| /* |
| * Net1080 based USB host-to-host cables |
| * Copyright (C) 2000-2005 by David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| // #define DEBUG // error path messages, extra info |
| // #define VERBOSE // more; success messages |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/workqueue.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include "usbnet.h" |
| |
| |
| /* |
| * Netchip 1080 driver ... http://www.netchip.com |
| * (Sept 2004: End-of-life announcement has been sent.) |
| * Used in (some) LapLink cables |
| */ |
| |
| #define frame_errors data[1] |
| |
| /* |
| * NetChip framing of ethernet packets, supporting additional error |
| * checks for links that may drop bulk packets from inside messages. |
| * Odd USB length == always short read for last usb packet. |
| * - nc_header |
| * - Ethernet header (14 bytes) |
| * - payload |
| * - (optional padding byte, if needed so length becomes odd) |
| * - nc_trailer |
| * |
| * This framing is to be avoided for non-NetChip devices. |
| */ |
| |
| struct nc_header { // packed: |
| __le16 hdr_len; // sizeof nc_header (LE, all) |
| __le16 packet_len; // payload size (including ethhdr) |
| __le16 packet_id; // detects dropped packets |
| #define MIN_HEADER 6 |
| |
| // all else is optional, and must start with: |
| // __le16 vendorId; // from usb-if |
| // __le16 productId; |
| } __attribute__((__packed__)); |
| |
| #define PAD_BYTE ((unsigned char)0xAC) |
| |
| struct nc_trailer { |
| __le16 packet_id; |
| } __attribute__((__packed__)); |
| |
| // packets may use FLAG_FRAMING_NC and optional pad |
| #define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \ |
| + sizeof (struct ethhdr) \ |
| + (mtu) \ |
| + 1 \ |
| + sizeof (struct nc_trailer)) |
| |
| #define MIN_FRAMED FRAMED_SIZE(0) |
| |
| /* packets _could_ be up to 64KB... */ |
| #define NC_MAX_PACKET 32767 |
| |
| |
| /* |
| * Zero means no timeout; else, how long a 64 byte bulk packet may be queued |
| * before the hardware drops it. If that's done, the driver will need to |
| * frame network packets to guard against the dropped USB packets. The win32 |
| * driver sets this for both sides of the link. |
| */ |
| #define NC_READ_TTL_MS ((u8)255) // ms |
| |
| /* |
| * We ignore most registers and EEPROM contents. |
| */ |
| #define REG_USBCTL ((u8)0x04) |
| #define REG_TTL ((u8)0x10) |
| #define REG_STATUS ((u8)0x11) |
| |
| /* |
| * Vendor specific requests to read/write data |
| */ |
| #define REQUEST_REGISTER ((u8)0x10) |
| #define REQUEST_EEPROM ((u8)0x11) |
| |
| static int |
| nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr) |
| { |
| int status = usb_control_msg(dev->udev, |
| usb_rcvctrlpipe(dev->udev, 0), |
| req, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, regnum, |
| retval_ptr, sizeof *retval_ptr, |
| USB_CTRL_GET_TIMEOUT); |
| if (status > 0) |
| status = 0; |
| if (!status) |
| le16_to_cpus(retval_ptr); |
| return status; |
| } |
| |
| static inline int |
| nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr) |
| { |
| return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr); |
| } |
| |
| // no retval ... can become async, usable in_interrupt() |
| static void |
| nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value) |
| { |
| usb_control_msg(dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| req, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, regnum, |
| NULL, 0, // data is in setup packet |
| USB_CTRL_SET_TIMEOUT); |
| } |
| |
| static inline void |
| nc_register_write(struct usbnet *dev, u8 regnum, u16 value) |
| { |
| nc_vendor_write(dev, REQUEST_REGISTER, regnum, value); |
| } |
| |
| |
| #if 0 |
| static void nc_dump_registers(struct usbnet *dev) |
| { |
| u8 reg; |
| u16 *vp = kmalloc(sizeof (u16)); |
| |
| if (!vp) { |
| dbg("no memory?"); |
| return; |
| } |
| |
| dbg("%s registers:", dev->net->name); |
| for (reg = 0; reg < 0x20; reg++) { |
| int retval; |
| |
| // reading some registers is trouble |
| if (reg >= 0x08 && reg <= 0xf) |
| continue; |
| if (reg >= 0x12 && reg <= 0x1e) |
| continue; |
