sbp2: Merge TYPE_RBC and 10byte removal patch from scsi maintainers.
Added more cleanups to remove unused code.
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f7e18cc..d53c8cf 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1089,16 +1089,6 @@
**************************************/
/*
- * This function determines if we should convert scsi commands for a particular sbp2 device type
- */
-static __inline__ int sbp2_command_conversion_device_type(u8 device_type)
-{
- return (((device_type == TYPE_DISK) ||
- (device_type == TYPE_RBC) ||
- (device_type == TYPE_ROM)) ? 1:0);
-}
-
-/*
* This function queries the device for the maximum concurrent logins it
* supports.
*/
@@ -2106,11 +2096,6 @@
sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg,
request_bufflen, SCpnt->request_buffer,
SCpnt->sc_data_direction);
- /*
- * Update our cdb if necessary (to handle sbp2 RBC command set
- * differences). This is where the command set hacks go! =)
- */
- sbp2_check_sbp2_command(scsi_id, command->command_orb.cdb);
sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb),
"sbp2 command orb", command->command_orb_dma);
@@ -2130,110 +2115,6 @@
/*
- * This function deals with command set differences between Linux scsi
- * command set and sbp2 RBC command set.
- */
-static void sbp2_check_sbp2_command(struct scsi_id_instance_data *scsi_id, unchar *cmd)
-{
- unchar new_cmd[16];
- u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
-
- SBP2_DEBUG("sbp2_check_sbp2_command");
-
- switch (*cmd) {
-
- case READ_6:
-
- if (sbp2_command_conversion_device_type(device_type)) {
-
- SBP2_DEBUG("Convert READ_6 to READ_10");
-
- /*
- * Need to turn read_6 into read_10
- */
- new_cmd[0] = 0x28;
- new_cmd[1] = (cmd[1] & 0xe0);
- new_cmd[2] = 0x0;
- new_cmd[3] = (cmd[1] & 0x1f);
- new_cmd[4] = cmd[2];
- new_cmd[5] = cmd[3];
- new_cmd[6] = 0x0;
- new_cmd[7] = 0x0;
- new_cmd[8] = cmd[4];
- new_cmd[9] = cmd[5];
-
- memcpy(cmd, new_cmd, 10);
-
- }
-
- break;
-
- case WRITE_6:
-
- if (sbp2_command_conversion_device_type(device_type)) {
-
- SBP2_DEBUG("Convert WRITE_6 to WRITE_10");
-
- /*
- * Need to turn write_6 into write_10
- */
- new_cmd[0] = 0x2a;
- new_cmd[1] = (cmd[1] & 0xe0);
- new_cmd[2] = 0x0;
- new_cmd[3] = (cmd[1] & 0x1f);
- new_cmd[4] = cmd[2];
- new_cmd[5] = cmd[3];
- new_cmd[6] = 0x0;
- new_cmd[7] = 0x0;
- new_cmd[8] = cmd[4];
- new_cmd[9] = cmd[5];
-
- memcpy(cmd, new_cmd, 10);
-
- }
-
- break;
-
- case MODE_SENSE:
-
- if (sbp2_command_conversion_device_type(device_type)) {
-
- SBP2_DEBUG("Convert MODE_SENSE_6 to MODE_SENSE_10");
-
- /*
- * Need to turn mode_sense_6 into mode_sense_10
- */
- new_cmd[0] = 0x5a;
- new_cmd[1] = cmd[1];
- new_cmd[2] = cmd[2];
- new_cmd[3] = 0x0;
- new_cmd[4] = 0x0;
- new_cmd[5] = 0x0;
- new_cmd[6] = 0x0;
- new_cmd[7] = 0x0;
- new_cmd[8] = cmd[4];
- new_cmd[9] = cmd[5];
-
- memcpy(cmd, new_cmd, 10);
-
- }
-
- break;
-
- case MODE_SELECT:
-
- /*
- * TODO. Probably need to change mode select to 10 byte version
- */
-
- default:
- break;
- }
-
- return;
-}
-
-/*
* Translates SBP-2 status into SCSI sense data for check conditions
*/
static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data)
@@ -2271,7 +2152,6 @@
struct scsi_cmnd *SCpnt)
{
u8 *scsi_buf = SCpnt->request_buffer;
- u8 device_type = SBP2_DEVICE_TYPE (scsi_id->sbp2_device_type_and_lun);
SBP2_DEBUG("sbp2_check_sbp2_response");
@@ -2296,14 +2176,6 @@
}
/*
- * Check for Simple Direct Access Device and change it to TYPE_DISK
- */
- if ((scsi_buf[0] & 0x1f) == TYPE_RBC) {
- SBP2_DEBUG("Changing TYPE_RBC to TYPE_DISK");
- scsi_buf[0] &= 0xe0;
- }
-
- /*
* Fix ansi revision and response data format
*/
scsi_buf[2] |= 2;
@@ -2311,27 +2183,6 @@
break;
- case MODE_SENSE:
-
- if (sbp2_command_conversion_device_type(device_type)) {
-
- SBP2_DEBUG("Modify mode sense response (10 byte version)");
-
- scsi_buf[0] = scsi_buf[1]; /* Mode data length */
- scsi_buf[1] = scsi_buf[2]; /* Medium type */
- scsi_buf[2] = scsi_buf[3]; /* Device specific parameter */
- scsi_buf[3] = scsi_buf[7]; /* Block descriptor length */
- memcpy(scsi_buf + 4, scsi_buf + 8, scsi_buf[0]);
- }
-
- break;
-
- case MODE_SELECT:
-
- /*
- * TODO. Probably need to change mode select to 10 byte version
- */
-
default:
break;
}
@@ -2713,6 +2564,8 @@
static int sbp2scsi_slave_configure(struct scsi_device *sdev)
{
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
+ sdev->use_10_for_rw = 1;
+ sdev->use_10_for_ms = 1;
return 0;
}