| /* |
| * UIO Hilscher CIF card driver |
| * |
| * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> |
| * Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de> |
| * |
| * Licensed under GPL version 2 only. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/slab.h> |
| #include <linux/uio_driver.h> |
| |
| #include <asm/io.h> |
| |
| #define PLX9030_INTCSR 0x4C |
| #define INTSCR_INT1_ENABLE 0x01 |
| #define INTSCR_INT1_STATUS 0x04 |
| #define INT1_ENABLED_AND_ACTIVE (INTSCR_INT1_ENABLE | INTSCR_INT1_STATUS) |
| |
| #define PCI_SUBVENDOR_ID_PEP 0x1518 |
| #define CIF_SUBDEVICE_PROFIBUS 0x430 |
| #define CIF_SUBDEVICE_DEVICENET 0x432 |
| |
| |
| static irqreturn_t hilscher_handler(int irq, struct uio_info *dev_info) |
| { |
| void __iomem *plx_intscr = dev_info->mem[0].internal_addr |
| + PLX9030_INTCSR; |
| |
| if ((ioread8(plx_intscr) & INT1_ENABLED_AND_ACTIVE) |
| != INT1_ENABLED_AND_ACTIVE) |
| return IRQ_NONE; |
| |
| /* Disable interrupt */ |
| iowrite8(ioread8(plx_intscr) & ~INTSCR_INT1_ENABLE, plx_intscr); |
| return IRQ_HANDLED; |
| } |
| |
| static int hilscher_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| struct uio_info *info; |
| |
| info = kzalloc(sizeof(struct uio_info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| if (pci_enable_device(dev)) |
| goto out_free; |
| |
| if (pci_request_regions(dev, "hilscher")) |
| goto out_disable; |
| |
| info->mem[0].addr = pci_resource_start(dev, 0); |
| if (!info->mem[0].addr) |
| goto out_release; |
| info->mem[0].internal_addr = pci_ioremap_bar(dev, 0); |
| if (!info->mem[0].internal_addr) |
| goto out_release; |
| |
| info->mem[0].size = pci_resource_len(dev, 0); |
| info->mem[0].memtype = UIO_MEM_PHYS; |
| info->mem[1].addr = pci_resource_start(dev, 2); |
| info->mem[1].size = pci_resource_len(dev, 2); |
| info->mem[1].memtype = UIO_MEM_PHYS; |
| switch (id->subdevice) { |
| case CIF_SUBDEVICE_PROFIBUS: |
| info->name = "CIF_Profibus"; |
| break; |
| case CIF_SUBDEVICE_DEVICENET: |
| info->name = "CIF_Devicenet"; |
| break; |
| default: |
| info->name = "CIF_???"; |
| } |
| info->version = "0.0.1"; |
| info->irq = dev->irq; |
| info->irq_flags = IRQF_SHARED; |
| info->handler = hilscher_handler; |
| |
| if (uio_register_device(&dev->dev, info)) |
| goto out_unmap; |
| |
| pci_set_drvdata(dev, info); |
| |
| return 0; |
| out_unmap: |
| iounmap(info->mem[0].internal_addr); |
| out_release: |
| pci_release_regions(dev); |
| out_disable: |
| pci_disable_device(dev); |
| out_free: |
| kfree (info); |
| return -ENODEV; |
| } |
| |
| static void hilscher_pci_remove(struct pci_dev *dev) |
| { |
| struct uio_info *info = pci_get_drvdata(dev); |
| |
| uio_unregister_device(info); |
| pci_release_regions(dev); |
| pci_disable_device(dev); |
| pci_set_drvdata(dev, NULL); |
| iounmap(info->mem[0].internal_addr); |
| |
| kfree (info); |
| } |
| |
| static struct pci_device_id hilscher_pci_ids[] = { |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9030, |
| .subvendor = PCI_SUBVENDOR_ID_PEP, |
| .subdevice = CIF_SUBDEVICE_PROFIBUS, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_PLX, |
| .device = PCI_DEVICE_ID_PLX_9030, |
| .subvendor = PCI_SUBVENDOR_ID_PEP, |
| .subdevice = CIF_SUBDEVICE_DEVICENET, |
| }, |
| { 0, } |
| }; |
| |
| static struct pci_driver hilscher_pci_driver = { |
| .name = "hilscher", |
| .id_table = hilscher_pci_ids, |
| .probe = hilscher_pci_probe, |
| .remove = hilscher_pci_remove, |
| }; |
| |
| module_pci_driver(hilscher_pci_driver); |
| MODULE_DEVICE_TABLE(pci, hilscher_pci_ids); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger"); |