| |
| retval = nc_register_read(dev, reg, vp); |
| if (retval < 0) |
| dbg("%s reg [0x%x] ==> error %d", |
| dev->net->name, reg, retval); |
| else |
| dbg("%s reg [0x%x] = 0x%x", |
| dev->net->name, reg, *vp); |
| } |
| kfree(vp); |
| } |
| #endif |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Control register |
| */ |
| |
| #define USBCTL_WRITABLE_MASK 0x1f0f |
| // bits 15-13 reserved, r/o |
| #define USBCTL_ENABLE_LANG (1 << 12) |
| #define USBCTL_ENABLE_MFGR (1 << 11) |
| #define USBCTL_ENABLE_PROD (1 << 10) |
| #define USBCTL_ENABLE_SERIAL (1 << 9) |
| #define USBCTL_ENABLE_DEFAULTS (1 << 8) |
| // bits 7-4 reserved, r/o |
| #define USBCTL_FLUSH_OTHER (1 << 3) |
| #define USBCTL_FLUSH_THIS (1 << 2) |
| #define USBCTL_DISCONN_OTHER (1 << 1) |
| #define USBCTL_DISCONN_THIS (1 << 0) |
| |
| static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl) |
| { |
| if (!netif_msg_link(dev)) |
| return; |
| devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;" |
| " this%s%s;" |
| " other%s%s; r/o 0x%x", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| usbctl, |
| (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "", |
| (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "", |
| (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "", |
| (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "", |
| (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "", |
| |
| (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "", |
| (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "", |
| (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "", |
| (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "", |
| usbctl & ~USBCTL_WRITABLE_MASK |
| ); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * Status register |
| */ |
| |
| #define STATUS_PORT_A (1 << 15) |
| |
| #define STATUS_CONN_OTHER (1 << 14) |
| #define STATUS_SUSPEND_OTHER (1 << 13) |
| #define STATUS_MAILBOX_OTHER (1 << 12) |
| #define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03) |
| |
| #define STATUS_CONN_THIS (1 << 6) |
| #define STATUS_SUSPEND_THIS (1 << 5) |
| #define STATUS_MAILBOX_THIS (1 << 4) |
| #define STATUS_PACKETS_THIS(n) (((n) >> 0) & 0x03) |
| |
| #define STATUS_UNSPEC_MASK 0x0c8c |
| #define STATUS_NOISE_MASK ((u16)~(0x0303|STATUS_UNSPEC_MASK)) |
| |
| |
| static inline void nc_dump_status(struct usbnet *dev, u16 status) |
| { |
| if (!netif_msg_link(dev)) |
| return; |
| devdbg(dev, "net1080 %s-%s status 0x%x:" |
| " this (%c) PKT=%d%s%s%s;" |
| " other PKT=%d%s%s%s; unspec 0x%x", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| status, |
| |
| // XXX the packet counts don't seem right |
| // (1 at reset, not 0); maybe UNSPEC too |
| |
| (status & STATUS_PORT_A) ? 'A' : 'B', |
| STATUS_PACKETS_THIS(status), |
| (status & STATUS_CONN_THIS) ? " CON" : "", |
| (status & STATUS_SUSPEND_THIS) ? " SUS" : "", |
| (status & STATUS_MAILBOX_THIS) ? " MBOX" : "", |
| |
| STATUS_PACKETS_OTHER(status), |
| (status & STATUS_CONN_OTHER) ? " CON" : "", |
| (status & STATUS_SUSPEND_OTHER) ? " SUS" : "", |
| (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "", |
| |
| status & STATUS_UNSPEC_MASK |
| ); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * TTL register |
| */ |
| |
| #define TTL_THIS(ttl) (0x00ff & ttl) |
| #define TTL_OTHER(ttl) (0x00ff & (ttl >> 8)) |
| #define MK_TTL(this,other) ((u16)(((other)<<8)|(0x00ff&(this)))) |
| |
| static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl) |
| { |
| if (netif_msg_link(dev)) |
| devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d", |
| dev->udev->bus->bus_name, dev->udev->devpath, |
| ttl, TTL_THIS(ttl), TTL_OTHER(ttl)); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int net1080_reset(struct usbnet *dev) |
| { |
| u16 usbctl, status, ttl; |
| u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL); |
| int retval; |
| |
| if (!vp) |
| return -ENOMEM; |
| |
| // nc_dump_registers(dev); |
| |
| if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) { |
| dbg("can't read %s-%s status: %d", |
