[media] em28xx: add support for PCTV DVB-S2 Stick 460e [2013:024f]
It is based of...
* Empia EM28174
* NXP TDA10071 & Conexant CX24118A combo
* Allegro A8293
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 281ee42..f6f622e 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -41,6 +41,8 @@
select DVB_CXD2820R if !DVB_FE_CUSTOMISE
select DVB_DRXK if !DVB_FE_CUSTOMISE
select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE
+ select DVB_TDA10071 if !DVB_FE_CUSTOMISE
+ select DVB_A8293 if !DVB_FE_CUSTOMISE
select VIDEOBUF_DVB
---help---
This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 013e946..8845ff8 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -317,6 +317,25 @@
};
#endif
+/* 2013:024f PCTV DVB-S2 Stick 460e
+ * GPIO_0 - POWER_ON
+ * GPIO_1 - BOOST
+ * GPIO_2 - VUV_LNB (red LED)
+ * GPIO_3 - EXT_12V
+ * GPIO_4 - INT_DEM (DEMOD GPIO_0)
+ * GPIO_5 - INT_LNB
+ * GPIO_6 - RESET_DEM
+ * GPIO_7 - LED (green LED)
+ */
+static struct em28xx_reg_seq pctv_460e[] = {
+ {EM2874_R80_GPIO, 0x01, 0xff, 50},
+ {0x0d, 0xff, 0xff, 50},
+ {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */
+ {0x0d, 0x42, 0xff, 50},
+ {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
@@ -1810,6 +1829,17 @@
.has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD,
},
+ /* 2013:024f PCTV DVB-S2 Stick 460e
+ * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */
+ [EM28174_BOARD_PCTV_460E] = {
+ .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
+ EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ,
+ .name = "PCTV DVB-S2 Stick (460e)",
+ .tuner_type = TUNER_ABSENT,
+ .tuner_gpio = pctv_460e,
+ .has_dvb = 1,
+ .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
+ },
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@@ -1941,6 +1971,8 @@
.driver_info = EM2870_BOARD_KWORLD_A340 },
{ USB_DEVICE(0x2013, 0x024f),
.driver_info = EM28174_BOARD_PCTV_290E },
+ { USB_DEVICE(0x2013, 0x024c),
+ .driver_info = EM28174_BOARD_PCTV_460E },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 62b558d..cef7a2d 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -42,6 +42,8 @@
#include "cxd2820r.h"
#include "tda18271c2dd.h"
#include "drxk.h"
+#include "tda10071.h"
+#include "a8293.h"
MODULE_DESCRIPTION("driver for em28xx based DVB cards");
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -441,6 +443,19 @@
.gate = TDA18271_GATE_DIGITAL,
};
+static const struct tda10071_config em28xx_tda10071_config = {
+ .i2c_address = 0x55, /* (0xaa >> 1) */
+ .i2c_wr_max = 64,
+ .ts_mode = TDA10071_TS_SERIAL,
+ .spec_inv = 0,
+ .xtal = 40444000, /* 40.444 MHz */
+ .pll_multiplier = 20,
+};
+
+static const struct a8293_config em28xx_a8293_config = {
+ .i2c_addr = 0x08, /* (0x10 >> 1) */
+};
+
/* ------------------------------------------------------------------ */
static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev)
@@ -808,6 +823,16 @@
sizeof(dvb->fe[0]->ops.tuner_ops));
break;
+ case EM28174_BOARD_PCTV_460E:
+ /* attach demod */
+ dvb->fe[0] = dvb_attach(tda10071_attach,
+ &em28xx_tda10071_config, &dev->i2c_adap);
+
+ /* attach SEC */
+ if (dvb->fe[0])
+ dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap,
+ &em28xx_a8293_config);
+ break;
default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n");
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index d80658b..1626e4a 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -120,6 +120,7 @@
#define EM2874_BOARD_LEADERSHIP_ISDBT 77
#define EM28174_BOARD_PCTV_290E 78
#define EM2884_BOARD_TERRATEC_H5 79
+#define EM28174_BOARD_PCTV_460E 80
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4