA210_CLK_I2S2, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, |
| { TEGRA210_CLK_I2S3, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, |
| { TEGRA210_CLK_I2S4, TEGRA210_CLK_PLL_A_OUT0, 11289600, 0 }, |
| { TEGRA210_CLK_HOST1X, TEGRA210_CLK_PLL_P, 136000000, 1 }, |
| { TEGRA210_CLK_SCLK_MUX, TEGRA210_CLK_PLL_P, 0, 1 }, |
| { TEGRA210_CLK_SCLK, TEGRA210_CLK_CLK_MAX, 102000000, 1 }, |
| { TEGRA210_CLK_DFLL_SOC, TEGRA210_CLK_PLL_P, 51000000, 1 }, |
| { TEGRA210_CLK_DFLL_REF, TEGRA210_CLK_PLL_P, 51000000, 1 }, |
| { TEGRA210_CLK_SBC4, TEGRA210_CLK_PLL_P, 12000000, 1 }, |
| { TEGRA210_CLK_PLL_RE_VCO, TEGRA210_CLK_CLK_MAX, 672000000, 1 }, |
| { TEGRA210_CLK_PLL_U_OUT1, TEGRA210_CLK_CLK_MAX, 48000000, 1 }, |
| { TEGRA210_CLK_PLL_U_OUT2, TEGRA210_CLK_CLK_MAX, 60000000, 1 }, |
| { TEGRA210_CLK_XUSB_GATE, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| { TEGRA210_CLK_XUSB_SS_SRC, TEGRA210_CLK_PLL_U_480M, 120000000, 0 }, |
| { TEGRA210_CLK_XUSB_FS_SRC, TEGRA210_CLK_PLL_U_48M, 48000000, 0 }, |
| { TEGRA210_CLK_XUSB_HS_SRC, TEGRA210_CLK_XUSB_SS_SRC, 120000000, 0 }, |
| { TEGRA210_CLK_XUSB_SSP_SRC, TEGRA210_CLK_XUSB_SS_SRC, 120000000, 0 }, |
| { TEGRA210_CLK_XUSB_FALCON_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 204000000, 0 }, |
| { TEGRA210_CLK_XUSB_HOST_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 102000000, 0 }, |
| { TEGRA210_CLK_XUSB_DEV_SRC, TEGRA210_CLK_PLL_P_OUT_XUSB, 102000000, 0 }, |
| { TEGRA210_CLK_SATA, TEGRA210_CLK_PLL_P, 104000000, 0 }, |
| { TEGRA210_CLK_SATA_OOB, TEGRA210_CLK_PLL_P, 204000000, 0 }, |
| { TEGRA210_CLK_EMC, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| { TEGRA210_CLK_MSELECT, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| { TEGRA210_CLK_CSITE, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| { TEGRA210_CLK_TSENSOR, TEGRA210_CLK_CLK_M, 400000, 0 }, |
| { TEGRA210_CLK_I2C1, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_I2C2, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_I2C3, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_I2C4, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_I2C5, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_I2C6, TEGRA210_CLK_PLL_P, 0, 0 }, |
| { TEGRA210_CLK_PLL_DP, TEGRA210_CLK_CLK_MAX, 270000000, 0 }, |
| { TEGRA210_CLK_SOC_THERM, TEGRA210_CLK_PLL_P, 51000000, 0 }, |
| { TEGRA210_CLK_CCLK_G, TEGRA210_CLK_CLK_MAX, 0, 1 }, |
| /* This MUST be the last entry. */ |
| { TEGRA210_CLK_CLK_MAX, TEGRA210_CLK_CLK_MAX, 0, 0 }, |
| }; |
| |
| /** |
| * tegra210_clock_apply_init_table - initialize clocks on Tegra210 SoCs |
| * |
| * Program an initial clock rate and enable or disable clocks needed |
| * by the rest of the kernel, for Tegra210 SoCs. It is intended to be |
| * called by assigning a pointer to it to tegra_clk_apply_init_table - |
| * this will be called as an arch_initcall. No return value. |
| */ |
| static void __init tegra210_clock_apply_init_table(void) |
| { |
| tegra_init_from_table(init_table, clks, TEGRA210_CLK_CLK_MAX); |
| } |
| |
| /** |
| * tegra210_clock_init - Tegra210-specific clock initialization |
| * @np: struct device_node * of the DT node for the SoC CAR IP block |
| * |
| * Register most SoC clocks for the Tegra210 system-on-chip. Intended |
| * to be called by the OF init code when a DT node with the |
| * "nvidia,tegra210-car" string is encountered, and declared with |
| * CLK_OF_DECLARE. No return value. |
| */ |
| static void __init tegra210_clock_init(struct device_node *np) |
| { |
| struct device_node *node; |
| u32 value, clk_m_div; |
| |
| clk_base = of_iomap(np, 0); |
| if (!clk_base) { |
| pr_err("ioremap tegra210 CAR failed\n"); |
| return; |
| } |
| |
| node = of_find_matching_node(NULL, pmc_match); |
| if (!node) { |
| pr_err("Failed to find pmc node\n"); |
| WARN_ON(1); |
| return; |
| } |
| |
| pmc_base = of_iomap(node, 0); |
| if (!pmc_base) { |
| pr_err("Can't map pmc registers\n"); |
| WARN_ON(1); |
| return; |
| } |
| |
| clks = tegra_clk_init(clk_base, TEGRA210_CLK_CLK_MAX, |
| TEGRA210_CAR_BANK_COUNT); |
| if (!clks) |
| return; |
| |
| value = clk_readl(clk_base + SPARE_REG0) >> CLK_M_DIVISOR_SHIFT; |
| clk_m_div = (value & CLK_M_DIVISOR_MASK) + 1; |
| |
| if (tegra_osc_clk_init(clk_base, tegra210_clks, tegra210_input_freq, |
| ARRAY_SIZE(tegra210_input_freq), clk_m_div, |
| &osc_freq, &pll_ref_freq) < 0) |
| return; |
| |
| tegra_fixed_clk_init(tegra210_clks); |
| tegra210_pll_init(clk_base, pmc_base); |
| tegra210_periph_clk_init(clk_base, pmc_base); |
| tegra_audio_clk_init(clk_base, pmc_base, tegra210_clks, |
| tegra210_audio_plls, |
| ARRAY_SIZE(tegra210_audio_plls)); |
| tegra_pmc_clk_init(pmc_base, tegra210_clks); |
| |
| /* For Tegra210, PLLD is the only source for DSIA & DSIB */ |
| value = clk_readl(clk_base + PLLD_BASE); |
| value &= ~BIT(25); |
| clk_writel(value, clk_base + PLLD_BASE); |
| |
| tegra_clk_apply_init_table = tegra210_clock_apply_init_table; |
| |
| tegra_super_clk_gen5_init(clk_base, pmc_base, tegra210_clks, |
| &pll_x_params); |
| tegra_add_of_provider(np); |
| tegra_register_devclks(devclks, ARRAY_SIZE(devclks)); |
| |
| tegra_cpu_car_ops = &tegra210_cpu_car_ops; |
| } |
| CLK_OF_DECLARE(tegra210, "nvidia,tegra210-car", tegra210_clock_init); |