| dev->udev->bus->bus_name, dev->udev->devpath, retval); |
| goto done; |
| } |
| status = *vp; |
| nc_dump_status(dev, status); |
| |
| if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) { |
| dbg("can't read USBCTL, %d", retval); |
| goto done; |
| } |
| usbctl = *vp; |
| nc_dump_usbctl(dev, usbctl); |
| |
| nc_register_write(dev, REG_USBCTL, |
| USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER); |
| |
| if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) { |
| dbg("can't read TTL, %d", retval); |
| goto done; |
| } |
| ttl = *vp; |
| // nc_dump_ttl(dev, ttl); |
| |
| nc_register_write(dev, REG_TTL, |
| MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) ); |
| dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS); |
| |
| if (netif_msg_link(dev)) |
| devinfo(dev, "port %c, peer %sconnected", |
| (status & STATUS_PORT_A) ? 'A' : 'B', |
| (status & STATUS_CONN_OTHER) ? "" : "dis" |
| ); |
| retval = 0; |
| |
| done: |
| kfree(vp); |
| return retval; |
| } |
| |
| static int net1080_check_connect(struct usbnet *dev) |
| { |
| int retval; |
| u16 status; |
| u16 *vp = kmalloc(sizeof (u16), GFP_KERNEL); |
| |
| if (!vp) |
| return -ENOMEM; |
| retval = nc_register_read(dev, REG_STATUS, vp); |
| status = *vp; |
| kfree(vp); |
| if (retval != 0) { |
| dbg("%s net1080_check_conn read - %d", dev->net->name, retval); |
| return retval; |
| } |
| if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER) |
| return -ENOLINK; |
| return 0; |
| } |
| |
| static void nc_flush_complete(struct urb *urb) |
| { |
| kfree(urb->context); |
| usb_free_urb(urb); |
| } |
| |
| static void nc_ensure_sync(struct usbnet *dev) |
| { |
| dev->frame_errors++; |
| if (dev->frame_errors > 5) { |
| struct urb *urb; |
| struct usb_ctrlrequest *req; |
| int status; |
| |
| /* Send a flush */ |
| urb = usb_alloc_urb(0, GFP_ATOMIC); |
| if (!urb) |
| return; |
| |
| req = kmalloc(sizeof *req, GFP_ATOMIC); |
| if (!req) { |
| usb_free_urb(urb); |
| return; |
| } |
| |
| req->bRequestType = USB_DIR_OUT |
| | USB_TYPE_VENDOR |
| | USB_RECIP_DEVICE; |
| req->bRequest = REQUEST_REGISTER; |
| req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS |
| | USBCTL_FLUSH_OTHER); |
| req->wIndex = cpu_to_le16(REG_USBCTL); |
| req->wLength = cpu_to_le16(0); |
| |
| /* queue an async control request, we don't need |
| * to do anything when it finishes except clean up. |
| */ |
| usb_fill_control_urb(urb, dev->udev, |
| usb_sndctrlpipe(dev->udev, 0), |
| (unsigned char *) req, |
| NULL, 0, |
| nc_flush_complete, req); |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status) { |
| kfree(req); |
| usb_free_urb(urb); |
| return; |
| } |
| |
| if (netif_msg_rx_err(dev)) |
| devdbg(dev, "flush net1080; too many framing errors"); |
| dev->frame_errors = 0; |
| } |
| } |
| |
| static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct nc_header *header; |
| struct nc_trailer *trailer; |
| u16 hdr_len, packet_len; |
| |
| if (!(skb->len & 0x01)) { |
| #ifdef DEBUG |
| struct net_device *net = dev->net; |
| dbg("rx framesize %d range %d..%d mtu %d", skb->len, |
| net->hard_header_len, dev->hard_mtu, net->mtu); |
| #endif |
| dev->stats.rx_frame_errors++; |
| nc_ensure_sync(dev); |
| return 0; |
| } |
| |
| header = (struct nc_header *) skb->data; |
| hdr_len = le16_to_cpup(&header->hdr_len); |
| packet_len = le16_to_cpup(&header->packet_len); |
| if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) { |
| dev->stats.rx_frame_errors++; |
| dbg("packet too big, %d", packet_len); |
| nc_ensure_sync(dev); |
| return 0; |
| } else if (hdr_len < MIN_HEADER) { |
| dev->stats.rx_frame_errors++; |
| dbg("header too short, %d", hdr_len); |
| nc_ensure_sync(dev); |
| return 0; |
| } else if (hdr_len > MIN_HEADER) { |
| // out of band data for us? |
| dbg("header OOB, %d bytes", hdr_len - MIN_HEADER); |
| nc_ensure_sync(dev); |
| // switch (vendor/product ids) { ... } |
| } |
| skb_pull(skb, hdr_len); |
| |
| trailer = (struct nc_trailer *) |
| (skb->data + skb->len - sizeof *trailer); |
| skb_trim(skb, skb->len - sizeof *trailer); |
| |
