| menu "Atmel Non-DT world" |
| |
| config HAVE_AT91_DATAFLASH_CARD |
| bool |
| |
| choice |
| prompt "Atmel AT91 Processor Devices for non DT boards" |
| depends on !ARCH_AT91X40 |
| |
| config ARCH_AT91_NONE |
| bool "None" |
| |
| config ARCH_AT91RM9200 |
| bool "AT91RM9200" |
| select SOC_AT91RM9200 |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| config ARCH_AT91SAM9260 |
| bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20" |
| select SOC_AT91SAM9260 |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| config ARCH_AT91SAM9261 |
| bool "AT91SAM9261 or AT91SAM9G10" |
| select SOC_AT91SAM9261 |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| config ARCH_AT91SAM9263 |
| bool "AT91SAM9263" |
| select SOC_AT91SAM9263 |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| config ARCH_AT91SAM9RL |
| bool "AT91SAM9RL" |
| select SOC_AT91SAM9RL |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| config ARCH_AT91SAM9G45 |
| bool "AT91SAM9G45" |
| select SOC_AT91SAM9G45 |
| select AT91_USE_OLD_CLK |
| select OLD_IRQ_AT91 |
| |
| endchoice |
| |
| config ARCH_AT91SAM9G20 |
| bool |
| select ARCH_AT91SAM9260 |
| |
| config ARCH_AT91SAM9G10 |
| bool |
| select ARCH_AT91SAM9261 |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91RM9200 |
| |
| comment "AT91RM9200 Board Type" |
| |
| config MACH_ONEARM |
| bool "Ajeco 1ARM Single Board Computer" |
| help |
| Select this if you are using Ajeco's 1ARM Single Board Computer. |
| <http://www.ajeco.fi/> |
| |
| config MACH_AT91RM9200EK |
| bool "Atmel AT91RM9200-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> |
| |
| config MACH_CSB337 |
| bool "Cogent CSB337" |
| help |
| Select this if you are using Cogent's CSB337 board. |
| <http://www.cogcomp.com/csb_csb337.htm> |
| |
| config MACH_CSB637 |
| bool "Cogent CSB637" |
| help |
| Select this if you are using Cogent's CSB637 board. |
| <http://www.cogcomp.com/csb_csb637.htm> |
| |
| config MACH_CARMEVA |
| bool "Conitec ARM&EVA" |
| help |
| Select this if you are using Conitec's AT91RM9200-MCU-Module. |
| <http://www.conitec.net/english/linuxboard.php> |
| |
| config MACH_ATEB9200 |
| bool "Embest ATEB9200" |
| help |
| Select this if you are using Embest's ATEB9200 board. |
| <http://www.embedinfo.com/english/product/ATEB9200.asp> |
| |
| config MACH_KB9200 |
| bool "KwikByte KB920x" |
| help |
| Select this if you are using KwikByte's KB920x board. |
| <http://www.kwikbyte.com/KB9202.html> |
| |
| config MACH_PICOTUX2XX |
| bool "picotux 200" |
| help |
| Select this if you are using a picotux 200. |
| <http://www.picotux.com/> |
| |
| config MACH_KAFA |
| bool "Sperry-Sun KAFA board" |
| help |
| Select this if you are using Sperry-Sun's KAFA board. |
| |
| config MACH_ECBAT91 |
| bool "emQbit ECB_AT91 SBC" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using emQbit's ECB_AT91 board. |
| <http://wiki.emqbit.com/free-ecb-at91> |
| |
| config MACH_YL9200 |
| bool "ucDragon YL-9200" |
| help |
| Select this if you are using the ucDragon YL-9200 board. |
| |
| config MACH_CPUAT91 |
| bool "Eukrea CPUAT91" |
| help |
| Select this if you are using the Eukrea Electromatique's |
| CPUAT91 board <http://www.eukrea.com/>. |
| |
| config MACH_ECO920 |
| bool "eco920" |
| help |
| Select this if you are using the eco920 board |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9260 |
| |
| comment "AT91SAM9260 Variants" |
| |
| comment "AT91SAM9260 / AT91SAM9XE Board Type" |
| |
| config MACH_AT91SAM9260EK |
| bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> |
| |
| config MACH_CAM60 |
| bool "KwikByte KB9260 (CAM60) board" |
| help |
| Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. |
| <http://www.kwikbyte.com/KB9260.html> |
| |
| config MACH_SAM9_L9260 |
| bool "Olimex SAM9-L9260 board" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. |
| <http://www.olimex.com/dev/sam9-L9260.html> |
| |
| config MACH_AFEB9260 |
| bool "Custom afeb9260 board v1" |
| help |
| Select this if you are using custom afeb9260 board based on |
| open hardware design. Select this for revision 1 of the board. |
