[ARM] 4576/1: CM-X270 machine support
This patch provides core support for CM-X270 platform.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
new file mode 100644
index 0000000..878d3b9
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ *
+ * PCI bios-type initialisation for PCI machines
+ *
+ * Bits taken from various places.
+ *
+ * Copyright (C) 2007 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/arch/cm-x270.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/it8152.h>
+
+unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+
+/*
+ * Only first 64MB of memory can be accessed via PCI.
+ * We use GFP_DMA to allocate safe buffers to do map/unmap.
+ * This is really ugly and we need a better way of specifying
+ * DMA-capable regions of memory.
+ */
+void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+ unsigned long *zhole_size)
+{
+ unsigned int sz = SZ_64M >> PAGE_SHIFT;
+
+ printk(KERN_INFO "Adjusting zones for CM-x270\n");
+
+ /*
+ * Only adjust if > 64M on current system
+ */
+ if (node || (zone_size[0] <= sz))
+ return;
+
+ zone_size[1] = zone_size[0] - sz;
+ zone_size[0] = sz;
+ zhole_size[1] = zhole_size[0];
+ zhole_size[0] = 0;
+}
+
+static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ /* clear our parent irq */
+ GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+
+ it8152_irq_demux(irq, desc);
+}
+
+void __cmx270_pci_init_irq(void)
+{
+ it8152_init_irq();
+ pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
+ set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
+
+ set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
+ cmx270_it8152_irq_demux);
+}
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_ite[10];
+
+void __cmx270_pci_suspend(void)
+{
+ /* save ITE state */
+ sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
+ sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
+ sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
+
+ /* Clear ITE IRQ's */
+ __raw_writel((0), IT8152_INTC_PDCNIRR);
+ __raw_writel((0), IT8152_INTC_LPCNIRR);
+}
+
+void __cmx270_pci_resume(void)
+{
+ /* restore IT8152 state */
+ __raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
+ __raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
+ __raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
+}
+#else
+void cmx270_pci_suspend(void) {}
+void cmx270_pci_resume(void) {}
+#endif
+
+/* PCI IRQ mapping*/
+static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int irq;
+
+ printk(KERN_DEBUG "===> %s: %s slot=%x, pin=%x\n", __FUNCTION__,
+ pci_name(dev), slot, pin);
+
+ irq = it8152_pci_map_irq(dev, slot, pin);
+ if (irq)
+ return irq;
+
+ /*
+ Here comes the ugly part. The routing is baseboard specific,
+ but defining a platform for each possible base of CM-x270 is
+ unrealistic. Here we keep mapping for ATXBase and SB-x270.
+ */
+ /* ATXBASE PCI slot */
+ if (slot == 7)
+ return IT8152_PCI_INTA;
+
+ /* ATXBase/SB-x270 CardBus */
+ if (slot == 8 || slot == 0)
+ return IT8152_PCI_INTB;
+
+ /* ATXBase Ethernet */
+ if (slot == 9)
+ return IT8152_PCI_INTA;
+
+ /* SB-x270 Ethernet */
+ if (slot == 16)
+ return IT8152_PCI_INTA;
+
+ /* PC104+ interrupt routing */
+ if ((slot == 17) || (slot == 19))
+ return IT8152_PCI_INTA;
+ if ((slot == 18) || (slot == 20))
+ return IT8152_PCI_INTB;
+
+ return(0);
+}
+
+static struct pci_bus * __init
+cmx270_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ printk(KERN_INFO "Initializing CM-X270 PCI subsystem\n");
+
+ __raw_writel(0x800, IT8152_PCI_CFG_ADDR);
+ if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
+ printk(KERN_INFO "PCI Bridge found.\n");
+
+ /* set PCI I/O base at 0 */
+ writel(0x848, IT8152_PCI_CFG_ADDR);
+ writel(0, IT8152_PCI_CFG_DATA);
+
+ /* set PCI memory base at 0 */
+ writel(0x840, IT8152_PCI_CFG_ADDR);
+ writel(0, IT8152_PCI_CFG_DATA);
+
+ writel(0x20, IT8152_GPIO_GPDR);
+
+ /* CardBus Controller on ATXbase baseboard */
+ writel(0x4000, IT8152_PCI_CFG_ADDR);
+ if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
+ printk(KERN_INFO "CardBus Bridge found.\n");
+
+ /* Configure socket 0 */
+ writel(0x408C, IT8152_PCI_CFG_ADDR);
+ writel(0x1022, IT8152_PCI_CFG_DATA);
+
+ writel(0x4080, IT8152_PCI_CFG_ADDR);
+ writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+ writel(0x4090, IT8152_PCI_CFG_ADDR);
+ writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+ 0x60440000),
+ IT8152_PCI_CFG_DATA);
+
+ writel(0x4018, IT8152_PCI_CFG_ADDR);
+ writel(0xb0000000, IT8152_PCI_CFG_DATA);
+
+ /* Configure socket 1 */
+ writel(0x418C, IT8152_PCI_CFG_ADDR);
+ writel(0x1022, IT8152_PCI_CFG_DATA);
+
+ writel(0x4180, IT8152_PCI_CFG_ADDR);
+ writel(0x3844d060, IT8152_PCI_CFG_DATA);
+
+ writel(0x4190, IT8152_PCI_CFG_ADDR);
+ writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
+ 0x60440000),
+ IT8152_PCI_CFG_DATA);
+
+ writel(0x4118, IT8152_PCI_CFG_ADDR);
+ writel(0xb0000000, IT8152_PCI_CFG_DATA);
+ }
+ }
+ return it8152_pci_scan_bus(nr, sys);
+}
+
+static struct hw_pci cmx270_pci __initdata = {
+ .swizzle = pci_std_swizzle,
+ .map_irq = cmx270_pci_map_irq,
+ .nr_controllers = 1,
+ .setup = it8152_pci_setup,
+ .scan = cmx270_pci_scan_bus,
+};
+
+static int __init cmx270_init_pci(void)
+{
+ if (machine_is_armcore())
+ pci_common_init(&cmx270_pci);
+
+ return 0;
+}
+
+subsys_initcall(cmx270_init_pci);