| if ((packet_len & 0x01) == 0) { |
| if (skb->data [packet_len] != PAD_BYTE) { |
| dev->stats.rx_frame_errors++; |
| dbg("bad pad"); |
| return 0; |
| } |
| skb_trim(skb, skb->len - 1); |
| } |
| if (skb->len != packet_len) { |
| dev->stats.rx_frame_errors++; |
| dbg("bad packet len %d (expected %d)", |
| skb->len, packet_len); |
| nc_ensure_sync(dev); |
| return 0; |
| } |
| if (header->packet_id != get_unaligned(&trailer->packet_id)) { |
| dev->stats.rx_fifo_errors++; |
| dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x", |
| le16_to_cpu(header->packet_id), |
| le16_to_cpu(trailer->packet_id)); |
| return 0; |
| } |
| #if 0 |
| devdbg(dev, "frame <rx h %d p %d id %d", header->hdr_len, |
| header->packet_len, header->packet_id); |
| #endif |
| dev->frame_errors = 0; |
| return 1; |
| } |
| |
| static struct sk_buff * |
| net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) |
| { |
| struct sk_buff *skb2; |
| struct nc_header *header = NULL; |
| struct nc_trailer *trailer = NULL; |
| int padlen = sizeof (struct nc_trailer); |
| int len = skb->len; |
| |
| if (!((len + padlen + sizeof (struct nc_header)) & 0x01)) |
| padlen++; |
| if (!skb_cloned(skb)) { |
| int headroom = skb_headroom(skb); |
| int tailroom = skb_tailroom(skb); |
| |
| if (padlen <= tailroom && |
| sizeof(struct nc_header) <= headroom) |
| /* There's enough head and tail room */ |
| goto encapsulate; |
| |
| if ((sizeof (struct nc_header) + padlen) < |
| (headroom + tailroom)) { |
| /* There's enough total room, so just readjust */ |
| skb->data = memmove(skb->head |
| + sizeof (struct nc_header), |
| skb->data, skb->len); |
| skb->tail = skb->data + len; |
| goto encapsulate; |
| } |
| } |
| |
| /* Create a new skb to use with the correct size */ |
| skb2 = skb_copy_expand(skb, |
| sizeof (struct nc_header), |
| padlen, |
| flags); |
| dev_kfree_skb_any(skb); |
| if (!skb2) |
| return skb2; |
| skb = skb2; |
| |
| encapsulate: |
| /* header first */ |
| header = (struct nc_header *) skb_push(skb, sizeof *header); |
| header->hdr_len = cpu_to_le16(sizeof (*header)); |
| header->packet_len = cpu_to_le16(len); |
| header->packet_id = cpu_to_le16((u16)dev->xid++); |
| |
| /* maybe pad; then trailer */ |
| if (!((skb->len + sizeof *trailer) & 0x01)) |
| *skb_put(skb, 1) = PAD_BYTE; |
| trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer); |
| put_unaligned(header->packet_id, &trailer->packet_id); |
| #if 0 |
| devdbg(dev, "frame >tx h %d p %d id %d", |
| header->hdr_len, header->packet_len, |
| header->packet_id); |
| #endif |
| return skb; |
| } |
| |
| static int net1080_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| unsigned extra = sizeof (struct nc_header) |
| + 1 |
| + sizeof (struct nc_trailer); |
| |
| dev->net->hard_header_len += extra; |
| dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu; |
| dev->hard_mtu = NC_MAX_PACKET; |
| return usbnet_get_endpoints (dev, intf); |
| } |
| |
| static const struct driver_info net1080_info = { |
| .description = "NetChip TurboCONNECT", |
| .flags = FLAG_FRAMING_NC, |
| .bind = net1080_bind, |
| .reset = net1080_reset, |
| .check_connect = net1080_check_connect, |
| .rx_fixup = net1080_rx_fixup, |
| .tx_fixup = net1080_tx_fixup, |
| }; |
| |
| static const struct usb_device_id products [] = { |
| { |
| USB_DEVICE(0x0525, 0x1080), // NetChip ref design |
| .driver_info = (unsigned long) &net1080_info, |
| }, { |
| USB_DEVICE(0x06D0, 0x0622), // Laplink Gold |
| .driver_info = (unsigned long) &net1080_info, |
| }, |
| { }, // END |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver net1080_driver = { |
| .name = "net1080", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| }; |
| |
| static int __init net1080_init(void) |
| { |
| return usb_register(&net1080_driver); |
| } |
| module_init(net1080_init); |
| |
| static void __exit net1080_exit(void) |
| { |
| usb_deregister(&net1080_driver); |
| } |
| module_exit(net1080_exit); |
| |
| MODULE_AUTHOR("David Brownell"); |
| MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links"); |
| MODULE_LICENSE("GPL"); |