| <svn://194.85.238.22/home/users/george/svn/arm9eb> |
| <http://groups.google.com/group/arm9fpga-evolution-board> |
| |
| config MACH_CPU9260 |
| bool "Eukrea CPU9260 board" |
| help |
| Select this if you are using a Eukrea Electromatique's |
| CPU9260 Board <http://www.eukrea.com/> |
| |
| config MACH_FLEXIBITY |
| bool "Flexibity Connect board" |
| help |
| Select this if you are using Flexibity Connect board |
| <http://www.flexibity.com> |
| |
| comment "AT91SAM9G20 Board Type" |
| |
| config MACH_AT91SAM9G20EK |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit |
| that embeds only one SD/MMC slot. |
| |
| config MACH_AT91SAM9G20EK_2MMC |
| depends on MACH_AT91SAM9G20EK |
| bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" |
| help |
| Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit |
| with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and |
| onwards. |
| <http://www.atmel.com/tools/SAM9G20-EK.aspx> |
| |
| config MACH_CPU9G20 |
| bool "Eukrea CPU9G20 board" |
| help |
| Select this if you are using a Eukrea Electromatique's |
| CPU9G20 Board <http://www.eukrea.com/> |
| |
| config MACH_PORTUXG20 |
| bool "taskit PortuxG20" |
| help |
| Select this if you are using taskit's PortuxG20. |
| <http://www.taskit.de/en/> |
| |
| config MACH_STAMP9G20 |
| bool "taskit Stamp9G20 CPU module" |
| help |
| Select this if you are using taskit's Stamp9G20 CPU module on its |
| evaluation board. |
| <http://www.taskit.de/en/> |
| |
| config MACH_PCONTROL_G20 |
| bool "PControl G20 CPU module" |
| help |
| Select this if you are using taskit's Stamp9G20 CPU module on this |
| carrier board, being the decentralized unit of a building automation |
| system; featuring nvram, eth-switch, iso-rs485, display, io |
| |
| config MACH_GSIA18S |
| bool "GS_IA18_S board" |
| help |
| This enables support for the GS_IA18_S board |
| produced by GeoSIG Ltd company. This is an internet accelerograph. |
| <http://www.geosig.com> |
| |
| config MACH_SNAPPER_9260 |
| bool "Bluewater Systems Snapper 9260/9G20 module" |
| help |
| Select this if you are using the Bluewater Systems Snapper 9260 or |
| Snapper 9G20 modules. |
| <http://www.bluewatersys.com/> |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9261 |
| |
| comment "AT91SAM9261 Board Type" |
| |
| config MACH_AT91SAM9261EK |
| bool "Atmel AT91SAM9261-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
| |
| comment "AT91SAM9G10 Board Type" |
| |
| config MACH_AT91SAM9G10EK |
| bool "Atmel AT91SAM9G10-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9263 |
| |
| comment "AT91SAM9263 Board Type" |
| |
| config MACH_AT91SAM9263EK |
| bool "Atmel AT91SAM9263-EK Evaluation Kit" |
| select HAVE_AT91_DATAFLASH_CARD |
| help |
| Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. |
| <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9RL |
| |
| comment "AT91SAM9RL Board Type" |
| |
| config MACH_AT91SAM9RLEK |
| bool "Atmel AT91SAM9RL-EK Evaluation Kit" |
| help |
| Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91SAM9G45 |
| |
| comment "AT91SAM9G45 Board Type" |
| |
| config MACH_AT91SAM9M10G45EK |
| bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" |
| help |
| Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit. |
| Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10 |
| families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. |
| <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx> |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| if ARCH_AT91X40 |
| |
| comment "AT91X40 Board Type" |
| |
| config MACH_AT91EB01 |
| bool "Atmel AT91EB01 Evaluation Kit" |
| help |
| Select this if you are using Atmel's AT91EB01 Evaluation Kit. |
| It is also a popular target for simulators such as GDB's |
| ARM simulator (commonly known as the ARMulator) and the |
| Skyeye simulator. |
| |
| endif |
| |
| # ---------------------------------------------------------- |
| |
| comment "AT91 Board Options" |
| |
| config MTD_AT91_DATAFLASH_CARD |
| bool "Enable DataFlash Card support" |
| depends on HAVE_AT91_DATAFLASH_CARD |
| help |
| Enable support for the DataFlash card. |
| |
| endmenu |