drm/i915: Add explicit pipe src size to pipe config
Rather that mess about with hdisplay/vdisplay from requested_mode, add
explicit pipe src size information to pipe config.
Now requested_mode is only really relevant for dvo/sdvo output timings.
For everything else either adjusted_mode or pipe src size should be
used.
In many places where we end up using pipe source size, we should
actually use the primary plane size, but we don't currently store
that information explicitly. As long as we treat primaries as full
screen only, we can get away with this. Eventually when we move
primaries over to drm_plane, we need to fix it all up.
v2: Add a comment to explain what pipe_src_{w,h} are
Add a note about primary planes to commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 42114ec..c9dba46 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -50,23 +50,22 @@
struct intel_crtc_config *pipe_config,
int fitting_mode)
{
- struct drm_display_mode *mode, *adjusted_mode;
+ struct drm_display_mode *adjusted_mode;
int x, y, width, height;
- mode = &pipe_config->requested_mode;
adjusted_mode = &pipe_config->adjusted_mode;
x = y = width = height = 0;
/* Native modes don't need fitting */
- if (adjusted_mode->hdisplay == mode->hdisplay &&
- adjusted_mode->vdisplay == mode->vdisplay)
+ if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
+ adjusted_mode->vdisplay == pipe_config->pipe_src_h)
goto done;
switch (fitting_mode) {
case DRM_MODE_SCALE_CENTER:
- width = mode->hdisplay;
- height = mode->vdisplay;
+ width = pipe_config->pipe_src_w;
+ height = pipe_config->pipe_src_h;
x = (adjusted_mode->hdisplay - width + 1)/2;
y = (adjusted_mode->vdisplay - height + 1)/2;
break;
@@ -74,17 +73,17 @@
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the aspect ratio */
{
- u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
- u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+ u32 scaled_width = adjusted_mode->hdisplay * pipe_config->pipe_src_h;
+ u32 scaled_height = pipe_config->pipe_src_w * adjusted_mode->vdisplay;
if (scaled_width > scaled_height) { /* pillar */
- width = scaled_height / mode->vdisplay;
+ width = scaled_height / pipe_config->pipe_src_h;
if (width & 1)
width++;
x = (adjusted_mode->hdisplay - width + 1) / 2;
y = 0;
height = adjusted_mode->vdisplay;
} else if (scaled_width < scaled_height) { /* letter */
- height = scaled_width / mode->hdisplay;
+ height = scaled_width / pipe_config->pipe_src_w;
if (height & 1)
height++;
y = (adjusted_mode->vdisplay - height + 1) / 2;
@@ -176,14 +175,13 @@
{
struct drm_device *dev = intel_crtc->base.dev;
u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
- struct drm_display_mode *mode, *adjusted_mode;
+ struct drm_display_mode *adjusted_mode;
- mode = &pipe_config->requested_mode;
adjusted_mode = &pipe_config->adjusted_mode;
/* Native modes don't need fitting */
- if (adjusted_mode->hdisplay == mode->hdisplay &&
- adjusted_mode->vdisplay == mode->vdisplay)
+ if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
+ adjusted_mode->vdisplay == pipe_config->pipe_src_h)
goto out;
switch (fitting_mode) {
@@ -192,16 +190,16 @@
* For centered modes, we have to calculate border widths &
* heights and modify the values programmed into the CRTC.
*/
- centre_horizontally(adjusted_mode, mode->hdisplay);
- centre_vertically(adjusted_mode, mode->vdisplay);
+ centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
+ centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
border = LVDS_BORDER_ENABLE;
break;
case DRM_MODE_SCALE_ASPECT:
/* Scale but preserve the aspect ratio */
if (INTEL_INFO(dev)->gen >= 4) {
u32 scaled_width = adjusted_mode->hdisplay *
- mode->vdisplay;
- u32 scaled_height = mode->hdisplay *
+ pipe_config->pipe_src_h;
+ u32 scaled_height = pipe_config->pipe_src_w *
adjusted_mode->vdisplay;
/* 965+ is easy, it does everything in hw */
@@ -211,12 +209,12 @@
else if (scaled_width < scaled_height)
pfit_control |= PFIT_ENABLE |
PFIT_SCALING_LETTER;
- else if (adjusted_mode->hdisplay != mode->hdisplay)
+ else if (adjusted_mode->hdisplay != pipe_config->pipe_src_w)
pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
} else {
u32 scaled_width = adjusted_mode->hdisplay *
- mode->vdisplay;
- u32 scaled_height = mode->hdisplay *
+ pipe_config->pipe_src_h;
+ u32 scaled_height = pipe_config->pipe_src_w *
adjusted_mode->vdisplay;
/*
* For earlier chips we have to calculate the scaling
@@ -226,11 +224,11 @@
if (scaled_width > scaled_height) { /* pillar */
centre_horizontally(adjusted_mode,
scaled_height /
- mode->vdisplay);
+ pipe_config->pipe_src_h);
border = LVDS_BORDER_ENABLE;
- if (mode->vdisplay != adjusted_mode->vdisplay) {
- u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+ if (pipe_config->pipe_src_h != adjusted_mode->vdisplay) {
+ u32 bits = panel_fitter_scaling(pipe_config->pipe_src_h, adjusted_mode->vdisplay);
pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
bits << PFIT_VERT_SCALE_SHIFT);
pfit_control |= (PFIT_ENABLE |
@@ -240,11 +238,11 @@
} else if (scaled_width < scaled_height) { /* letter */
centre_vertically(adjusted_mode,
scaled_width /
- mode->hdisplay);
+ pipe_config->pipe_src_w);
border = LVDS_BORDER_ENABLE;
- if (mode->hdisplay != adjusted_mode->hdisplay) {
- u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+ if (pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
+ u32 bits = panel_fitter_scaling(pipe_config->pipe_src_w, adjusted_mode->hdisplay);
pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
bits << PFIT_VERT_SCALE_SHIFT);
pfit_control |= (PFIT_ENABLE |
@@ -265,8 +263,8 @@
* Full scaling, even if it changes the aspect ratio.
* Fortunately this is all done for us in hw.
*/
- if (mode->vdisplay != adjusted_mode->vdisplay ||
- mode->hdisplay != adjusted_mode->hdisplay) {
+ if (pipe_config->pipe_src_h != adjusted_mode->vdisplay ||
+ pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
pfit_control |= PFIT_ENABLE;
if (INTEL_INFO(dev)->gen >= 4)
pfit_control |= PFIT_SCALING_AUTO;